pima 5e3dd3128b Both sensors now run over interrupts in pulse mode. This still needs ...

tweaking as its buggy but works for now on full speed for both sensors.

2026-09-20 19:55:57 +02:00

..

Core

Both sensors now run over interrupts in pulse mode. This still needs

2026-09-20 19:55:57 +02:00

Drivers

Trinity Devboard PCB V1.0 Firmware. FreeRTOS is setup and the MCU reads IMU data over SPI fand Magnetometer data over I2C, each with a seperate task. Sensordata is then run though MadgwickAHRS and send over USB as serial packet data to use in trinity visualizer. Bare minimum functionality works and is replicated from the first prototype.

2026-09-13 19:51:03 +02:00

Middlewares

Trinity Devboard PCB V1.0 Firmware. FreeRTOS is setup and the MCU reads IMU data over SPI fand Magnetometer data over I2C, each with a seperate task. Sensordata is then run though MadgwickAHRS and send over USB as serial packet data to use in trinity visualizer. Bare minimum functionality works and is replicated from the first prototype.

2026-09-13 19:51:03 +02:00

STM32_WPAN/Target

Trinity Devboard PCB V1.0 Firmware. FreeRTOS is setup and the MCU reads IMU data over SPI fand Magnetometer data over I2C, each with a seperate task. Sensordata is then run though MadgwickAHRS and send over USB as serial packet data to use in trinity visualizer. Bare minimum functionality works and is replicated from the first prototype.

2026-09-13 19:51:03 +02:00

USB_Device

Both sensors now run over interrupts in pulse mode. This still needs

2026-09-20 19:55:57 +02:00

Utilities/lpm/tiny_lpm

Trinity Devboard PCB V1.0 Firmware. FreeRTOS is setup and the MCU reads IMU data over SPI fand Magnetometer data over I2C, each with a seperate task. Sensordata is then run though MadgwickAHRS and send over USB as serial packet data to use in trinity visualizer. Bare minimum functionality works and is replicated from the first prototype.

2026-09-13 19:51:03 +02:00

makefile

Trinity Devboard PCB V1.0 Firmware. FreeRTOS is setup and the MCU reads IMU data over SPI fand Magnetometer data over I2C, each with a seperate task. Sensordata is then run though MadgwickAHRS and send over USB as serial packet data to use in trinity visualizer. Bare minimum functionality works and is replicated from the first prototype.

2026-09-13 19:51:03 +02:00

objects.list

Trinity Devboard PCB V1.0 Firmware. FreeRTOS is setup and the MCU reads IMU data over SPI fand Magnetometer data over I2C, each with a seperate task. Sensordata is then run though MadgwickAHRS and send over USB as serial packet data to use in trinity visualizer. Bare minimum functionality works and is replicated from the first prototype.

2026-09-13 19:51:03 +02:00

objects.mk

Trinity Devboard PCB V1.0 Firmware. FreeRTOS is setup and the MCU reads IMU data over SPI fand Magnetometer data over I2C, each with a seperate task. Sensordata is then run though MadgwickAHRS and send over USB as serial packet data to use in trinity visualizer. Bare minimum functionality works and is replicated from the first prototype.

2026-09-13 19:51:03 +02:00

sources.mk

Trinity Devboard PCB V1.0 Firmware. FreeRTOS is setup and the MCU reads IMU data over SPI fand Magnetometer data over I2C, each with a seperate task. Sensordata is then run though MadgwickAHRS and send over USB as serial packet data to use in trinity visualizer. Bare minimum functionality works and is replicated from the first prototype.

2026-09-13 19:51:03 +02:00

Trinity_Devboard_V2.elf

Both sensors now run over interrupts in pulse mode. This still needs

2026-09-20 19:55:57 +02:00

Trinity_Devboard_V2.list

Both sensors now run over interrupts in pulse mode. This still needs

2026-09-20 19:55:57 +02:00

Trinity_Devboard_V2.map

Both sensors now run over interrupts in pulse mode. This still needs

2026-09-20 19:55:57 +02:00