pima 1409bad40b Fixed DMA and INT bugs ...

- Fixed indexed task notifications for INT and DMAf for both sensors
- Fixed the INT debugger startup freeze (added != NULL check in
callbacks)
- Fixed DMA notifications not being read properly/too early
- Changed IMU INT configure/enable function as one
- Added proper DMA checking in IMU calibration

2026-10-03 17:42:33 +02:00

..

CMSIS_RTOS_V2

Fixed DMA and INT bugs

2026-10-03 17:42:33 +02:00

portable

Fixed DMA and INT bugs

2026-10-03 17:42:33 +02:00

croutine.cyclo

Trinity Devboard PCB V1.0 Firmware. FreeRTOS is setup and the MCU reads IMU data over SPI fand Magnetometer data over I2C, each with a seperate task. Sensordata is then run though MadgwickAHRS and send over USB as serial packet data to use in trinity visualizer. Bare minimum functionality works and is replicated from the first prototype.

2026-09-13 19:51:03 +02:00

croutine.d

Fixed DMA and INT bugs

2026-10-03 17:42:33 +02:00

croutine.o

Fixed DMA and INT bugs

2026-10-03 17:42:33 +02:00

croutine.su

Trinity Devboard PCB V1.0 Firmware. FreeRTOS is setup and the MCU reads IMU data over SPI fand Magnetometer data over I2C, each with a seperate task. Sensordata is then run though MadgwickAHRS and send over USB as serial packet data to use in trinity visualizer. Bare minimum functionality works and is replicated from the first prototype.

2026-09-13 19:51:03 +02:00

event_groups.cyclo

Trinity Devboard PCB V1.0 Firmware. FreeRTOS is setup and the MCU reads IMU data over SPI fand Magnetometer data over I2C, each with a seperate task. Sensordata is then run though MadgwickAHRS and send over USB as serial packet data to use in trinity visualizer. Bare minimum functionality works and is replicated from the first prototype.

2026-09-13 19:51:03 +02:00

event_groups.d

Fixed DMA and INT bugs

2026-10-03 17:42:33 +02:00

event_groups.o

Fixed DMA and INT bugs

2026-10-03 17:42:33 +02:00

event_groups.su

Trinity Devboard PCB V1.0 Firmware. FreeRTOS is setup and the MCU reads IMU data over SPI fand Magnetometer data over I2C, each with a seperate task. Sensordata is then run though MadgwickAHRS and send over USB as serial packet data to use in trinity visualizer. Bare minimum functionality works and is replicated from the first prototype.

2026-09-13 19:51:03 +02:00

list.cyclo

Trinity Devboard PCB V1.0 Firmware. FreeRTOS is setup and the MCU reads IMU data over SPI fand Magnetometer data over I2C, each with a seperate task. Sensordata is then run though MadgwickAHRS and send over USB as serial packet data to use in trinity visualizer. Bare minimum functionality works and is replicated from the first prototype.

2026-09-13 19:51:03 +02:00

list.d

Fixed DMA and INT bugs

2026-10-03 17:42:33 +02:00

list.o

Fixed DMA and INT bugs

2026-10-03 17:42:33 +02:00

list.su

Trinity Devboard PCB V1.0 Firmware. FreeRTOS is setup and the MCU reads IMU data over SPI fand Magnetometer data over I2C, each with a seperate task. Sensordata is then run though MadgwickAHRS and send over USB as serial packet data to use in trinity visualizer. Bare minimum functionality works and is replicated from the first prototype.

2026-09-13 19:51:03 +02:00

queue.cyclo

Trinity Devboard PCB V1.0 Firmware. FreeRTOS is setup and the MCU reads IMU data over SPI fand Magnetometer data over I2C, each with a seperate task. Sensordata is then run though MadgwickAHRS and send over USB as serial packet data to use in trinity visualizer. Bare minimum functionality works and is replicated from the first prototype.

2026-09-13 19:51:03 +02:00

queue.d

Fixed DMA and INT bugs

2026-10-03 17:42:33 +02:00

queue.o

Fixed DMA and INT bugs

2026-10-03 17:42:33 +02:00

queue.su

Trinity Devboard PCB V1.0 Firmware. FreeRTOS is setup and the MCU reads IMU data over SPI fand Magnetometer data over I2C, each with a seperate task. Sensordata is then run though MadgwickAHRS and send over USB as serial packet data to use in trinity visualizer. Bare minimum functionality works and is replicated from the first prototype.

2026-09-13 19:51:03 +02:00

stream_buffer.cyclo

Trinity Devboard PCB V1.0 Firmware. FreeRTOS is setup and the MCU reads IMU data over SPI fand Magnetometer data over I2C, each with a seperate task. Sensordata is then run though MadgwickAHRS and send over USB as serial packet data to use in trinity visualizer. Bare minimum functionality works and is replicated from the first prototype.

2026-09-13 19:51:03 +02:00

stream_buffer.d

Fixed DMA and INT bugs

2026-10-03 17:42:33 +02:00

stream_buffer.o

Fixed DMA and INT bugs

2026-10-03 17:42:33 +02:00

stream_buffer.su

Trinity Devboard PCB V1.0 Firmware. FreeRTOS is setup and the MCU reads IMU data over SPI fand Magnetometer data over I2C, each with a seperate task. Sensordata is then run though MadgwickAHRS and send over USB as serial packet data to use in trinity visualizer. Bare minimum functionality works and is replicated from the first prototype.

2026-09-13 19:51:03 +02:00

subdir.mk

Trinity Devboard PCB V1.0 Firmware. FreeRTOS is setup and the MCU reads IMU data over SPI fand Magnetometer data over I2C, each with a seperate task. Sensordata is then run though MadgwickAHRS and send over USB as serial packet data to use in trinity visualizer. Bare minimum functionality works and is replicated from the first prototype.

2026-09-13 19:51:03 +02:00

tasks.cyclo

Fixed DMA and INT bugs

2026-10-03 17:42:33 +02:00

tasks.d

Fixed DMA and INT bugs

2026-10-03 17:42:33 +02:00

tasks.o

Fixed DMA and INT bugs

2026-10-03 17:42:33 +02:00

tasks.su

Fixed DMA and INT bugs

2026-10-03 17:42:33 +02:00

timers.cyclo

Trinity Devboard PCB V1.0 Firmware. FreeRTOS is setup and the MCU reads IMU data over SPI fand Magnetometer data over I2C, each with a seperate task. Sensordata is then run though MadgwickAHRS and send over USB as serial packet data to use in trinity visualizer. Bare minimum functionality works and is replicated from the first prototype.

2026-09-13 19:51:03 +02:00

timers.d

Fixed DMA and INT bugs

2026-10-03 17:42:33 +02:00

timers.o

Fixed DMA and INT bugs

2026-10-03 17:42:33 +02:00

timers.su

Trinity Devboard PCB V1.0 Firmware. FreeRTOS is setup and the MCU reads IMU data over SPI fand Magnetometer data over I2C, each with a seperate task. Sensordata is then run though MadgwickAHRS and send over USB as serial packet data to use in trinity visualizer. Bare minimum functionality works and is replicated from the first prototype.

2026-09-13 19:51:03 +02:00