Trinity Devboard PCB V1.0 Firmware. FreeRTOS is setup and the MCU reads IMU data over SPI fand Magnetometer data over I2C, each with a seperate task. Sensordata is then run though MadgwickAHRS and send over USB as serial packet data to use in trinity visualizer. Bare minimum functionality works and is replicated from the first prototype.

This commit is contained in:
2026-09-13 19:51:03 +02:00
commit 7ee381de58
1630 changed files with 632404 additions and 0 deletions
+132
View File
@@ -0,0 +1,132 @@
/**************************************************************************//**
* @file os_systick.c
* @brief CMSIS OS Tick SysTick implementation
* @version V1.0.1
* @date 24. November 2017
******************************************************************************/
/*
* Copyright (c) 2017-2017 ARM Limited. All rights reserved.
*
* SPDX-License-Identifier: Apache-2.0
*
* Licensed under the Apache License, Version 2.0 (the License); you may
* not use this file except in compliance with the License.
* You may obtain a copy of the License at
*
* www.apache.org/licenses/LICENSE-2.0
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an AS IS BASIS, WITHOUT
* WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
* See the License for the specific language governing permissions and
* limitations under the License.
*/
#include "os_tick.h"
//lint -emacro((923,9078),SCB,SysTick) "cast from unsigned long to pointer"
#include "RTE_Components.h"
#include CMSIS_device_header
#ifdef SysTick
#ifndef SYSTICK_IRQ_PRIORITY
#define SYSTICK_IRQ_PRIORITY 0xFFU
#endif
static uint8_t PendST;
// Setup OS Tick.
__WEAK int32_t OS_Tick_Setup (uint32_t freq, IRQHandler_t handler) {
uint32_t load;
(void)handler;
if (freq == 0U) {
//lint -e{904} "Return statement before end of function"
return (-1);
}
load = (SystemCoreClock / freq) - 1U;
if (load > 0x00FFFFFFU) {
//lint -e{904} "Return statement before end of function"
return (-1);
}
// Set SysTick Interrupt Priority
#if ((defined(__ARM_ARCH_8M_MAIN__) && (__ARM_ARCH_8M_MAIN__ != 0)) || \
(defined(__CORTEX_M) && (__CORTEX_M == 7U)))
SCB->SHPR[11] = SYSTICK_IRQ_PRIORITY;
#elif (defined(__ARM_ARCH_8M_BASE__) && (__ARM_ARCH_8M_BASE__ != 0))
SCB->SHPR[1] |= ((uint32_t)SYSTICK_IRQ_PRIORITY << 24);
#elif ((defined(__ARM_ARCH_7M__) && (__ARM_ARCH_7M__ != 0)) || \
(defined(__ARM_ARCH_7EM__) && (__ARM_ARCH_7EM__ != 0)))
SCB->SHP[11] = SYSTICK_IRQ_PRIORITY;
#elif (defined(__ARM_ARCH_6M__) && (__ARM_ARCH_6M__ != 0))
SCB->SHP[1] |= ((uint32_t)SYSTICK_IRQ_PRIORITY << 24);
#else
#error "Unknown ARM Core!"
#endif
SysTick->CTRL = SysTick_CTRL_CLKSOURCE_Msk | SysTick_CTRL_TICKINT_Msk;
SysTick->LOAD = load;
SysTick->VAL = 0U;
PendST = 0U;
return (0);
}
/// Enable OS Tick.
__WEAK void OS_Tick_Enable (void) {
if (PendST != 0U) {
PendST = 0U;
SCB->ICSR = SCB_ICSR_PENDSTSET_Msk;
}
SysTick->CTRL |= SysTick_CTRL_ENABLE_Msk;
}
/// Disable OS Tick.
__WEAK void OS_Tick_Disable (void) {
SysTick->CTRL &= ~SysTick_CTRL_ENABLE_Msk;
if ((SCB->ICSR & SCB_ICSR_PENDSTSET_Msk) != 0U) {
SCB->ICSR = SCB_ICSR_PENDSTCLR_Msk;
PendST = 1U;
}
}
// Acknowledge OS Tick IRQ.
__WEAK void OS_Tick_AcknowledgeIRQ (void) {
(void)SysTick->CTRL;
}
// Get OS Tick IRQ number.
__WEAK int32_t OS_Tick_GetIRQn (void) {
return ((int32_t)SysTick_IRQn);
}
// Get OS Tick clock.
__WEAK uint32_t OS_Tick_GetClock (void) {
return (SystemCoreClock);
}
// Get OS Tick interval.
__WEAK uint32_t OS_Tick_GetInterval (void) {
return (SysTick->LOAD + 1U);
}
// Get OS Tick count value.
__WEAK uint32_t OS_Tick_GetCount (void) {
uint32_t load = SysTick->LOAD;
return (load - SysTick->VAL);
}
// Get OS Tick overflow status.
__WEAK uint32_t OS_Tick_GetOverflow (void) {
return ((SysTick->CTRL >> 16) & 1U);
}
#endif // SysTick