pima/Trinity-DevPCB-V1.0
1
0
Fork 0
Code Issues Pull Requests Actions Packages Projects Releases Wiki Activity

Trinity Devboard PCB V1.0 Firmware. FreeRTOS is setup and the MCU reads IMU data over SPI fand Magnetometer data over I2C, each with a seperate task. Sensordata is then run though MadgwickAHRS and send over USB as serial packet data to use in trinity visualizer. Bare minimum functionality works and is replicated from the first prototype.

Browse Source
This commit is contained in:
pima
2026-09-13 19:51:03 +02:00
commit 7ee381de58
1630 changed files with 632404 additions and 0 deletions
Download Patch File Download Diff File Expand all files Collapse all files
Drivers/CMSIS/NN/NN_Lib_Tests/nn_test/RTE/Device/ARMCM0/startup_ARMCM0.s
+242
View File
@@ -0,0 +1,242 @@
;/**************************************************************************//**
; * @file startup_ARMCM0.s
; * @brief CMSIS Core Device Startup File for
; * ARMCM0 Device Series
; * @version V5.00
; * @date 02. March 2016
; ******************************************************************************/
;/*
; * Copyright (c) 2009-2016 ARM Limited. All rights reserved.
; *
; * SPDX-License-Identifier: Apache-2.0
; *
; * Licensed under the Apache License, Version 2.0 (the License); you may
; * not use this file except in compliance with the License.
; * You may obtain a copy of the License at
; *
; * www.apache.org/licenses/LICENSE-2.0
; *
; * Unless required by applicable law or agreed to in writing, software
; * distributed under the License is distributed on an AS IS BASIS, WITHOUT
; * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
; * See the License for the specific language governing permissions and
; * limitations under the License.
; */
;/*
;//-------- <<< Use Configuration Wizard in Context Menu >>> ------------------
;*/
; <h> Stack Configuration
; <o> Stack Size (in Bytes) <0x0-0xFFFFFFFF:8>
; </h>
Stack_Size EQU 0x00000400
AREA STACK, NOINIT, READWRITE, ALIGN=3
Stack_Mem SPACE Stack_Size
__initial_sp
; <h> Heap Configuration
; <o> Heap Size (in Bytes) <0x0-0xFFFFFFFF:8>
; </h>
Heap_Size EQU 0x00000C00
AREA HEAP, NOINIT, READWRITE, ALIGN=3
__heap_base
Heap_Mem SPACE Heap_Size
__heap_limit
PRESERVE8
THUMB
; Vector Table Mapped to Address 0 at Reset
AREA RESET, DATA, READONLY
EXPORT __Vectors
EXPORT __Vectors_End
EXPORT __Vectors_Size
__Vectors DCD __initial_sp ; Top of Stack
DCD Reset_Handler ; Reset Handler
DCD NMI_Handler ; NMI Handler
DCD HardFault_Handler ; Hard Fault Handler
DCD 0 ; Reserved
DCD 0 ; Reserved
DCD 0 ; Reserved
DCD 0 ; Reserved
DCD 0 ; Reserved
DCD 0 ; Reserved
DCD 0 ; Reserved
DCD SVC_Handler ; SVCall Handler
DCD 0 ; Reserved
DCD 0 ; Reserved
DCD PendSV_Handler ; PendSV Handler
DCD SysTick_Handler ; SysTick Handler
; External Interrupts
DCD WDT_IRQHandler ; 0: Watchdog Timer
DCD RTC_IRQHandler ; 1: Real Time Clock
DCD TIM0_IRQHandler ; 2: Timer0 / Timer1
DCD TIM2_IRQHandler ; 3: Timer2 / Timer3
DCD MCIA_IRQHandler ; 4: MCIa
DCD MCIB_IRQHandler ; 5: MCIb
DCD UART0_IRQHandler ; 6: UART0 - DUT FPGA
DCD UART1_IRQHandler ; 7: UART1 - DUT FPGA
DCD UART2_IRQHandler ; 8: UART2 - DUT FPGA
DCD UART4_IRQHandler ; 9: UART4 - not connected
DCD AACI_IRQHandler ; 10: AACI / AC97
DCD CLCD_IRQHandler ; 11: CLCD Combined Interrupt
DCD ENET_IRQHandler ; 12: Ethernet
DCD USBDC_IRQHandler ; 13: USB Device
DCD USBHC_IRQHandler ; 14: USB Host Controller
DCD CHLCD_IRQHandler ; 15: Character LCD
DCD FLEXRAY_IRQHandler ; 16: Flexray
DCD CAN_IRQHandler ; 17: CAN
DCD LIN_IRQHandler ; 18: LIN
DCD I2C_IRQHandler ; 19: I2C ADC/DAC
DCD 0 ; 20: Reserved
DCD 0 ; 21: Reserved
DCD 0 ; 22: Reserved
DCD 0 ; 23: Reserved
DCD 0 ; 24: Reserved
DCD 0 ; 25: Reserved
DCD 0 ; 26: Reserved
DCD 0 ; 27: Reserved
DCD CPU_CLCD_IRQHandler ; 28: Reserved - CPU FPGA CLCD
DCD 0 ; 29: Reserved - CPU FPGA
DCD UART3_IRQHandler ; 30: UART3 - CPU FPGA
DCD SPI_IRQHandler ; 31: SPI Touchscreen - CPU FPGA
__Vectors_End
__Vectors_Size EQU __Vectors_End - __Vectors
AREA |.text|, CODE, READONLY
; Reset Handler
Reset_Handler PROC
EXPORT Reset_Handler [WEAK]
IMPORT SystemInit
IMPORT __main
LDR R0, =SystemInit
BLX R0
LDR R0, =__main
BX R0
ENDP
; Dummy Exception Handlers (infinite loops which can be modified)
NMI_Handler PROC
EXPORT NMI_Handler [WEAK]
B .
ENDP
HardFault_Handler\
PROC
EXPORT HardFault_Handler [WEAK]
B .
ENDP
SVC_Handler PROC
EXPORT SVC_Handler [WEAK]
B .
ENDP
PendSV_Handler PROC
EXPORT PendSV_Handler [WEAK]
B .
ENDP
SysTick_Handler PROC
EXPORT SysTick_Handler [WEAK]
B .
ENDP
Default_Handler PROC
EXPORT WDT_IRQHandler [WEAK]
EXPORT RTC_IRQHandler [WEAK]
EXPORT TIM0_IRQHandler [WEAK]
EXPORT TIM2_IRQHandler [WEAK]
EXPORT MCIA_IRQHandler [WEAK]
EXPORT MCIB_IRQHandler [WEAK]
EXPORT UART0_IRQHandler [WEAK]
EXPORT UART1_IRQHandler [WEAK]
EXPORT UART2_IRQHandler [WEAK]
EXPORT UART3_IRQHandler [WEAK]
EXPORT UART4_IRQHandler [WEAK]
EXPORT AACI_IRQHandler [WEAK]
EXPORT CLCD_IRQHandler [WEAK]
EXPORT ENET_IRQHandler [WEAK]
EXPORT USBDC_IRQHandler [WEAK]
EXPORT USBHC_IRQHandler [WEAK]
EXPORT CHLCD_IRQHandler [WEAK]
EXPORT FLEXRAY_IRQHandler [WEAK]
EXPORT CAN_IRQHandler [WEAK]
EXPORT LIN_IRQHandler [WEAK]
EXPORT I2C_IRQHandler [WEAK]
EXPORT CPU_CLCD_IRQHandler [WEAK]
EXPORT SPI_IRQHandler [WEAK]
WDT_IRQHandler
RTC_IRQHandler
TIM0_IRQHandler
TIM2_IRQHandler
MCIA_IRQHandler
MCIB_IRQHandler
UART0_IRQHandler
UART1_IRQHandler
UART2_IRQHandler
UART3_IRQHandler
UART4_IRQHandler
AACI_IRQHandler
CLCD_IRQHandler
ENET_IRQHandler
USBDC_IRQHandler
USBHC_IRQHandler
CHLCD_IRQHandler
FLEXRAY_IRQHandler
CAN_IRQHandler
LIN_IRQHandler
I2C_IRQHandler
CPU_CLCD_IRQHandler
SPI_IRQHandler
B .
ENDP
ALIGN
; User Initial Stack & Heap
IF :DEF:__MICROLIB
EXPORT __initial_sp
EXPORT __heap_base
EXPORT __heap_limit
ELSE
IMPORT __use_two_region_memory
EXPORT __user_initial_stackheap
__user_initial_stackheap PROC
LDR R0, = Heap_Mem
LDR R1, =(Stack_Mem + Stack_Size)
LDR R2, = (Heap_Mem + Heap_Size)
LDR R3, = Stack_Mem
BX LR
ENDP
ALIGN
ENDIF
END
Drivers/CMSIS/NN/NN_Lib_Tests/nn_test/RTE/Device/ARMCM0/system_ARMCM0.c
+56
View File
@@ -0,0 +1,56 @@
/**************************************************************************//**
* @file system_ARMCM0.c
* @brief CMSIS Device System Source File for
* ARMCM0 Device Series
* @version V5.00
* @date 08. April 2016
******************************************************************************/
/*
* Copyright (c) 2009-2016 ARM Limited. All rights reserved.
*
* SPDX-License-Identifier: Apache-2.0
*
* Licensed under the Apache License, Version 2.0 (the License); you may
* not use this file except in compliance with the License.
* You may obtain a copy of the License at
*
* www.apache.org/licenses/LICENSE-2.0
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an AS IS BASIS, WITHOUT
* WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
* See the License for the specific language governing permissions and
* limitations under the License.
*/
#include "ARMCM0.h"
/*----------------------------------------------------------------------------
Define clocks
*----------------------------------------------------------------------------*/
#define XTAL ( 5000000U) /* Oscillator frequency */
#define SYSTEM_CLOCK (5 * XTAL)
/*----------------------------------------------------------------------------
System Core Clock Variable
*----------------------------------------------------------------------------*/
uint32_t SystemCoreClock = SYSTEM_CLOCK;
/*----------------------------------------------------------------------------
System Core Clock update function
*----------------------------------------------------------------------------*/
void SystemCoreClockUpdate (void)
{
SystemCoreClock = SYSTEM_CLOCK;
}
/*----------------------------------------------------------------------------
System initialization function
*----------------------------------------------------------------------------*/
void SystemInit (void)
{
SystemCoreClock = SYSTEM_CLOCK;
}
Drivers/CMSIS/NN/NN_Lib_Tests/nn_test/RTE/Device/ARMCM3/startup_ARMCM3.s
+262
View File
@@ -0,0 +1,262 @@
;/**************************************************************************//**
; * @file startup_ARMCM3.s
; * @brief CMSIS Core Device Startup File for
; * ARMCM3 Device Series
; * @version V5.00
; * @date 02. March 2016
; ******************************************************************************/
;/*
; * Copyright (c) 2009-2016 ARM Limited. All rights reserved.
; *
; * SPDX-License-Identifier: Apache-2.0
; *
; * Licensed under the Apache License, Version 2.0 (the License); you may
; * not use this file except in compliance with the License.
; * You may obtain a copy of the License at
; *
; * www.apache.org/licenses/LICENSE-2.0
; *
; * Unless required by applicable law or agreed to in writing, software
; * distributed under the License is distributed on an AS IS BASIS, WITHOUT
; * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
; * See the License for the specific language governing permissions and
; * limitations under the License.
; */
;/*
;//-------- <<< Use Configuration Wizard in Context Menu >>> ------------------
;*/
; <h> Stack Configuration
; <o> Stack Size (in Bytes) <0x0-0xFFFFFFFF:8>
; </h>
Stack_Size EQU 0x00000400
AREA STACK, NOINIT, READWRITE, ALIGN=3
Stack_Mem SPACE Stack_Size
__initial_sp
; <h> Heap Configuration
; <o> Heap Size (in Bytes) <0x0-0xFFFFFFFF:8>
; </h>
Heap_Size EQU 0x00080000
AREA HEAP, NOINIT, READWRITE, ALIGN=3
__heap_base
Heap_Mem SPACE Heap_Size
__heap_limit
PRESERVE8
THUMB
; Vector Table Mapped to Address 0 at Reset
AREA RESET, DATA, READONLY
EXPORT __Vectors
EXPORT __Vectors_End
EXPORT __Vectors_Size
__Vectors DCD __initial_sp ; Top of Stack
DCD Reset_Handler ; Reset Handler
DCD NMI_Handler ; NMI Handler
DCD HardFault_Handler ; Hard Fault Handler
DCD MemManage_Handler ; MPU Fault Handler
DCD BusFault_Handler ; Bus Fault Handler
DCD UsageFault_Handler ; Usage Fault Handler
DCD 0 ; Reserved
DCD 0 ; Reserved
DCD 0 ; Reserved
DCD 0 ; Reserved
DCD SVC_Handler ; SVCall Handler
DCD DebugMon_Handler ; Debug Monitor Handler
DCD 0 ; Reserved
DCD PendSV_Handler ; PendSV Handler
DCD SysTick_Handler ; SysTick Handler
; External Interrupts
DCD WDT_IRQHandler ; 0: Watchdog Timer
DCD RTC_IRQHandler ; 1: Real Time Clock
DCD TIM0_IRQHandler ; 2: Timer0 / Timer1
DCD TIM2_IRQHandler ; 3: Timer2 / Timer3
DCD MCIA_IRQHandler ; 4: MCIa
DCD MCIB_IRQHandler ; 5: MCIb
DCD UART0_IRQHandler ; 6: UART0 - DUT FPGA
DCD UART1_IRQHandler ; 7: UART1 - DUT FPGA
DCD UART2_IRQHandler ; 8: UART2 - DUT FPGA
DCD UART4_IRQHandler ; 9: UART4 - not connected
DCD AACI_IRQHandler ; 10: AACI / AC97
DCD CLCD_IRQHandler ; 11: CLCD Combined Interrupt
DCD ENET_IRQHandler ; 12: Ethernet
DCD USBDC_IRQHandler ; 13: USB Device
DCD USBHC_IRQHandler ; 14: USB Host Controller
DCD CHLCD_IRQHandler ; 15: Character LCD
DCD FLEXRAY_IRQHandler ; 16: Flexray
DCD CAN_IRQHandler ; 17: CAN
DCD LIN_IRQHandler ; 18: LIN
DCD I2C_IRQHandler ; 19: I2C ADC/DAC
DCD 0 ; 20: Reserved
DCD 0 ; 21: Reserved
DCD 0 ; 22: Reserved
DCD 0 ; 23: Reserved
DCD 0 ; 24: Reserved
DCD 0 ; 25: Reserved
DCD 0 ; 26: Reserved
DCD 0 ; 27: Reserved
DCD CPU_CLCD_IRQHandler ; 28: Reserved - CPU FPGA CLCD
DCD 0 ; 29: Reserved - CPU FPGA
DCD UART3_IRQHandler ; 30: UART3 - CPU FPGA
DCD SPI_IRQHandler ; 31: SPI Touchscreen - CPU FPGA
__Vectors_End
__Vectors_Size EQU __Vectors_End - __Vectors
AREA |.text|, CODE, READONLY
; Reset Handler
Reset_Handler PROC
EXPORT Reset_Handler [WEAK]
IMPORT SystemInit
IMPORT __main
LDR R0, =SystemInit
BLX R0
LDR R0, =__main
BX R0
ENDP
; Dummy Exception Handlers (infinite loops which can be modified)
NMI_Handler PROC
EXPORT NMI_Handler [WEAK]
B .
ENDP
HardFault_Handler\
PROC
EXPORT HardFault_Handler [WEAK]
B .
ENDP
MemManage_Handler\
PROC
EXPORT MemManage_Handler [WEAK]
B .
ENDP
BusFault_Handler\
PROC
EXPORT BusFault_Handler [WEAK]
B .
ENDP
UsageFault_Handler\
PROC
EXPORT UsageFault_Handler [WEAK]
B .
ENDP
SVC_Handler PROC
EXPORT SVC_Handler [WEAK]
B .
ENDP
DebugMon_Handler\
PROC
EXPORT DebugMon_Handler [WEAK]
B .
ENDP
PendSV_Handler PROC
EXPORT PendSV_Handler [WEAK]
B .
ENDP
SysTick_Handler PROC
EXPORT SysTick_Handler [WEAK]
B .
ENDP
Default_Handler PROC
EXPORT WDT_IRQHandler [WEAK]
EXPORT RTC_IRQHandler [WEAK]
EXPORT TIM0_IRQHandler [WEAK]
EXPORT TIM2_IRQHandler [WEAK]
EXPORT MCIA_IRQHandler [WEAK]
EXPORT MCIB_IRQHandler [WEAK]
EXPORT UART0_IRQHandler [WEAK]
EXPORT UART1_IRQHandler [WEAK]
EXPORT UART2_IRQHandler [WEAK]
EXPORT UART3_IRQHandler [WEAK]
EXPORT UART4_IRQHandler [WEAK]
EXPORT AACI_IRQHandler [WEAK]
EXPORT CLCD_IRQHandler [WEAK]
EXPORT ENET_IRQHandler [WEAK]
EXPORT USBDC_IRQHandler [WEAK]
EXPORT USBHC_IRQHandler [WEAK]
EXPORT CHLCD_IRQHandler [WEAK]
EXPORT FLEXRAY_IRQHandler [WEAK]
EXPORT CAN_IRQHandler [WEAK]
EXPORT LIN_IRQHandler [WEAK]
EXPORT I2C_IRQHandler [WEAK]
EXPORT CPU_CLCD_IRQHandler [WEAK]
EXPORT SPI_IRQHandler [WEAK]
WDT_IRQHandler
RTC_IRQHandler
TIM0_IRQHandler
TIM2_IRQHandler
MCIA_IRQHandler
MCIB_IRQHandler
UART0_IRQHandler
UART1_IRQHandler
UART2_IRQHandler
UART3_IRQHandler
UART4_IRQHandler
AACI_IRQHandler
CLCD_IRQHandler
ENET_IRQHandler
USBDC_IRQHandler
USBHC_IRQHandler
CHLCD_IRQHandler
FLEXRAY_IRQHandler
CAN_IRQHandler
LIN_IRQHandler
I2C_IRQHandler
CPU_CLCD_IRQHandler
SPI_IRQHandler
B .
ENDP
ALIGN
; User Initial Stack & Heap
IF :DEF:__MICROLIB
EXPORT __initial_sp
EXPORT __heap_base
EXPORT __heap_limit
ELSE
IMPORT __use_two_region_memory
EXPORT __user_initial_stackheap
__user_initial_stackheap PROC
LDR R0, = Heap_Mem
LDR R1, =(Stack_Mem + Stack_Size)
LDR R2, = (Heap_Mem + Heap_Size)
LDR R3, = Stack_Mem
BX LR
ENDP
ALIGN
ENDIF
END
Drivers/CMSIS/NN/NN_Lib_Tests/nn_test/RTE/Device/ARMCM3/system_ARMCM3.c
+68
View File
@@ -0,0 +1,68 @@
/**************************************************************************//**
* @file system_ARMCM3.c
* @brief CMSIS Device System Source File for
* ARMCM3 Device Series
* @version V5.00
* @date 08. April 2016
******************************************************************************/
/*
* Copyright (c) 2009-2016 ARM Limited. All rights reserved.
*
* SPDX-License-Identifier: Apache-2.0
*
* Licensed under the Apache License, Version 2.0 (the License); you may
* not use this file except in compliance with the License.
* You may obtain a copy of the License at
*
* www.apache.org/licenses/LICENSE-2.0
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an AS IS BASIS, WITHOUT
* WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
* See the License for the specific language governing permissions and
* limitations under the License.
*/
#include "ARMCM3.h"
/*----------------------------------------------------------------------------
Define clocks
*----------------------------------------------------------------------------*/
#define XTAL ( 5000000U) /* Oscillator frequency */
#define SYSTEM_CLOCK (5 * XTAL)
/*----------------------------------------------------------------------------
Externals
*----------------------------------------------------------------------------*/
#if defined (__VTOR_PRESENT) && (__VTOR_PRESENT == 1)
extern uint32_t __Vectors;
#endif
/*----------------------------------------------------------------------------
System Core Clock Variable
*----------------------------------------------------------------------------*/
uint32_t SystemCoreClock = SYSTEM_CLOCK;
/*----------------------------------------------------------------------------
System Core Clock update function
*----------------------------------------------------------------------------*/
void SystemCoreClockUpdate (void)
{
SystemCoreClock = SYSTEM_CLOCK;
}
/*----------------------------------------------------------------------------
System initialization function
*----------------------------------------------------------------------------*/
void SystemInit (void)
{
#if defined (__VTOR_PRESENT) && (__VTOR_PRESENT == 1)
SCB->VTOR = (uint32_t) &__Vectors;
#endif
SystemCoreClock = SYSTEM_CLOCK;
}
Drivers/CMSIS/NN/NN_Lib_Tests/nn_test/RTE/Device/ARMCM4/startup_ARMCM4.s
+262
View File
@@ -0,0 +1,262 @@
;/**************************************************************************//**
; * @file startup_ARMCM4.s
; * @brief CMSIS Core Device Startup File for
; * ARMCM4 Device Series
; * @version V5.00
; * @date 02. March 2016
; ******************************************************************************/
;/*
; * Copyright (c) 2009-2016 ARM Limited. All rights reserved.
; *
; * SPDX-License-Identifier: Apache-2.0
; *
; * Licensed under the Apache License, Version 2.0 (the License); you may
; * not use this file except in compliance with the License.
; * You may obtain a copy of the License at
; *
; * www.apache.org/licenses/LICENSE-2.0
; *
; * Unless required by applicable law or agreed to in writing, software
; * distributed under the License is distributed on an AS IS BASIS, WITHOUT
; * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
; * See the License for the specific language governing permissions and
; * limitations under the License.
; */
;/*
;//-------- <<< Use Configuration Wizard in Context Menu >>> ------------------
;*/
; <h> Stack Configuration
; <o> Stack Size (in Bytes) <0x0-0xFFFFFFFF:8>
; </h>
Stack_Size EQU 0x00000400
AREA STACK, NOINIT, READWRITE, ALIGN=3
Stack_Mem SPACE Stack_Size
__initial_sp
; <h> Heap Configuration
; <o> Heap Size (in Bytes) <0x0-0xFFFFFFFF:8>
; </h>
Heap_Size EQU 0x00000C00
AREA HEAP, NOINIT, READWRITE, ALIGN=3
__heap_base
Heap_Mem SPACE Heap_Size
__heap_limit
PRESERVE8
THUMB
; Vector Table Mapped to Address 0 at Reset
AREA RESET, DATA, READONLY
EXPORT __Vectors
EXPORT __Vectors_End
EXPORT __Vectors_Size
__Vectors DCD __initial_sp ; Top of Stack
DCD Reset_Handler ; Reset Handler
DCD NMI_Handler ; NMI Handler
DCD HardFault_Handler ; Hard Fault Handler
DCD MemManage_Handler ; MPU Fault Handler
DCD BusFault_Handler ; Bus Fault Handler
DCD UsageFault_Handler ; Usage Fault Handler
DCD 0 ; Reserved
DCD 0 ; Reserved
DCD 0 ; Reserved
DCD 0 ; Reserved
DCD SVC_Handler ; SVCall Handler
DCD DebugMon_Handler ; Debug Monitor Handler
DCD 0 ; Reserved
DCD PendSV_Handler ; PendSV Handler
DCD SysTick_Handler ; SysTick Handler
; External Interrupts
DCD WDT_IRQHandler ; 0: Watchdog Timer
DCD RTC_IRQHandler ; 1: Real Time Clock
DCD TIM0_IRQHandler ; 2: Timer0 / Timer1
DCD TIM2_IRQHandler ; 3: Timer2 / Timer3
DCD MCIA_IRQHandler ; 4: MCIa
DCD MCIB_IRQHandler ; 5: MCIb
DCD UART0_IRQHandler ; 6: UART0 - DUT FPGA
DCD UART1_IRQHandler ; 7: UART1 - DUT FPGA
DCD UART2_IRQHandler ; 8: UART2 - DUT FPGA
DCD UART4_IRQHandler ; 9: UART4 - not connected
DCD AACI_IRQHandler ; 10: AACI / AC97
DCD CLCD_IRQHandler ; 11: CLCD Combined Interrupt
DCD ENET_IRQHandler ; 12: Ethernet
DCD USBDC_IRQHandler ; 13: USB Device
DCD USBHC_IRQHandler ; 14: USB Host Controller
DCD CHLCD_IRQHandler ; 15: Character LCD
DCD FLEXRAY_IRQHandler ; 16: Flexray
DCD CAN_IRQHandler ; 17: CAN
DCD LIN_IRQHandler ; 18: LIN
DCD I2C_IRQHandler ; 19: I2C ADC/DAC
DCD 0 ; 20: Reserved
DCD 0 ; 21: Reserved
DCD 0 ; 22: Reserved
DCD 0 ; 23: Reserved
DCD 0 ; 24: Reserved
DCD 0 ; 25: Reserved
DCD 0 ; 26: Reserved
DCD 0 ; 27: Reserved
DCD CPU_CLCD_IRQHandler ; 28: Reserved - CPU FPGA CLCD
DCD 0 ; 29: Reserved - CPU FPGA
DCD UART3_IRQHandler ; 30: UART3 - CPU FPGA
DCD SPI_IRQHandler ; 31: SPI Touchscreen - CPU FPGA
__Vectors_End
__Vectors_Size EQU __Vectors_End - __Vectors
AREA |.text|, CODE, READONLY
; Reset Handler
Reset_Handler PROC
EXPORT Reset_Handler [WEAK]
IMPORT SystemInit
IMPORT __main
LDR R0, =SystemInit
BLX R0
LDR R0, =__main
BX R0
ENDP
; Dummy Exception Handlers (infinite loops which can be modified)
NMI_Handler PROC
EXPORT NMI_Handler [WEAK]
B .
ENDP
HardFault_Handler\
PROC
EXPORT HardFault_Handler [WEAK]
B .
ENDP
MemManage_Handler\
PROC
EXPORT MemManage_Handler [WEAK]
B .
ENDP
BusFault_Handler\
PROC
EXPORT BusFault_Handler [WEAK]
B .
ENDP
UsageFault_Handler\
PROC
EXPORT UsageFault_Handler [WEAK]
B .
ENDP
SVC_Handler PROC
EXPORT SVC_Handler [WEAK]
B .
ENDP
DebugMon_Handler\
PROC
EXPORT DebugMon_Handler [WEAK]
B .
ENDP
PendSV_Handler PROC
EXPORT PendSV_Handler [WEAK]
B .
ENDP
SysTick_Handler PROC
EXPORT SysTick_Handler [WEAK]
B .
ENDP
Default_Handler PROC
EXPORT WDT_IRQHandler [WEAK]
EXPORT RTC_IRQHandler [WEAK]
EXPORT TIM0_IRQHandler [WEAK]
EXPORT TIM2_IRQHandler [WEAK]
EXPORT MCIA_IRQHandler [WEAK]
EXPORT MCIB_IRQHandler [WEAK]
EXPORT UART0_IRQHandler [WEAK]
EXPORT UART1_IRQHandler [WEAK]
EXPORT UART2_IRQHandler [WEAK]
EXPORT UART3_IRQHandler [WEAK]
EXPORT UART4_IRQHandler [WEAK]
EXPORT AACI_IRQHandler [WEAK]
EXPORT CLCD_IRQHandler [WEAK]
EXPORT ENET_IRQHandler [WEAK]
EXPORT USBDC_IRQHandler [WEAK]
EXPORT USBHC_IRQHandler [WEAK]
EXPORT CHLCD_IRQHandler [WEAK]
EXPORT FLEXRAY_IRQHandler [WEAK]
EXPORT CAN_IRQHandler [WEAK]
EXPORT LIN_IRQHandler [WEAK]
EXPORT I2C_IRQHandler [WEAK]
EXPORT CPU_CLCD_IRQHandler [WEAK]
EXPORT SPI_IRQHandler [WEAK]
WDT_IRQHandler
RTC_IRQHandler
TIM0_IRQHandler
TIM2_IRQHandler
MCIA_IRQHandler
MCIB_IRQHandler
UART0_IRQHandler
UART1_IRQHandler
UART2_IRQHandler
UART3_IRQHandler
UART4_IRQHandler
AACI_IRQHandler
CLCD_IRQHandler
ENET_IRQHandler
USBDC_IRQHandler
USBHC_IRQHandler
CHLCD_IRQHandler
FLEXRAY_IRQHandler
CAN_IRQHandler
LIN_IRQHandler
I2C_IRQHandler
CPU_CLCD_IRQHandler
SPI_IRQHandler
B .
ENDP
ALIGN
; User Initial Stack & Heap
IF :DEF:__MICROLIB
EXPORT __initial_sp
EXPORT __heap_base
EXPORT __heap_limit
ELSE
IMPORT __use_two_region_memory
EXPORT __user_initial_stackheap
__user_initial_stackheap PROC
LDR R0, = Heap_Mem
LDR R1, =(Stack_Mem + Stack_Size)
LDR R2, = (Heap_Mem + Heap_Size)
LDR R3, = Stack_Mem
BX LR
ENDP
ALIGN
ENDIF
END
Drivers/CMSIS/NN/NN_Lib_Tests/nn_test/RTE/Device/ARMCM4/system_ARMCM4.c
+83
View File
@@ -0,0 +1,83 @@
/**************************************************************************//**
* @file system_ARMCM4.c
* @brief CMSIS Device System Source File for
* ARMCM4 Device Series
* @version V5.00
* @date 07. September 2016
******************************************************************************/
/*
* Copyright (c) 2009-2016 ARM Limited. All rights reserved.
*
* SPDX-License-Identifier: Apache-2.0
*
* Licensed under the Apache License, Version 2.0 (the License); you may
* not use this file except in compliance with the License.
* You may obtain a copy of the License at
*
* www.apache.org/licenses/LICENSE-2.0
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an AS IS BASIS, WITHOUT
* WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
* See the License for the specific language governing permissions and
* limitations under the License.
*/
#if defined (ARMCM4)
#include "ARMCM4.h"
#elif defined (ARMCM4_FP)
#include "ARMCM4_FP.h"
#else
#error device not specified!
#endif
/*----------------------------------------------------------------------------
Define clocks
*----------------------------------------------------------------------------*/
#define XTAL ( 5000000UL) /* Oscillator frequency */
#define SYSTEM_CLOCK (5U * XTAL)
/*----------------------------------------------------------------------------
Externals
*----------------------------------------------------------------------------*/
#if defined (__VTOR_PRESENT) && (__VTOR_PRESENT == 1U)
extern uint32_t __Vectors;
#endif
/*----------------------------------------------------------------------------
System Core Clock Variable
*----------------------------------------------------------------------------*/
uint32_t SystemCoreClock = SYSTEM_CLOCK;
/*----------------------------------------------------------------------------
System Core Clock update function
*----------------------------------------------------------------------------*/
void SystemCoreClockUpdate (void)
{
SystemCoreClock = SYSTEM_CLOCK;
}
/*----------------------------------------------------------------------------
System initialization function
*----------------------------------------------------------------------------*/
void SystemInit (void)
{
#if defined (__VTOR_PRESENT) && (__VTOR_PRESENT == 1U)
SCB->VTOR = (uint32_t) &__Vectors;
#endif
#if defined (__FPU_USED) && (__FPU_USED == 1U)
SCB->CPACR |= ((3U << 10U*2U) | /* set CP10 Full Access */
(3U << 11U*2U) ); /* set CP11 Full Access */
#endif
#ifdef UNALIGNED_SUPPORT_DISABLE
SCB->CCR |= SCB_CCR_UNALIGN_TRP_Msk;
#endif
SystemCoreClock = SYSTEM_CLOCK;
}
Drivers/CMSIS/NN/NN_Lib_Tests/nn_test/RTE/Device/ARMCM4_FP/startup_ARMCM4.s
+262
View File
@@ -0,0 +1,262 @@
;/**************************************************************************//**
; * @file startup_ARMCM4.s
; * @brief CMSIS Core Device Startup File for
; * ARMCM4 Device Series
; * @version V5.00
; * @date 02. March 2016
; ******************************************************************************/
;/*
; * Copyright (c) 2009-2016 ARM Limited. All rights reserved.
; *
; * SPDX-License-Identifier: Apache-2.0
; *
; * Licensed under the Apache License, Version 2.0 (the License); you may
; * not use this file except in compliance with the License.
; * You may obtain a copy of the License at
; *
; * www.apache.org/licenses/LICENSE-2.0
; *
; * Unless required by applicable law or agreed to in writing, software
; * distributed under the License is distributed on an AS IS BASIS, WITHOUT
; * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
; * See the License for the specific language governing permissions and
; * limitations under the License.
; */
;/*
;//-------- <<< Use Configuration Wizard in Context Menu >>> ------------------
;*/
; <h> Stack Configuration
; <o> Stack Size (in Bytes) <0x0-0xFFFFFFFF:8>
; </h>
Stack_Size EQU 0x00004000
AREA STACK, NOINIT, READWRITE, ALIGN=3
Stack_Mem SPACE Stack_Size
__initial_sp
; <h> Heap Configuration
; <o> Heap Size (in Bytes) <0x0-0xFFFFFFFF:8>
; </h>
Heap_Size EQU 0x00100000
AREA HEAP, NOINIT, READWRITE, ALIGN=3
__heap_base
Heap_Mem SPACE Heap_Size
__heap_limit
PRESERVE8
THUMB
; Vector Table Mapped to Address 0 at Reset
AREA RESET, DATA, READONLY
EXPORT __Vectors
EXPORT __Vectors_End
EXPORT __Vectors_Size
__Vectors DCD __initial_sp ; Top of Stack
DCD Reset_Handler ; Reset Handler
DCD NMI_Handler ; NMI Handler
DCD HardFault_Handler ; Hard Fault Handler
DCD MemManage_Handler ; MPU Fault Handler
DCD BusFault_Handler ; Bus Fault Handler
DCD UsageFault_Handler ; Usage Fault Handler
DCD 0 ; Reserved
DCD 0 ; Reserved
DCD 0 ; Reserved
DCD 0 ; Reserved
DCD SVC_Handler ; SVCall Handler
DCD DebugMon_Handler ; Debug Monitor Handler
DCD 0 ; Reserved
DCD PendSV_Handler ; PendSV Handler
DCD SysTick_Handler ; SysTick Handler
; External Interrupts
DCD WDT_IRQHandler ; 0: Watchdog Timer
DCD RTC_IRQHandler ; 1: Real Time Clock
DCD TIM0_IRQHandler ; 2: Timer0 / Timer1
DCD TIM2_IRQHandler ; 3: Timer2 / Timer3
DCD MCIA_IRQHandler ; 4: MCIa
DCD MCIB_IRQHandler ; 5: MCIb
DCD UART0_IRQHandler ; 6: UART0 - DUT FPGA
DCD UART1_IRQHandler ; 7: UART1 - DUT FPGA
DCD UART2_IRQHandler ; 8: UART2 - DUT FPGA
DCD UART4_IRQHandler ; 9: UART4 - not connected
DCD AACI_IRQHandler ; 10: AACI / AC97
DCD CLCD_IRQHandler ; 11: CLCD Combined Interrupt
DCD ENET_IRQHandler ; 12: Ethernet
DCD USBDC_IRQHandler ; 13: USB Device
DCD USBHC_IRQHandler ; 14: USB Host Controller
DCD CHLCD_IRQHandler ; 15: Character LCD
DCD FLEXRAY_IRQHandler ; 16: Flexray
DCD CAN_IRQHandler ; 17: CAN
DCD LIN_IRQHandler ; 18: LIN
DCD I2C_IRQHandler ; 19: I2C ADC/DAC
DCD 0 ; 20: Reserved
DCD 0 ; 21: Reserved
DCD 0 ; 22: Reserved
DCD 0 ; 23: Reserved
DCD 0 ; 24: Reserved
DCD 0 ; 25: Reserved
DCD 0 ; 26: Reserved
DCD 0 ; 27: Reserved
DCD CPU_CLCD_IRQHandler ; 28: Reserved - CPU FPGA CLCD
DCD 0 ; 29: Reserved - CPU FPGA
DCD UART3_IRQHandler ; 30: UART3 - CPU FPGA
DCD SPI_IRQHandler ; 31: SPI Touchscreen - CPU FPGA
__Vectors_End
__Vectors_Size EQU __Vectors_End - __Vectors
AREA |.text|, CODE, READONLY
; Reset Handler
Reset_Handler PROC
EXPORT Reset_Handler [WEAK]
IMPORT SystemInit
IMPORT __main
LDR R0, =SystemInit
BLX R0
LDR R0, =__main
BX R0
ENDP
; Dummy Exception Handlers (infinite loops which can be modified)
NMI_Handler PROC
EXPORT NMI_Handler [WEAK]
B .
ENDP
HardFault_Handler\
PROC
EXPORT HardFault_Handler [WEAK]
B .
ENDP
MemManage_Handler\
PROC
EXPORT MemManage_Handler [WEAK]
B .
ENDP
BusFault_Handler\
PROC
EXPORT BusFault_Handler [WEAK]
B .
ENDP
UsageFault_Handler\
PROC
EXPORT UsageFault_Handler [WEAK]
B .
ENDP
SVC_Handler PROC
EXPORT SVC_Handler [WEAK]
B .
ENDP
DebugMon_Handler\
PROC
EXPORT DebugMon_Handler [WEAK]
B .
ENDP
PendSV_Handler PROC
EXPORT PendSV_Handler [WEAK]
B .
ENDP
SysTick_Handler PROC
EXPORT SysTick_Handler [WEAK]
B .
ENDP
Default_Handler PROC
EXPORT WDT_IRQHandler [WEAK]
EXPORT RTC_IRQHandler [WEAK]
EXPORT TIM0_IRQHandler [WEAK]
EXPORT TIM2_IRQHandler [WEAK]
EXPORT MCIA_IRQHandler [WEAK]
EXPORT MCIB_IRQHandler [WEAK]
EXPORT UART0_IRQHandler [WEAK]
EXPORT UART1_IRQHandler [WEAK]
EXPORT UART2_IRQHandler [WEAK]
EXPORT UART3_IRQHandler [WEAK]
EXPORT UART4_IRQHandler [WEAK]
EXPORT AACI_IRQHandler [WEAK]
EXPORT CLCD_IRQHandler [WEAK]
EXPORT ENET_IRQHandler [WEAK]
EXPORT USBDC_IRQHandler [WEAK]
EXPORT USBHC_IRQHandler [WEAK]
EXPORT CHLCD_IRQHandler [WEAK]
EXPORT FLEXRAY_IRQHandler [WEAK]
EXPORT CAN_IRQHandler [WEAK]
EXPORT LIN_IRQHandler [WEAK]
EXPORT I2C_IRQHandler [WEAK]
EXPORT CPU_CLCD_IRQHandler [WEAK]
EXPORT SPI_IRQHandler [WEAK]
WDT_IRQHandler
RTC_IRQHandler
TIM0_IRQHandler
TIM2_IRQHandler
MCIA_IRQHandler
MCIB_IRQHandler
UART0_IRQHandler
UART1_IRQHandler
UART2_IRQHandler
UART3_IRQHandler
UART4_IRQHandler
AACI_IRQHandler
CLCD_IRQHandler
ENET_IRQHandler
USBDC_IRQHandler
USBHC_IRQHandler
CHLCD_IRQHandler
FLEXRAY_IRQHandler
CAN_IRQHandler
LIN_IRQHandler
I2C_IRQHandler
CPU_CLCD_IRQHandler
SPI_IRQHandler
B .
ENDP
ALIGN
; User Initial Stack & Heap
IF :DEF:__MICROLIB
EXPORT __initial_sp
EXPORT __heap_base
EXPORT __heap_limit
ELSE
IMPORT __use_two_region_memory
EXPORT __user_initial_stackheap
__user_initial_stackheap PROC
LDR R0, = Heap_Mem
LDR R1, =(Stack_Mem + Stack_Size)
LDR R2, = (Heap_Mem + Heap_Size)
LDR R3, = Stack_Mem
BX LR
ENDP
ALIGN
ENDIF
END
Drivers/CMSIS/NN/NN_Lib_Tests/nn_test/RTE/Device/ARMCM4_FP/system_ARMCM4.c
+83
View File
@@ -0,0 +1,83 @@
/**************************************************************************//**
* @file system_ARMCM4.c
* @brief CMSIS Device System Source File for
* ARMCM4 Device Series
* @version V5.00
* @date 08. April 2016
******************************************************************************/
/*
* Copyright (c) 2009-2016 ARM Limited. All rights reserved.
*
* SPDX-License-Identifier: Apache-2.0
*
* Licensed under the Apache License, Version 2.0 (the License); you may
* not use this file except in compliance with the License.
* You may obtain a copy of the License at
*
* www.apache.org/licenses/LICENSE-2.0
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an AS IS BASIS, WITHOUT
* WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
* See the License for the specific language governing permissions and
* limitations under the License.
*/
#if defined (ARMCM4)
#include "ARMCM4.h"
#elif defined (ARMCM4_FP)
#include "ARMCM4_FP.h"
#else
#error device not specified!
#endif
/*----------------------------------------------------------------------------
Define clocks
*----------------------------------------------------------------------------*/
#define XTAL ( 5000000U) /* Oscillator frequency */
#define SYSTEM_CLOCK (5 * XTAL)
/*----------------------------------------------------------------------------
Externals
*----------------------------------------------------------------------------*/
#if defined (__VTOR_PRESENT) && (__VTOR_PRESENT == 1)
extern uint32_t __Vectors;
#endif
/*----------------------------------------------------------------------------
System Core Clock Variable
*----------------------------------------------------------------------------*/
uint32_t SystemCoreClock = SYSTEM_CLOCK;
/*----------------------------------------------------------------------------
System Core Clock update function
*----------------------------------------------------------------------------*/
void SystemCoreClockUpdate (void)
{
SystemCoreClock = SYSTEM_CLOCK;
}
/*----------------------------------------------------------------------------
System initialization function
*----------------------------------------------------------------------------*/
void SystemInit (void)
{
#if defined (__VTOR_PRESENT) && (__VTOR_PRESENT == 1)
SCB->VTOR = (uint32_t) &__Vectors;
#endif
#if defined (__FPU_USED) && (__FPU_USED == 1)
SCB->CPACR |= ((3U << 10*2) | /* set CP10 Full Access */
(3U << 11*2) ); /* set CP11 Full Access */
#endif
#ifdef UNALIGNED_SUPPORT_DISABLE
SCB->CCR |= SCB_CCR_UNALIGN_TRP_Msk;
#endif
SystemCoreClock = SYSTEM_CLOCK;
}
Drivers/CMSIS/NN/NN_Lib_Tests/nn_test/RTE/Device/ARMCM7_SP/startup_ARMCM7.c
+295
View File
@@ -0,0 +1,295 @@
/**************************************************************************//**
* @file startup_ARMCM7.s
* @brief CMSIS Core Device Startup File for
* ARMCM7 Device Series
* @version V5.00
* @date 26. April 2016
******************************************************************************/
/*
* Copyright (c) 2009-2016 ARM Limited. All rights reserved.
*
* SPDX-License-Identifier: Apache-2.0
*
* Licensed under the Apache License, Version 2.0 (the License); you may
* not use this file except in compliance with the License.
* You may obtain a copy of the License at
*
* www.apache.org/licenses/LICENSE-2.0
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an AS IS BASIS, WITHOUT
* WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
* See the License for the specific language governing permissions and
* limitations under the License.
*/
#include <stdint.h>
/*----------------------------------------------------------------------------
Linker generated Symbols
*----------------------------------------------------------------------------*/
extern uint32_t __etext;
extern uint32_t __data_start__;
extern uint32_t __data_end__;
extern uint32_t __copy_table_start__;
extern uint32_t __copy_table_end__;
extern uint32_t __zero_table_start__;
extern uint32_t __zero_table_end__;
extern uint32_t __bss_start__;
extern uint32_t __bss_end__;
extern uint32_t __StackTop;
/*----------------------------------------------------------------------------
Exception / Interrupt Handler Function Prototype
*----------------------------------------------------------------------------*/
typedef void( *pFunc )( void );
/*----------------------------------------------------------------------------
External References
*----------------------------------------------------------------------------*/
#ifndef __START
extern void _start(void) __attribute__((noreturn)); /* PreeMain (C library entry point) */
#else
extern int __START(void) __attribute__((noreturn)); /* main entry point */
#endif
#ifndef __NO_SYSTEM_INIT
extern void SystemInit (void); /* CMSIS System Initialization */
#endif
/*----------------------------------------------------------------------------
Internal References
*----------------------------------------------------------------------------*/
void Default_Handler(void); /* Default empty handler */
void Reset_Handler(void); /* Reset Handler */
/*----------------------------------------------------------------------------
User Initial Stack & Heap
*----------------------------------------------------------------------------*/
#ifndef __STACK_SIZE
#define __STACK_SIZE 0x00000400
#endif
static uint8_t stack[__STACK_SIZE] __attribute__ ((aligned(8), used, section(".stack")));
#ifndef __HEAP_SIZE
#define __HEAP_SIZE 0x00000C00
#endif
#if __HEAP_SIZE > 0
static uint8_t heap[__HEAP_SIZE] __attribute__ ((aligned(8), used, section(".heap")));
#endif
/*----------------------------------------------------------------------------
Exception / Interrupt Handler
*----------------------------------------------------------------------------*/
/* Cortex-M7 Processor Exceptions */
void NMI_Handler (void) __attribute__ ((weak, alias("Default_Handler")));
void HardFault_Handler (void) __attribute__ ((weak, alias("Default_Handler")));
void MemManage_Handler (void) __attribute__ ((weak, alias("Default_Handler")));
void BusFault_Handler (void) __attribute__ ((weak, alias("Default_Handler")));
void UsageFault_Handler (void) __attribute__ ((weak, alias("Default_Handler")));
void SVC_Handler (void) __attribute__ ((weak, alias("Default_Handler")));
void DebugMon_Handler (void) __attribute__ ((weak, alias("Default_Handler")));
void PendSV_Handler (void) __attribute__ ((weak, alias("Default_Handler")));
void SysTick_Handler (void) __attribute__ ((weak, alias("Default_Handler")));
/* ARMCM7 Specific Interrupts */
void WDT_IRQHandler (void) __attribute__ ((weak, alias("Default_Handler")));
void RTC_IRQHandler (void) __attribute__ ((weak, alias("Default_Handler")));
void TIM0_IRQHandler (void) __attribute__ ((weak, alias("Default_Handler")));
void TIM2_IRQHandler (void) __attribute__ ((weak, alias("Default_Handler")));
void MCIA_IRQHandler (void) __attribute__ ((weak, alias("Default_Handler")));
void MCIB_IRQHandler (void) __attribute__ ((weak, alias("Default_Handler")));
void UART0_IRQHandler (void) __attribute__ ((weak, alias("Default_Handler")));
void UART1_IRQHandler (void) __attribute__ ((weak, alias("Default_Handler")));
void UART2_IRQHandler (void) __attribute__ ((weak, alias("Default_Handler")));
void UART4_IRQHandler (void) __attribute__ ((weak, alias("Default_Handler")));
void AACI_IRQHandler (void) __attribute__ ((weak, alias("Default_Handler")));
void CLCD_IRQHandler (void) __attribute__ ((weak, alias("Default_Handler")));
void ENET_IRQHandler (void) __attribute__ ((weak, alias("Default_Handler")));
void USBDC_IRQHandler (void) __attribute__ ((weak, alias("Default_Handler")));
void USBHC_IRQHandler (void) __attribute__ ((weak, alias("Default_Handler")));
void CHLCD_IRQHandler (void) __attribute__ ((weak, alias("Default_Handler")));
void FLEXRAY_IRQHandler (void) __attribute__ ((weak, alias("Default_Handler")));
void CAN_IRQHandler (void) __attribute__ ((weak, alias("Default_Handler")));
void LIN_IRQHandler (void) __attribute__ ((weak, alias("Default_Handler")));
void I2C_IRQHandler (void) __attribute__ ((weak, alias("Default_Handler")));
void CPU_CLCD_IRQHandler (void) __attribute__ ((weak, alias("Default_Handler")));
void UART3_IRQHandler (void) __attribute__ ((weak, alias("Default_Handler")));
void SPI_IRQHandler (void) __attribute__ ((weak, alias("Default_Handler")));
/*----------------------------------------------------------------------------
Exception / Interrupt Vector table
*----------------------------------------------------------------------------*/
const pFunc __Vectors[] __attribute__ ((section(".vectors"))) = {
/* Cortex-M7 Exceptions Handler */
(pFunc)((uint32_t)&__StackTop), /* Initial Stack Pointer */
Reset_Handler, /* Reset Handler */
NMI_Handler, /* NMI Handler */
HardFault_Handler, /* Hard Fault Handler */
MemManage_Handler, /* MPU Fault Handler */
BusFault_Handler, /* Bus Fault Handler */
UsageFault_Handler, /* Usage Fault Handler */
0, /* Reserved */
0, /* Reserved */
0, /* Reserved */
0, /* Reserved */
SVC_Handler, /* SVCall Handler */
DebugMon_Handler, /* Debug Monitor Handler */
0, /* Reserved */
PendSV_Handler, /* PendSV Handler */
SysTick_Handler, /* SysTick Handler */
/* External interrupts */
WDT_IRQHandler, /* 0: Watchdog Timer */
RTC_IRQHandler, /* 1: Real Time Clock */
TIM0_IRQHandler, /* 2: Timer0 / Timer1 */
TIM2_IRQHandler, /* 3: Timer2 / Timer3 */
MCIA_IRQHandler, /* 4: MCIa */
MCIB_IRQHandler, /* 5: MCIb */
UART0_IRQHandler, /* 6: UART0 - DUT FPGA */
UART1_IRQHandler, /* 7: UART1 - DUT FPGA */
UART2_IRQHandler, /* 8: UART2 - DUT FPGA */
UART4_IRQHandler, /* 9: UART4 - not connected */
AACI_IRQHandler, /* 10: AACI / AC97 */
CLCD_IRQHandler, /* 11: CLCD Combined Interrupt */
ENET_IRQHandler, /* 12: Ethernet */
USBDC_IRQHandler, /* 13: USB Device */
USBHC_IRQHandler, /* 14: USB Host Controller */
CHLCD_IRQHandler, /* 15: Character LCD */
FLEXRAY_IRQHandler, /* 16: Flexray */
CAN_IRQHandler, /* 17: CAN */
LIN_IRQHandler, /* 18: LIN */
I2C_IRQHandler, /* 19: I2C ADC/DAC */
0, /* 20: Reserved */
0, /* 21: Reserved */
0, /* 22: Reserved */
0, /* 23: Reserved */
0, /* 24: Reserved */
0, /* 25: Reserved */
0, /* 26: Reserved */
0, /* 27: Reserved */
CPU_CLCD_IRQHandler, /* 28: Reserved - CPU FPGA CLCD */
0, /* 29: Reserved - CPU FPGA */
UART3_IRQHandler, /* 30: UART3 - CPU FPGA */
SPI_IRQHandler /* 31: SPI Touchscreen - CPU FPGA */
};
/*----------------------------------------------------------------------------
Reset Handler called on controller reset
*----------------------------------------------------------------------------*/
void Reset_Handler(void) {
uint32_t *pSrc, *pDest;
uint32_t *pTable __attribute__((unused));
/* Firstly it copies data from read only memory to RAM. There are two schemes
* to copy. One can copy more than one sections. Another can only copy
* one section. The former scheme needs more instructions and read-only
* data to implement than the latter.
* Macro __STARTUP_COPY_MULTIPLE is used to choose between two schemes. */
#ifdef __STARTUP_COPY_MULTIPLE
/* Multiple sections scheme.
*
* Between symbol address __copy_table_start__ and __copy_table_end__,
* there are array of triplets, each of which specify:
* offset 0: LMA of start of a section to copy from
* offset 4: VMA of start of a section to copy to
* offset 8: size of the section to copy. Must be multiply of 4
*
* All addresses must be aligned to 4 bytes boundary.
*/
pTable = &__copy_table_start__;
for (; pTable < &__copy_table_end__; pTable = pTable + 3) {
pSrc = (uint32_t*)*(pTable + 0);
pDest = (uint32_t*)*(pTable + 1);
for (; pDest < (uint32_t*)(*(pTable + 1) + *(pTable + 2)) ; ) {
*pDest++ = *pSrc++;
}
}
#else
/* Single section scheme.
*
* The ranges of copy from/to are specified by following symbols
* __etext: LMA of start of the section to copy from. Usually end of text
* __data_start__: VMA of start of the section to copy to
* __data_end__: VMA of end of the section to copy to
*
* All addresses must be aligned to 4 bytes boundary.
*/
pSrc = &__etext;
pDest = &__data_start__;
for ( ; pDest < &__data_end__ ; ) {
*pDest++ = *pSrc++;
}
#endif /*__STARTUP_COPY_MULTIPLE */
/* This part of work usually is done in C library startup code. Otherwise,
* define this macro to enable it in this startup.
*
* There are two schemes too. One can clear multiple BSS sections. Another
* can only clear one section. The former is more size expensive than the
* latter.
*
* Define macro __STARTUP_CLEAR_BSS_MULTIPLE to choose the former.
* Otherwise efine macro __STARTUP_CLEAR_BSS to choose the later.
*/
#ifdef __STARTUP_CLEAR_BSS_MULTIPLE
/* Multiple sections scheme.
*
* Between symbol address __copy_table_start__ and __copy_table_end__,
* there are array of tuples specifying:
* offset 0: Start of a BSS section
* offset 4: Size of this BSS section. Must be multiply of 4
*/
pTable = &__zero_table_start__;
for (; pTable < &__zero_table_end__; pTable = pTable + 2) {
pDest = (uint32_t*)*(pTable + 0);
for (; pDest < (uint32_t*)(*(pTable + 0) + *(pTable + 1)) ; ) {
*pDest++ = 0;
}
}
#elif defined (__STARTUP_CLEAR_BSS)
/* Single BSS section scheme.
*
* The BSS section is specified by following symbols
* __bss_start__: start of the BSS section.
* __bss_end__: end of the BSS section.
*
* Both addresses must be aligned to 4 bytes boundary.
*/
pDest = &__bss_start__;
for ( ; pDest < &__bss_end__ ; ) {
*pDest++ = 0UL;
}
#endif /* __STARTUP_CLEAR_BSS_MULTIPLE || __STARTUP_CLEAR_BSS */
#ifndef __NO_SYSTEM_INIT
SystemInit();
#endif
#ifndef __START
#define __START _start
#endif
__START();
}
/*----------------------------------------------------------------------------
Default Handler for Exceptions / Interrupts
*----------------------------------------------------------------------------*/
void Default_Handler(void) {
while(1);
}
Drivers/CMSIS/NN/NN_Lib_Tests/nn_test/RTE/Device/ARMCM7_SP/startup_ARMCM7.s
+262
View File
@@ -0,0 +1,262 @@
;/**************************************************************************//**
; * @file startup_ARMCM7.s
; * @brief CMSIS Core Device Startup File for
; * ARMCM7 Device Series
; * @version V5.00
; * @date 02. March 2016
; ******************************************************************************/
;/*
; * Copyright (c) 2009-2016 ARM Limited. All rights reserved.
; *
; * SPDX-License-Identifier: Apache-2.0
; *
; * Licensed under the Apache License, Version 2.0 (the License); you may
; * not use this file except in compliance with the License.
; * You may obtain a copy of the License at
; *
; * www.apache.org/licenses/LICENSE-2.0
; *
; * Unless required by applicable law or agreed to in writing, software
; * distributed under the License is distributed on an AS IS BASIS, WITHOUT
; * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
; * See the License for the specific language governing permissions and
; * limitations under the License.
; */
;/*
;//-------- <<< Use Configuration Wizard in Context Menu >>> ------------------
;*/
; <h> Stack Configuration
; <o> Stack Size (in Bytes) <0x0-0xFFFFFFFF:8>
; </h>
Stack_Size EQU 0x00000400
AREA STACK, NOINIT, READWRITE, ALIGN=3
Stack_Mem SPACE Stack_Size
__initial_sp
; <h> Heap Configuration
; <o> Heap Size (in Bytes) <0x0-0xFFFFFFFF:8>
; </h>
Heap_Size EQU 0x00080000
AREA HEAP, NOINIT, READWRITE, ALIGN=3
__heap_base
Heap_Mem SPACE Heap_Size
__heap_limit
PRESERVE8
THUMB
; Vector Table Mapped to Address 0 at Reset
AREA RESET, DATA, READONLY
EXPORT __Vectors
EXPORT __Vectors_End
EXPORT __Vectors_Size
__Vectors DCD __initial_sp ; Top of Stack
DCD Reset_Handler ; Reset Handler
DCD NMI_Handler ; NMI Handler
DCD HardFault_Handler ; Hard Fault Handler
DCD MemManage_Handler ; MPU Fault Handler
DCD BusFault_Handler ; Bus Fault Handler
DCD UsageFault_Handler ; Usage Fault Handler
DCD 0 ; Reserved
DCD 0 ; Reserved
DCD 0 ; Reserved
DCD 0 ; Reserved
DCD SVC_Handler ; SVCall Handler
DCD DebugMon_Handler ; Debug Monitor Handler
DCD 0 ; Reserved
DCD PendSV_Handler ; PendSV Handler
DCD SysTick_Handler ; SysTick Handler
; External Interrupts
DCD WDT_IRQHandler ; 0: Watchdog Timer
DCD RTC_IRQHandler ; 1: Real Time Clock
DCD TIM0_IRQHandler ; 2: Timer0 / Timer1
DCD TIM2_IRQHandler ; 3: Timer2 / Timer3
DCD MCIA_IRQHandler ; 4: MCIa
DCD MCIB_IRQHandler ; 5: MCIb
DCD UART0_IRQHandler ; 6: UART0 - DUT FPGA
DCD UART1_IRQHandler ; 7: UART1 - DUT FPGA
DCD UART2_IRQHandler ; 8: UART2 - DUT FPGA
DCD UART4_IRQHandler ; 9: UART4 - not connected
DCD AACI_IRQHandler ; 10: AACI / AC97
DCD CLCD_IRQHandler ; 11: CLCD Combined Interrupt
DCD ENET_IRQHandler ; 12: Ethernet
DCD USBDC_IRQHandler ; 13: USB Device
DCD USBHC_IRQHandler ; 14: USB Host Controller
DCD CHLCD_IRQHandler ; 15: Character LCD
DCD FLEXRAY_IRQHandler ; 16: Flexray
DCD CAN_IRQHandler ; 17: CAN
DCD LIN_IRQHandler ; 18: LIN
DCD I2C_IRQHandler ; 19: I2C ADC/DAC
DCD 0 ; 20: Reserved
DCD 0 ; 21: Reserved
DCD 0 ; 22: Reserved
DCD 0 ; 23: Reserved
DCD 0 ; 24: Reserved
DCD 0 ; 25: Reserved
DCD 0 ; 26: Reserved
DCD 0 ; 27: Reserved
DCD CPU_CLCD_IRQHandler ; 28: Reserved - CPU FPGA CLCD
DCD 0 ; 29: Reserved - CPU FPGA
DCD UART3_IRQHandler ; 30: UART3 - CPU FPGA
DCD SPI_IRQHandler ; 31: SPI Touchscreen - CPU FPGA
__Vectors_End
__Vectors_Size EQU __Vectors_End - __Vectors
AREA |.text|, CODE, READONLY
; Reset Handler
Reset_Handler PROC
EXPORT Reset_Handler [WEAK]
IMPORT SystemInit
IMPORT __main
LDR R0, =SystemInit
BLX R0
LDR R0, =__main
BX R0
ENDP
; Dummy Exception Handlers (infinite loops which can be modified)
NMI_Handler PROC
EXPORT NMI_Handler [WEAK]
B .
ENDP
HardFault_Handler\
PROC
EXPORT HardFault_Handler [WEAK]
B .
ENDP
MemManage_Handler\
PROC
EXPORT MemManage_Handler [WEAK]
B .
ENDP
BusFault_Handler\
PROC
EXPORT BusFault_Handler [WEAK]
B .
ENDP
UsageFault_Handler\
PROC
EXPORT UsageFault_Handler [WEAK]
B .
ENDP
SVC_Handler PROC
EXPORT SVC_Handler [WEAK]
B .
ENDP
DebugMon_Handler\
PROC
EXPORT DebugMon_Handler [WEAK]
B .
ENDP
PendSV_Handler PROC
EXPORT PendSV_Handler [WEAK]
B .
ENDP
SysTick_Handler PROC
EXPORT SysTick_Handler [WEAK]
B .
ENDP
Default_Handler PROC
EXPORT WDT_IRQHandler [WEAK]
EXPORT RTC_IRQHandler [WEAK]
EXPORT TIM0_IRQHandler [WEAK]
EXPORT TIM2_IRQHandler [WEAK]
EXPORT MCIA_IRQHandler [WEAK]
EXPORT MCIB_IRQHandler [WEAK]
EXPORT UART0_IRQHandler [WEAK]
EXPORT UART1_IRQHandler [WEAK]
EXPORT UART2_IRQHandler [WEAK]
EXPORT UART3_IRQHandler [WEAK]
EXPORT UART4_IRQHandler [WEAK]
EXPORT AACI_IRQHandler [WEAK]
EXPORT CLCD_IRQHandler [WEAK]
EXPORT ENET_IRQHandler [WEAK]
EXPORT USBDC_IRQHandler [WEAK]
EXPORT USBHC_IRQHandler [WEAK]
EXPORT CHLCD_IRQHandler [WEAK]
EXPORT FLEXRAY_IRQHandler [WEAK]
EXPORT CAN_IRQHandler [WEAK]
EXPORT LIN_IRQHandler [WEAK]
EXPORT I2C_IRQHandler [WEAK]
EXPORT CPU_CLCD_IRQHandler [WEAK]
EXPORT SPI_IRQHandler [WEAK]
WDT_IRQHandler
RTC_IRQHandler
TIM0_IRQHandler
TIM2_IRQHandler
MCIA_IRQHandler
MCIB_IRQHandler
UART0_IRQHandler
UART1_IRQHandler
UART2_IRQHandler
UART3_IRQHandler
UART4_IRQHandler
AACI_IRQHandler
CLCD_IRQHandler
ENET_IRQHandler
USBDC_IRQHandler
USBHC_IRQHandler
CHLCD_IRQHandler
FLEXRAY_IRQHandler
CAN_IRQHandler
LIN_IRQHandler
I2C_IRQHandler
CPU_CLCD_IRQHandler
SPI_IRQHandler
B .
ENDP
ALIGN
; User Initial Stack & Heap
IF :DEF:__MICROLIB
EXPORT __initial_sp
EXPORT __heap_base
EXPORT __heap_limit
ELSE
IMPORT __use_two_region_memory
EXPORT __user_initial_stackheap
__user_initial_stackheap PROC
LDR R0, = Heap_Mem
LDR R1, =(Stack_Mem + Stack_Size)
LDR R2, = (Heap_Mem + Heap_Size)
LDR R3, = Stack_Mem
BX LR
ENDP
ALIGN
ENDIF
END
Drivers/CMSIS/NN/NN_Lib_Tests/nn_test/RTE/Device/ARMCM7_SP/system_ARMCM7.c
+85
View File
@@ -0,0 +1,85 @@
/**************************************************************************//**
* @file system_ARMCM7.c
* @brief CMSIS Device System Source File for
* ARMCM7 Device Series
* @version V5.00
* @date 08. April 2016
******************************************************************************/
/*
* Copyright (c) 2009-2016 ARM Limited. All rights reserved.
*
* SPDX-License-Identifier: Apache-2.0
*
* Licensed under the Apache License, Version 2.0 (the License); you may
* not use this file except in compliance with the License.
* You may obtain a copy of the License at
*
* www.apache.org/licenses/LICENSE-2.0
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an AS IS BASIS, WITHOUT
* WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
* See the License for the specific language governing permissions and
* limitations under the License.
*/
#if defined (ARMCM7)
#include "ARMCM7.h"
#elif defined (ARMCM7_SP)
#include "ARMCM7_SP.h"
#elif defined (ARMCM7_DP)
#include "ARMCM7_DP.h"
#else
#error device not specified!
#endif
/*----------------------------------------------------------------------------
Define clocks
*----------------------------------------------------------------------------*/
#define XTAL ( 5000000U) /* Oscillator frequency */
#define SYSTEM_CLOCK (5 * XTAL)
/*----------------------------------------------------------------------------
Externals
*----------------------------------------------------------------------------*/
#if defined (__VTOR_PRESENT) && (__VTOR_PRESENT == 1)
extern uint32_t __Vectors;
#endif
/*----------------------------------------------------------------------------
System Core Clock Variable
*----------------------------------------------------------------------------*/
uint32_t SystemCoreClock = SYSTEM_CLOCK;
/*----------------------------------------------------------------------------
System Core Clock update function
*----------------------------------------------------------------------------*/
void SystemCoreClockUpdate (void)
{
SystemCoreClock = SYSTEM_CLOCK;
}
/*----------------------------------------------------------------------------
System initialization function
*----------------------------------------------------------------------------*/
void SystemInit (void)
{
#if defined (__VTOR_PRESENT) && (__VTOR_PRESENT == 1)
SCB->VTOR = (uint32_t) &__Vectors;
#endif
#if defined (__FPU_USED) && (__FPU_USED == 1)
SCB->CPACR |= ((3U << 10*2) | /* set CP10 Full Access */
(3U << 11*2) ); /* set CP11 Full Access */
#endif
#ifdef UNALIGNED_SUPPORT_DISABLE
SCB->CCR |= SCB_CCR_UNALIGN_TRP_Msk;
#endif
SystemCoreClock = SYSTEM_CLOCK;
}
Drivers/CMSIS/NN/NN_Lib_Tests/nn_test/RTE/Device/STM32F411RETx/startup_stm32f411xe.s
+395
View File
@@ -0,0 +1,395 @@
;******************** (C) COPYRIGHT 2016 STMicroelectronics ********************
;* File Name : startup_stm32f411xe.s
;* Author : MCD Application Team
;* Version : V2.6.0
;* Date : 04-November-2016
;* Description : STM32F411xExx devices vector table for MDK-ARM toolchain.
;* This module performs:
;* - Set the initial SP
;* - Set the initial PC == Reset_Handler
;* - Set the vector table entries with the exceptions ISR address
;* - Branches to __main in the C library (which eventually
;* calls main()).
;* After Reset the CortexM4 processor is in Thread mode,
;* priority is Privileged, and the Stack is set to Main.
;* <<< Use Configuration Wizard in Context Menu >>>
;*******************************************************************************
;
;* Redistribution and use in source and binary forms, with or without modification,
;* are permitted provided that the following conditions are met:
;* 1. Redistributions of source code must retain the above copyright notice,
;* this list of conditions and the following disclaimer.
;* 2. Redistributions in binary form must reproduce the above copyright notice,
;* this list of conditions and the following disclaimer in the documentation
;* and/or other materials provided with the distribution.
;* 3. Neither the name of STMicroelectronics nor the names of its contributors
;* may be used to endorse or promote products derived from this software
;* without specific prior written permission.
;*
;* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
;* AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
;* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
;* DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
;* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
;* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
;* SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
;* CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
;* OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
;* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
;
;*******************************************************************************
; Amount of memory (in bytes) allocated for Stack
; Tailor this value to your application needs
; <h> Stack Configuration
; <o> Stack Size (in Bytes) <0x0-0xFFFFFFFF:8>
; </h>
Stack_Size EQU 0x00000400
AREA STACK, NOINIT, READWRITE, ALIGN=3
Stack_Mem SPACE Stack_Size
__initial_sp
; <h> Heap Configuration
; <o> Heap Size (in Bytes) <0x0-0xFFFFFFFF:8>
; </h>
Heap_Size EQU 0x00000200
AREA HEAP, NOINIT, READWRITE, ALIGN=3
__heap_base
Heap_Mem SPACE Heap_Size
__heap_limit
PRESERVE8
THUMB
; Vector Table Mapped to Address 0 at Reset
AREA RESET, DATA, READONLY
EXPORT __Vectors
EXPORT __Vectors_End
EXPORT __Vectors_Size
__Vectors DCD __initial_sp ; Top of Stack
DCD Reset_Handler ; Reset Handler
DCD NMI_Handler ; NMI Handler
DCD HardFault_Handler ; Hard Fault Handler
DCD MemManage_Handler ; MPU Fault Handler
DCD BusFault_Handler ; Bus Fault Handler
DCD UsageFault_Handler ; Usage Fault Handler
DCD 0 ; Reserved
DCD 0 ; Reserved
DCD 0 ; Reserved
DCD 0 ; Reserved
DCD SVC_Handler ; SVCall Handler
DCD DebugMon_Handler ; Debug Monitor Handler
DCD 0 ; Reserved
DCD PendSV_Handler ; PendSV Handler
DCD SysTick_Handler ; SysTick Handler
; External Interrupts
DCD WWDG_IRQHandler ; Window WatchDog
DCD PVD_IRQHandler ; PVD through EXTI Line detection
DCD TAMP_STAMP_IRQHandler ; Tamper and TimeStamps through the EXTI line
DCD RTC_WKUP_IRQHandler ; RTC Wakeup through the EXTI line
DCD FLASH_IRQHandler ; FLASH
DCD RCC_IRQHandler ; RCC
DCD EXTI0_IRQHandler ; EXTI Line0
DCD EXTI1_IRQHandler ; EXTI Line1
DCD EXTI2_IRQHandler ; EXTI Line2
DCD EXTI3_IRQHandler ; EXTI Line3
DCD EXTI4_IRQHandler ; EXTI Line4
DCD DMA1_Stream0_IRQHandler ; DMA1 Stream 0
DCD DMA1_Stream1_IRQHandler ; DMA1 Stream 1
DCD DMA1_Stream2_IRQHandler ; DMA1 Stream 2
DCD DMA1_Stream3_IRQHandler ; DMA1 Stream 3
DCD DMA1_Stream4_IRQHandler ; DMA1 Stream 4
DCD DMA1_Stream5_IRQHandler ; DMA1 Stream 5
DCD DMA1_Stream6_IRQHandler ; DMA1 Stream 6
DCD ADC_IRQHandler ; ADC1, ADC2 and ADC3s
DCD 0 ; Reserved
DCD 0 ; Reserved
DCD 0 ; Reserved
DCD 0 ; Reserved
DCD EXTI9_5_IRQHandler ; External Line[9:5]s
DCD TIM1_BRK_TIM9_IRQHandler ; TIM1 Break and TIM9
DCD TIM1_UP_TIM10_IRQHandler ; TIM1 Update and TIM10
DCD TIM1_TRG_COM_TIM11_IRQHandler ; TIM1 Trigger and Commutation and TIM11
DCD TIM1_CC_IRQHandler ; TIM1 Capture Compare
DCD TIM2_IRQHandler ; TIM2
DCD TIM3_IRQHandler ; TIM3
DCD TIM4_IRQHandler ; TIM4
DCD I2C1_EV_IRQHandler ; I2C1 Event
DCD I2C1_ER_IRQHandler ; I2C1 Error
DCD I2C2_EV_IRQHandler ; I2C2 Event
DCD I2C2_ER_IRQHandler ; I2C2 Error
DCD SPI1_IRQHandler ; SPI1
DCD SPI2_IRQHandler ; SPI2
DCD USART1_IRQHandler ; USART1
DCD USART2_IRQHandler ; USART2
DCD 0 ; Reserved
DCD EXTI15_10_IRQHandler ; External Line[15:10]s
DCD RTC_Alarm_IRQHandler ; RTC Alarm (A and B) through EXTI Line
DCD OTG_FS_WKUP_IRQHandler ; USB OTG FS Wakeup through EXTI line
DCD 0 ; Reserved
DCD 0 ; Reserved
DCD 0 ; Reserved
DCD 0 ; Reserved
DCD DMA1_Stream7_IRQHandler ; DMA1 Stream7
DCD 0 ; Reserved
DCD SDIO_IRQHandler ; SDIO
DCD TIM5_IRQHandler ; TIM5
DCD SPI3_IRQHandler ; SPI3
DCD 0 ; Reserved
DCD 0 ; Reserved
DCD 0 ; Reserved
DCD 0 ; Reserved
DCD DMA2_Stream0_IRQHandler ; DMA2 Stream 0
DCD DMA2_Stream1_IRQHandler ; DMA2 Stream 1
DCD DMA2_Stream2_IRQHandler ; DMA2 Stream 2
DCD DMA2_Stream3_IRQHandler ; DMA2 Stream 3
DCD DMA2_Stream4_IRQHandler ; DMA2 Stream 4
DCD 0 ; Reserved
DCD 0 ; Reserved
DCD 0 ; Reserved
DCD 0 ; Reserved
DCD 0 ; Reserved
DCD 0 ; Reserved
DCD OTG_FS_IRQHandler ; USB OTG FS
DCD DMA2_Stream5_IRQHandler ; DMA2 Stream 5
DCD DMA2_Stream6_IRQHandler ; DMA2 Stream 6
DCD DMA2_Stream7_IRQHandler ; DMA2 Stream 7
DCD USART6_IRQHandler ; USART6
DCD I2C3_EV_IRQHandler ; I2C3 event
DCD I2C3_ER_IRQHandler ; I2C3 error
DCD 0 ; Reserved
DCD 0 ; Reserved
DCD 0 ; Reserved
DCD 0 ; Reserved
DCD 0 ; Reserved
DCD 0 ; Reserved
DCD 0 ; Reserved
DCD FPU_IRQHandler ; FPU
DCD 0 ; Reserved
DCD 0 ; Reserved
DCD SPI4_IRQHandler ; SPI4
DCD SPI5_IRQHandler ; SPI5
__Vectors_End
__Vectors_Size EQU __Vectors_End - __Vectors
AREA |.text|, CODE, READONLY
; Reset handler
Reset_Handler PROC
EXPORT Reset_Handler [WEAK]
IMPORT SystemInit
IMPORT __main
LDR R0, =SystemInit
BLX R0
LDR R0, =__main
BX R0
ENDP
; Dummy Exception Handlers (infinite loops which can be modified)
NMI_Handler PROC
EXPORT NMI_Handler [WEAK]
B .
ENDP
HardFault_Handler\
PROC
EXPORT HardFault_Handler [WEAK]
B .
ENDP
MemManage_Handler\
PROC
EXPORT MemManage_Handler [WEAK]
B .
ENDP
BusFault_Handler\
PROC
EXPORT BusFault_Handler [WEAK]
B .
ENDP
UsageFault_Handler\
PROC
EXPORT UsageFault_Handler [WEAK]
B .
ENDP
SVC_Handler PROC
EXPORT SVC_Handler [WEAK]
B .
ENDP
DebugMon_Handler\
PROC
EXPORT DebugMon_Handler [WEAK]
B .
ENDP
PendSV_Handler PROC
EXPORT PendSV_Handler [WEAK]
B .
ENDP
SysTick_Handler PROC
EXPORT SysTick_Handler [WEAK]
B .
ENDP
Default_Handler PROC
EXPORT WWDG_IRQHandler [WEAK]
EXPORT PVD_IRQHandler [WEAK]
EXPORT TAMP_STAMP_IRQHandler [WEAK]
EXPORT RTC_WKUP_IRQHandler [WEAK]
EXPORT FLASH_IRQHandler [WEAK]
EXPORT RCC_IRQHandler [WEAK]
EXPORT EXTI0_IRQHandler [WEAK]
EXPORT EXTI1_IRQHandler [WEAK]
EXPORT EXTI2_IRQHandler [WEAK]
EXPORT EXTI3_IRQHandler [WEAK]
EXPORT EXTI4_IRQHandler [WEAK]
EXPORT DMA1_Stream0_IRQHandler [WEAK]
EXPORT DMA1_Stream1_IRQHandler [WEAK]
EXPORT DMA1_Stream2_IRQHandler [WEAK]
EXPORT DMA1_Stream3_IRQHandler [WEAK]
EXPORT DMA1_Stream4_IRQHandler [WEAK]
EXPORT DMA1_Stream5_IRQHandler [WEAK]
EXPORT DMA1_Stream6_IRQHandler [WEAK]
EXPORT ADC_IRQHandler [WEAK]
EXPORT EXTI9_5_IRQHandler [WEAK]
EXPORT TIM1_BRK_TIM9_IRQHandler [WEAK]
EXPORT TIM1_UP_TIM10_IRQHandler [WEAK]
EXPORT TIM1_TRG_COM_TIM11_IRQHandler [WEAK]
EXPORT TIM1_CC_IRQHandler [WEAK]
EXPORT TIM2_IRQHandler [WEAK]
EXPORT TIM3_IRQHandler [WEAK]
EXPORT TIM4_IRQHandler [WEAK]
EXPORT I2C1_EV_IRQHandler [WEAK]
EXPORT I2C1_ER_IRQHandler [WEAK]
EXPORT I2C2_EV_IRQHandler [WEAK]
EXPORT I2C2_ER_IRQHandler [WEAK]
EXPORT SPI1_IRQHandler [WEAK]
EXPORT SPI2_IRQHandler [WEAK]
EXPORT USART1_IRQHandler [WEAK]
EXPORT USART2_IRQHandler [WEAK]
EXPORT EXTI15_10_IRQHandler [WEAK]
EXPORT RTC_Alarm_IRQHandler [WEAK]
EXPORT OTG_FS_WKUP_IRQHandler [WEAK]
EXPORT DMA1_Stream7_IRQHandler [WEAK]
EXPORT SDIO_IRQHandler [WEAK]
EXPORT TIM5_IRQHandler [WEAK]
EXPORT SPI3_IRQHandler [WEAK]
EXPORT DMA2_Stream0_IRQHandler [WEAK]
EXPORT DMA2_Stream1_IRQHandler [WEAK]
EXPORT DMA2_Stream2_IRQHandler [WEAK]
EXPORT DMA2_Stream3_IRQHandler [WEAK]
EXPORT DMA2_Stream4_IRQHandler [WEAK]
EXPORT OTG_FS_IRQHandler [WEAK]
EXPORT DMA2_Stream5_IRQHandler [WEAK]
EXPORT DMA2_Stream6_IRQHandler [WEAK]
EXPORT DMA2_Stream7_IRQHandler [WEAK]
EXPORT USART6_IRQHandler [WEAK]
EXPORT I2C3_EV_IRQHandler [WEAK]
EXPORT I2C3_ER_IRQHandler [WEAK]
EXPORT FPU_IRQHandler [WEAK]
EXPORT SPI4_IRQHandler [WEAK]
EXPORT SPI5_IRQHandler [WEAK]
WWDG_IRQHandler
PVD_IRQHandler
TAMP_STAMP_IRQHandler
RTC_WKUP_IRQHandler
FLASH_IRQHandler
RCC_IRQHandler
EXTI0_IRQHandler
EXTI1_IRQHandler
EXTI2_IRQHandler
EXTI3_IRQHandler
EXTI4_IRQHandler
DMA1_Stream0_IRQHandler
DMA1_Stream1_IRQHandler
DMA1_Stream2_IRQHandler
DMA1_Stream3_IRQHandler
DMA1_Stream4_IRQHandler
DMA1_Stream5_IRQHandler
DMA1_Stream6_IRQHandler
ADC_IRQHandler
EXTI9_5_IRQHandler
TIM1_BRK_TIM9_IRQHandler
TIM1_UP_TIM10_IRQHandler
TIM1_TRG_COM_TIM11_IRQHandler
TIM1_CC_IRQHandler
TIM2_IRQHandler
TIM3_IRQHandler
TIM4_IRQHandler
I2C1_EV_IRQHandler
I2C1_ER_IRQHandler
I2C2_EV_IRQHandler
I2C2_ER_IRQHandler
SPI1_IRQHandler
SPI2_IRQHandler
USART1_IRQHandler
USART2_IRQHandler
EXTI15_10_IRQHandler
RTC_Alarm_IRQHandler
OTG_FS_WKUP_IRQHandler
DMA1_Stream7_IRQHandler
SDIO_IRQHandler
TIM5_IRQHandler
SPI3_IRQHandler
DMA2_Stream0_IRQHandler
DMA2_Stream1_IRQHandler
DMA2_Stream2_IRQHandler
DMA2_Stream3_IRQHandler
DMA2_Stream4_IRQHandler
OTG_FS_IRQHandler
DMA2_Stream5_IRQHandler
DMA2_Stream6_IRQHandler
DMA2_Stream7_IRQHandler
USART6_IRQHandler
I2C3_EV_IRQHandler
I2C3_ER_IRQHandler
FPU_IRQHandler
SPI4_IRQHandler
SPI5_IRQHandler
B .
ENDP
ALIGN
;*******************************************************************************
; User Stack and Heap initialization
;*******************************************************************************
IF :DEF:__MICROLIB
EXPORT __initial_sp
EXPORT __heap_base
EXPORT __heap_limit
ELSE
IMPORT __use_two_region_memory
EXPORT __user_initial_stackheap
__user_initial_stackheap
LDR R0, = Heap_Mem
LDR R1, =(Stack_Mem + Stack_Size)
LDR R2, = (Heap_Mem + Heap_Size)
LDR R3, = Stack_Mem
BX LR
ALIGN
ENDIF
END
;************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE*****
Drivers/CMSIS/NN/NN_Lib_Tests/nn_test/RTE/Device/STM32F411RETx/system_stm32f4xx.c
+763
View File
@@ -0,0 +1,763 @@
/**
******************************************************************************
* @file system_stm32f4xx.c
* @author MCD Application Team
* @version V2.6.0
* @date 04-November-2016
* @brief CMSIS Cortex-M4 Device Peripheral Access Layer System Source File.
*
* This file provides two functions and one global variable to be called from
* user application:
* - SystemInit(): This function is called at startup just after reset and
* before branch to main program. This call is made inside
* the "startup_stm32f4xx.s" file.
*
* - SystemCoreClock variable: Contains the core clock (HCLK), it can be used
* by the user application to setup the SysTick
* timer or configure other parameters.
*
* - SystemCoreClockUpdate(): Updates the variable SystemCoreClock and must
* be called whenever the core clock is changed
* during program execution.
*
*
******************************************************************************
* @attention
*
* <h2><center>&copy; COPYRIGHT 2016 STMicroelectronics</center></h2>
*
* Redistribution and use in source and binary forms, with or without modification,
* are permitted provided that the following conditions are met:
* 1. Redistributions of source code must retain the above copyright notice,
* this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright notice,
* this list of conditions and the following disclaimer in the documentation
* and/or other materials provided with the distribution.
* 3. Neither the name of STMicroelectronics nor the names of its contributors
* may be used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
* AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
* DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
* SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
* CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
* OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*
******************************************************************************
*/
/** @addtogroup CMSIS
* @{
*/
/** @addtogroup stm32f4xx_system
* @{
*/
/** @addtogroup STM32F4xx_System_Private_Includes
* @{
*/
#include "stm32f4xx.h"
#if !defined (HSE_VALUE)
#define HSE_VALUE ((uint32_t)25000000) /*!< Default value of the External oscillator in Hz */
#endif /* HSE_VALUE */
#if !defined (HSI_VALUE)
#define HSI_VALUE ((uint32_t)16000000) /*!< Value of the Internal oscillator in Hz*/
#endif /* HSI_VALUE */
/**
* @}
*/
/** @addtogroup STM32F4xx_System_Private_TypesDefinitions
* @{
*/
/**
* @}
*/
/** @addtogroup STM32F4xx_System_Private_Defines
* @{
*/
/************************* Miscellaneous Configuration ************************/
/*!< Uncomment the following line if you need to use external SRAM or SDRAM as data memory */
#if defined(STM32F405xx) || defined(STM32F415xx) || defined(STM32F407xx) || defined(STM32F417xx)\
|| defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx)\
|| defined(STM32F469xx) || defined(STM32F479xx) || defined(STM32F412Zx) || defined(STM32F412Vx)
/* #define DATA_IN_ExtSRAM */
#endif /* STM32F40xxx || STM32F41xxx || STM32F42xxx || STM32F43xxx || STM32F469xx || STM32F479xx ||\
STM32F412Zx || STM32F412Vx */
#if defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx)\
|| defined(STM32F446xx) || defined(STM32F469xx) || defined(STM32F479xx)
/* #define DATA_IN_ExtSDRAM */
#endif /* STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx || STM32F446xx || STM32F469xx ||\
STM32F479xx */
/*!< Uncomment the following line if you need to relocate your vector Table in
Internal SRAM. */
/* #define VECT_TAB_SRAM */
#define VECT_TAB_OFFSET 0x00 /*!< Vector Table base offset field.
This value must be a multiple of 0x200. */
/******************************************************************************/
/**
* @}
*/
/** @addtogroup STM32F4xx_System_Private_Macros
* @{
*/
/**
* @}
*/
/** @addtogroup STM32F4xx_System_Private_Variables
* @{
*/
/* This variable is updated in three ways:
1) by calling CMSIS function SystemCoreClockUpdate()
2) by calling HAL API function HAL_RCC_GetHCLKFreq()
3) each time HAL_RCC_ClockConfig() is called to configure the system clock frequency
Note: If you use this function to configure the system clock; then there
is no need to call the 2 first functions listed above, since SystemCoreClock
variable is updated automatically.
*/
uint32_t SystemCoreClock = 16000000;
const uint8_t AHBPrescTable[16] = {0, 0, 0, 0, 0, 0, 0, 0, 1, 2, 3, 4, 6, 7, 8, 9};
const uint8_t APBPrescTable[8] = {0, 0, 0, 0, 1, 2, 3, 4};
/**
* @}
*/
/** @addtogroup STM32F4xx_System_Private_FunctionPrototypes
* @{
*/
#if defined (DATA_IN_ExtSRAM) || defined (DATA_IN_ExtSDRAM)
static void SystemInit_ExtMemCtl(void);
#endif /* DATA_IN_ExtSRAM || DATA_IN_ExtSDRAM */
/**
* @}
*/
/** @addtogroup STM32F4xx_System_Private_Functions
* @{
*/
/**
* @brief Setup the microcontroller system
* Initialize the FPU setting, vector table location and External memory
* configuration.
* @param None
* @retval None
*/
void SystemInit(void)
{
/* FPU settings ------------------------------------------------------------*/
#if (__FPU_PRESENT == 1) && (__FPU_USED == 1)
SCB->CPACR |= ((3UL << 10*2)|(3UL << 11*2)); /* set CP10 and CP11 Full Access */
#endif
/* Reset the RCC clock configuration to the default reset state ------------*/
/* Set HSION bit */
RCC->CR |= (uint32_t)0x00000001;
/* Reset CFGR register */
RCC->CFGR = 0x00000000;
/* Reset HSEON, CSSON and PLLON bits */
RCC->CR &= (uint32_t)0xFEF6FFFF;
/* Reset PLLCFGR register */
RCC->PLLCFGR = 0x24003010;
/* Reset HSEBYP bit */
RCC->CR &= (uint32_t)0xFFFBFFFF;
/* Disable all interrupts */
RCC->CIR = 0x00000000;
#if defined (DATA_IN_ExtSRAM) || defined (DATA_IN_ExtSDRAM)
SystemInit_ExtMemCtl();
#endif /* DATA_IN_ExtSRAM || DATA_IN_ExtSDRAM */
/* Configure the Vector Table location add offset address ------------------*/
#ifdef VECT_TAB_SRAM
SCB->VTOR = SRAM_BASE | VECT_TAB_OFFSET; /* Vector Table Relocation in Internal SRAM */
#else
SCB->VTOR = FLASH_BASE | VECT_TAB_OFFSET; /* Vector Table Relocation in Internal FLASH */
#endif
}
/**
* @brief Update SystemCoreClock variable according to Clock Register Values.
* The SystemCoreClock variable contains the core clock (HCLK), it can
* be used by the user application to setup the SysTick timer or configure
* other parameters.
*
* @note Each time the core clock (HCLK) changes, this function must be called
* to update SystemCoreClock variable value. Otherwise, any configuration
* based on this variable will be incorrect.
*
* @note - The system frequency computed by this function is not the real
* frequency in the chip. It is calculated based on the predefined
* constant and the selected clock source:
*
* - If SYSCLK source is HSI, SystemCoreClock will contain the HSI_VALUE(*)
*
* - If SYSCLK source is HSE, SystemCoreClock will contain the HSE_VALUE(**)
*
* - If SYSCLK source is PLL, SystemCoreClock will contain the HSE_VALUE(**)
* or HSI_VALUE(*) multiplied/divided by the PLL factors.
*
* (*) HSI_VALUE is a constant defined in stm32f4xx_hal_conf.h file (default value
* 16 MHz) but the real value may vary depending on the variations
* in voltage and temperature.
*
* (**) HSE_VALUE is a constant defined in stm32f4xx_hal_conf.h file (its value
* depends on the application requirements), user has to ensure that HSE_VALUE
* is same as the real frequency of the crystal used. Otherwise, this function
* may have wrong result.
*
* - The result of this function could be not correct when using fractional
* value for HSE crystal.
*
* @param None
* @retval None
*/
void SystemCoreClockUpdate(void)
{
uint32_t tmp = 0, pllvco = 0, pllp = 2, pllsource = 0, pllm = 2;
/* Get SYSCLK source -------------------------------------------------------*/
tmp = RCC->CFGR & RCC_CFGR_SWS;
switch (tmp)
{
case 0x00: /* HSI used as system clock source */
SystemCoreClock = HSI_VALUE;
break;
case 0x04: /* HSE used as system clock source */
SystemCoreClock = HSE_VALUE;
break;
case 0x08: /* PLL used as system clock source */
/* PLL_VCO = (HSE_VALUE or HSI_VALUE / PLL_M) * PLL_N
SYSCLK = PLL_VCO / PLL_P
*/
pllsource = (RCC->PLLCFGR & RCC_PLLCFGR_PLLSRC) >> 22;
pllm = RCC->PLLCFGR & RCC_PLLCFGR_PLLM;
if (pllsource != 0)
{
/* HSE used as PLL clock source */
pllvco = (HSE_VALUE / pllm) * ((RCC->PLLCFGR & RCC_PLLCFGR_PLLN) >> 6);
}
else
{
/* HSI used as PLL clock source */
pllvco = (HSI_VALUE / pllm) * ((RCC->PLLCFGR & RCC_PLLCFGR_PLLN) >> 6);
}
pllp = (((RCC->PLLCFGR & RCC_PLLCFGR_PLLP) >>16) + 1 ) *2;
SystemCoreClock = pllvco/pllp;
break;
default:
SystemCoreClock = HSI_VALUE;
break;
}
/* Compute HCLK frequency --------------------------------------------------*/
/* Get HCLK prescaler */
tmp = AHBPrescTable[((RCC->CFGR & RCC_CFGR_HPRE) >> 4)];
/* HCLK frequency */
SystemCoreClock >>= tmp;
}
#if defined (DATA_IN_ExtSRAM) && defined (DATA_IN_ExtSDRAM)
#if defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx)\
|| defined(STM32F469xx) || defined(STM32F479xx)
/**
* @brief Setup the external memory controller.
* Called in startup_stm32f4xx.s before jump to main.
* This function configures the external memories (SRAM/SDRAM)
* This SRAM/SDRAM will be used as program data memory (including heap and stack).
* @param None
* @retval None
*/
void SystemInit_ExtMemCtl(void)
{
__IO uint32_t tmp = 0x00;
register uint32_t tmpreg = 0, timeout = 0xFFFF;
register __IO uint32_t index;
/* Enable GPIOC, GPIOD, GPIOE, GPIOF, GPIOG, GPIOH and GPIOI interface clock */
RCC->AHB1ENR |= 0x000001F8;
/* Delay after an RCC peripheral clock enabling */
tmp = READ_BIT(RCC->AHB1ENR, RCC_AHB1ENR_GPIOCEN);
/* Connect PDx pins to FMC Alternate function */
GPIOD->AFR[0] = 0x00CCC0CC;
GPIOD->AFR[1] = 0xCCCCCCCC;
/* Configure PDx pins in Alternate function mode */
GPIOD->MODER = 0xAAAA0A8A;
/* Configure PDx pins speed to 100 MHz */
GPIOD->OSPEEDR = 0xFFFF0FCF;
/* Configure PDx pins Output type to push-pull */
GPIOD->OTYPER = 0x00000000;
/* No pull-up, pull-down for PDx pins */
GPIOD->PUPDR = 0x00000000;
/* Connect PEx pins to FMC Alternate function */
GPIOE->AFR[0] = 0xC00CC0CC;
GPIOE->AFR[1] = 0xCCCCCCCC;
/* Configure PEx pins in Alternate function mode */
GPIOE->MODER = 0xAAAA828A;
/* Configure PEx pins speed to 100 MHz */
GPIOE->OSPEEDR = 0xFFFFC3CF;
/* Configure PEx pins Output type to push-pull */
GPIOE->OTYPER = 0x00000000;
/* No pull-up, pull-down for PEx pins */
GPIOE->PUPDR = 0x00000000;
/* Connect PFx pins to FMC Alternate function */
GPIOF->AFR[0] = 0xCCCCCCCC;
GPIOF->AFR[1] = 0xCCCCCCCC;
/* Configure PFx pins in Alternate function mode */
GPIOF->MODER = 0xAA800AAA;
/* Configure PFx pins speed to 50 MHz */
GPIOF->OSPEEDR = 0xAA800AAA;
/* Configure PFx pins Output type to push-pull */
GPIOF->OTYPER = 0x00000000;
/* No pull-up, pull-down for PFx pins */
GPIOF->PUPDR = 0x00000000;
/* Connect PGx pins to FMC Alternate function */
GPIOG->AFR[0] = 0xCCCCCCCC;
GPIOG->AFR[1] = 0xCCCCCCCC;
/* Configure PGx pins in Alternate function mode */
GPIOG->MODER = 0xAAAAAAAA;
/* Configure PGx pins speed to 50 MHz */
GPIOG->OSPEEDR = 0xAAAAAAAA;
/* Configure PGx pins Output type to push-pull */
GPIOG->OTYPER = 0x00000000;
/* No pull-up, pull-down for PGx pins */
GPIOG->PUPDR = 0x00000000;
/* Connect PHx pins to FMC Alternate function */
GPIOH->AFR[0] = 0x00C0CC00;
GPIOH->AFR[1] = 0xCCCCCCCC;
/* Configure PHx pins in Alternate function mode */
GPIOH->MODER = 0xAAAA08A0;
/* Configure PHx pins speed to 50 MHz */
GPIOH->OSPEEDR = 0xAAAA08A0;
/* Configure PHx pins Output type to push-pull */
GPIOH->OTYPER = 0x00000000;
/* No pull-up, pull-down for PHx pins */
GPIOH->PUPDR = 0x00000000;
/* Connect PIx pins to FMC Alternate function */
GPIOI->AFR[0] = 0xCCCCCCCC;
GPIOI->AFR[1] = 0x00000CC0;
/* Configure PIx pins in Alternate function mode */
GPIOI->MODER = 0x0028AAAA;
/* Configure PIx pins speed to 50 MHz */
GPIOI->OSPEEDR = 0x0028AAAA;
/* Configure PIx pins Output type to push-pull */
GPIOI->OTYPER = 0x00000000;
/* No pull-up, pull-down for PIx pins */
GPIOI->PUPDR = 0x00000000;
/*-- FMC Configuration -------------------------------------------------------*/
/* Enable the FMC interface clock */
RCC->AHB3ENR |= 0x00000001;
/* Delay after an RCC peripheral clock enabling */
tmp = READ_BIT(RCC->AHB3ENR, RCC_AHB3ENR_FMCEN);
FMC_Bank5_6->SDCR[0] = 0x000019E4;
FMC_Bank5_6->SDTR[0] = 0x01115351;
/* SDRAM initialization sequence */
/* Clock enable command */
FMC_Bank5_6->SDCMR = 0x00000011;
tmpreg = FMC_Bank5_6->SDSR & 0x00000020;
while((tmpreg != 0) && (timeout-- > 0))
{
tmpreg = FMC_Bank5_6->SDSR & 0x00000020;
}
/* Delay */
for (index = 0; index<1000; index++);
/* PALL command */
FMC_Bank5_6->SDCMR = 0x00000012;
timeout = 0xFFFF;
while((tmpreg != 0) && (timeout-- > 0))
{
tmpreg = FMC_Bank5_6->SDSR & 0x00000020;
}
/* Auto refresh command */
FMC_Bank5_6->SDCMR = 0x00000073;
timeout = 0xFFFF;
while((tmpreg != 0) && (timeout-- > 0))
{
tmpreg = FMC_Bank5_6->SDSR & 0x00000020;
}
/* MRD register program */
FMC_Bank5_6->SDCMR = 0x00046014;
timeout = 0xFFFF;
while((tmpreg != 0) && (timeout-- > 0))
{
tmpreg = FMC_Bank5_6->SDSR & 0x00000020;
}
/* Set refresh count */
tmpreg = FMC_Bank5_6->SDRTR;
FMC_Bank5_6->SDRTR = (tmpreg | (0x0000027C<<1));
/* Disable write protection */
tmpreg = FMC_Bank5_6->SDCR[0];
FMC_Bank5_6->SDCR[0] = (tmpreg & 0xFFFFFDFF);
#if defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx)
/* Configure and enable Bank1_SRAM2 */
FMC_Bank1->BTCR[2] = 0x00001011;
FMC_Bank1->BTCR[3] = 0x00000201;
FMC_Bank1E->BWTR[2] = 0x0fffffff;
#endif /* STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx */
#if defined(STM32F469xx) || defined(STM32F479xx)
/* Configure and enable Bank1_SRAM2 */
FMC_Bank1->BTCR[2] = 0x00001091;
FMC_Bank1->BTCR[3] = 0x00110212;
FMC_Bank1E->BWTR[2] = 0x0fffffff;
#endif /* STM32F469xx || STM32F479xx */
(void)(tmp);
}
#endif /* STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx || STM32F469xx || STM32F479xx */
#elif defined (DATA_IN_ExtSRAM) || defined (DATA_IN_ExtSDRAM)
/**
* @brief Setup the external memory controller.
* Called in startup_stm32f4xx.s before jump to main.
* This function configures the external memories (SRAM/SDRAM)
* This SRAM/SDRAM will be used as program data memory (including heap and stack).
* @param None
* @retval None
*/
void SystemInit_ExtMemCtl(void)
{
__IO uint32_t tmp = 0x00;
#if defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx)\
|| defined(STM32F446xx) || defined(STM32F469xx) || defined(STM32F479xx)
#if defined (DATA_IN_ExtSDRAM)
register uint32_t tmpreg = 0, timeout = 0xFFFF;
register __IO uint32_t index;
#if defined(STM32F446xx)
/* Enable GPIOA, GPIOC, GPIOD, GPIOE, GPIOF, GPIOG interface
clock */
RCC->AHB1ENR |= 0x0000007D;
#else
/* Enable GPIOC, GPIOD, GPIOE, GPIOF, GPIOG, GPIOH and GPIOI interface
clock */
RCC->AHB1ENR |= 0x000001F8;
#endif /* STM32F446xx */
/* Delay after an RCC peripheral clock enabling */
tmp = READ_BIT(RCC->AHB1ENR, RCC_AHB1ENR_GPIOCEN);
#if defined(STM32F446xx)
/* Connect PAx pins to FMC Alternate function */
GPIOA->AFR[0] |= 0xC0000000;
GPIOA->AFR[1] |= 0x00000000;
/* Configure PDx pins in Alternate function mode */
GPIOA->MODER |= 0x00008000;
/* Configure PDx pins speed to 50 MHz */
GPIOA->OSPEEDR |= 0x00008000;
/* Configure PDx pins Output type to push-pull */
GPIOA->OTYPER |= 0x00000000;
/* No pull-up, pull-down for PDx pins */
GPIOA->PUPDR |= 0x00000000;
/* Connect PCx pins to FMC Alternate function */
GPIOC->AFR[0] |= 0x00CC0000;
GPIOC->AFR[1] |= 0x00000000;
/* Configure PDx pins in Alternate function mode */
GPIOC->MODER |= 0x00000A00;
/* Configure PDx pins speed to 50 MHz */
GPIOC->OSPEEDR |= 0x00000A00;
/* Configure PDx pins Output type to push-pull */
GPIOC->OTYPER |= 0x00000000;
/* No pull-up, pull-down for PDx pins */
GPIOC->PUPDR |= 0x00000000;
#endif /* STM32F446xx */
/* Connect PDx pins to FMC Alternate function */
GPIOD->AFR[0] = 0x000000CC;
GPIOD->AFR[1] = 0xCC000CCC;
/* Configure PDx pins in Alternate function mode */
GPIOD->MODER = 0xA02A000A;
/* Configure PDx pins speed to 50 MHz */
GPIOD->OSPEEDR = 0xA02A000A;
/* Configure PDx pins Output type to push-pull */
GPIOD->OTYPER = 0x00000000;
/* No pull-up, pull-down for PDx pins */
GPIOD->PUPDR = 0x00000000;
/* Connect PEx pins to FMC Alternate function */
GPIOE->AFR[0] = 0xC00000CC;
GPIOE->AFR[1] = 0xCCCCCCCC;
/* Configure PEx pins in Alternate function mode */
GPIOE->MODER = 0xAAAA800A;
/* Configure PEx pins speed to 50 MHz */
GPIOE->OSPEEDR = 0xAAAA800A;
/* Configure PEx pins Output type to push-pull */
GPIOE->OTYPER = 0x00000000;
/* No pull-up, pull-down for PEx pins */
GPIOE->PUPDR = 0x00000000;
/* Connect PFx pins to FMC Alternate function */
GPIOF->AFR[0] = 0xCCCCCCCC;
GPIOF->AFR[1] = 0xCCCCCCCC;
/* Configure PFx pins in Alternate function mode */
GPIOF->MODER = 0xAA800AAA;
/* Configure PFx pins speed to 50 MHz */
GPIOF->OSPEEDR = 0xAA800AAA;
/* Configure PFx pins Output type to push-pull */
GPIOF->OTYPER = 0x00000000;
/* No pull-up, pull-down for PFx pins */
GPIOF->PUPDR = 0x00000000;
/* Connect PGx pins to FMC Alternate function */
GPIOG->AFR[0] = 0xCCCCCCCC;
GPIOG->AFR[1] = 0xCCCCCCCC;
/* Configure PGx pins in Alternate function mode */
GPIOG->MODER = 0xAAAAAAAA;
/* Configure PGx pins speed to 50 MHz */
GPIOG->OSPEEDR = 0xAAAAAAAA;
/* Configure PGx pins Output type to push-pull */
GPIOG->OTYPER = 0x00000000;
/* No pull-up, pull-down for PGx pins */
GPIOG->PUPDR = 0x00000000;
#if defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx)\
|| defined(STM32F469xx) || defined(STM32F479xx)
/* Connect PHx pins to FMC Alternate function */
GPIOH->AFR[0] = 0x00C0CC00;
GPIOH->AFR[1] = 0xCCCCCCCC;
/* Configure PHx pins in Alternate function mode */
GPIOH->MODER = 0xAAAA08A0;
/* Configure PHx pins speed to 50 MHz */
GPIOH->OSPEEDR = 0xAAAA08A0;
/* Configure PHx pins Output type to push-pull */
GPIOH->OTYPER = 0x00000000;
/* No pull-up, pull-down for PHx pins */
GPIOH->PUPDR = 0x00000000;
/* Connect PIx pins to FMC Alternate function */
GPIOI->AFR[0] = 0xCCCCCCCC;
GPIOI->AFR[1] = 0x00000CC0;
/* Configure PIx pins in Alternate function mode */
GPIOI->MODER = 0x0028AAAA;
/* Configure PIx pins speed to 50 MHz */
GPIOI->OSPEEDR = 0x0028AAAA;
/* Configure PIx pins Output type to push-pull */
GPIOI->OTYPER = 0x00000000;
/* No pull-up, pull-down for PIx pins */
GPIOI->PUPDR = 0x00000000;
#endif /* STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx || STM32F469xx || STM32F479xx */
/*-- FMC Configuration -------------------------------------------------------*/
/* Enable the FMC interface clock */
RCC->AHB3ENR |= 0x00000001;
/* Delay after an RCC peripheral clock enabling */
tmp = READ_BIT(RCC->AHB3ENR, RCC_AHB3ENR_FMCEN);
/* Configure and enable SDRAM bank1 */
#if defined(STM32F446xx)
FMC_Bank5_6->SDCR[0] = 0x00001954;
#else
FMC_Bank5_6->SDCR[0] = 0x000019E4;
#endif /* STM32F446xx */
FMC_Bank5_6->SDTR[0] = 0x01115351;
/* SDRAM initialization sequence */
/* Clock enable command */
FMC_Bank5_6->SDCMR = 0x00000011;
tmpreg = FMC_Bank5_6->SDSR & 0x00000020;
while((tmpreg != 0) && (timeout-- > 0))
{
tmpreg = FMC_Bank5_6->SDSR & 0x00000020;
}
/* Delay */
for (index = 0; index<1000; index++);
/* PALL command */
FMC_Bank5_6->SDCMR = 0x00000012;
timeout = 0xFFFF;
while((tmpreg != 0) && (timeout-- > 0))
{
tmpreg = FMC_Bank5_6->SDSR & 0x00000020;
}
/* Auto refresh command */
#if defined(STM32F446xx)
FMC_Bank5_6->SDCMR = 0x000000F3;
#else
FMC_Bank5_6->SDCMR = 0x00000073;
#endif /* STM32F446xx */
timeout = 0xFFFF;
while((tmpreg != 0) && (timeout-- > 0))
{
tmpreg = FMC_Bank5_6->SDSR & 0x00000020;
}
/* MRD register program */
#if defined(STM32F446xx)
FMC_Bank5_6->SDCMR = 0x00044014;
#else
FMC_Bank5_6->SDCMR = 0x00046014;
#endif /* STM32F446xx */
timeout = 0xFFFF;
while((tmpreg != 0) && (timeout-- > 0))
{
tmpreg = FMC_Bank5_6->SDSR & 0x00000020;
}
/* Set refresh count */
tmpreg = FMC_Bank5_6->SDRTR;
#if defined(STM32F446xx)
FMC_Bank5_6->SDRTR = (tmpreg | (0x0000050C<<1));
#else
FMC_Bank5_6->SDRTR = (tmpreg | (0x0000027C<<1));
#endif /* STM32F446xx */
/* Disable write protection */
tmpreg = FMC_Bank5_6->SDCR[0];
FMC_Bank5_6->SDCR[0] = (tmpreg & 0xFFFFFDFF);
#endif /* DATA_IN_ExtSDRAM */
#endif /* STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx || STM32F446xx || STM32F469xx || STM32F479xx */
#if defined(STM32F405xx) || defined(STM32F415xx) || defined(STM32F407xx) || defined(STM32F417xx)\
|| defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx)\
|| defined(STM32F469xx) || defined(STM32F479xx) || defined(STM32F412Zx) || defined(STM32F412Vx)
#if defined(DATA_IN_ExtSRAM)
/*-- GPIOs Configuration -----------------------------------------------------*/
/* Enable GPIOD, GPIOE, GPIOF and GPIOG interface clock */
RCC->AHB1ENR |= 0x00000078;
/* Delay after an RCC peripheral clock enabling */
tmp = READ_BIT(RCC->AHB1ENR, RCC_AHB1ENR_GPIODEN);
/* Connect PDx pins to FMC Alternate function */
GPIOD->AFR[0] = 0x00CCC0CC;
GPIOD->AFR[1] = 0xCCCCCCCC;
/* Configure PDx pins in Alternate function mode */
GPIOD->MODER = 0xAAAA0A8A;
/* Configure PDx pins speed to 100 MHz */
GPIOD->OSPEEDR = 0xFFFF0FCF;
/* Configure PDx pins Output type to push-pull */
GPIOD->OTYPER = 0x00000000;
/* No pull-up, pull-down for PDx pins */
GPIOD->PUPDR = 0x00000000;
/* Connect PEx pins to FMC Alternate function */
GPIOE->AFR[0] = 0xC00CC0CC;
GPIOE->AFR[1] = 0xCCCCCCCC;
/* Configure PEx pins in Alternate function mode */
GPIOE->MODER = 0xAAAA828A;
/* Configure PEx pins speed to 100 MHz */
GPIOE->OSPEEDR = 0xFFFFC3CF;
/* Configure PEx pins Output type to push-pull */
GPIOE->OTYPER = 0x00000000;
/* No pull-up, pull-down for PEx pins */
GPIOE->PUPDR = 0x00000000;
/* Connect PFx pins to FMC Alternate function */
GPIOF->AFR[0] = 0x00CCCCCC;
GPIOF->AFR[1] = 0xCCCC0000;
/* Configure PFx pins in Alternate function mode */
GPIOF->MODER = 0xAA000AAA;
/* Configure PFx pins speed to 100 MHz */
GPIOF->OSPEEDR = 0xFF000FFF;
/* Configure PFx pins Output type to push-pull */
GPIOF->OTYPER = 0x00000000;
/* No pull-up, pull-down for PFx pins */
GPIOF->PUPDR = 0x00000000;
/* Connect PGx pins to FMC Alternate function */
GPIOG->AFR[0] = 0x00CCCCCC;
GPIOG->AFR[1] = 0x000000C0;
/* Configure PGx pins in Alternate function mode */
GPIOG->MODER = 0x00085AAA;
/* Configure PGx pins speed to 100 MHz */
GPIOG->OSPEEDR = 0x000CAFFF;
/* Configure PGx pins Output type to push-pull */
GPIOG->OTYPER = 0x00000000;
/* No pull-up, pull-down for PGx pins */
GPIOG->PUPDR = 0x00000000;
/*-- FMC/FSMC Configuration --------------------------------------------------*/
/* Enable the FMC/FSMC interface clock */
RCC->AHB3ENR |= 0x00000001;
#if defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx)
/* Delay after an RCC peripheral clock enabling */
tmp = READ_BIT(RCC->AHB3ENR, RCC_AHB3ENR_FMCEN);
/* Configure and enable Bank1_SRAM2 */
FMC_Bank1->BTCR[2] = 0x00001011;
FMC_Bank1->BTCR[3] = 0x00000201;
FMC_Bank1E->BWTR[2] = 0x0fffffff;
#endif /* STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx */
#if defined(STM32F469xx) || defined(STM32F479xx)
/* Delay after an RCC peripheral clock enabling */
tmp = READ_BIT(RCC->AHB3ENR, RCC_AHB3ENR_FMCEN);
/* Configure and enable Bank1_SRAM2 */
FMC_Bank1->BTCR[2] = 0x00001091;
FMC_Bank1->BTCR[3] = 0x00110212;
FMC_Bank1E->BWTR[2] = 0x0fffffff;
#endif /* STM32F469xx || STM32F479xx */
#if defined(STM32F405xx) || defined(STM32F415xx) || defined(STM32F407xx)|| defined(STM32F417xx)\
|| defined(STM32F412Zx) || defined(STM32F412Vx)
/* Delay after an RCC peripheral clock enabling */
tmp = READ_BIT(RCC->AHB3ENR, RCC_AHB3ENR_FSMCEN);
/* Configure and enable Bank1_SRAM2 */
FSMC_Bank1->BTCR[2] = 0x00001011;
FSMC_Bank1->BTCR[3] = 0x00000201;
FSMC_Bank1E->BWTR[2] = 0x0FFFFFFF;
#endif /* STM32F405xx || STM32F415xx || STM32F407xx || STM32F417xx || STM32F412Zx || STM32F412Vx */
#endif /* DATA_IN_ExtSRAM */
#endif /* STM32F405xx || STM32F415xx || STM32F407xx || STM32F417xx || STM32F427xx || STM32F437xx ||\
STM32F429xx || STM32F439xx || STM32F469xx || STM32F479xx || STM32F412Zx || STM32F412Vx */
(void)(tmp);
}
#endif /* DATA_IN_ExtSRAM && DATA_IN_ExtSDRAM */
/**
* @}
*/
/**
* @}
*/
/**
* @}
*/
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
Drivers/CMSIS/NN/NN_Lib_Tests/nn_test/RTE/_ARMCM0/RTE_Components.h
+20
View File
@@ -0,0 +1,20 @@
/*
* Auto generated Run-Time-Environment Component Configuration File
* *** Do not modify ! ***
*
* Project: 'arm_nnexamples_cifar10'
* Target: 'ARMCM0'
*/
#ifndef RTE_COMPONENTS_H
#define RTE_COMPONENTS_H
/*
* Define the Device Header File:
*/
#define CMSIS_device_header "ARMCM0.h"
#endif /* RTE_COMPONENTS_H */
Drivers/CMSIS/NN/NN_Lib_Tests/nn_test/RTE/_ARMCM3/RTE_Components.h
+26
View File
@@ -0,0 +1,26 @@
/*
* Auto generated Run-Time-Environment Component Configuration File
* *** Do not modify ! ***
*
* Project: 'arm_nnexamples_nn_test'
* Target: 'ARMCM3'
*/
#ifndef RTE_COMPONENTS_H
#define RTE_COMPONENTS_H
/*
* Define the Device Header File:
*/
#define CMSIS_device_header "ARMCM3.h"
#define RTE_Compiler_IO_STDERR /* Compiler I/O: STDERR */
#define RTE_Compiler_IO_STDERR_ITM /* Compiler I/O: STDERR ITM */
#define RTE_Compiler_IO_STDOUT /* Compiler I/O: STDOUT */
#define RTE_Compiler_IO_STDOUT_ITM /* Compiler I/O: STDOUT ITM */
#define RTE_Compiler_IO_TTY /* Compiler I/O: TTY */
#define RTE_Compiler_IO_TTY_ITM /* Compiler I/O: TTY ITM */
#endif /* RTE_COMPONENTS_H */
Drivers/CMSIS/NN/NN_Lib_Tests/nn_test/RTE/_ARMCM4_FP/RTE_Components.h
+26
View File
@@ -0,0 +1,26 @@
/*
* Auto generated Run-Time-Environment Component Configuration File
* *** Do not modify ! ***
*
* Project: 'arm_nnexamples_nn_test'
* Target: 'ARMCM4_FP'
*/
#ifndef RTE_COMPONENTS_H
#define RTE_COMPONENTS_H
/*
* Define the Device Header File:
*/
#define CMSIS_device_header "ARMCM4_FP.h"
#define RTE_Compiler_IO_STDERR /* Compiler I/O: STDERR */
#define RTE_Compiler_IO_STDERR_ITM /* Compiler I/O: STDERR ITM */
#define RTE_Compiler_IO_STDOUT /* Compiler I/O: STDOUT */
#define RTE_Compiler_IO_STDOUT_ITM /* Compiler I/O: STDOUT ITM */
#define RTE_Compiler_IO_TTY /* Compiler I/O: TTY */
#define RTE_Compiler_IO_TTY_ITM /* Compiler I/O: TTY ITM */
#endif /* RTE_COMPONENTS_H */
Drivers/CMSIS/NN/NN_Lib_Tests/nn_test/RTE/_ARMCM7_SP/RTE_Components.h
+26
View File
@@ -0,0 +1,26 @@
/*
* Auto generated Run-Time-Environment Component Configuration File
* *** Do not modify ! ***
*
* Project: 'arm_nnexamples_nn_test'
* Target: 'ARMCM7_SP'
*/
#ifndef RTE_COMPONENTS_H
#define RTE_COMPONENTS_H
/*
* Define the Device Header File:
*/
#define CMSIS_device_header "ARMCM7_SP.h"
#define RTE_Compiler_IO_STDERR /* Compiler I/O: STDERR */
#define RTE_Compiler_IO_STDERR_ITM /* Compiler I/O: STDERR ITM */
#define RTE_Compiler_IO_STDOUT /* Compiler I/O: STDOUT */
#define RTE_Compiler_IO_STDOUT_ITM /* Compiler I/O: STDOUT ITM */
#define RTE_Compiler_IO_TTY /* Compiler I/O: TTY */
#define RTE_Compiler_IO_TTY_ITM /* Compiler I/O: TTY ITM */
#endif /* RTE_COMPONENTS_H */