Trinity Devboard PCB V1.0 Firmware. FreeRTOS is setup and the MCU reads IMU data over SPI fand Magnetometer data over I2C, each with a seperate task. Sensordata is then run though MadgwickAHRS and send over USB as serial packet data to use in trinity visualizer. Bare minimum functionality works and is replicated from the first prototype.

2026-09-13 19:51:03 +02:00
commit 7ee381de58
1630 changed files with 632404 additions and 0 deletions
@@ -0,0 +1,144 @@
+/* ----------------------------------------------------------------------
+ * Project:      CMSIS DSP Library
+ * Title:        arm_sqrt_q15.c
+ * Description:  Q15 square root function
+ *
+ * $Date:        18. March 2019
+ * $Revision:    V1.6.0
+ *
+ * Target Processor: Cortex-M cores
+ * -------------------------------------------------------------------- */
+/*
+ * Copyright (C) 2010-2019 ARM Limited or its affiliates. All rights reserved.
+ *
+ * SPDX-License-Identifier: Apache-2.0
+ *
+ * Licensed under the Apache License, Version 2.0 (the License); you may
+ * not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ * www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an AS IS BASIS, WITHOUT
+ * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+#include "arm_math.h"
+#include "arm_common_tables.h"
+
+/**
+  @ingroup groupFastMath
+ */
+
+/**
+  @addtogroup SQRT
+  @{
+ */
+
+/**
+  @brief         Q15 square root function.
+  @param[in]     in    input value.  The range of the input value is [0 +1) or 0x0000 to 0x7FFF
+  @param[out]    pOut  points to square root of input value
+  @return        execution status
+                   - \ref ARM_MATH_SUCCESS        : input value is positive
+                   - \ref ARM_MATH_ARGUMENT_ERROR : input value is negative; *pOut is set to 0
+ */
+
+arm_status arm_sqrt_q15(
+  q15_t in,
+  q15_t * pOut)
+{
+  q31_t bits_val1;
+  q15_t number, temp1, var1, signBits1, half;
+  float32_t temp_float1;
+  union
+  {
+    q31_t fracval;
+    float32_t floatval;
+  } tempconv;
+
+  number = in;
+
+  /* If the input is a positive number then compute the signBits. */
+  if (number > 0)
+  {
+    signBits1 = __CLZ(number) - 17;
+
+    /* Shift by the number of signBits1 */
+    if ((signBits1 % 2) == 0)
+    {
+      number = number << signBits1;
+    }
+    else
+    {
+      number = number << (signBits1 - 1);
+    }
+
+    /* Calculate half value of the number */
+    half = number >> 1;
+    /* Store the number for later use */
+    temp1 = number;
+
+    /* Convert to float */
+    temp_float1 = number * 3.051757812500000e-005f;
+    /* Store as integer */
+    tempconv.floatval = temp_float1;
+    bits_val1 = tempconv.fracval;
+    /* Subtract the shifted value from the magic number to give intial guess */
+    bits_val1 = 0x5f3759df - (bits_val1 >> 1);  /* gives initial guess */
+    /* Store as float */
+    tempconv.fracval = bits_val1;
+    temp_float1 = tempconv.floatval;
+    /* Convert to integer format */
+    var1 = (q31_t) (temp_float1 * 16384);
+
+    /* 1st iteration */
+    var1 = ((q15_t) ((q31_t) var1 * (0x3000 -
+                                     ((q15_t)
+                                      ((((q15_t)
+                                         (((q31_t) var1 * var1) >> 15)) *
+                                        (q31_t) half) >> 15))) >> 15)) << 2;
+    /* 2nd iteration */
+    var1 = ((q15_t) ((q31_t) var1 * (0x3000 -
+                                     ((q15_t)
+                                      ((((q15_t)
+                                         (((q31_t) var1 * var1) >> 15)) *
+                                        (q31_t) half) >> 15))) >> 15)) << 2;
+    /* 3rd iteration */
+    var1 = ((q15_t) ((q31_t) var1 * (0x3000 -
+                                     ((q15_t)
+                                      ((((q15_t)
+                                         (((q31_t) var1 * var1) >> 15)) *
+                                        (q31_t) half) >> 15))) >> 15)) << 2;
+
+    /* Multiply the inverse square root with the original value */
+    var1 = ((q15_t) (((q31_t) temp1 * var1) >> 15)) << 1;
+
+    /* Shift the output down accordingly */
+    if ((signBits1 % 2) == 0)
+    {
+      var1 = var1 >> (signBits1 / 2);
+    }
+    else
+    {
+      var1 = var1 >> ((signBits1 - 1) / 2);
+    }
+    *pOut = var1;
+
+    return (ARM_MATH_SUCCESS);
+  }
+  /* If the number is a negative number then store zero as its square root value */
+  else
+  {
+    *pOut = 0;
+
+    return (ARM_MATH_ARGUMENT_ERROR);
+  }
+}
+
+/**
+  @} end of SQRT group
+ */