Trinity Devboard PCB V1.0 Firmware. FreeRTOS is setup and the MCU reads IMU data over SPI fand Magnetometer data over I2C, each with a seperate task. Sensordata is then run though MadgwickAHRS and send over USB as serial packet data to use in trinity visualizer. Bare minimum functionality works and is replicated from the first prototype.

2026-09-13 19:51:03 +02:00
commit 7ee381de58
1630 changed files with 632404 additions and 0 deletions
@@ -0,0 +1,126 @@
+/* ----------------------------------------------------------------------
+ * Project:      CMSIS DSP Library
+ * Title:        arm_negate_q7.c
+ * Description:  Negates Q7 vectors
+ *
+ * $Date:        18. March 2019
+ * $Revision:    V1.6.0
+ *
+ * Target Processor: Cortex-M cores
+ * -------------------------------------------------------------------- */
+/*
+ * Copyright (C) 2010-2019 ARM Limited or its affiliates. All rights reserved.
+ *
+ * SPDX-License-Identifier: Apache-2.0
+ *
+ * Licensed under the Apache License, Version 2.0 (the License); you may
+ * not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ * www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an AS IS BASIS, WITHOUT
+ * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+#include "arm_math.h"
+
+/**
+  @ingroup groupMath
+ */
+
+/**
+  @addtogroup BasicNegate
+  @{
+ */
+
+/**
+  @brief         Negates the elements of a Q7 vector.
+  @param[in]     pSrc       points to the input vector.
+  @param[out]    pDst       points to the output vector.
+  @param[in]     blockSize   number of samples in each vector.
+  @return        none
+
+  @par           Scaling and Overflow Behavior
+                   The function uses saturating arithmetic.
+                   The Q7 value -1 (0x80) is saturated to the maximum allowable positive value 0x7F.
+ */
+
+void arm_negate_q7(
+  const q7_t * pSrc,
+        q7_t * pDst,
+        uint32_t blockSize)
+{
+        uint32_t blkCnt;                               /* Loop counter */
+        q7_t in;                                       /* Temporary input variable */
+
+#if defined (ARM_MATH_LOOPUNROLL)
+
+#if defined (ARM_MATH_DSP)
+  q31_t in1;                                    /* Temporary input variable */
+#endif
+
+  /* Loop unrolling: Compute 4 outputs at a time */
+  blkCnt = blockSize >> 2U;
+
+  while (blkCnt > 0U)
+  {
+    /* C = -A */
+
+#if defined (ARM_MATH_DSP)
+    /* Negate and store result in destination buffer (4 samples at a time). */
+    in1 = read_q7x4_ia ((q7_t **) &pSrc);
+    write_q7x4_ia (&pDst, __QSUB8(0, in1));
+#else
+    in = *pSrc++;
+    *pDst++ = (in == (q7_t) 0x80) ? (q7_t) 0x7f : -in;
+
+    in = *pSrc++;
+    *pDst++ = (in == (q7_t) 0x80) ? (q7_t) 0x7f : -in;
+
+    in = *pSrc++;
+    *pDst++ = (in == (q7_t) 0x80) ? (q7_t) 0x7f : -in;
+
+    in = *pSrc++;
+    *pDst++ = (in == (q7_t) 0x80) ? (q7_t) 0x7f : -in;
+#endif
+
+    /* Decrement loop counter */
+    blkCnt--;
+  }
+
+  /* Loop unrolling: Compute remaining outputs */
+  blkCnt = blockSize % 0x4U;
+
+#else
+
+  /* Initialize blkCnt with number of samples */
+  blkCnt = blockSize;
+
+#endif /* #if defined (ARM_MATH_LOOPUNROLL) */
+
+  while (blkCnt > 0U)
+  {
+    /* C = -A */
+
+    /* Negate and store result in destination buffer. */
+    in = *pSrc++;
+
+#if defined (ARM_MATH_DSP)
+    *pDst++ = (q7_t) __QSUB(0, in);
+#else
+    *pDst++ = (in == (q7_t) 0x80) ? (q7_t) 0x7f : -in;
+#endif
+
+    /* Decrement loop counter */
+    blkCnt--;
+  }
+
+}
+
+/**
+  @} end of BasicNegate group
+ */