Trinity Devboard PCB V1.0 Firmware. FreeRTOS is setup and the MCU reads IMU data over SPI fand Magnetometer data over I2C, each with a seperate task. Sensordata is then run though MadgwickAHRS and send over USB as serial packet data to use in trinity visualizer. Bare minimum functionality works and is replicated from the first prototype.

2026-09-13 19:51:03 +02:00
commit 7ee381de58
1630 changed files with 632404 additions and 0 deletions
@@ -0,0 +1,109 @@
+/* ----------------------------------------------------------------------
+ * Project:      CMSIS DSP Library
+ * Title:        arm_add_q7.c
+ * Description:  Q7 vector addition
+ *
+ * $Date:        18. March 2019
+ * $Revision:    V1.6.0
+ *
+ * Target Processor: Cortex-M cores
+ * -------------------------------------------------------------------- */
+/*
+ * Copyright (C) 2010-2019 ARM Limited or its affiliates. All rights reserved.
+ *
+ * SPDX-License-Identifier: Apache-2.0
+ *
+ * Licensed under the Apache License, Version 2.0 (the License); you may
+ * not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ * www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an AS IS BASIS, WITHOUT
+ * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+#include "arm_math.h"
+
+/**
+  @ingroup groupMath
+ */
+
+/**
+  @addtogroup BasicAdd
+  @{
+ */
+
+/**
+  @brief         Q7 vector addition.
+  @param[in]     pSrcA      points to the first input vector
+  @param[in]     pSrcB      points to the second input vector
+  @param[out]    pDst       points to the output vector
+  @param[in]     blockSize  number of samples in each vector
+  @return        none
+
+  @par           Scaling and Overflow Behavior
+                   The function uses saturating arithmetic.
+                   Results outside of the allowable Q7 range [0x80 0x7F] are saturated.
+ */
+
+void arm_add_q7(
+  const q7_t * pSrcA,
+  const q7_t * pSrcB,
+        q7_t * pDst,
+        uint32_t blockSize)
+{
+        uint32_t blkCnt;                               /* Loop counter */
+
+#if defined (ARM_MATH_LOOPUNROLL)
+
+  /* Loop unrolling: Compute 4 outputs at a time */
+  blkCnt = blockSize >> 2U;
+
+  while (blkCnt > 0U)
+  {
+    /* C = A + B */
+
+#if defined (ARM_MATH_DSP)
+    /* Add and store result in destination buffer (4 samples at a time). */
+    write_q7x4_ia (&pDst, __QADD8 (read_q7x4_ia ((q7_t **) &pSrcA), read_q7x4_ia ((q7_t **) &pSrcB)));
+#else
+    *pDst++ = (q7_t) __SSAT ((q15_t) *pSrcA++ + *pSrcB++, 8);
+    *pDst++ = (q7_t) __SSAT ((q15_t) *pSrcA++ + *pSrcB++, 8);
+    *pDst++ = (q7_t) __SSAT ((q15_t) *pSrcA++ + *pSrcB++, 8);
+    *pDst++ = (q7_t) __SSAT ((q15_t) *pSrcA++ + *pSrcB++, 8);
+#endif
+
+    /* Decrement loop counter */
+    blkCnt--;
+  }
+
+  /* Loop unrolling: Compute remaining outputs */
+  blkCnt = blockSize % 0x4U;
+
+#else
+
+  /* Initialize blkCnt with number of samples */
+  blkCnt = blockSize;
+
+#endif /* #if defined (ARM_MATH_LOOPUNROLL) */
+
+  while (blkCnt > 0U)
+  {
+    /* C = A + B */
+
+    /* Add and store result in destination buffer. */
+    *pDst++ = (q7_t) __SSAT((q15_t) *pSrcA++ + *pSrcB++, 8);
+
+    /* Decrement loop counter */
+    blkCnt--;
+  }
+
+}
+
+/**
+  @} end of BasicAdd group
+ */