pima/Trinity-DevPCB-V1.0
1
0
Fork 0
Code Issues Pull Requests Actions Packages Projects Releases Wiki Activity

Trinity Devboard PCB V1.0 Firmware. FreeRTOS is setup and the MCU reads IMU data over SPI fand Magnetometer data over I2C, each with a seperate task. Sensordata is then run though MadgwickAHRS and send over USB as serial packet data to use in trinity visualizer. Bare minimum functionality works and is replicated from the first prototype.

Browse Source
This commit is contained in:
pima
2026-09-13 19:51:03 +02:00
commit 7ee381de58
1630 changed files with 632404 additions and 0 deletions
Download Patch File Download Diff File Expand all files Collapse all files
Drivers/CMSIS/DSP/Examples/ARM/arm_matrix_example/Abstract.txt
+4
View File
@@ -0,0 +1,4 @@
CMSIS DSP_Lib example arm_matrix_example for
Cortex-M0, Cortex-M3, Cortex-M4 with FPU and Cortex-M7 with single precision FPU.
The example is configured for uVision Simulator.
Drivers/CMSIS/DSP/Examples/ARM/arm_matrix_example/RTE/Device/ARMCM0/startup_ARMCM0.s
+159
View File
@@ -0,0 +1,159 @@
;/**************************************************************************//**
; * @file startup_ARMCM0.s
; * @brief CMSIS Core Device Startup File for
; * ARMCM0 Device
; * @version V5.3.1
; * @date 09. July 2018
; ******************************************************************************/
;/*
; * Copyright (c) 2009-2018 Arm Limited. All rights reserved.
; *
; * SPDX-License-Identifier: Apache-2.0
; *
; * Licensed under the Apache License, Version 2.0 (the License); you may
; * not use this file except in compliance with the License.
; * You may obtain a copy of the License at
; *
; * www.apache.org/licenses/LICENSE-2.0
; *
; * Unless required by applicable law or agreed to in writing, software
; * distributed under the License is distributed on an AS IS BASIS, WITHOUT
; * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
; * See the License for the specific language governing permissions and
; * limitations under the License.
; */
;//-------- <<< Use Configuration Wizard in Context Menu >>> ------------------
;<h> Stack Configuration
; <o> Stack Size (in Bytes) <0x0-0xFFFFFFFF:8>
;</h>
Stack_Size EQU 0x00000400
AREA STACK, NOINIT, READWRITE, ALIGN=3
__stack_limit
Stack_Mem SPACE Stack_Size
__initial_sp
;<h> Heap Configuration
; <o> Heap Size (in Bytes) <0x0-0xFFFFFFFF:8>
;</h>
Heap_Size EQU 0x00000C00
IF Heap_Size != 0 ; Heap is provided
AREA HEAP, NOINIT, READWRITE, ALIGN=3
__heap_base
Heap_Mem SPACE Heap_Size
__heap_limit
ENDIF
PRESERVE8
THUMB
; Vector Table Mapped to Address 0 at Reset
AREA RESET, DATA, READONLY
EXPORT __Vectors
EXPORT __Vectors_End
EXPORT __Vectors_Size
__Vectors DCD __initial_sp ; Top of Stack
DCD Reset_Handler ; Reset Handler
DCD NMI_Handler ; -14 NMI Handler
DCD HardFault_Handler ; -13 Hard Fault Handler
DCD 0 ; Reserved
DCD 0 ; Reserved
DCD 0 ; Reserved
DCD 0 ; Reserved
DCD 0 ; Reserved
DCD 0 ; Reserved
DCD 0 ; Reserved
DCD SVC_Handler ; -5 SVCall Handler
DCD 0 ; Reserved
DCD 0 ; Reserved
DCD PendSV_Handler ; -2 PendSV Handler
DCD SysTick_Handler ; -1 SysTick Handler
; Interrupts
DCD Interrupt0_Handler ; 0 Interrupt 0
DCD Interrupt1_Handler ; 1 Interrupt 1
DCD Interrupt2_Handler ; 2 Interrupt 2
DCD Interrupt3_Handler ; 3 Interrupt 3
DCD Interrupt4_Handler ; 4 Interrupt 4
DCD Interrupt5_Handler ; 5 Interrupt 5
DCD Interrupt6_Handler ; 6 Interrupt 6
DCD Interrupt7_Handler ; 7 Interrupt 7
DCD Interrupt8_Handler ; 8 Interrupt 8
DCD Interrupt9_Handler ; 9 Interrupt 9
SPACE ( 22 * 4) ; Interrupts 10 .. 31 are left out
__Vectors_End
__Vectors_Size EQU __Vectors_End - __Vectors
AREA |.text|, CODE, READONLY
; Reset Handler
Reset_Handler PROC
EXPORT Reset_Handler [WEAK]
IMPORT SystemInit
IMPORT __main
LDR R0, =SystemInit
BLX R0
LDR R0, =__main
BX R0
ENDP
; Macro to define default exception/interrupt handlers.
; Default handler are weak symbols with an endless loop.
; They can be overwritten by real handlers.
MACRO
Set_Default_Handler $Handler_Name
$Handler_Name PROC
EXPORT $Handler_Name [WEAK]
B .
ENDP
MEND
; Default exception/interrupt handler
Set_Default_Handler NMI_Handler
Set_Default_Handler HardFault_Handler
Set_Default_Handler SVC_Handler
Set_Default_Handler PendSV_Handler
Set_Default_Handler SysTick_Handler
Set_Default_Handler Interrupt0_Handler
Set_Default_Handler Interrupt1_Handler
Set_Default_Handler Interrupt2_Handler
Set_Default_Handler Interrupt3_Handler
Set_Default_Handler Interrupt4_Handler
Set_Default_Handler Interrupt5_Handler
Set_Default_Handler Interrupt6_Handler
Set_Default_Handler Interrupt7_Handler
Set_Default_Handler Interrupt8_Handler
Set_Default_Handler Interrupt9_Handler
ALIGN
; User setup Stack & Heap
EXPORT __stack_limit
EXPORT __initial_sp
IF Heap_Size != 0 ; Heap is provided
EXPORT __heap_base
EXPORT __heap_limit
ENDIF
END
Drivers/CMSIS/DSP/Examples/ARM/arm_matrix_example/RTE/Device/ARMCM0/system_ARMCM0.c
+56
View File
@@ -0,0 +1,56 @@
/**************************************************************************//**
* @file system_ARMCM0.c
* @brief CMSIS Device System Source File for
* ARMCM0 Device
* @version V5.3.1
* @date 09. July 2018
******************************************************************************/
/*
* Copyright (c) 2009-2018 Arm Limited. All rights reserved.
*
* SPDX-License-Identifier: Apache-2.0
*
* Licensed under the Apache License, Version 2.0 (the License); you may
* not use this file except in compliance with the License.
* You may obtain a copy of the License at
*
* www.apache.org/licenses/LICENSE-2.0
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an AS IS BASIS, WITHOUT
* WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
* See the License for the specific language governing permissions and
* limitations under the License.
*/
#include "ARMCM0.h"
/*----------------------------------------------------------------------------
Define clocks
*----------------------------------------------------------------------------*/
#define XTAL (50000000UL) /* Oscillator frequency */
#define SYSTEM_CLOCK (XTAL / 2U)
/*----------------------------------------------------------------------------
System Core Clock Variable
*----------------------------------------------------------------------------*/
uint32_t SystemCoreClock = SYSTEM_CLOCK; /* System Core Clock Frequency */
/*----------------------------------------------------------------------------
System Core Clock update function
*----------------------------------------------------------------------------*/
void SystemCoreClockUpdate (void)
{
SystemCoreClock = SYSTEM_CLOCK;
}
/*----------------------------------------------------------------------------
System initialization function
*----------------------------------------------------------------------------*/
void SystemInit (void)
{
SystemCoreClock = SYSTEM_CLOCK;
}
Drivers/CMSIS/DSP/Examples/ARM/arm_matrix_example/RTE/Device/ARMCM3/startup_ARMCM3.s
+163
View File
@@ -0,0 +1,163 @@
;/**************************************************************************//**
; * @file startup_ARMCM3.s
; * @brief CMSIS Core Device Startup File for
; * ARMCM3 Device
; * @version V5.3.1
; * @date 09. July 2018
; ******************************************************************************/
;/*
; * Copyright (c) 2009-2018 Arm Limited. All rights reserved.
; *
; * SPDX-License-Identifier: Apache-2.0
; *
; * Licensed under the Apache License, Version 2.0 (the License); you may
; * not use this file except in compliance with the License.
; * You may obtain a copy of the License at
; *
; * www.apache.org/licenses/LICENSE-2.0
; *
; * Unless required by applicable law or agreed to in writing, software
; * distributed under the License is distributed on an AS IS BASIS, WITHOUT
; * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
; * See the License for the specific language governing permissions and
; * limitations under the License.
; */
;//-------- <<< Use Configuration Wizard in Context Menu >>> ------------------
;<h> Stack Configuration
; <o> Stack Size (in Bytes) <0x0-0xFFFFFFFF:8>
;</h>
Stack_Size EQU 0x00000400
AREA STACK, NOINIT, READWRITE, ALIGN=3
__stack_limit
Stack_Mem SPACE Stack_Size
__initial_sp
;<h> Heap Configuration
; <o> Heap Size (in Bytes) <0x0-0xFFFFFFFF:8>
;</h>
Heap_Size EQU 0x00000C00
IF Heap_Size != 0 ; Heap is provided
AREA HEAP, NOINIT, READWRITE, ALIGN=3
__heap_base
Heap_Mem SPACE Heap_Size
__heap_limit
ENDIF
PRESERVE8
THUMB
; Vector Table Mapped to Address 0 at Reset
AREA RESET, DATA, READONLY
EXPORT __Vectors
EXPORT __Vectors_End
EXPORT __Vectors_Size
__Vectors DCD __initial_sp ; Top of Stack
DCD Reset_Handler ; Reset Handler
DCD NMI_Handler ; -14 NMI Handler
DCD HardFault_Handler ; -13 Hard Fault Handler
DCD MemManage_Handler ; -12 MPU Fault Handler
DCD BusFault_Handler ; -11 Bus Fault Handler
DCD UsageFault_Handler ; -10 Usage Fault Handler
DCD 0 ; Reserved
DCD 0 ; Reserved
DCD 0 ; Reserved
DCD 0 ; Reserved
DCD SVC_Handler ; -5 SVCall Handler
DCD DebugMon_Handler ; -4 Debug Monitor Handler
DCD 0 ; Reserved
DCD PendSV_Handler ; -2 PendSV Handler
DCD SysTick_Handler ; -1 SysTick Handler
; Interrupts
DCD Interrupt0_Handler ; 0 Interrupt 0
DCD Interrupt1_Handler ; 1 Interrupt 1
DCD Interrupt2_Handler ; 2 Interrupt 2
DCD Interrupt3_Handler ; 3 Interrupt 3
DCD Interrupt4_Handler ; 4 Interrupt 4
DCD Interrupt5_Handler ; 5 Interrupt 5
DCD Interrupt6_Handler ; 6 Interrupt 6
DCD Interrupt7_Handler ; 7 Interrupt 7
DCD Interrupt8_Handler ; 8 Interrupt 8
DCD Interrupt9_Handler ; 9 Interrupt 9
SPACE (214 * 4) ; Interrupts 10 .. 224 are left out
__Vectors_End
__Vectors_Size EQU __Vectors_End - __Vectors
AREA |.text|, CODE, READONLY
; Reset Handler
Reset_Handler PROC
EXPORT Reset_Handler [WEAK]
IMPORT SystemInit
IMPORT __main
LDR R0, =SystemInit
BLX R0
LDR R0, =__main
BX R0
ENDP
; Macro to define default exception/interrupt handlers.
; Default handler are weak symbols with an endless loop.
; They can be overwritten by real handlers.
MACRO
Set_Default_Handler $Handler_Name
$Handler_Name PROC
EXPORT $Handler_Name [WEAK]
B .
ENDP
MEND
; Default exception/interrupt handler
Set_Default_Handler NMI_Handler
Set_Default_Handler HardFault_Handler
Set_Default_Handler MemManage_Handler
Set_Default_Handler BusFault_Handler
Set_Default_Handler UsageFault_Handler
Set_Default_Handler SVC_Handler
Set_Default_Handler DebugMon_Handler
Set_Default_Handler PendSV_Handler
Set_Default_Handler SysTick_Handler
Set_Default_Handler Interrupt0_Handler
Set_Default_Handler Interrupt1_Handler
Set_Default_Handler Interrupt2_Handler
Set_Default_Handler Interrupt3_Handler
Set_Default_Handler Interrupt4_Handler
Set_Default_Handler Interrupt5_Handler
Set_Default_Handler Interrupt6_Handler
Set_Default_Handler Interrupt7_Handler
Set_Default_Handler Interrupt8_Handler
Set_Default_Handler Interrupt9_Handler
ALIGN
; User setup Stack & Heap
EXPORT __stack_limit
EXPORT __initial_sp
IF Heap_Size != 0 ; Heap is provided
EXPORT __heap_base
EXPORT __heap_limit
ENDIF
END
Drivers/CMSIS/DSP/Examples/ARM/arm_matrix_example/RTE/Device/ARMCM3/system_ARMCM3.c
+68
View File
@@ -0,0 +1,68 @@
/**************************************************************************//**
* @file system_ARMCM3.c
* @brief CMSIS Device System Source File for
* ARMCM3 Device
* @version V5.3.1
* @date 09. July 2018
******************************************************************************/
/*
* Copyright (c) 2009-2018 Arm Limited. All rights reserved.
*
* SPDX-License-Identifier: Apache-2.0
*
* Licensed under the Apache License, Version 2.0 (the License); you may
* not use this file except in compliance with the License.
* You may obtain a copy of the License at
*
* www.apache.org/licenses/LICENSE-2.0
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an AS IS BASIS, WITHOUT
* WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
* See the License for the specific language governing permissions and
* limitations under the License.
*/
#include "ARMCM3.h"
/*----------------------------------------------------------------------------
Define clocks
*----------------------------------------------------------------------------*/
#define XTAL (50000000UL) /* Oscillator frequency */
#define SYSTEM_CLOCK (XTAL / 2U)
/*----------------------------------------------------------------------------
Externals
*----------------------------------------------------------------------------*/
#if defined (__VTOR_PRESENT) && (__VTOR_PRESENT == 1U)
extern uint32_t __Vectors;
#endif
/*----------------------------------------------------------------------------
System Core Clock Variable
*----------------------------------------------------------------------------*/
uint32_t SystemCoreClock = SYSTEM_CLOCK; /* System Core Clock Frequency */
/*----------------------------------------------------------------------------
System Core Clock update function
*----------------------------------------------------------------------------*/
void SystemCoreClockUpdate (void)
{
SystemCoreClock = SYSTEM_CLOCK;
}
/*----------------------------------------------------------------------------
System initialization function
*----------------------------------------------------------------------------*/
void SystemInit (void)
{
#if defined (__VTOR_PRESENT) && (__VTOR_PRESENT == 1U)
SCB->VTOR = (uint32_t) &__Vectors;
#endif
SystemCoreClock = SYSTEM_CLOCK;
}
Drivers/CMSIS/DSP/Examples/ARM/arm_matrix_example/RTE/Device/ARMCM4_FP/startup_ARMCM4.s
+163
View File
@@ -0,0 +1,163 @@
;/**************************************************************************//**
; * @file startup_ARMCM4.s
; * @brief CMSIS Core Device Startup File for
; * ARMCM4 Device
; * @version V5.3.1
; * @date 09. July 2018
; ******************************************************************************/
;/*
; * Copyright (c) 2009-2018 Arm Limited. All rights reserved.
; *
; * SPDX-License-Identifier: Apache-2.0
; *
; * Licensed under the Apache License, Version 2.0 (the License); you may
; * not use this file except in compliance with the License.
; * You may obtain a copy of the License at
; *
; * www.apache.org/licenses/LICENSE-2.0
; *
; * Unless required by applicable law or agreed to in writing, software
; * distributed under the License is distributed on an AS IS BASIS, WITHOUT
; * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
; * See the License for the specific language governing permissions and
; * limitations under the License.
; */
;//-------- <<< Use Configuration Wizard in Context Menu >>> ------------------
;<h> Stack Configuration
; <o> Stack Size (in Bytes) <0x0-0xFFFFFFFF:8>
;</h>
Stack_Size EQU 0x00000400
AREA STACK, NOINIT, READWRITE, ALIGN=3
__stack_limit
Stack_Mem SPACE Stack_Size
__initial_sp
;<h> Heap Configuration
; <o> Heap Size (in Bytes) <0x0-0xFFFFFFFF:8>
;</h>
Heap_Size EQU 0x00000C00
IF Heap_Size != 0 ; Heap is provided
AREA HEAP, NOINIT, READWRITE, ALIGN=3
__heap_base
Heap_Mem SPACE Heap_Size
__heap_limit
ENDIF
PRESERVE8
THUMB
; Vector Table Mapped to Address 0 at Reset
AREA RESET, DATA, READONLY
EXPORT __Vectors
EXPORT __Vectors_End
EXPORT __Vectors_Size
__Vectors DCD __initial_sp ; Top of Stack
DCD Reset_Handler ; Reset Handler
DCD NMI_Handler ; -14 NMI Handler
DCD HardFault_Handler ; -13 Hard Fault Handler
DCD MemManage_Handler ; -12 MPU Fault Handler
DCD BusFault_Handler ; -11 Bus Fault Handler
DCD UsageFault_Handler ; -10 Usage Fault Handler
DCD 0 ; Reserved
DCD 0 ; Reserved
DCD 0 ; Reserved
DCD 0 ; Reserved
DCD SVC_Handler ; -5 SVCall Handler
DCD DebugMon_Handler ; -4 Debug Monitor Handler
DCD 0 ; Reserved
DCD PendSV_Handler ; -2 PendSV Handler
DCD SysTick_Handler ; -1 SysTick Handler
; Interrupts
DCD Interrupt0_Handler ; 0 Interrupt 0
DCD Interrupt1_Handler ; 1 Interrupt 1
DCD Interrupt2_Handler ; 2 Interrupt 2
DCD Interrupt3_Handler ; 3 Interrupt 3
DCD Interrupt4_Handler ; 4 Interrupt 4
DCD Interrupt5_Handler ; 5 Interrupt 5
DCD Interrupt6_Handler ; 6 Interrupt 6
DCD Interrupt7_Handler ; 7 Interrupt 7
DCD Interrupt8_Handler ; 8 Interrupt 8
DCD Interrupt9_Handler ; 9 Interrupt 9
SPACE (214 * 4) ; Interrupts 10 .. 224 are left out
__Vectors_End
__Vectors_Size EQU __Vectors_End - __Vectors
AREA |.text|, CODE, READONLY
; Reset Handler
Reset_Handler PROC
EXPORT Reset_Handler [WEAK]
IMPORT SystemInit
IMPORT __main
LDR R0, =SystemInit
BLX R0
LDR R0, =__main
BX R0
ENDP
; Macro to define default exception/interrupt handlers.
; Default handler are weak symbols with an endless loop.
; They can be overwritten by real handlers.
MACRO
Set_Default_Handler $Handler_Name
$Handler_Name PROC
EXPORT $Handler_Name [WEAK]
B .
ENDP
MEND
; Default exception/interrupt handler
Set_Default_Handler NMI_Handler
Set_Default_Handler HardFault_Handler
Set_Default_Handler MemManage_Handler
Set_Default_Handler BusFault_Handler
Set_Default_Handler UsageFault_Handler
Set_Default_Handler SVC_Handler
Set_Default_Handler DebugMon_Handler
Set_Default_Handler PendSV_Handler
Set_Default_Handler SysTick_Handler
Set_Default_Handler Interrupt0_Handler
Set_Default_Handler Interrupt1_Handler
Set_Default_Handler Interrupt2_Handler
Set_Default_Handler Interrupt3_Handler
Set_Default_Handler Interrupt4_Handler
Set_Default_Handler Interrupt5_Handler
Set_Default_Handler Interrupt6_Handler
Set_Default_Handler Interrupt7_Handler
Set_Default_Handler Interrupt8_Handler
Set_Default_Handler Interrupt9_Handler
ALIGN
; User setup Stack & Heap
EXPORT __stack_limit
EXPORT __initial_sp
IF Heap_Size != 0 ; Heap is provided
EXPORT __heap_base
EXPORT __heap_limit
ENDIF
END
Drivers/CMSIS/DSP/Examples/ARM/arm_matrix_example/RTE/Device/ARMCM4_FP/system_ARMCM4.c
+83
View File
@@ -0,0 +1,83 @@
/**************************************************************************//**
* @file system_ARMCM4.c
* @brief CMSIS Device System Source File for
* ARMCM4 Device
* @version V5.3.1
* @date 09. July 2018
******************************************************************************/
/*
* Copyright (c) 2009-2018 Arm Limited. All rights reserved.
*
* SPDX-License-Identifier: Apache-2.0
*
* Licensed under the Apache License, Version 2.0 (the License); you may
* not use this file except in compliance with the License.
* You may obtain a copy of the License at
*
* www.apache.org/licenses/LICENSE-2.0
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an AS IS BASIS, WITHOUT
* WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
* See the License for the specific language governing permissions and
* limitations under the License.
*/
#if defined (ARMCM4)
#include "ARMCM4.h"
#elif defined (ARMCM4_FP)
#include "ARMCM4_FP.h"
#else
#error device not specified!
#endif
/*----------------------------------------------------------------------------
Define clocks
*----------------------------------------------------------------------------*/
#define XTAL (50000000UL) /* Oscillator frequency */
#define SYSTEM_CLOCK (XTAL / 2U)
/*----------------------------------------------------------------------------
Externals
*----------------------------------------------------------------------------*/
#if defined (__VTOR_PRESENT) && (__VTOR_PRESENT == 1U)
extern uint32_t __Vectors;
#endif
/*----------------------------------------------------------------------------
System Core Clock Variable
*----------------------------------------------------------------------------*/
uint32_t SystemCoreClock = SYSTEM_CLOCK; /* System Core Clock Frequency */
/*----------------------------------------------------------------------------
System Core Clock update function
*----------------------------------------------------------------------------*/
void SystemCoreClockUpdate (void)
{
SystemCoreClock = SYSTEM_CLOCK;
}
/*----------------------------------------------------------------------------
System initialization function
*----------------------------------------------------------------------------*/
void SystemInit (void)
{
#if defined (__VTOR_PRESENT) && (__VTOR_PRESENT == 1U)
SCB->VTOR = (uint32_t) &__Vectors;
#endif
#if defined (__FPU_USED) && (__FPU_USED == 1U)
SCB->CPACR |= ((3U << 10U*2U) | /* enable CP10 Full Access */
(3U << 11U*2U) ); /* enable CP11 Full Access */
#endif
#ifdef UNALIGNED_SUPPORT_DISABLE
SCB->CCR |= SCB_CCR_UNALIGN_TRP_Msk;
#endif
SystemCoreClock = SYSTEM_CLOCK;
}
Drivers/CMSIS/DSP/Examples/ARM/arm_matrix_example/RTE/Device/ARMCM7_SP/startup_ARMCM7.s
+163
View File
@@ -0,0 +1,163 @@
;/**************************************************************************//**
; * @file startup_ARMCM7.s
; * @brief CMSIS Core Device Startup File for
; * ARMCM7 Device
; * @version V5.3.1
; * @date 09. July 2018
; ******************************************************************************/
;/*
; * Copyright (c) 2009-2018 Arm Limited. All rights reserved.
; *
; * SPDX-License-Identifier: Apache-2.0
; *
; * Licensed under the Apache License, Version 2.0 (the License); you may
; * not use this file except in compliance with the License.
; * You may obtain a copy of the License at
; *
; * www.apache.org/licenses/LICENSE-2.0
; *
; * Unless required by applicable law or agreed to in writing, software
; * distributed under the License is distributed on an AS IS BASIS, WITHOUT
; * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
; * See the License for the specific language governing permissions and
; * limitations under the License.
; */
;//-------- <<< Use Configuration Wizard in Context Menu >>> ------------------
;<h> Stack Configuration
; <o> Stack Size (in Bytes) <0x0-0xFFFFFFFF:8>
;</h>
Stack_Size EQU 0x00000400
AREA STACK, NOINIT, READWRITE, ALIGN=3
__stack_limit
Stack_Mem SPACE Stack_Size
__initial_sp
;<h> Heap Configuration
; <o> Heap Size (in Bytes) <0x0-0xFFFFFFFF:8>
;</h>
Heap_Size EQU 0x00000C00
IF Heap_Size != 0 ; Heap is provided
AREA HEAP, NOINIT, READWRITE, ALIGN=3
__heap_base
Heap_Mem SPACE Heap_Size
__heap_limit
ENDIF
PRESERVE8
THUMB
; Vector Table Mapped to Address 0 at Reset
AREA RESET, DATA, READONLY
EXPORT __Vectors
EXPORT __Vectors_End
EXPORT __Vectors_Size
__Vectors DCD __initial_sp ; Top of Stack
DCD Reset_Handler ; Reset Handler
DCD NMI_Handler ; -14 NMI Handler
DCD HardFault_Handler ; -13 Hard Fault Handler
DCD MemManage_Handler ; -12 MPU Fault Handler
DCD BusFault_Handler ; -11 Bus Fault Handler
DCD UsageFault_Handler ; -10 Usage Fault Handler
DCD 0 ; Reserved
DCD 0 ; Reserved
DCD 0 ; Reserved
DCD 0 ; Reserved
DCD SVC_Handler ; -5 SVCall Handler
DCD DebugMon_Handler ; -4 Debug Monitor Handler
DCD 0 ; Reserved
DCD PendSV_Handler ; -2 PendSV Handler
DCD SysTick_Handler ; -1 SysTick Handler
; Interrupts
DCD Interrupt0_Handler ; 0 Interrupt 0
DCD Interrupt1_Handler ; 1 Interrupt 1
DCD Interrupt2_Handler ; 2 Interrupt 2
DCD Interrupt3_Handler ; 3 Interrupt 3
DCD Interrupt4_Handler ; 4 Interrupt 4
DCD Interrupt5_Handler ; 5 Interrupt 5
DCD Interrupt6_Handler ; 6 Interrupt 6
DCD Interrupt7_Handler ; 7 Interrupt 7
DCD Interrupt8_Handler ; 8 Interrupt 8
DCD Interrupt9_Handler ; 9 Interrupt 9
SPACE (214 * 4) ; Interrupts 10 .. 224 are left out
__Vectors_End
__Vectors_Size EQU __Vectors_End - __Vectors
AREA |.text|, CODE, READONLY
; Reset Handler
Reset_Handler PROC
EXPORT Reset_Handler [WEAK]
IMPORT SystemInit
IMPORT __main
LDR R0, =SystemInit
BLX R0
LDR R0, =__main
BX R0
ENDP
; Macro to define default exception/interrupt handlers.
; Default handler are weak symbols with an endless loop.
; They can be overwritten by real handlers.
MACRO
Set_Default_Handler $Handler_Name
$Handler_Name PROC
EXPORT $Handler_Name [WEAK]
B .
ENDP
MEND
; Default exception/interrupt handler
Set_Default_Handler NMI_Handler
Set_Default_Handler HardFault_Handler
Set_Default_Handler MemManage_Handler
Set_Default_Handler BusFault_Handler
Set_Default_Handler UsageFault_Handler
Set_Default_Handler SVC_Handler
Set_Default_Handler DebugMon_Handler
Set_Default_Handler PendSV_Handler
Set_Default_Handler SysTick_Handler
Set_Default_Handler Interrupt0_Handler
Set_Default_Handler Interrupt1_Handler
Set_Default_Handler Interrupt2_Handler
Set_Default_Handler Interrupt3_Handler
Set_Default_Handler Interrupt4_Handler
Set_Default_Handler Interrupt5_Handler
Set_Default_Handler Interrupt6_Handler
Set_Default_Handler Interrupt7_Handler
Set_Default_Handler Interrupt8_Handler
Set_Default_Handler Interrupt9_Handler
ALIGN
; User setup Stack & Heap
EXPORT __stack_limit
EXPORT __initial_sp
IF Heap_Size != 0 ; Heap is provided
EXPORT __heap_base
EXPORT __heap_limit
ENDIF
END
Drivers/CMSIS/DSP/Examples/ARM/arm_matrix_example/RTE/Device/ARMCM7_SP/system_ARMCM7.c
+85
View File
@@ -0,0 +1,85 @@
/**************************************************************************//**
* @file system_ARMCM7.c
* @brief CMSIS Device System Source File for
* ARMCM7 Device
* @version V5.3.1
* @date 09. July 2018
******************************************************************************/
/*
* Copyright (c) 2009-2018 Arm Limited. All rights reserved.
*
* SPDX-License-Identifier: Apache-2.0
*
* Licensed under the Apache License, Version 2.0 (the License); you may
* not use this file except in compliance with the License.
* You may obtain a copy of the License at
*
* www.apache.org/licenses/LICENSE-2.0
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an AS IS BASIS, WITHOUT
* WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
* See the License for the specific language governing permissions and
* limitations under the License.
*/
#if defined (ARMCM7)
#include "ARMCM7.h"
#elif defined (ARMCM7_SP)
#include "ARMCM7_SP.h"
#elif defined (ARMCM7_DP)
#include "ARMCM7_DP.h"
#else
#error device not specified!
#endif
/*----------------------------------------------------------------------------
Define clocks
*----------------------------------------------------------------------------*/
#define XTAL (50000000UL) /* Oscillator frequency */
#define SYSTEM_CLOCK (XTAL / 2U)
/*----------------------------------------------------------------------------
Externals
*----------------------------------------------------------------------------*/
#if defined (__VTOR_PRESENT) && (__VTOR_PRESENT == 1U)
extern uint32_t __Vectors;
#endif
/*----------------------------------------------------------------------------
System Core Clock Variable
*----------------------------------------------------------------------------*/
uint32_t SystemCoreClock = SYSTEM_CLOCK; /* System Core Clock Frequency */
/*----------------------------------------------------------------------------
System Core Clock update function
*----------------------------------------------------------------------------*/
void SystemCoreClockUpdate (void)
{
SystemCoreClock = SYSTEM_CLOCK;
}
/*----------------------------------------------------------------------------
System initialization function
*----------------------------------------------------------------------------*/
void SystemInit (void)
{
#if defined (__VTOR_PRESENT) && (__VTOR_PRESENT == 1U)
SCB->VTOR = (uint32_t) &__Vectors;
#endif
#if defined (__FPU_USED) && (__FPU_USED == 1U)
SCB->CPACR |= ((3U << 10U*2U) | /* enable CP10 Full Access */
(3U << 11U*2U) ); /* enable CP11 Full Access */
#endif
#ifdef UNALIGNED_SUPPORT_DISABLE
SCB->CCR |= SCB_CCR_UNALIGN_TRP_Msk;
#endif
SystemCoreClock = SYSTEM_CLOCK;
}
Drivers/CMSIS/DSP/Examples/ARM/arm_matrix_example/arm_matrix_example_f32.c
+233
View File
@@ -0,0 +1,233 @@
/* ----------------------------------------------------------------------
* Copyright (C) 2010-2012 ARM Limited. All rights reserved.
*
* $Date: 17. January 2013
* $Revision: V1.4.0
*
* Project: CMSIS DSP Library
* Title: arm_matrix_example_f32.c
*
* Description: Example code demonstrating least square fit to data
* using matrix functions
*
* Target Processor: Cortex-M4/Cortex-M3
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* - Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* - Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in
* the documentation and/or other materials provided with the
* distribution.
* - Neither the name of ARM LIMITED nor the names of its contributors
* may be used to endorse or promote products derived from this
* software without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
* COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
* BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
* LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
* CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
* ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
* POSSIBILITY OF SUCH DAMAGE.
* -------------------------------------------------------------------- */
/**
* @ingroup groupExamples
*/
/**
* @defgroup MatrixExample Matrix Example
*
* \par Description:
* \par
* Demonstrates the use of Matrix Transpose, Matrix Muliplication, and Matrix Inverse
* functions to apply least squares fitting to input data. Least squares fitting is
* the procedure for finding the best-fitting curve that minimizes the sum of the
* squares of the offsets (least square error) from a given set of data.
*
* \par Algorithm:
* \par
* The linear combination of parameters considered is as follows:
* \par
* <code>A * X = B</code>, where \c X is the unknown value and can be estimated
* from \c A & \c B.
* \par
* The least squares estimate \c X is given by the following equation:
* \par
* <code>X = Inverse(A<sup>T</sup> * A) * A<sup>T</sup> * B</code>
*
* \par Block Diagram:
* \par
* \image html matrixExample.gif
*
* \par Variables Description:
* \par
* \li \c A_f32 input matrix in the linear combination equation
* \li \c B_f32 output matrix in the linear combination equation
* \li \c X_f32 unknown matrix estimated using \c A_f32 & \c B_f32 matrices
*
* \par CMSIS DSP Software Library Functions Used:
* \par
* - arm_mat_init_f32()
* - arm_mat_trans_f32()
* - arm_mat_mult_f32()
* - arm_mat_inverse_f32()
*
* <b> Refer </b>
* \link arm_matrix_example_f32.c \endlink
*
*/
/** \example arm_matrix_example_f32.c
*/
#include "arm_math.h"
#include "math_helper.h"
#define SNR_THRESHOLD 90
/* --------------------------------------------------------------------------------
* Test input data(Cycles) taken from FIR Q15 module for differant cases of blockSize
* and tapSize
* --------------------------------------------------------------------------------- */
const float32_t B_f32[4] =
{
782.0, 7577.0, 470.0, 4505.0
};
/* --------------------------------------------------------------------------------
* Formula to fit is C1 + C2 * numTaps + C3 * blockSize + C4 * numTaps * blockSize
* -------------------------------------------------------------------------------- */
const float32_t A_f32[16] =
{
/* Const, numTaps, blockSize, numTaps*blockSize */
1.0, 32.0, 4.0, 128.0,
1.0, 32.0, 64.0, 2048.0,
1.0, 16.0, 4.0, 64.0,
1.0, 16.0, 64.0, 1024.0,
};
/* ----------------------------------------------------------------------
* Temporary buffers for storing intermediate values
* ------------------------------------------------------------------- */
/* Transpose of A Buffer */
float32_t AT_f32[16];
/* (Transpose of A * A) Buffer */
float32_t ATMA_f32[16];
/* Inverse(Transpose of A * A) Buffer */
float32_t ATMAI_f32[16];
/* Test Output Buffer */
float32_t X_f32[4];
/* ----------------------------------------------------------------------
* Reference ouput buffer C1, C2, C3 and C4 taken from MATLAB
* ------------------------------------------------------------------- */
const float32_t xRef_f32[4] = {73.0, 8.0, 21.25, 2.875};
float32_t snr;
/* ----------------------------------------------------------------------
* Max magnitude FFT Bin test
* ------------------------------------------------------------------- */
int32_t main(void)
{
arm_matrix_instance_f32 A; /* Matrix A Instance */
arm_matrix_instance_f32 AT; /* Matrix AT(A transpose) instance */
arm_matrix_instance_f32 ATMA; /* Matrix ATMA( AT multiply with A) instance */
arm_matrix_instance_f32 ATMAI; /* Matrix ATMAI(Inverse of ATMA) instance */
arm_matrix_instance_f32 B; /* Matrix B instance */
arm_matrix_instance_f32 X; /* Matrix X(Unknown Matrix) instance */
uint32_t srcRows, srcColumns; /* Temporary variables */
arm_status status;
/* Initialise A Matrix Instance with numRows, numCols and data array(A_f32) */
srcRows = 4;
srcColumns = 4;
arm_mat_init_f32(&A, srcRows, srcColumns, (float32_t *)A_f32);
/* Initialise Matrix Instance AT with numRows, numCols and data array(AT_f32) */
srcRows = 4;
srcColumns = 4;
arm_mat_init_f32(&AT, srcRows, srcColumns, AT_f32);
/* calculation of A transpose */
status = arm_mat_trans_f32(&A, &AT);
/* Initialise ATMA Matrix Instance with numRows, numCols and data array(ATMA_f32) */
srcRows = 4;
srcColumns = 4;
arm_mat_init_f32(&ATMA, srcRows, srcColumns, ATMA_f32);
/* calculation of AT Multiply with A */
status = arm_mat_mult_f32(&AT, &A, &ATMA);
/* Initialise ATMAI Matrix Instance with numRows, numCols and data array(ATMAI_f32) */
srcRows = 4;
srcColumns = 4;
arm_mat_init_f32(&ATMAI, srcRows, srcColumns, ATMAI_f32);
/* calculation of Inverse((Transpose(A) * A) */
status = arm_mat_inverse_f32(&ATMA, &ATMAI);
/* calculation of (Inverse((Transpose(A) * A)) * Transpose(A)) */
status = arm_mat_mult_f32(&ATMAI, &AT, &ATMA);
/* Initialise B Matrix Instance with numRows, numCols and data array(B_f32) */
srcRows = 4;
srcColumns = 1;
arm_mat_init_f32(&B, srcRows, srcColumns, (float32_t *)B_f32);
/* Initialise X Matrix Instance with numRows, numCols and data array(X_f32) */
srcRows = 4;
srcColumns = 1;
arm_mat_init_f32(&X, srcRows, srcColumns, X_f32);
/* calculation ((Inverse((Transpose(A) * A)) * Transpose(A)) * B) */
status = arm_mat_mult_f32(&ATMA, &B, &X);
/* Comparison of reference with test output */
snr = arm_snr_f32((float32_t *)xRef_f32, X_f32, 4);
/*------------------------------------------------------------------------------
* Initialise status depending on SNR calculations
*------------------------------------------------------------------------------*/
if ( snr > SNR_THRESHOLD)
{
status = ARM_MATH_SUCCESS;
}
else
{
status = ARM_MATH_TEST_FAILURE;
}
/* ----------------------------------------------------------------------
** Loop here if the signals fail the PASS check.
** This denotes a test failure
** ------------------------------------------------------------------- */
if ( status != ARM_MATH_SUCCESS)
{
while (1);
}
while (1); /* main function does not return */
}
/** \endlink */
Drivers/CMSIS/DSP/Examples/ARM/arm_matrix_example/math_helper.c
+466
View File
@@ -0,0 +1,466 @@
/* ----------------------------------------------------------------------
* Copyright (C) 2010-2012 ARM Limited. All rights reserved.
*
* $Date: 17. January 2013
* $Revision: V1.4.0 b
*
* Project: CMSIS DSP Library
*
* Title: math_helper.c
*
* Description: Definition of all helper functions required.
*
* Target Processor: Cortex-M4/Cortex-M3
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* - Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* - Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in
* the documentation and/or other materials provided with the
* distribution.
* - Neither the name of ARM LIMITED nor the names of its contributors
* may be used to endorse or promote products derived from this
* software without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
* COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
* BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
* LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
* CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
* ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
* POSSIBILITY OF SUCH DAMAGE.
* -------------------------------------------------------------------- */
/* ----------------------------------------------------------------------
* Include standard header files
* -------------------------------------------------------------------- */
#include<math.h>
/* ----------------------------------------------------------------------
* Include project header files
* -------------------------------------------------------------------- */
#include "math_helper.h"
/**
* @brief Caluclation of SNR
* @param[in] pRef Pointer to the reference buffer
* @param[in] pTest Pointer to the test buffer
* @param[in] buffSize total number of samples
* @return SNR
* The function Caluclates signal to noise ratio for the reference output
* and test output
*/
float arm_snr_f32(float *pRef, float *pTest, uint32_t buffSize)
{
float EnergySignal = 0.0, EnergyError = 0.0;
uint32_t i;
float SNR;
int temp;
int *test;
for (i = 0; i < buffSize; i++)
{
/* Checking for a NAN value in pRef array */
test = (int *)(&pRef[i]);
temp = *test;
if (temp == 0x7FC00000)
{
return(0);
}
/* Checking for a NAN value in pTest array */
test = (int *)(&pTest[i]);
temp = *test;
if (temp == 0x7FC00000)
{
return(0);
}
EnergySignal += pRef[i] * pRef[i];
EnergyError += (pRef[i] - pTest[i]) * (pRef[i] - pTest[i]);
}
/* Checking for a NAN value in EnergyError */
test = (int *)(&EnergyError);
temp = *test;
if (temp == 0x7FC00000)
{
return(0);
}
SNR = 10 * log10 (EnergySignal / EnergyError);
return (SNR);
}
/**
* @brief Provide guard bits for Input buffer
* @param[in,out] input_buf Pointer to input buffer
* @param[in] blockSize block Size
* @param[in] guard_bits guard bits
* @return none
* The function Provides the guard bits for the buffer
* to avoid overflow
*/
void arm_provide_guard_bits_q15 (q15_t * input_buf, uint32_t blockSize,
uint32_t guard_bits)
{
uint32_t i;
for (i = 0; i < blockSize; i++)
{
input_buf[i] = input_buf[i] >> guard_bits;
}
}
/**
* @brief Converts float to fixed in q12.20 format
* @param[in] pIn pointer to input buffer
* @param[out] pOut pointer to outputbuffer
* @param[in] numSamples number of samples in the input buffer
* @return none
* The function converts floating point values to fixed point(q12.20) values
*/
void arm_float_to_q12_20(float *pIn, q31_t * pOut, uint32_t numSamples)
{
uint32_t i;
for (i = 0; i < numSamples; i++)
{
/* 1048576.0f corresponds to pow(2, 20) */
pOut[i] = (q31_t) (pIn[i] * 1048576.0f);
pOut[i] += pIn[i] > 0 ? 0.5 : -0.5;
if (pIn[i] == (float) 1.0)
{
pOut[i] = 0x000FFFFF;
}
}
}
/**
* @brief Compare MATLAB Reference Output and ARM Test output
* @param[in] pIn Pointer to Ref buffer
* @param[in] pOut Pointer to Test buffer
* @param[in] numSamples number of samples in the buffer
* @return maximum difference
*/
uint32_t arm_compare_fixed_q15(q15_t *pIn, q15_t *pOut, uint32_t numSamples)
{
uint32_t i;
int32_t diff, diffCrnt = 0;
uint32_t maxDiff = 0;
for (i = 0; i < numSamples; i++)
{
diff = pIn[i] - pOut[i];
diffCrnt = (diff > 0) ? diff : -diff;
if (diffCrnt > maxDiff)
{
maxDiff = diffCrnt;
}
}
return(maxDiff);
}
/**
* @brief Compare MATLAB Reference Output and ARM Test output
* @param[in] pIn Pointer to Ref buffer
* @param[in] pOut Pointer to Test buffer
* @param[in] numSamples number of samples in the buffer
* @return maximum difference
*/
uint32_t arm_compare_fixed_q31(q31_t *pIn, q31_t * pOut, uint32_t numSamples)
{
uint32_t i;
int32_t diff, diffCrnt = 0;
uint32_t maxDiff = 0;
for (i = 0; i < numSamples; i++)
{
diff = pIn[i] - pOut[i];
diffCrnt = (diff > 0) ? diff : -diff;
if (diffCrnt > maxDiff)
{
maxDiff = diffCrnt;
}
}
return(maxDiff);
}
/**
* @brief Provide guard bits for Input buffer
* @param[in,out] input_buf Pointer to input buffer
* @param[in] blockSize block Size
* @param[in] guard_bits guard bits
* @return none
* The function Provides the guard bits for the buffer
* to avoid overflow
*/
void arm_provide_guard_bits_q31 (q31_t * input_buf,
uint32_t blockSize,
uint32_t guard_bits)
{
uint32_t i;
for (i = 0; i < blockSize; i++)
{
input_buf[i] = input_buf[i] >> guard_bits;
}
}
/**
* @brief Provide guard bits for Input buffer
* @param[in,out] input_buf Pointer to input buffer
* @param[in] blockSize block Size
* @param[in] guard_bits guard bits
* @return none
* The function Provides the guard bits for the buffer
* to avoid overflow
*/
void arm_provide_guard_bits_q7 (q7_t * input_buf,
uint32_t blockSize,
uint32_t guard_bits)
{
uint32_t i;
for (i = 0; i < blockSize; i++)
{
input_buf[i] = input_buf[i] >> guard_bits;
}
}
/**
* @brief Caluclates number of guard bits
* @param[in] num_adds number of additions
* @return guard bits
* The function Caluclates the number of guard bits
* depending on the numtaps
*/
uint32_t arm_calc_guard_bits (uint32_t num_adds)
{
uint32_t i = 1, j = 0;
if (num_adds == 1)
{
return (0);
}
while (i < num_adds)
{
i = i * 2;
j++;
}
return (j);
}
/**
* @brief Apply guard bits to buffer
* @param[in,out] pIn pointer to input buffer
* @param[in] numSamples number of samples in the input buffer
* @param[in] guard_bits guard bits
* @return none
*/
void arm_apply_guard_bits (float32_t *pIn,
uint32_t numSamples,
uint32_t guard_bits)
{
uint32_t i;
for (i = 0; i < numSamples; i++)
{
pIn[i] = pIn[i] * arm_calc_2pow(guard_bits);
}
}
/**
* @brief Calculates pow(2, numShifts)
* @param[in] numShifts number of shifts
* @return pow(2, numShifts)
*/
uint32_t arm_calc_2pow(uint32_t numShifts)
{
uint32_t i, val = 1;
for (i = 0; i < numShifts; i++)
{
val = val * 2;
}
return(val);
}
/**
* @brief Converts float to fixed q14
* @param[in] pIn pointer to input buffer
* @param[out] pOut pointer to output buffer
* @param[in] numSamples number of samples in the buffer
* @return none
* The function converts floating point values to fixed point values
*/
void arm_float_to_q14 (float *pIn, q15_t *pOut, uint32_t numSamples)
{
uint32_t i;
for (i = 0; i < numSamples; i++)
{
/* 16384.0f corresponds to pow(2, 14) */
pOut[i] = (q15_t) (pIn[i] * 16384.0f);
pOut[i] += pIn[i] > 0 ? 0.5 : -0.5;
if (pIn[i] == (float) 2.0)
{
pOut[i] = 0x7FFF;
}
}
}
/**
* @brief Converts float to fixed q30 format
* @param[in] pIn pointer to input buffer
* @param[out] pOut pointer to output buffer
* @param[in] numSamples number of samples in the buffer
* @return none
* The function converts floating point values to fixed point values
*/
void arm_float_to_q30 (float *pIn, q31_t * pOut, uint32_t numSamples)
{
uint32_t i;
for (i = 0; i < numSamples; i++)
{
/* 1073741824.0f corresponds to pow(2, 30) */
pOut[i] = (q31_t) (pIn[i] * 1073741824.0f);
pOut[i] += pIn[i] > 0 ? 0.5 : -0.5;
if (pIn[i] == (float) 2.0)
{
pOut[i] = 0x7FFFFFFF;
}
}
}
/**
* @brief Converts float to fixed q30 format
* @param[in] pIn pointer to input buffer
* @param[out] pOut pointer to output buffer
* @param[in] numSamples number of samples in the buffer
* @return none
* The function converts floating point values to fixed point values
*/
void arm_float_to_q29 (float *pIn, q31_t *pOut, uint32_t numSamples)
{
uint32_t i;
for (i = 0; i < numSamples; i++)
{
/* 1073741824.0f corresponds to pow(2, 30) */
pOut[i] = (q31_t) (pIn[i] * 536870912.0f);
pOut[i] += pIn[i] > 0 ? 0.5 : -0.5;
if (pIn[i] == (float) 4.0)
{
pOut[i] = 0x7FFFFFFF;
}
}
}
/**
* @brief Converts float to fixed q28 format
* @param[in] pIn pointer to input buffer
* @param[out] pOut pointer to output buffer
* @param[in] numSamples number of samples in the buffer
* @return none
* The function converts floating point values to fixed point values
*/
void arm_float_to_q28 (float *pIn, q31_t *pOut, uint32_t numSamples)
{
uint32_t i;
for (i = 0; i < numSamples; i++)
{
/* 268435456.0f corresponds to pow(2, 28) */
pOut[i] = (q31_t) (pIn[i] * 268435456.0f);
pOut[i] += pIn[i] > 0 ? 0.5 : -0.5;
if (pIn[i] == (float) 8.0)
{
pOut[i] = 0x7FFFFFFF;
}
}
}
/**
* @brief Clip the float values to +/- 1
* @param[in,out] pIn input buffer
* @param[in] numSamples number of samples in the buffer
* @return none
* The function converts floating point values to fixed point values
*/
void arm_clip_f32 (float *pIn, uint32_t numSamples)
{
uint32_t i;
for (i = 0; i < numSamples; i++)
{
if (pIn[i] > 1.0f)
{
pIn[i] = 1.0;
}
else if ( pIn[i] < -1.0f)
{
pIn[i] = -1.0;
}
}
}
Drivers/CMSIS/DSP/Examples/ARM/arm_matrix_example/math_helper.h
+63
View File
@@ -0,0 +1,63 @@
/* ----------------------------------------------------------------------
* Copyright (C) 2010-2013 ARM Limited. All rights reserved.
*
* $Date: 17. January 2013
* $Revision: V1.4.0
*
* Project: CMSIS DSP Library
*
* Title: math_helper.h
*
* Description: Prototypes of all helper functions required.
*
* Target Processor: Cortex-M4/Cortex-M3
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* - Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* - Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in
* the documentation and/or other materials provided with the
* distribution.
* - Neither the name of ARM LIMITED nor the names of its contributors
* may be used to endorse or promote products derived from this
* software without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
* COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
* BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
* LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
* CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
* ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
* POSSIBILITY OF SUCH DAMAGE.
* -------------------------------------------------------------------- */
#include "arm_math.h"
#ifndef MATH_HELPER_H
#define MATH_HELPER_H
float arm_snr_f32(float *pRef, float *pTest, uint32_t buffSize);
void arm_float_to_q12_20(float *pIn, q31_t * pOut, uint32_t numSamples);
void arm_provide_guard_bits_q15(q15_t *input_buf, uint32_t blockSize, uint32_t guard_bits);
void arm_provide_guard_bits_q31(q31_t *input_buf, uint32_t blockSize, uint32_t guard_bits);
void arm_float_to_q14(float *pIn, q15_t *pOut, uint32_t numSamples);
void arm_float_to_q29(float *pIn, q31_t *pOut, uint32_t numSamples);
void arm_float_to_q28(float *pIn, q31_t *pOut, uint32_t numSamples);
void arm_float_to_q30(float *pIn, q31_t *pOut, uint32_t numSamples);
void arm_clip_f32(float *pIn, uint32_t numSamples);
uint32_t arm_calc_guard_bits(uint32_t num_adds);
void arm_apply_guard_bits (float32_t * pIn, uint32_t numSamples, uint32_t guard_bits);
uint32_t arm_compare_fixed_q15(q15_t *pIn, q15_t * pOut, uint32_t numSamples);
uint32_t arm_compare_fixed_q31(q31_t *pIn, q31_t *pOut, uint32_t numSamples);
uint32_t arm_calc_2pow(uint32_t guard_bits);
#endif