pima/Trinity-DevPCB-V1.0
1
0
Fork 0
Code Issues Pull Requests Actions Packages Projects Releases Wiki Activity

Trinity Devboard PCB V1.0 Firmware. FreeRTOS is setup and the MCU reads IMU data over SPI fand Magnetometer data over I2C, each with a seperate task. Sensordata is then run though MadgwickAHRS and send over USB as serial packet data to use in trinity visualizer. Bare minimum functionality works and is replicated from the first prototype.

Browse Source
This commit is contained in:
pima
2026-09-13 19:51:03 +02:00
commit 7ee381de58
1630 changed files with 632404 additions and 0 deletions
Download Patch File Download Diff File Expand all files Collapse all files
Drivers/CMSIS/DSP/Examples/ARM/arm_fir_example/Abstract.txt
+4
View File
@@ -0,0 +1,4 @@
CMSIS DSP_Lib example arm_fir_example for
Cortex-M0, Cortex-M3, Cortex-M4 with FPU and Cortex-M7 with single precision FPU.
The example is configured for uVision Simulator.
Drivers/CMSIS/DSP/Examples/ARM/arm_fir_example/RTE/Device/ARMCM0/startup_ARMCM0.s
+159
View File
@@ -0,0 +1,159 @@
;/**************************************************************************//**
; * @file startup_ARMCM0.s
; * @brief CMSIS Core Device Startup File for
; * ARMCM0 Device
; * @version V5.3.1
; * @date 09. July 2018
; ******************************************************************************/
;/*
; * Copyright (c) 2009-2018 Arm Limited. All rights reserved.
; *
; * SPDX-License-Identifier: Apache-2.0
; *
; * Licensed under the Apache License, Version 2.0 (the License); you may
; * not use this file except in compliance with the License.
; * You may obtain a copy of the License at
; *
; * www.apache.org/licenses/LICENSE-2.0
; *
; * Unless required by applicable law or agreed to in writing, software
; * distributed under the License is distributed on an AS IS BASIS, WITHOUT
; * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
; * See the License for the specific language governing permissions and
; * limitations under the License.
; */
;//-------- <<< Use Configuration Wizard in Context Menu >>> ------------------
;<h> Stack Configuration
; <o> Stack Size (in Bytes) <0x0-0xFFFFFFFF:8>
;</h>
Stack_Size EQU 0x00000400
AREA STACK, NOINIT, READWRITE, ALIGN=3
__stack_limit
Stack_Mem SPACE Stack_Size
__initial_sp
;<h> Heap Configuration
; <o> Heap Size (in Bytes) <0x0-0xFFFFFFFF:8>
;</h>
Heap_Size EQU 0x00000C00
IF Heap_Size != 0 ; Heap is provided
AREA HEAP, NOINIT, READWRITE, ALIGN=3
__heap_base
Heap_Mem SPACE Heap_Size
__heap_limit
ENDIF
PRESERVE8
THUMB
; Vector Table Mapped to Address 0 at Reset
AREA RESET, DATA, READONLY
EXPORT __Vectors
EXPORT __Vectors_End
EXPORT __Vectors_Size
__Vectors DCD __initial_sp ; Top of Stack
DCD Reset_Handler ; Reset Handler
DCD NMI_Handler ; -14 NMI Handler
DCD HardFault_Handler ; -13 Hard Fault Handler
DCD 0 ; Reserved
DCD 0 ; Reserved
DCD 0 ; Reserved
DCD 0 ; Reserved
DCD 0 ; Reserved
DCD 0 ; Reserved
DCD 0 ; Reserved
DCD SVC_Handler ; -5 SVCall Handler
DCD 0 ; Reserved
DCD 0 ; Reserved
DCD PendSV_Handler ; -2 PendSV Handler
DCD SysTick_Handler ; -1 SysTick Handler
; Interrupts
DCD Interrupt0_Handler ; 0 Interrupt 0
DCD Interrupt1_Handler ; 1 Interrupt 1
DCD Interrupt2_Handler ; 2 Interrupt 2
DCD Interrupt3_Handler ; 3 Interrupt 3
DCD Interrupt4_Handler ; 4 Interrupt 4
DCD Interrupt5_Handler ; 5 Interrupt 5
DCD Interrupt6_Handler ; 6 Interrupt 6
DCD Interrupt7_Handler ; 7 Interrupt 7
DCD Interrupt8_Handler ; 8 Interrupt 8
DCD Interrupt9_Handler ; 9 Interrupt 9
SPACE ( 22 * 4) ; Interrupts 10 .. 31 are left out
__Vectors_End
__Vectors_Size EQU __Vectors_End - __Vectors
AREA |.text|, CODE, READONLY
; Reset Handler
Reset_Handler PROC
EXPORT Reset_Handler [WEAK]
IMPORT SystemInit
IMPORT __main
LDR R0, =SystemInit
BLX R0
LDR R0, =__main
BX R0
ENDP
; Macro to define default exception/interrupt handlers.
; Default handler are weak symbols with an endless loop.
; They can be overwritten by real handlers.
MACRO
Set_Default_Handler $Handler_Name
$Handler_Name PROC
EXPORT $Handler_Name [WEAK]
B .
ENDP
MEND
; Default exception/interrupt handler
Set_Default_Handler NMI_Handler
Set_Default_Handler HardFault_Handler
Set_Default_Handler SVC_Handler
Set_Default_Handler PendSV_Handler
Set_Default_Handler SysTick_Handler
Set_Default_Handler Interrupt0_Handler
Set_Default_Handler Interrupt1_Handler
Set_Default_Handler Interrupt2_Handler
Set_Default_Handler Interrupt3_Handler
Set_Default_Handler Interrupt4_Handler
Set_Default_Handler Interrupt5_Handler
Set_Default_Handler Interrupt6_Handler
Set_Default_Handler Interrupt7_Handler
Set_Default_Handler Interrupt8_Handler
Set_Default_Handler Interrupt9_Handler
ALIGN
; User setup Stack & Heap
EXPORT __stack_limit
EXPORT __initial_sp
IF Heap_Size != 0 ; Heap is provided
EXPORT __heap_base
EXPORT __heap_limit
ENDIF
END
Drivers/CMSIS/DSP/Examples/ARM/arm_fir_example/RTE/Device/ARMCM0/system_ARMCM0.c
+56
View File
@@ -0,0 +1,56 @@
/**************************************************************************//**
* @file system_ARMCM0.c
* @brief CMSIS Device System Source File for
* ARMCM0 Device
* @version V5.3.1
* @date 09. July 2018
******************************************************************************/
/*
* Copyright (c) 2009-2018 Arm Limited. All rights reserved.
*
* SPDX-License-Identifier: Apache-2.0
*
* Licensed under the Apache License, Version 2.0 (the License); you may
* not use this file except in compliance with the License.
* You may obtain a copy of the License at
*
* www.apache.org/licenses/LICENSE-2.0
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an AS IS BASIS, WITHOUT
* WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
* See the License for the specific language governing permissions and
* limitations under the License.
*/
#include "ARMCM0.h"
/*----------------------------------------------------------------------------
Define clocks
*----------------------------------------------------------------------------*/
#define XTAL (50000000UL) /* Oscillator frequency */
#define SYSTEM_CLOCK (XTAL / 2U)
/*----------------------------------------------------------------------------
System Core Clock Variable
*----------------------------------------------------------------------------*/
uint32_t SystemCoreClock = SYSTEM_CLOCK; /* System Core Clock Frequency */
/*----------------------------------------------------------------------------
System Core Clock update function
*----------------------------------------------------------------------------*/
void SystemCoreClockUpdate (void)
{
SystemCoreClock = SYSTEM_CLOCK;
}
/*----------------------------------------------------------------------------
System initialization function
*----------------------------------------------------------------------------*/
void SystemInit (void)
{
SystemCoreClock = SYSTEM_CLOCK;
}
Drivers/CMSIS/DSP/Examples/ARM/arm_fir_example/RTE/Device/ARMCM3/startup_ARMCM3.s
+163
View File
@@ -0,0 +1,163 @@
;/**************************************************************************//**
; * @file startup_ARMCM3.s
; * @brief CMSIS Core Device Startup File for
; * ARMCM3 Device
; * @version V5.3.1
; * @date 09. July 2018
; ******************************************************************************/
;/*
; * Copyright (c) 2009-2018 Arm Limited. All rights reserved.
; *
; * SPDX-License-Identifier: Apache-2.0
; *
; * Licensed under the Apache License, Version 2.0 (the License); you may
; * not use this file except in compliance with the License.
; * You may obtain a copy of the License at
; *
; * www.apache.org/licenses/LICENSE-2.0
; *
; * Unless required by applicable law or agreed to in writing, software
; * distributed under the License is distributed on an AS IS BASIS, WITHOUT
; * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
; * See the License for the specific language governing permissions and
; * limitations under the License.
; */
;//-------- <<< Use Configuration Wizard in Context Menu >>> ------------------
;<h> Stack Configuration
; <o> Stack Size (in Bytes) <0x0-0xFFFFFFFF:8>
;</h>
Stack_Size EQU 0x00000400
AREA STACK, NOINIT, READWRITE, ALIGN=3
__stack_limit
Stack_Mem SPACE Stack_Size
__initial_sp
;<h> Heap Configuration
; <o> Heap Size (in Bytes) <0x0-0xFFFFFFFF:8>
;</h>
Heap_Size EQU 0x00000C00
IF Heap_Size != 0 ; Heap is provided
AREA HEAP, NOINIT, READWRITE, ALIGN=3
__heap_base
Heap_Mem SPACE Heap_Size
__heap_limit
ENDIF
PRESERVE8
THUMB
; Vector Table Mapped to Address 0 at Reset
AREA RESET, DATA, READONLY
EXPORT __Vectors
EXPORT __Vectors_End
EXPORT __Vectors_Size
__Vectors DCD __initial_sp ; Top of Stack
DCD Reset_Handler ; Reset Handler
DCD NMI_Handler ; -14 NMI Handler
DCD HardFault_Handler ; -13 Hard Fault Handler
DCD MemManage_Handler ; -12 MPU Fault Handler
DCD BusFault_Handler ; -11 Bus Fault Handler
DCD UsageFault_Handler ; -10 Usage Fault Handler
DCD 0 ; Reserved
DCD 0 ; Reserved
DCD 0 ; Reserved
DCD 0 ; Reserved
DCD SVC_Handler ; -5 SVCall Handler
DCD DebugMon_Handler ; -4 Debug Monitor Handler
DCD 0 ; Reserved
DCD PendSV_Handler ; -2 PendSV Handler
DCD SysTick_Handler ; -1 SysTick Handler
; Interrupts
DCD Interrupt0_Handler ; 0 Interrupt 0
DCD Interrupt1_Handler ; 1 Interrupt 1
DCD Interrupt2_Handler ; 2 Interrupt 2
DCD Interrupt3_Handler ; 3 Interrupt 3
DCD Interrupt4_Handler ; 4 Interrupt 4
DCD Interrupt5_Handler ; 5 Interrupt 5
DCD Interrupt6_Handler ; 6 Interrupt 6
DCD Interrupt7_Handler ; 7 Interrupt 7
DCD Interrupt8_Handler ; 8 Interrupt 8
DCD Interrupt9_Handler ; 9 Interrupt 9
SPACE (214 * 4) ; Interrupts 10 .. 224 are left out
__Vectors_End
__Vectors_Size EQU __Vectors_End - __Vectors
AREA |.text|, CODE, READONLY
; Reset Handler
Reset_Handler PROC
EXPORT Reset_Handler [WEAK]
IMPORT SystemInit
IMPORT __main
LDR R0, =SystemInit
BLX R0
LDR R0, =__main
BX R0
ENDP
; Macro to define default exception/interrupt handlers.
; Default handler are weak symbols with an endless loop.
; They can be overwritten by real handlers.
MACRO
Set_Default_Handler $Handler_Name
$Handler_Name PROC
EXPORT $Handler_Name [WEAK]
B .
ENDP
MEND
; Default exception/interrupt handler
Set_Default_Handler NMI_Handler
Set_Default_Handler HardFault_Handler
Set_Default_Handler MemManage_Handler
Set_Default_Handler BusFault_Handler
Set_Default_Handler UsageFault_Handler
Set_Default_Handler SVC_Handler
Set_Default_Handler DebugMon_Handler
Set_Default_Handler PendSV_Handler
Set_Default_Handler SysTick_Handler
Set_Default_Handler Interrupt0_Handler
Set_Default_Handler Interrupt1_Handler
Set_Default_Handler Interrupt2_Handler
Set_Default_Handler Interrupt3_Handler
Set_Default_Handler Interrupt4_Handler
Set_Default_Handler Interrupt5_Handler
Set_Default_Handler Interrupt6_Handler
Set_Default_Handler Interrupt7_Handler
Set_Default_Handler Interrupt8_Handler
Set_Default_Handler Interrupt9_Handler
ALIGN
; User setup Stack & Heap
EXPORT __stack_limit
EXPORT __initial_sp
IF Heap_Size != 0 ; Heap is provided
EXPORT __heap_base
EXPORT __heap_limit
ENDIF
END
Drivers/CMSIS/DSP/Examples/ARM/arm_fir_example/RTE/Device/ARMCM3/system_ARMCM3.c
+68
View File
@@ -0,0 +1,68 @@
/**************************************************************************//**
* @file system_ARMCM3.c
* @brief CMSIS Device System Source File for
* ARMCM3 Device
* @version V5.3.1
* @date 09. July 2018
******************************************************************************/
/*
* Copyright (c) 2009-2018 Arm Limited. All rights reserved.
*
* SPDX-License-Identifier: Apache-2.0
*
* Licensed under the Apache License, Version 2.0 (the License); you may
* not use this file except in compliance with the License.
* You may obtain a copy of the License at
*
* www.apache.org/licenses/LICENSE-2.0
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an AS IS BASIS, WITHOUT
* WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
* See the License for the specific language governing permissions and
* limitations under the License.
*/
#include "ARMCM3.h"
/*----------------------------------------------------------------------------
Define clocks
*----------------------------------------------------------------------------*/
#define XTAL (50000000UL) /* Oscillator frequency */
#define SYSTEM_CLOCK (XTAL / 2U)
/*----------------------------------------------------------------------------
Externals
*----------------------------------------------------------------------------*/
#if defined (__VTOR_PRESENT) && (__VTOR_PRESENT == 1U)
extern uint32_t __Vectors;
#endif
/*----------------------------------------------------------------------------
System Core Clock Variable
*----------------------------------------------------------------------------*/
uint32_t SystemCoreClock = SYSTEM_CLOCK; /* System Core Clock Frequency */
/*----------------------------------------------------------------------------
System Core Clock update function
*----------------------------------------------------------------------------*/
void SystemCoreClockUpdate (void)
{
SystemCoreClock = SYSTEM_CLOCK;
}
/*----------------------------------------------------------------------------
System initialization function
*----------------------------------------------------------------------------*/
void SystemInit (void)
{
#if defined (__VTOR_PRESENT) && (__VTOR_PRESENT == 1U)
SCB->VTOR = (uint32_t) &__Vectors;
#endif
SystemCoreClock = SYSTEM_CLOCK;
}
Drivers/CMSIS/DSP/Examples/ARM/arm_fir_example/RTE/Device/ARMCM4_FP/startup_ARMCM4.s
+163
View File
@@ -0,0 +1,163 @@
;/**************************************************************************//**
; * @file startup_ARMCM4.s
; * @brief CMSIS Core Device Startup File for
; * ARMCM4 Device
; * @version V5.3.1
; * @date 09. July 2018
; ******************************************************************************/
;/*
; * Copyright (c) 2009-2018 Arm Limited. All rights reserved.
; *
; * SPDX-License-Identifier: Apache-2.0
; *
; * Licensed under the Apache License, Version 2.0 (the License); you may
; * not use this file except in compliance with the License.
; * You may obtain a copy of the License at
; *
; * www.apache.org/licenses/LICENSE-2.0
; *
; * Unless required by applicable law or agreed to in writing, software
; * distributed under the License is distributed on an AS IS BASIS, WITHOUT
; * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
; * See the License for the specific language governing permissions and
; * limitations under the License.
; */
;//-------- <<< Use Configuration Wizard in Context Menu >>> ------------------
;<h> Stack Configuration
; <o> Stack Size (in Bytes) <0x0-0xFFFFFFFF:8>
;</h>
Stack_Size EQU 0x00000400
AREA STACK, NOINIT, READWRITE, ALIGN=3
__stack_limit
Stack_Mem SPACE Stack_Size
__initial_sp
;<h> Heap Configuration
; <o> Heap Size (in Bytes) <0x0-0xFFFFFFFF:8>
;</h>
Heap_Size EQU 0x00000C00
IF Heap_Size != 0 ; Heap is provided
AREA HEAP, NOINIT, READWRITE, ALIGN=3
__heap_base
Heap_Mem SPACE Heap_Size
__heap_limit
ENDIF
PRESERVE8
THUMB
; Vector Table Mapped to Address 0 at Reset
AREA RESET, DATA, READONLY
EXPORT __Vectors
EXPORT __Vectors_End
EXPORT __Vectors_Size
__Vectors DCD __initial_sp ; Top of Stack
DCD Reset_Handler ; Reset Handler
DCD NMI_Handler ; -14 NMI Handler
DCD HardFault_Handler ; -13 Hard Fault Handler
DCD MemManage_Handler ; -12 MPU Fault Handler
DCD BusFault_Handler ; -11 Bus Fault Handler
DCD UsageFault_Handler ; -10 Usage Fault Handler
DCD 0 ; Reserved
DCD 0 ; Reserved
DCD 0 ; Reserved
DCD 0 ; Reserved
DCD SVC_Handler ; -5 SVCall Handler
DCD DebugMon_Handler ; -4 Debug Monitor Handler
DCD 0 ; Reserved
DCD PendSV_Handler ; -2 PendSV Handler
DCD SysTick_Handler ; -1 SysTick Handler
; Interrupts
DCD Interrupt0_Handler ; 0 Interrupt 0
DCD Interrupt1_Handler ; 1 Interrupt 1
DCD Interrupt2_Handler ; 2 Interrupt 2
DCD Interrupt3_Handler ; 3 Interrupt 3
DCD Interrupt4_Handler ; 4 Interrupt 4
DCD Interrupt5_Handler ; 5 Interrupt 5
DCD Interrupt6_Handler ; 6 Interrupt 6
DCD Interrupt7_Handler ; 7 Interrupt 7
DCD Interrupt8_Handler ; 8 Interrupt 8
DCD Interrupt9_Handler ; 9 Interrupt 9
SPACE (214 * 4) ; Interrupts 10 .. 224 are left out
__Vectors_End
__Vectors_Size EQU __Vectors_End - __Vectors
AREA |.text|, CODE, READONLY
; Reset Handler
Reset_Handler PROC
EXPORT Reset_Handler [WEAK]
IMPORT SystemInit
IMPORT __main
LDR R0, =SystemInit
BLX R0
LDR R0, =__main
BX R0
ENDP
; Macro to define default exception/interrupt handlers.
; Default handler are weak symbols with an endless loop.
; They can be overwritten by real handlers.
MACRO
Set_Default_Handler $Handler_Name
$Handler_Name PROC
EXPORT $Handler_Name [WEAK]
B .
ENDP
MEND
; Default exception/interrupt handler
Set_Default_Handler NMI_Handler
Set_Default_Handler HardFault_Handler
Set_Default_Handler MemManage_Handler
Set_Default_Handler BusFault_Handler
Set_Default_Handler UsageFault_Handler
Set_Default_Handler SVC_Handler
Set_Default_Handler DebugMon_Handler
Set_Default_Handler PendSV_Handler
Set_Default_Handler SysTick_Handler
Set_Default_Handler Interrupt0_Handler
Set_Default_Handler Interrupt1_Handler
Set_Default_Handler Interrupt2_Handler
Set_Default_Handler Interrupt3_Handler
Set_Default_Handler Interrupt4_Handler
Set_Default_Handler Interrupt5_Handler
Set_Default_Handler Interrupt6_Handler
Set_Default_Handler Interrupt7_Handler
Set_Default_Handler Interrupt8_Handler
Set_Default_Handler Interrupt9_Handler
ALIGN
; User setup Stack & Heap
EXPORT __stack_limit
EXPORT __initial_sp
IF Heap_Size != 0 ; Heap is provided
EXPORT __heap_base
EXPORT __heap_limit
ENDIF
END
Drivers/CMSIS/DSP/Examples/ARM/arm_fir_example/RTE/Device/ARMCM4_FP/system_ARMCM4.c
+83
View File
@@ -0,0 +1,83 @@
/**************************************************************************//**
* @file system_ARMCM4.c
* @brief CMSIS Device System Source File for
* ARMCM4 Device
* @version V5.3.1
* @date 09. July 2018
******************************************************************************/
/*
* Copyright (c) 2009-2018 Arm Limited. All rights reserved.
*
* SPDX-License-Identifier: Apache-2.0
*
* Licensed under the Apache License, Version 2.0 (the License); you may
* not use this file except in compliance with the License.
* You may obtain a copy of the License at
*
* www.apache.org/licenses/LICENSE-2.0
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an AS IS BASIS, WITHOUT
* WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
* See the License for the specific language governing permissions and
* limitations under the License.
*/
#if defined (ARMCM4)
#include "ARMCM4.h"
#elif defined (ARMCM4_FP)
#include "ARMCM4_FP.h"
#else
#error device not specified!
#endif
/*----------------------------------------------------------------------------
Define clocks
*----------------------------------------------------------------------------*/
#define XTAL (50000000UL) /* Oscillator frequency */
#define SYSTEM_CLOCK (XTAL / 2U)
/*----------------------------------------------------------------------------
Externals
*----------------------------------------------------------------------------*/
#if defined (__VTOR_PRESENT) && (__VTOR_PRESENT == 1U)
extern uint32_t __Vectors;
#endif
/*----------------------------------------------------------------------------
System Core Clock Variable
*----------------------------------------------------------------------------*/
uint32_t SystemCoreClock = SYSTEM_CLOCK; /* System Core Clock Frequency */
/*----------------------------------------------------------------------------
System Core Clock update function
*----------------------------------------------------------------------------*/
void SystemCoreClockUpdate (void)
{
SystemCoreClock = SYSTEM_CLOCK;
}
/*----------------------------------------------------------------------------
System initialization function
*----------------------------------------------------------------------------*/
void SystemInit (void)
{
#if defined (__VTOR_PRESENT) && (__VTOR_PRESENT == 1U)
SCB->VTOR = (uint32_t) &__Vectors;
#endif
#if defined (__FPU_USED) && (__FPU_USED == 1U)
SCB->CPACR |= ((3U << 10U*2U) | /* enable CP10 Full Access */
(3U << 11U*2U) ); /* enable CP11 Full Access */
#endif
#ifdef UNALIGNED_SUPPORT_DISABLE
SCB->CCR |= SCB_CCR_UNALIGN_TRP_Msk;
#endif
SystemCoreClock = SYSTEM_CLOCK;
}
Drivers/CMSIS/DSP/Examples/ARM/arm_fir_example/RTE/Device/ARMCM7_SP/startup_ARMCM7.s
+163
View File
@@ -0,0 +1,163 @@
;/**************************************************************************//**
; * @file startup_ARMCM7.s
; * @brief CMSIS Core Device Startup File for
; * ARMCM7 Device
; * @version V5.3.1
; * @date 09. July 2018
; ******************************************************************************/
;/*
; * Copyright (c) 2009-2018 Arm Limited. All rights reserved.
; *
; * SPDX-License-Identifier: Apache-2.0
; *
; * Licensed under the Apache License, Version 2.0 (the License); you may
; * not use this file except in compliance with the License.
; * You may obtain a copy of the License at
; *
; * www.apache.org/licenses/LICENSE-2.0
; *
; * Unless required by applicable law or agreed to in writing, software
; * distributed under the License is distributed on an AS IS BASIS, WITHOUT
; * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
; * See the License for the specific language governing permissions and
; * limitations under the License.
; */
;//-------- <<< Use Configuration Wizard in Context Menu >>> ------------------
;<h> Stack Configuration
; <o> Stack Size (in Bytes) <0x0-0xFFFFFFFF:8>
;</h>
Stack_Size EQU 0x00000400
AREA STACK, NOINIT, READWRITE, ALIGN=3
__stack_limit
Stack_Mem SPACE Stack_Size
__initial_sp
;<h> Heap Configuration
; <o> Heap Size (in Bytes) <0x0-0xFFFFFFFF:8>
;</h>
Heap_Size EQU 0x00000C00
IF Heap_Size != 0 ; Heap is provided
AREA HEAP, NOINIT, READWRITE, ALIGN=3
__heap_base
Heap_Mem SPACE Heap_Size
__heap_limit
ENDIF
PRESERVE8
THUMB
; Vector Table Mapped to Address 0 at Reset
AREA RESET, DATA, READONLY
EXPORT __Vectors
EXPORT __Vectors_End
EXPORT __Vectors_Size
__Vectors DCD __initial_sp ; Top of Stack
DCD Reset_Handler ; Reset Handler
DCD NMI_Handler ; -14 NMI Handler
DCD HardFault_Handler ; -13 Hard Fault Handler
DCD MemManage_Handler ; -12 MPU Fault Handler
DCD BusFault_Handler ; -11 Bus Fault Handler
DCD UsageFault_Handler ; -10 Usage Fault Handler
DCD 0 ; Reserved
DCD 0 ; Reserved
DCD 0 ; Reserved
DCD 0 ; Reserved
DCD SVC_Handler ; -5 SVCall Handler
DCD DebugMon_Handler ; -4 Debug Monitor Handler
DCD 0 ; Reserved
DCD PendSV_Handler ; -2 PendSV Handler
DCD SysTick_Handler ; -1 SysTick Handler
; Interrupts
DCD Interrupt0_Handler ; 0 Interrupt 0
DCD Interrupt1_Handler ; 1 Interrupt 1
DCD Interrupt2_Handler ; 2 Interrupt 2
DCD Interrupt3_Handler ; 3 Interrupt 3
DCD Interrupt4_Handler ; 4 Interrupt 4
DCD Interrupt5_Handler ; 5 Interrupt 5
DCD Interrupt6_Handler ; 6 Interrupt 6
DCD Interrupt7_Handler ; 7 Interrupt 7
DCD Interrupt8_Handler ; 8 Interrupt 8
DCD Interrupt9_Handler ; 9 Interrupt 9
SPACE (214 * 4) ; Interrupts 10 .. 224 are left out
__Vectors_End
__Vectors_Size EQU __Vectors_End - __Vectors
AREA |.text|, CODE, READONLY
; Reset Handler
Reset_Handler PROC
EXPORT Reset_Handler [WEAK]
IMPORT SystemInit
IMPORT __main
LDR R0, =SystemInit
BLX R0
LDR R0, =__main
BX R0
ENDP
; Macro to define default exception/interrupt handlers.
; Default handler are weak symbols with an endless loop.
; They can be overwritten by real handlers.
MACRO
Set_Default_Handler $Handler_Name
$Handler_Name PROC
EXPORT $Handler_Name [WEAK]
B .
ENDP
MEND
; Default exception/interrupt handler
Set_Default_Handler NMI_Handler
Set_Default_Handler HardFault_Handler
Set_Default_Handler MemManage_Handler
Set_Default_Handler BusFault_Handler
Set_Default_Handler UsageFault_Handler
Set_Default_Handler SVC_Handler
Set_Default_Handler DebugMon_Handler
Set_Default_Handler PendSV_Handler
Set_Default_Handler SysTick_Handler
Set_Default_Handler Interrupt0_Handler
Set_Default_Handler Interrupt1_Handler
Set_Default_Handler Interrupt2_Handler
Set_Default_Handler Interrupt3_Handler
Set_Default_Handler Interrupt4_Handler
Set_Default_Handler Interrupt5_Handler
Set_Default_Handler Interrupt6_Handler
Set_Default_Handler Interrupt7_Handler
Set_Default_Handler Interrupt8_Handler
Set_Default_Handler Interrupt9_Handler
ALIGN
; User setup Stack & Heap
EXPORT __stack_limit
EXPORT __initial_sp
IF Heap_Size != 0 ; Heap is provided
EXPORT __heap_base
EXPORT __heap_limit
ENDIF
END
Drivers/CMSIS/DSP/Examples/ARM/arm_fir_example/RTE/Device/ARMCM7_SP/system_ARMCM7.c
+85
View File
@@ -0,0 +1,85 @@
/**************************************************************************//**
* @file system_ARMCM7.c
* @brief CMSIS Device System Source File for
* ARMCM7 Device
* @version V5.3.1
* @date 09. July 2018
******************************************************************************/
/*
* Copyright (c) 2009-2018 Arm Limited. All rights reserved.
*
* SPDX-License-Identifier: Apache-2.0
*
* Licensed under the Apache License, Version 2.0 (the License); you may
* not use this file except in compliance with the License.
* You may obtain a copy of the License at
*
* www.apache.org/licenses/LICENSE-2.0
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an AS IS BASIS, WITHOUT
* WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
* See the License for the specific language governing permissions and
* limitations under the License.
*/
#if defined (ARMCM7)
#include "ARMCM7.h"
#elif defined (ARMCM7_SP)
#include "ARMCM7_SP.h"
#elif defined (ARMCM7_DP)
#include "ARMCM7_DP.h"
#else
#error device not specified!
#endif
/*----------------------------------------------------------------------------
Define clocks
*----------------------------------------------------------------------------*/
#define XTAL (50000000UL) /* Oscillator frequency */
#define SYSTEM_CLOCK (XTAL / 2U)
/*----------------------------------------------------------------------------
Externals
*----------------------------------------------------------------------------*/
#if defined (__VTOR_PRESENT) && (__VTOR_PRESENT == 1U)
extern uint32_t __Vectors;
#endif
/*----------------------------------------------------------------------------
System Core Clock Variable
*----------------------------------------------------------------------------*/
uint32_t SystemCoreClock = SYSTEM_CLOCK; /* System Core Clock Frequency */
/*----------------------------------------------------------------------------
System Core Clock update function
*----------------------------------------------------------------------------*/
void SystemCoreClockUpdate (void)
{
SystemCoreClock = SYSTEM_CLOCK;
}
/*----------------------------------------------------------------------------
System initialization function
*----------------------------------------------------------------------------*/
void SystemInit (void)
{
#if defined (__VTOR_PRESENT) && (__VTOR_PRESENT == 1U)
SCB->VTOR = (uint32_t) &__Vectors;
#endif
#if defined (__FPU_USED) && (__FPU_USED == 1U)
SCB->CPACR |= ((3U << 10U*2U) | /* enable CP10 Full Access */
(3U << 11U*2U) ); /* enable CP11 Full Access */
#endif
#ifdef UNALIGNED_SUPPORT_DISABLE
SCB->CCR |= SCB_CCR_UNALIGN_TRP_Msk;
#endif
SystemCoreClock = SYSTEM_CLOCK;
}
Drivers/CMSIS/DSP/Examples/ARM/arm_fir_example/arm_fir_data.c
+134
View File
@@ -0,0 +1,134 @@
/* ----------------------------------------------------------------------
* Copyright (C) 2010-2012 ARM Limited. All rights reserved.
*
* $Date: 17. January 2013
* $Revision: V1.4.0
*
* Project: CMSIS DSP Library
* Title: arm_fir_data.c
*
* Description: Data file used for example code
*
* Target Processor: Cortex-M4/Cortex-M3/Cortex-M0
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* - Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* - Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in
* the documentation and/or other materials provided with the
* distribution.
* - Neither the name of ARM LIMITED nor the names of its contributors
* may be used to endorse or promote products derived from this
* software without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
* COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
* BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
* LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
* CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
* ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
* POSSIBILITY OF SUCH DAMAGE.
* -------------------------------------------------------------------- */
#include "arm_math.h"
/* ----------------------------------------------------------------------
** Test input signal contains 1000Hz + 15000 Hz
** ------------------------------------------------------------------- */
float32_t testInput_f32_1kHz_15kHz[320] =
{
+0.0000000000f, +0.5924659585f, -0.0947343455f, +0.1913417162f, +1.0000000000f, +0.4174197128f, +0.3535533906f, +1.2552931065f,
+0.8660254038f, +0.4619397663f, +1.3194792169f, +1.1827865776f, +0.5000000000f, +1.1827865776f, +1.3194792169f, +0.4619397663f,
+0.8660254038f, +1.2552931065f, +0.3535533906f, +0.4174197128f, +1.0000000000f, +0.1913417162f, -0.0947343455f, +0.5924659585f,
-0.0000000000f, -0.5924659585f, +0.0947343455f, -0.1913417162f, -1.0000000000f, -0.4174197128f, -0.3535533906f, -1.2552931065f,
-0.8660254038f, -0.4619397663f, -1.3194792169f, -1.1827865776f, -0.5000000000f, -1.1827865776f, -1.3194792169f, -0.4619397663f,
-0.8660254038f, -1.2552931065f, -0.3535533906f, -0.4174197128f, -1.0000000000f, -0.1913417162f, +0.0947343455f, -0.5924659585f,
+0.0000000000f, +0.5924659585f, -0.0947343455f, +0.1913417162f, +1.0000000000f, +0.4174197128f, +0.3535533906f, +1.2552931065f,
+0.8660254038f, +0.4619397663f, +1.3194792169f, +1.1827865776f, +0.5000000000f, +1.1827865776f, +1.3194792169f, +0.4619397663f,
+0.8660254038f, +1.2552931065f, +0.3535533906f, +0.4174197128f, +1.0000000000f, +0.1913417162f, -0.0947343455f, +0.5924659585f,
+0.0000000000f, -0.5924659585f, +0.0947343455f, -0.1913417162f, -1.0000000000f, -0.4174197128f, -0.3535533906f, -1.2552931065f,
-0.8660254038f, -0.4619397663f, -1.3194792169f, -1.1827865776f, -0.5000000000f, -1.1827865776f, -1.3194792169f, -0.4619397663f,
-0.8660254038f, -1.2552931065f, -0.3535533906f, -0.4174197128f, -1.0000000000f, -0.1913417162f, +0.0947343455f, -0.5924659585f,
+0.0000000000f, +0.5924659585f, -0.0947343455f, +0.1913417162f, +1.0000000000f, +0.4174197128f, +0.3535533906f, +1.2552931065f,
+0.8660254038f, +0.4619397663f, +1.3194792169f, +1.1827865776f, +0.5000000000f, +1.1827865776f, +1.3194792169f, +0.4619397663f,
+0.8660254038f, +1.2552931065f, +0.3535533906f, +0.4174197128f, +1.0000000000f, +0.1913417162f, -0.0947343455f, +0.5924659585f,
+0.0000000000f, -0.5924659585f, +0.0947343455f, -0.1913417162f, -1.0000000000f, -0.4174197128f, -0.3535533906f, -1.2552931065f,
-0.8660254038f, -0.4619397663f, -1.3194792169f, -1.1827865776f, -0.5000000000f, -1.1827865776f, -1.3194792169f, -0.4619397663f,
-0.8660254038f, -1.2552931065f, -0.3535533906f, -0.4174197128f, -1.0000000000f, -0.1913417162f, +0.0947343455f, -0.5924659585f,
-0.0000000000f, +0.5924659585f, -0.0947343455f, +0.1913417162f, +1.0000000000f, +0.4174197128f, +0.3535533906f, +1.2552931065f,
+0.8660254038f, +0.4619397663f, +1.3194792169f, +1.1827865776f, +0.5000000000f, +1.1827865776f, +1.3194792169f, +0.4619397663f,
+0.8660254038f, +1.2552931065f, +0.3535533906f, +0.4174197128f, +1.0000000000f, +0.1913417162f, -0.0947343455f, +0.5924659585f,
-0.0000000000f, -0.5924659585f, +0.0947343455f, -0.1913417162f, -1.0000000000f, -0.4174197128f, -0.3535533906f, -1.2552931065f,
-0.8660254038f, -0.4619397663f, -1.3194792169f, -1.1827865776f, -0.5000000000f, -1.1827865776f, -1.3194792169f, -0.4619397663f,
-0.8660254038f, -1.2552931065f, -0.3535533906f, -0.4174197128f, -1.0000000000f, -0.1913417162f, +0.0947343455f, -0.5924659585f,
+0.0000000000f, +0.5924659585f, -0.0947343455f, +0.1913417162f, +1.0000000000f, +0.4174197128f, +0.3535533906f, +1.2552931065f,
+0.8660254038f, +0.4619397663f, +1.3194792169f, +1.1827865776f, +0.5000000000f, +1.1827865776f, +1.3194792169f, +0.4619397663f,
+0.8660254038f, +1.2552931065f, +0.3535533906f, +0.4174197128f, +1.0000000000f, +0.1913417162f, -0.0947343455f, +0.5924659585f,
+0.0000000000f, -0.5924659585f, +0.0947343455f, -0.1913417162f, -1.0000000000f, -0.4174197128f, -0.3535533906f, -1.2552931065f,
-0.8660254038f, -0.4619397663f, -1.3194792169f, -1.1827865776f, -0.5000000000f, -1.1827865776f, -1.3194792169f, -0.4619397663f,
-0.8660254038f, -1.2552931065f, -0.3535533906f, -0.4174197128f, -1.0000000000f, -0.1913417162f, +0.0947343455f, -0.5924659585f,
-0.0000000000f, +0.5924659585f, -0.0947343455f, +0.1913417162f, +1.0000000000f, +0.4174197128f, +0.3535533906f, +1.2552931065f,
+0.8660254038f, +0.4619397663f, +1.3194792169f, +1.1827865776f, +0.5000000000f, +1.1827865776f, +1.3194792169f, +0.4619397663f,
+0.8660254038f, +1.2552931065f, +0.3535533906f, +0.4174197128f, +1.0000000000f, +0.1913417162f, -0.0947343455f, +0.5924659585f,
+0.0000000000f, -0.5924659585f, +0.0947343455f, -0.1913417162f, -1.0000000000f, -0.4174197128f, -0.3535533906f, -1.2552931065f,
-0.8660254038f, -0.4619397663f, -1.3194792169f, -1.1827865776f, -0.5000000000f, -1.1827865776f, -1.3194792169f, -0.4619397663f,
-0.8660254038f, -1.2552931065f, -0.3535533906f, -0.4174197128f, -1.0000000000f, -0.1913417162f, +0.0947343455f, -0.5924659585f,
-0.0000000000f, +0.5924659585f, -0.0947343455f, +0.1913417162f, +1.0000000000f, +0.4174197128f, +0.3535533906f, +1.2552931065f,
+0.8660254038f, +0.4619397663f, +1.3194792169f, +1.1827865776f, +0.5000000000f, +1.1827865776f, +1.3194792169f, +0.4619397663f,
+0.8660254038f, +1.2552931065f, +0.3535533906f, +0.4174197128f, +1.0000000000f, +0.1913417162f, -0.0947343455f, +0.5924659585f,
+0.0000000000f, -0.5924659585f, +0.0947343455f, -0.1913417162f, -1.0000000000f, -0.4174197128f, -0.3535533906f, -1.2552931065f,
};
float32_t refOutput[320] =
{
+0.0000000000f, -0.0010797829f, -0.0007681386f, -0.0001982932f, +0.0000644313f, +0.0020854271f, +0.0036891871f, +0.0015855941f,
-0.0026280805f, -0.0075907658f, -0.0119390538f, -0.0086665968f, +0.0088981202f, +0.0430539279f, +0.0974468742f, +0.1740405600f,
+0.2681416601f, +0.3747720089f, +0.4893362230f, +0.6024154672f, +0.7058740791f, +0.7968348987f, +0.8715901940f, +0.9277881093f,
+0.9682182661f, +0.9934674267f, +1.0012052245f, +0.9925859371f, +0.9681538347f, +0.9257026822f, +0.8679010068f, +0.7952493046f,
+0.7085021596f, +0.6100062330f, +0.5012752767f, +0.3834386057f, +0.2592435399f, +0.1309866321f, -0.0000000000f, -0.1309866321f,
-0.2592435399f, -0.3834386057f, -0.5012752767f, -0.6100062330f, -0.7085021596f, -0.7952493046f, -0.8679010068f, -0.9257026822f,
-0.9681538347f, -0.9936657199f, -1.0019733630f, -0.9936657199f, -0.9681538347f, -0.9257026822f, -0.8679010068f, -0.7952493046f,
-0.7085021596f, -0.6100062330f, -0.5012752767f, -0.3834386057f, -0.2592435399f, -0.1309866321f, +0.0000000000f, +0.1309866321f,
+0.2592435399f, +0.3834386057f, +0.5012752767f, +0.6100062330f, +0.7085021596f, +0.7952493046f, +0.8679010068f, +0.9257026822f,
+0.9681538347f, +0.9936657199f, +1.0019733630f, +0.9936657199f, +0.9681538347f, +0.9257026822f, +0.8679010068f, +0.7952493046f,
+0.7085021596f, +0.6100062330f, +0.5012752767f, +0.3834386057f, +0.2592435399f, +0.1309866321f, -0.0000000000f, -0.1309866321f,
-0.2592435399f, -0.3834386057f, -0.5012752767f, -0.6100062330f, -0.7085021596f, -0.7952493046f, -0.8679010068f, -0.9257026822f,
-0.9681538347f, -0.9936657199f, -1.0019733630f, -0.9936657199f, -0.9681538347f, -0.9257026822f, -0.8679010068f, -0.7952493046f,
-0.7085021596f, -0.6100062330f, -0.5012752767f, -0.3834386057f, -0.2592435399f, -0.1309866321f, +0.0000000000f, +0.1309866321f,
+0.2592435399f, +0.3834386057f, +0.5012752767f, +0.6100062330f, +0.7085021596f, +0.7952493046f, +0.8679010068f, +0.9257026822f,
+0.9681538347f, +0.9936657199f, +1.0019733630f, +0.9936657199f, +0.9681538347f, +0.9257026822f, +0.8679010068f, +0.7952493046f,
+0.7085021596f, +0.6100062330f, +0.5012752767f, +0.3834386057f, +0.2592435399f, +0.1309866321f, -0.0000000000f, -0.1309866321f,
-0.2592435399f, -0.3834386057f, -0.5012752767f, -0.6100062330f, -0.7085021596f, -0.7952493046f, -0.8679010068f, -0.9257026822f,
-0.9681538347f, -0.9936657199f, -1.0019733630f, -0.9936657199f, -0.9681538347f, -0.9257026822f, -0.8679010068f, -0.7952493046f,
-0.7085021596f, -0.6100062330f, -0.5012752767f, -0.3834386057f, -0.2592435399f, -0.1309866321f, +0.0000000000f, +0.1309866321f,
+0.2592435399f, +0.3834386057f, +0.5012752767f, +0.6100062330f, +0.7085021596f, +0.7952493046f, +0.8679010068f, +0.9257026822f,
+0.9681538347f, +0.9936657199f, +1.0019733630f, +0.9936657199f, +0.9681538347f, +0.9257026822f, +0.8679010068f, +0.7952493046f,
+0.7085021596f, +0.6100062330f, +0.5012752767f, +0.3834386057f, +0.2592435399f, +0.1309866321f, +0.0000000000f, -0.1309866321f,
-0.2592435399f, -0.3834386057f, -0.5012752767f, -0.6100062330f, -0.7085021596f, -0.7952493046f, -0.8679010068f, -0.9257026822f,
-0.9681538347f, -0.9936657199f, -1.0019733630f, -0.9936657199f, -0.9681538347f, -0.9257026822f, -0.8679010068f, -0.7952493046f,
-0.7085021596f, -0.6100062330f, -0.5012752767f, -0.3834386057f, -0.2592435399f, -0.1309866321f, +0.0000000000f, +0.1309866321f,
+0.2592435399f, +0.3834386057f, +0.5012752767f, +0.6100062330f, +0.7085021596f, +0.7952493046f, +0.8679010068f, +0.9257026822f,
+0.9681538347f, +0.9936657199f, +1.0019733630f, +0.9936657199f, +0.9681538347f, +0.9257026822f, +0.8679010068f, +0.7952493046f,
+0.7085021596f, +0.6100062330f, +0.5012752767f, +0.3834386057f, +0.2592435399f, +0.1309866321f, +0.0000000000f, -0.1309866321f,
-0.2592435399f, -0.3834386057f, -0.5012752767f, -0.6100062330f, -0.7085021596f, -0.7952493046f, -0.8679010068f, -0.9257026822f,
-0.9681538347f, -0.9936657199f, -1.0019733630f, -0.9936657199f, -0.9681538347f, -0.9257026822f, -0.8679010068f, -0.7952493046f,
-0.7085021596f, -0.6100062330f, -0.5012752767f, -0.3834386057f, -0.2592435399f, -0.1309866321f, -0.0000000000f, +0.1309866321f,
+0.2592435399f, +0.3834386057f, +0.5012752767f, +0.6100062330f, +0.7085021596f, +0.7952493046f, +0.8679010068f, +0.9257026822f,
+0.9681538347f, +0.9936657199f, +1.0019733630f, +0.9936657199f, +0.9681538347f, +0.9257026822f, +0.8679010068f, +0.7952493046f,
+0.7085021596f, +0.6100062330f, +0.5012752767f, +0.3834386057f, +0.2592435399f, +0.1309866321f, +0.0000000000f, -0.1309866321f,
-0.2592435399f, -0.3834386057f, -0.5012752767f, -0.6100062330f, -0.7085021596f, -0.7952493046f, -0.8679010068f, -0.9257026822f,
-0.9681538347f, -0.9936657199f, -1.0019733630f, -0.9936657199f, -0.9681538347f, -0.9257026822f, -0.8679010068f, -0.7952493046f,
-0.7085021596f, -0.6100062330f, -0.5012752767f, -0.3834386057f, -0.2592435399f, -0.1309866321f, +0.0000000000f, +0.1309866321f,
+0.2592435399f, +0.3834386057f, +0.5012752767f, +0.6100062330f, +0.7085021596f, +0.7952493046f, +0.8679010068f, +0.9257026822f,
+0.9681538347f, +0.9936657199f, +1.0019733630f, +0.9936657199f, +0.9681538347f, +0.9257026822f, +0.8679010068f, +0.7952493046f
};
Drivers/CMSIS/DSP/Examples/ARM/arm_fir_example/arm_fir_example_f32.c
+233
View File
@@ -0,0 +1,233 @@
/* ----------------------------------------------------------------------
* Copyright (C) 2010-2012 ARM Limited. All rights reserved.
*
* $Date: 17. January 2013
* $Revision: V1.4.0
*
* Project: CMSIS DSP Library
* Title: arm_fir_example_f32.c
*
* Description: Example code demonstrating how an FIR filter can be used
* as a low pass filter.
*
* Target Processor: Cortex-M4/Cortex-M3
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* - Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* - Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in
* the documentation and/or other materials provided with the
* distribution.
* - Neither the name of ARM LIMITED nor the names of its contributors
* may be used to endorse or promote products derived from this
* software without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
* COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
* BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
* LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
* CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
* ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
* POSSIBILITY OF SUCH DAMAGE.
* -------------------------------------------------------------------- */
/**
* @ingroup groupExamples
*/
/**
* @defgroup FIRLPF FIR Lowpass Filter Example
*
* \par Description:
* \par
* Removes high frequency signal components from the input using an FIR lowpass filter.
* The example demonstrates how to configure an FIR filter and then pass data through
* it in a block-by-block fashion.
* \image html FIRLPF_signalflow.gif
*
* \par Algorithm:
* \par
* The input signal is a sum of two sine waves: 1 kHz and 15 kHz.
* This is processed by an FIR lowpass filter with cutoff frequency 6 kHz.
* The lowpass filter eliminates the 15 kHz signal leaving only the 1 kHz sine wave at the output.
* \par
* The lowpass filter was designed using MATLAB with a sample rate of 48 kHz and
* a length of 29 points.
* The MATLAB code to generate the filter coefficients is shown below:
* <pre>
* h = fir1(28, 6/24);
* </pre>
* The first argument is the "order" of the filter and is always one less than the desired length.
* The second argument is the normalized cutoff frequency. This is in the range 0 (DC) to 1.0 (Nyquist).
* A 6 kHz cutoff with a Nyquist frequency of 24 kHz lies at a normalized frequency of 6/24 = 0.25.
* The CMSIS FIR filter function requires the coefficients to be in time reversed order.
* <pre>
* fliplr(h)
* </pre>
* The resulting filter coefficients and are shown below.
* Note that the filter is symmetric (a property of linear phase FIR filters)
* and the point of symmetry is sample 14. Thus the filter will have a delay of
* 14 samples for all frequencies.
* \par
* \image html FIRLPF_coeffs.gif
* \par
* The frequency response of the filter is shown next.
* The passband gain of the filter is 1.0 and it reaches 0.5 at the cutoff frequency 6 kHz.
* \par
* \image html FIRLPF_response.gif
* \par
* The input signal is shown below.
* The left hand side shows the signal in the time domain while the right hand side is a frequency domain representation.
* The two sine wave components can be clearly seen.
* \par
* \image html FIRLPF_input.gif
* \par
* The output of the filter is shown below. The 15 kHz component has been eliminated.
* \par
* \image html FIRLPF_output.gif
*
* \par Variables Description:
* \par
* \li \c testInput_f32_1kHz_15kHz points to the input data
* \li \c refOutput points to the reference output data
* \li \c testOutput points to the test output data
* \li \c firStateF32 points to state buffer
* \li \c firCoeffs32 points to coefficient buffer
* \li \c blockSize number of samples processed at a time
* \li \c numBlocks number of frames
*
* \par CMSIS DSP Software Library Functions Used:
* \par
* - arm_fir_init_f32()
* - arm_fir_f32()
*
* <b> Refer </b>
* \link arm_fir_example_f32.c \endlink
*
*/
/** \example arm_fir_example_f32.c
*/
/* ----------------------------------------------------------------------
** Include Files
** ------------------------------------------------------------------- */
#include "arm_math.h"
#include "math_helper.h"
/* ----------------------------------------------------------------------
** Macro Defines
** ------------------------------------------------------------------- */
#define TEST_LENGTH_SAMPLES 320
#define SNR_THRESHOLD_F32 140.0f
#define BLOCK_SIZE 32
#define NUM_TAPS 29
/* -------------------------------------------------------------------
* The input signal and reference output (computed with MATLAB)
* are defined externally in arm_fir_lpf_data.c.
* ------------------------------------------------------------------- */
extern float32_t testInput_f32_1kHz_15kHz[TEST_LENGTH_SAMPLES];
extern float32_t refOutput[TEST_LENGTH_SAMPLES];
/* -------------------------------------------------------------------
* Declare Test output buffer
* ------------------------------------------------------------------- */
static float32_t testOutput[TEST_LENGTH_SAMPLES];
/* -------------------------------------------------------------------
* Declare State buffer of size (numTaps + blockSize - 1)
* ------------------------------------------------------------------- */
static float32_t firStateF32[BLOCK_SIZE + NUM_TAPS - 1];
/* ----------------------------------------------------------------------
** FIR Coefficients buffer generated using fir1() MATLAB function.
** fir1(28, 6/24)
** ------------------------------------------------------------------- */
const float32_t firCoeffs32[NUM_TAPS] = {
-0.0018225230f, -0.0015879294f, +0.0000000000f, +0.0036977508f, +0.0080754303f, +0.0085302217f, -0.0000000000f, -0.0173976984f,
-0.0341458607f, -0.0333591565f, +0.0000000000f, +0.0676308395f, +0.1522061835f, +0.2229246956f, +0.2504960933f, +0.2229246956f,
+0.1522061835f, +0.0676308395f, +0.0000000000f, -0.0333591565f, -0.0341458607f, -0.0173976984f, -0.0000000000f, +0.0085302217f,
+0.0080754303f, +0.0036977508f, +0.0000000000f, -0.0015879294f, -0.0018225230f
};
/* ------------------------------------------------------------------
* Global variables for FIR LPF Example
* ------------------------------------------------------------------- */
uint32_t blockSize = BLOCK_SIZE;
uint32_t numBlocks = TEST_LENGTH_SAMPLES/BLOCK_SIZE;
float32_t snr;
/* ----------------------------------------------------------------------
* FIR LPF Example
* ------------------------------------------------------------------- */
int32_t main(void)
{
uint32_t i;
arm_fir_instance_f32 S;
arm_status status;
float32_t *inputF32, *outputF32;
/* Initialize input and output buffer pointers */
inputF32 = &testInput_f32_1kHz_15kHz[0];
outputF32 = &testOutput[0];
/* Call FIR init function to initialize the instance structure. */
arm_fir_init_f32(&S, NUM_TAPS, (float32_t *)&firCoeffs32[0], &firStateF32[0], blockSize);
/* ----------------------------------------------------------------------
** Call the FIR process function for every blockSize samples
** ------------------------------------------------------------------- */
for(i=0; i < numBlocks; i++)
{
arm_fir_f32(&S, inputF32 + (i * blockSize), outputF32 + (i * blockSize), blockSize);
}
/* ----------------------------------------------------------------------
** Compare the generated output against the reference output computed
** in MATLAB.
** ------------------------------------------------------------------- */
snr = arm_snr_f32(&refOutput[0], &testOutput[0], TEST_LENGTH_SAMPLES);
if (snr < SNR_THRESHOLD_F32)
{
status = ARM_MATH_TEST_FAILURE;
}
else
{
status = ARM_MATH_SUCCESS;
}
/* ----------------------------------------------------------------------
** Loop here if the signal does not match the reference output.
** ------------------------------------------------------------------- */
if ( status != ARM_MATH_SUCCESS)
{
while (1);
}
while (1); /* main function does not return */
}
/** \endlink */
Drivers/CMSIS/DSP/Examples/ARM/arm_fir_example/math_helper.c
+466
View File
@@ -0,0 +1,466 @@
/* ----------------------------------------------------------------------
* Copyright (C) 2010-2012 ARM Limited. All rights reserved.
*
* $Date: 17. January 2013
* $Revision: V1.4.0 b
*
* Project: CMSIS DSP Library
*
* Title: math_helper.c
*
* Description: Definition of all helper functions required.
*
* Target Processor: Cortex-M4/Cortex-M3
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* - Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* - Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in
* the documentation and/or other materials provided with the
* distribution.
* - Neither the name of ARM LIMITED nor the names of its contributors
* may be used to endorse or promote products derived from this
* software without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
* COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
* BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
* LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
* CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
* ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
* POSSIBILITY OF SUCH DAMAGE.
* -------------------------------------------------------------------- */
/* ----------------------------------------------------------------------
* Include standard header files
* -------------------------------------------------------------------- */
#include<math.h>
/* ----------------------------------------------------------------------
* Include project header files
* -------------------------------------------------------------------- */
#include "math_helper.h"
/**
* @brief Caluclation of SNR
* @param[in] pRef Pointer to the reference buffer
* @param[in] pTest Pointer to the test buffer
* @param[in] buffSize total number of samples
* @return SNR
* The function Caluclates signal to noise ratio for the reference output
* and test output
*/
float arm_snr_f32(float *pRef, float *pTest, uint32_t buffSize)
{
float EnergySignal = 0.0, EnergyError = 0.0;
uint32_t i;
float SNR;
int temp;
int *test;
for (i = 0; i < buffSize; i++)
{
/* Checking for a NAN value in pRef array */
test = (int *)(&pRef[i]);
temp = *test;
if (temp == 0x7FC00000)
{
return(0);
}
/* Checking for a NAN value in pTest array */
test = (int *)(&pTest[i]);
temp = *test;
if (temp == 0x7FC00000)
{
return(0);
}
EnergySignal += pRef[i] * pRef[i];
EnergyError += (pRef[i] - pTest[i]) * (pRef[i] - pTest[i]);
}
/* Checking for a NAN value in EnergyError */
test = (int *)(&EnergyError);
temp = *test;
if (temp == 0x7FC00000)
{
return(0);
}
SNR = 10 * log10 (EnergySignal / EnergyError);
return (SNR);
}
/**
* @brief Provide guard bits for Input buffer
* @param[in,out] input_buf Pointer to input buffer
* @param[in] blockSize block Size
* @param[in] guard_bits guard bits
* @return none
* The function Provides the guard bits for the buffer
* to avoid overflow
*/
void arm_provide_guard_bits_q15 (q15_t * input_buf, uint32_t blockSize,
uint32_t guard_bits)
{
uint32_t i;
for (i = 0; i < blockSize; i++)
{
input_buf[i] = input_buf[i] >> guard_bits;
}
}
/**
* @brief Converts float to fixed in q12.20 format
* @param[in] pIn pointer to input buffer
* @param[out] pOut pointer to outputbuffer
* @param[in] numSamples number of samples in the input buffer
* @return none
* The function converts floating point values to fixed point(q12.20) values
*/
void arm_float_to_q12_20(float *pIn, q31_t * pOut, uint32_t numSamples)
{
uint32_t i;
for (i = 0; i < numSamples; i++)
{
/* 1048576.0f corresponds to pow(2, 20) */
pOut[i] = (q31_t) (pIn[i] * 1048576.0f);
pOut[i] += pIn[i] > 0 ? 0.5 : -0.5;
if (pIn[i] == (float) 1.0)
{
pOut[i] = 0x000FFFFF;
}
}
}
/**
* @brief Compare MATLAB Reference Output and ARM Test output
* @param[in] pIn Pointer to Ref buffer
* @param[in] pOut Pointer to Test buffer
* @param[in] numSamples number of samples in the buffer
* @return maximum difference
*/
uint32_t arm_compare_fixed_q15(q15_t *pIn, q15_t *pOut, uint32_t numSamples)
{
uint32_t i;
int32_t diff, diffCrnt = 0;
uint32_t maxDiff = 0;
for (i = 0; i < numSamples; i++)
{
diff = pIn[i] - pOut[i];
diffCrnt = (diff > 0) ? diff : -diff;
if (diffCrnt > maxDiff)
{
maxDiff = diffCrnt;
}
}
return(maxDiff);
}
/**
* @brief Compare MATLAB Reference Output and ARM Test output
* @param[in] pIn Pointer to Ref buffer
* @param[in] pOut Pointer to Test buffer
* @param[in] numSamples number of samples in the buffer
* @return maximum difference
*/
uint32_t arm_compare_fixed_q31(q31_t *pIn, q31_t * pOut, uint32_t numSamples)
{
uint32_t i;
int32_t diff, diffCrnt = 0;
uint32_t maxDiff = 0;
for (i = 0; i < numSamples; i++)
{
diff = pIn[i] - pOut[i];
diffCrnt = (diff > 0) ? diff : -diff;
if (diffCrnt > maxDiff)
{
maxDiff = diffCrnt;
}
}
return(maxDiff);
}
/**
* @brief Provide guard bits for Input buffer
* @param[in,out] input_buf Pointer to input buffer
* @param[in] blockSize block Size
* @param[in] guard_bits guard bits
* @return none
* The function Provides the guard bits for the buffer
* to avoid overflow
*/
void arm_provide_guard_bits_q31 (q31_t * input_buf,
uint32_t blockSize,
uint32_t guard_bits)
{
uint32_t i;
for (i = 0; i < blockSize; i++)
{
input_buf[i] = input_buf[i] >> guard_bits;
}
}
/**
* @brief Provide guard bits for Input buffer
* @param[in,out] input_buf Pointer to input buffer
* @param[in] blockSize block Size
* @param[in] guard_bits guard bits
* @return none
* The function Provides the guard bits for the buffer
* to avoid overflow
*/
void arm_provide_guard_bits_q7 (q7_t * input_buf,
uint32_t blockSize,
uint32_t guard_bits)
{
uint32_t i;
for (i = 0; i < blockSize; i++)
{
input_buf[i] = input_buf[i] >> guard_bits;
}
}
/**
* @brief Caluclates number of guard bits
* @param[in] num_adds number of additions
* @return guard bits
* The function Caluclates the number of guard bits
* depending on the numtaps
*/
uint32_t arm_calc_guard_bits (uint32_t num_adds)
{
uint32_t i = 1, j = 0;
if (num_adds == 1)
{
return (0);
}
while (i < num_adds)
{
i = i * 2;
j++;
}
return (j);
}
/**
* @brief Apply guard bits to buffer
* @param[in,out] pIn pointer to input buffer
* @param[in] numSamples number of samples in the input buffer
* @param[in] guard_bits guard bits
* @return none
*/
void arm_apply_guard_bits (float32_t *pIn,
uint32_t numSamples,
uint32_t guard_bits)
{
uint32_t i;
for (i = 0; i < numSamples; i++)
{
pIn[i] = pIn[i] * arm_calc_2pow(guard_bits);
}
}
/**
* @brief Calculates pow(2, numShifts)
* @param[in] numShifts number of shifts
* @return pow(2, numShifts)
*/
uint32_t arm_calc_2pow(uint32_t numShifts)
{
uint32_t i, val = 1;
for (i = 0; i < numShifts; i++)
{
val = val * 2;
}
return(val);
}
/**
* @brief Converts float to fixed q14
* @param[in] pIn pointer to input buffer
* @param[out] pOut pointer to output buffer
* @param[in] numSamples number of samples in the buffer
* @return none
* The function converts floating point values to fixed point values
*/
void arm_float_to_q14 (float *pIn, q15_t *pOut, uint32_t numSamples)
{
uint32_t i;
for (i = 0; i < numSamples; i++)
{
/* 16384.0f corresponds to pow(2, 14) */
pOut[i] = (q15_t) (pIn[i] * 16384.0f);
pOut[i] += pIn[i] > 0 ? 0.5 : -0.5;
if (pIn[i] == (float) 2.0)
{
pOut[i] = 0x7FFF;
}
}
}
/**
* @brief Converts float to fixed q30 format
* @param[in] pIn pointer to input buffer
* @param[out] pOut pointer to output buffer
* @param[in] numSamples number of samples in the buffer
* @return none
* The function converts floating point values to fixed point values
*/
void arm_float_to_q30 (float *pIn, q31_t * pOut, uint32_t numSamples)
{
uint32_t i;
for (i = 0; i < numSamples; i++)
{
/* 1073741824.0f corresponds to pow(2, 30) */
pOut[i] = (q31_t) (pIn[i] * 1073741824.0f);
pOut[i] += pIn[i] > 0 ? 0.5 : -0.5;
if (pIn[i] == (float) 2.0)
{
pOut[i] = 0x7FFFFFFF;
}
}
}
/**
* @brief Converts float to fixed q30 format
* @param[in] pIn pointer to input buffer
* @param[out] pOut pointer to output buffer
* @param[in] numSamples number of samples in the buffer
* @return none
* The function converts floating point values to fixed point values
*/
void arm_float_to_q29 (float *pIn, q31_t *pOut, uint32_t numSamples)
{
uint32_t i;
for (i = 0; i < numSamples; i++)
{
/* 1073741824.0f corresponds to pow(2, 30) */
pOut[i] = (q31_t) (pIn[i] * 536870912.0f);
pOut[i] += pIn[i] > 0 ? 0.5 : -0.5;
if (pIn[i] == (float) 4.0)
{
pOut[i] = 0x7FFFFFFF;
}
}
}
/**
* @brief Converts float to fixed q28 format
* @param[in] pIn pointer to input buffer
* @param[out] pOut pointer to output buffer
* @param[in] numSamples number of samples in the buffer
* @return none
* The function converts floating point values to fixed point values
*/
void arm_float_to_q28 (float *pIn, q31_t *pOut, uint32_t numSamples)
{
uint32_t i;
for (i = 0; i < numSamples; i++)
{
/* 268435456.0f corresponds to pow(2, 28) */
pOut[i] = (q31_t) (pIn[i] * 268435456.0f);
pOut[i] += pIn[i] > 0 ? 0.5 : -0.5;
if (pIn[i] == (float) 8.0)
{
pOut[i] = 0x7FFFFFFF;
}
}
}
/**
* @brief Clip the float values to +/- 1
* @param[in,out] pIn input buffer
* @param[in] numSamples number of samples in the buffer
* @return none
* The function converts floating point values to fixed point values
*/
void arm_clip_f32 (float *pIn, uint32_t numSamples)
{
uint32_t i;
for (i = 0; i < numSamples; i++)
{
if (pIn[i] > 1.0f)
{
pIn[i] = 1.0;
}
else if ( pIn[i] < -1.0f)
{
pIn[i] = -1.0;
}
}
}
Drivers/CMSIS/DSP/Examples/ARM/arm_fir_example/math_helper.h
+63
View File
@@ -0,0 +1,63 @@
/* ----------------------------------------------------------------------
* Copyright (C) 2010-2013 ARM Limited. All rights reserved.
*
* $Date: 17. January 2013
* $Revision: V1.4.0
*
* Project: CMSIS DSP Library
*
* Title: math_helper.h
*
* Description: Prototypes of all helper functions required.
*
* Target Processor: Cortex-M4/Cortex-M3
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* - Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* - Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in
* the documentation and/or other materials provided with the
* distribution.
* - Neither the name of ARM LIMITED nor the names of its contributors
* may be used to endorse or promote products derived from this
* software without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
* COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
* BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
* LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
* CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
* ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
* POSSIBILITY OF SUCH DAMAGE.
* -------------------------------------------------------------------- */
#include "arm_math.h"
#ifndef MATH_HELPER_H
#define MATH_HELPER_H
float arm_snr_f32(float *pRef, float *pTest, uint32_t buffSize);
void arm_float_to_q12_20(float *pIn, q31_t * pOut, uint32_t numSamples);
void arm_provide_guard_bits_q15(q15_t *input_buf, uint32_t blockSize, uint32_t guard_bits);
void arm_provide_guard_bits_q31(q31_t *input_buf, uint32_t blockSize, uint32_t guard_bits);
void arm_float_to_q14(float *pIn, q15_t *pOut, uint32_t numSamples);
void arm_float_to_q29(float *pIn, q31_t *pOut, uint32_t numSamples);
void arm_float_to_q28(float *pIn, q31_t *pOut, uint32_t numSamples);
void arm_float_to_q30(float *pIn, q31_t *pOut, uint32_t numSamples);
void arm_clip_f32(float *pIn, uint32_t numSamples);
uint32_t arm_calc_guard_bits(uint32_t num_adds);
void arm_apply_guard_bits (float32_t * pIn, uint32_t numSamples, uint32_t guard_bits);
uint32_t arm_compare_fixed_q15(q15_t *pIn, q15_t * pOut, uint32_t numSamples);
uint32_t arm_compare_fixed_q31(q31_t *pIn, q31_t *pOut, uint32_t numSamples);
uint32_t arm_calc_2pow(uint32_t guard_bits);
#endif