pima/Trinity-DevPCB-V1.0
1
0
Fork 0
Code Issues Pull Requests Actions Packages Projects Releases Wiki Activity

Trinity Devboard PCB V1.0 Firmware. FreeRTOS is setup and the MCU reads IMU data over SPI fand Magnetometer data over I2C, each with a seperate task. Sensordata is then run though MadgwickAHRS and send over USB as serial packet data to use in trinity visualizer. Bare minimum functionality works and is replicated from the first prototype.

Browse Source
This commit is contained in:
pima
2026-09-13 19:51:03 +02:00
commit 7ee381de58
1630 changed files with 632404 additions and 0 deletions
Download Patch File Download Diff File Expand all files Collapse all files
Drivers/CMSIS/DSP/DSP_Lib_TestSuite/DspLibTest_FVP_A5/RTE/CMSIS/RTX_Config.c
+63
View File
@@ -0,0 +1,63 @@
/*
* Copyright (c) 2013-2017 ARM Limited. All rights reserved.
*
* SPDX-License-Identifier: Apache-2.0
*
* Licensed under the Apache License, Version 2.0 (the License); you may
* not use this file except in compliance with the License.
* You may obtain a copy of the License at
*
* www.apache.org/licenses/LICENSE-2.0
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an AS IS BASIS, WITHOUT
* WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
* See the License for the specific language governing permissions and
* limitations under the License.
*
* -----------------------------------------------------------------------------
*
* $Revision: V5.1.0
*
* Project: CMSIS-RTOS RTX
* Title: RTX Configuration
*
* -----------------------------------------------------------------------------
*/
#include "cmsis_compiler.h"
#include "rtx_os.h"
// OS Idle Thread
__WEAK __NO_RETURN void osRtxIdleThread (void *argument) {
(void)argument;
for (;;) {}
}
// OS Error Callback function
__WEAK uint32_t osRtxErrorNotify (uint32_t code, void *object_id) {
(void)object_id;
switch (code) {
case osRtxErrorStackUnderflow:
// Stack underflow detected for thread (thread_id=object_id)
break;
case osRtxErrorISRQueueOverflow:
// ISR Queue overflow detected when inserting object (object_id)
break;
case osRtxErrorTimerQueueOverflow:
// User Timer Callback Queue overflow detected for timer (timer_id=object_id)
break;
case osRtxErrorClibSpace:
// Standard C/C++ library libspace not available: increase OS_THREAD_LIBSPACE_NUM
break;
case osRtxErrorClibMutex:
// Standard C/C++ library mutex initialization failed
break;
default:
break;
}
for (;;) {}
return 0U;
}
Drivers/CMSIS/DSP/DSP_Lib_TestSuite/DspLibTest_FVP_A5/RTE/CMSIS/RTX_Config.h
+578
View File
@@ -0,0 +1,578 @@
/*
* Copyright (c) 2013-2019 Arm Limited. All rights reserved.
*
* SPDX-License-Identifier: Apache-2.0
*
* Licensed under the Apache License, Version 2.0 (the License); you may
* not use this file except in compliance with the License.
* You may obtain a copy of the License at
*
* www.apache.org/licenses/LICENSE-2.0
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an AS IS BASIS, WITHOUT
* WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
* See the License for the specific language governing permissions and
* limitations under the License.
*
* -----------------------------------------------------------------------------
*
* $Revision: V5.5.0
*
* Project: CMSIS-RTOS RTX
* Title: RTX Configuration definitions
*
* -----------------------------------------------------------------------------
*/
#ifndef RTX_CONFIG_H_
#define RTX_CONFIG_H_
#ifdef _RTE_
#include "RTE_Components.h"
#ifdef RTE_RTX_CONFIG_H
#include RTE_RTX_CONFIG_H
#endif
#endif
//-------- <<< Use Configuration Wizard in Context Menu >>> --------------------
// <h>System Configuration
// =======================
// <o>Global Dynamic Memory size [bytes] <0-1073741824:8>
// <i> Defines the combined global dynamic memory size.
// <i> Default: 4096
#ifndef OS_DYNAMIC_MEM_SIZE
#define OS_DYNAMIC_MEM_SIZE 4096
#endif
// <o>Kernel Tick Frequency [Hz] <1-1000000>
// <i> Defines base time unit for delays and timeouts.
// <i> Default: 1000 (1ms tick)
#ifndef OS_TICK_FREQ
#define OS_TICK_FREQ 1000
#endif
// <e>Round-Robin Thread switching
// <i> Enables Round-Robin Thread switching.
#ifndef OS_ROBIN_ENABLE
#define OS_ROBIN_ENABLE 1
#endif
// <o>Round-Robin Timeout <1-1000>
// <i> Defines how many ticks a thread will execute before a thread switch.
// <i> Default: 5
#ifndef OS_ROBIN_TIMEOUT
#define OS_ROBIN_TIMEOUT 5
#endif
// </e>
// <o>ISR FIFO Queue
// <4=> 4 entries <8=> 8 entries <12=> 12 entries <16=> 16 entries
// <24=> 24 entries <32=> 32 entries <48=> 48 entries <64=> 64 entries
// <96=> 96 entries <128=> 128 entries <196=> 196 entries <256=> 256 entries
// <i> RTOS Functions called from ISR store requests to this buffer.
// <i> Default: 16 entries
#ifndef OS_ISR_FIFO_QUEUE
#define OS_ISR_FIFO_QUEUE 16
#endif
// <q>Object Memory usage counters
// <i> Enables object memory usage counters (requires RTX source variant).
#ifndef OS_OBJ_MEM_USAGE
#define OS_OBJ_MEM_USAGE 0
#endif
// </h>
// <h>Thread Configuration
// =======================
// <e>Object specific Memory allocation
// <i> Enables object specific memory allocation.
#ifndef OS_THREAD_OBJ_MEM
#define OS_THREAD_OBJ_MEM 0
#endif
// <o>Number of user Threads <1-1000>
// <i> Defines maximum number of user threads that can be active at the same time.
// <i> Applies to user threads with system provided memory for control blocks.
#ifndef OS_THREAD_NUM
#define OS_THREAD_NUM 1
#endif
// <o>Number of user Threads with default Stack size <0-1000>
// <i> Defines maximum number of user threads with default stack size.
// <i> Applies to user threads with zero stack size specified.
#ifndef OS_THREAD_DEF_STACK_NUM
#define OS_THREAD_DEF_STACK_NUM 0
#endif
// <o>Total Stack size [bytes] for user Threads with user-provided Stack size <0-1073741824:8>
// <i> Defines the combined stack size for user threads with user-provided stack size.
// <i> Applies to user threads with user-provided stack size and system provided memory for stack.
// <i> Default: 0
#ifndef OS_THREAD_USER_STACK_SIZE
#define OS_THREAD_USER_STACK_SIZE 0
#endif
// </e>
// <o>Default Thread Stack size [bytes] <96-1073741824:8>
// <i> Defines stack size for threads with zero stack size specified.
// <i> Default: 256
#ifndef OS_STACK_SIZE
#define OS_STACK_SIZE 512
#endif
// <o>Idle Thread Stack size [bytes] <72-1073741824:8>
// <i> Defines stack size for Idle thread.
// <i> Default: 256
#ifndef OS_IDLE_THREAD_STACK_SIZE
#define OS_IDLE_THREAD_STACK_SIZE 512
#endif
// <o>Idle Thread TrustZone Module Identifier
// <i> Defines TrustZone Thread Context Management Identifier.
// <i> Applies only to cores with TrustZone technology.
// <i> Default: 0 (not used)
#ifndef OS_IDLE_THREAD_TZ_MOD_ID
#define OS_IDLE_THREAD_TZ_MOD_ID 0
#endif
// <q>Stack overrun checking
// <i> Enables stack overrun check at thread switch.
// <i> Enabling this option increases slightly the execution time of a thread switch.
#ifndef OS_STACK_CHECK
#define OS_STACK_CHECK 1
#endif
// <q>Stack usage watermark
// <i> Initializes thread stack with watermark pattern for analyzing stack usage.
// <i> Enabling this option increases significantly the execution time of thread creation.
#ifndef OS_STACK_WATERMARK
#define OS_STACK_WATERMARK 0
#endif
// <o>Processor mode for Thread execution
// <0=> Unprivileged mode
// <1=> Privileged mode
// <i> Default: Privileged mode
#ifndef OS_PRIVILEGE_MODE
#define OS_PRIVILEGE_MODE 1
#endif
// </h>
// <h>Timer Configuration
// ======================
// <e>Object specific Memory allocation
// <i> Enables object specific memory allocation.
#ifndef OS_TIMER_OBJ_MEM
#define OS_TIMER_OBJ_MEM 0
#endif
// <o>Number of Timer objects <1-1000>
// <i> Defines maximum number of objects that can be active at the same time.
// <i> Applies to objects with system provided memory for control blocks.
#ifndef OS_TIMER_NUM
#define OS_TIMER_NUM 1
#endif
// </e>
// <o>Timer Thread Priority
// <8=> Low
// <16=> Below Normal <24=> Normal <32=> Above Normal
// <40=> High
// <48=> Realtime
// <i> Defines priority for timer thread
// <i> Default: High
#ifndef OS_TIMER_THREAD_PRIO
#define OS_TIMER_THREAD_PRIO 40
#endif
// <o>Timer Thread Stack size [bytes] <0-1073741824:8>
// <i> Defines stack size for Timer thread.
// <i> May be set to 0 when timers are not used.
// <i> Default: 256
#ifndef OS_TIMER_THREAD_STACK_SIZE
#define OS_TIMER_THREAD_STACK_SIZE 256
#endif
// <o>Timer Thread TrustZone Module Identifier
// <i> Defines TrustZone Thread Context Management Identifier.
// <i> Applies only to cores with TrustZone technology.
// <i> Default: 0 (not used)
#ifndef OS_TIMER_THREAD_TZ_MOD_ID
#define OS_TIMER_THREAD_TZ_MOD_ID 0
#endif
// <o>Timer Callback Queue entries <0-256>
// <i> Number of concurrent active timer callback functions.
// <i> May be set to 0 when timers are not used.
// <i> Default: 4
#ifndef OS_TIMER_CB_QUEUE
#define OS_TIMER_CB_QUEUE 4
#endif
// </h>
// <h>Event Flags Configuration
// ============================
// <e>Object specific Memory allocation
// <i> Enables object specific memory allocation.
#ifndef OS_EVFLAGS_OBJ_MEM
#define OS_EVFLAGS_OBJ_MEM 0
#endif
// <o>Number of Event Flags objects <1-1000>
// <i> Defines maximum number of objects that can be active at the same time.
// <i> Applies to objects with system provided memory for control blocks.
#ifndef OS_EVFLAGS_NUM
#define OS_EVFLAGS_NUM 1
#endif
// </e>
// </h>
// <h>Mutex Configuration
// ======================
// <e>Object specific Memory allocation
// <i> Enables object specific memory allocation.
#ifndef OS_MUTEX_OBJ_MEM
#define OS_MUTEX_OBJ_MEM 0
#endif
// <o>Number of Mutex objects <1-1000>
// <i> Defines maximum number of objects that can be active at the same time.
// <i> Applies to objects with system provided memory for control blocks.
#ifndef OS_MUTEX_NUM
#define OS_MUTEX_NUM 1
#endif
// </e>
// </h>
// <h>Semaphore Configuration
// ==========================
// <e>Object specific Memory allocation
// <i> Enables object specific memory allocation.
#ifndef OS_SEMAPHORE_OBJ_MEM
#define OS_SEMAPHORE_OBJ_MEM 0
#endif
// <o>Number of Semaphore objects <1-1000>
// <i> Defines maximum number of objects that can be active at the same time.
// <i> Applies to objects with system provided memory for control blocks.
#ifndef OS_SEMAPHORE_NUM
#define OS_SEMAPHORE_NUM 1
#endif
// </e>
// </h>
// <h>Memory Pool Configuration
// ============================
// <e>Object specific Memory allocation
// <i> Enables object specific memory allocation.
#ifndef OS_MEMPOOL_OBJ_MEM
#define OS_MEMPOOL_OBJ_MEM 0
#endif
// <o>Number of Memory Pool objects <1-1000>
// <i> Defines maximum number of objects that can be active at the same time.
// <i> Applies to objects with system provided memory for control blocks.
#ifndef OS_MEMPOOL_NUM
#define OS_MEMPOOL_NUM 1
#endif
// <o>Data Storage Memory size [bytes] <0-1073741824:8>
// <i> Defines the combined data storage memory size.
// <i> Applies to objects with system provided memory for data storage.
// <i> Default: 0
#ifndef OS_MEMPOOL_DATA_SIZE
#define OS_MEMPOOL_DATA_SIZE 0
#endif
// </e>
// </h>
// <h>Message Queue Configuration
// ==============================
// <e>Object specific Memory allocation
// <i> Enables object specific memory allocation.
#ifndef OS_MSGQUEUE_OBJ_MEM
#define OS_MSGQUEUE_OBJ_MEM 0
#endif
// <o>Number of Message Queue objects <1-1000>
// <i> Defines maximum number of objects that can be active at the same time.
// <i> Applies to objects with system provided memory for control blocks.
#ifndef OS_MSGQUEUE_NUM
#define OS_MSGQUEUE_NUM 1
#endif
// <o>Data Storage Memory size [bytes] <0-1073741824:8>
// <i> Defines the combined data storage memory size.
// <i> Applies to objects with system provided memory for data storage.
// <i> Default: 0
#ifndef OS_MSGQUEUE_DATA_SIZE
#define OS_MSGQUEUE_DATA_SIZE 0
#endif
// </e>
// </h>
// <h>Event Recorder Configuration
// ===============================
// <e>Global Initialization
// <i> Initialize Event Recorder during 'osKernelInitialize'.
#ifndef OS_EVR_INIT
#define OS_EVR_INIT 0
#endif
// <q>Start recording
// <i> Start event recording after initialization.
#ifndef OS_EVR_START
#define OS_EVR_START 1
#endif
// <h>Global Event Filter Setup
// <i> Initial recording level applied to all components.
// <o.0>Error events
// <o.1>API function call events
// <o.2>Operation events
// <o.3>Detailed operation events
// </h>
#ifndef OS_EVR_LEVEL
#define OS_EVR_LEVEL 0x00U
#endif
// <h>RTOS Event Filter Setup
// <i> Recording levels for RTX components.
// <i> Only applicable if events for the respective component are generated.
// <h>Memory Management
// <i> Recording level for Memory Management events.
// <o.0>Error events
// <o.1>API function call events
// <o.2>Operation events
// <o.3>Detailed operation events
// </h>
#ifndef OS_EVR_MEMORY_LEVEL
#define OS_EVR_MEMORY_LEVEL 0x01U
#endif
// <h>Kernel
// <i> Recording level for Kernel events.
// <o.0>Error events
// <o.1>API function call events
// <o.2>Operation events
// <o.3>Detailed operation events
// </h>
#ifndef OS_EVR_KERNEL_LEVEL
#define OS_EVR_KERNEL_LEVEL 0x01U
#endif
// <h>Thread
// <i> Recording level for Thread events.
// <o.0>Error events
// <o.1>API function call events
// <o.2>Operation events
// <o.3>Detailed operation events
// </h>
#ifndef OS_EVR_THREAD_LEVEL
#define OS_EVR_THREAD_LEVEL 0x05U
#endif
// <h>Generic Wait
// <i> Recording level for Generic Wait events.
// <o.0>Error events
// <o.1>API function call events
// <o.2>Operation events
// <o.3>Detailed operation events
// </h>
#ifndef OS_EVR_WAIT_LEVEL
#define OS_EVR_WAIT_LEVEL 0x01U
#endif
// <h>Thread Flags
// <i> Recording level for Thread Flags events.
// <o.0>Error events
// <o.1>API function call events
// <o.2>Operation events
// <o.3>Detailed operation events
// </h>
#ifndef OS_EVR_THFLAGS_LEVEL
#define OS_EVR_THFLAGS_LEVEL 0x01U
#endif
// <h>Event Flags
// <i> Recording level for Event Flags events.
// <o.0>Error events
// <o.1>API function call events
// <o.2>Operation events
// <o.3>Detailed operation events
// </h>
#ifndef OS_EVR_EVFLAGS_LEVEL
#define OS_EVR_EVFLAGS_LEVEL 0x01U
#endif
// <h>Timer
// <i> Recording level for Timer events.
// <o.0>Error events
// <o.1>API function call events
// <o.2>Operation events
// <o.3>Detailed operation events
// </h>
#ifndef OS_EVR_TIMER_LEVEL
#define OS_EVR_TIMER_LEVEL 0x01U
#endif
// <h>Mutex
// <i> Recording level for Mutex events.
// <o.0>Error events
// <o.1>API function call events
// <o.2>Operation events
// <o.3>Detailed operation events
// </h>
#ifndef OS_EVR_MUTEX_LEVEL
#define OS_EVR_MUTEX_LEVEL 0x01U
#endif
// <h>Semaphore
// <i> Recording level for Semaphore events.
// <o.0>Error events
// <o.1>API function call events
// <o.2>Operation events
// <o.3>Detailed operation events
// </h>
#ifndef OS_EVR_SEMAPHORE_LEVEL
#define OS_EVR_SEMAPHORE_LEVEL 0x01U
#endif
// <h>Memory Pool
// <i> Recording level for Memory Pool events.
// <o.0>Error events
// <o.1>API function call events
// <o.2>Operation events
// <o.3>Detailed operation events
// </h>
#ifndef OS_EVR_MEMPOOL_LEVEL
#define OS_EVR_MEMPOOL_LEVEL 0x01U
#endif
// <h>Message Queue
// <i> Recording level for Message Queue events.
// <o.0>Error events
// <o.1>API function call events
// <o.2>Operation events
// <o.3>Detailed operation events
// </h>
#ifndef OS_EVR_MSGQUEUE_LEVEL
#define OS_EVR_MSGQUEUE_LEVEL 0x01U
#endif
// </h>
// </e>
// <h>RTOS Event Generation
// <i> Enables event generation for RTX components (requires RTX source variant).
// <q>Memory Management
// <i> Enables Memory Management event generation.
#ifndef OS_EVR_MEMORY
#define OS_EVR_MEMORY 1
#endif
// <q>Kernel
// <i> Enables Kernel event generation.
#ifndef OS_EVR_KERNEL
#define OS_EVR_KERNEL 1
#endif
// <q>Thread
// <i> Enables Thread event generation.
#ifndef OS_EVR_THREAD
#define OS_EVR_THREAD 1
#endif
// <q>Generic Wait
// <i> Enables Generic Wait event generation.
#ifndef OS_EVR_WAIT
#define OS_EVR_WAIT 1
#endif
// <q>Thread Flags
// <i> Enables Thread Flags event generation.
#ifndef OS_EVR_THFLAGS
#define OS_EVR_THFLAGS 1
#endif
// <q>Event Flags
// <i> Enables Event Flags event generation.
#ifndef OS_EVR_EVFLAGS
#define OS_EVR_EVFLAGS 1
#endif
// <q>Timer
// <i> Enables Timer event generation.
#ifndef OS_EVR_TIMER
#define OS_EVR_TIMER 1
#endif
// <q>Mutex
// <i> Enables Mutex event generation.
#ifndef OS_EVR_MUTEX
#define OS_EVR_MUTEX 1
#endif
// <q>Semaphore
// <i> Enables Semaphore event generation.
#ifndef OS_EVR_SEMAPHORE
#define OS_EVR_SEMAPHORE 1
#endif
// <q>Memory Pool
// <i> Enables Memory Pool event generation.
#ifndef OS_EVR_MEMPOOL
#define OS_EVR_MEMPOOL 1
#endif
// <q>Message Queue
// <i> Enables Message Queue event generation.
#ifndef OS_EVR_MSGQUEUE
#define OS_EVR_MSGQUEUE 1
#endif
// </h>
// </h>
// Number of Threads which use standard C/C++ library libspace
// (when thread specific memory allocation is not used).
#if (OS_THREAD_OBJ_MEM == 0)
#define OS_THREAD_LIBSPACE_NUM 4
#else
#define OS_THREAD_LIBSPACE_NUM OS_THREAD_NUM
#endif
//------------- <<< end of configuration section >>> ---------------------------
#endif // RTX_CONFIG_H_
Drivers/CMSIS/DSP/DSP_Lib_TestSuite/DspLibTest_FVP_A5/RTE/CMSIS/handlers.c
+153
View File
@@ -0,0 +1,153 @@
/*
* Copyright (c) 2013-2017 ARM Limited. All rights reserved.
*
* SPDX-License-Identifier: Apache-2.0
*
* Licensed under the Apache License, Version 2.0 (the License); you may
* not use this file except in compliance with the License.
* You may obtain a copy of the License at
*
* www.apache.org/licenses/LICENSE-2.0
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an AS IS BASIS, WITHOUT
* WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
* See the License for the specific language governing permissions and
* limitations under the License.
*
* -----------------------------------------------------------------------------
*
* Project: CMSIS-RTOS RTX
* Title: Exception handlers (C functions)
*
* -----------------------------------------------------------------------------
*/
#include "RTE_Components.h"
#include CMSIS_device_header
//Fault Status Register (IFSR/DFSR) definitions
#define FSR_ALIGNMENT_FAULT 0x01 //DFSR only. Fault on first lookup
#define FSR_INSTRUCTION_CACHE_MAINTENANCE 0x04 //DFSR only - async/external
#define FSR_SYNC_EXT_TTB_WALK_FIRST 0x0c //sync/external
#define FSR_SYNC_EXT_TTB_WALK_SECOND 0x0e //sync/external
#define FSR_SYNC_PARITY_TTB_WALK_FIRST 0x1c //sync/external
#define FSR_SYNC_PARITY_TTB_WALK_SECOND 0x1e //sync/external
#define FSR_TRANSLATION_FAULT_FIRST 0x05 //MMU Fault - internal
#define FSR_TRANSLATION_FAULT_SECOND 0x07 //MMU Fault - internal
#define FSR_ACCESS_FLAG_FAULT_FIRST 0x03 //MMU Fault - internal
#define FSR_ACCESS_FLAG_FAULT_SECOND 0x06 //MMU Fault - internal
#define FSR_DOMAIN_FAULT_FIRST 0x09 //MMU Fault - internal
#define FSR_DOMAIN_FAULT_SECOND 0x0b //MMU Fault - internal
#define FSR_PERMISSION_FAULT_FIRST 0x0f //MMU Fault - internal
#define FSR_PERMISSION_FAULT_SECOND 0x0d //MMU Fault - internal
#define FSR_DEBUG_EVENT 0x02 //internal
#define FSR_SYNC_EXT_ABORT 0x08 //sync/external
#define FSR_TLB_CONFLICT_ABORT 0x10 //sync/external
#define FSR_LOCKDOWN 0x14 //internal
#define FSR_COPROCESSOR_ABORT 0x1a //internal
#define FSR_SYNC_PARITY_ERROR 0x19 //sync/external
#define FSR_ASYNC_EXTERNAL_ABORT 0x16 //DFSR only - async/external
#define FSR_ASYNC_PARITY_ERROR 0x18 //DFSR only - async/external
void CDAbtHandler(uint32_t DFSR, uint32_t DFAR, uint32_t LR) {
uint32_t FS = (DFSR & (1 << 10)) >> 6 | (DFSR & 0x0f); //Store Fault Status
switch(FS) {
//Synchronous parity errors - retry
case FSR_SYNC_PARITY_ERROR:
case FSR_SYNC_PARITY_TTB_WALK_FIRST:
case FSR_SYNC_PARITY_TTB_WALK_SECOND:
return;
//Your code here. Value in DFAR is invalid for some fault statuses.
case FSR_ALIGNMENT_FAULT:
case FSR_INSTRUCTION_CACHE_MAINTENANCE:
case FSR_SYNC_EXT_TTB_WALK_FIRST:
case FSR_SYNC_EXT_TTB_WALK_SECOND:
case FSR_TRANSLATION_FAULT_FIRST:
case FSR_TRANSLATION_FAULT_SECOND:
case FSR_ACCESS_FLAG_FAULT_FIRST:
case FSR_ACCESS_FLAG_FAULT_SECOND:
case FSR_DOMAIN_FAULT_FIRST:
case FSR_DOMAIN_FAULT_SECOND:
case FSR_PERMISSION_FAULT_FIRST:
case FSR_PERMISSION_FAULT_SECOND:
case FSR_DEBUG_EVENT:
case FSR_SYNC_EXT_ABORT:
case FSR_TLB_CONFLICT_ABORT:
case FSR_LOCKDOWN:
case FSR_COPROCESSOR_ABORT:
case FSR_ASYNC_EXTERNAL_ABORT: //DFAR invalid
case FSR_ASYNC_PARITY_ERROR: //DFAR invalid
default:
while(1);
}
}
void CPAbtHandler(uint32_t IFSR, uint32_t IFAR, uint32_t LR) {
uint32_t FS = (IFSR & (1 << 10)) >> 6 | (IFSR & 0x0f); //Store Fault Status
switch(FS) {
//Synchronous parity errors - retry
case FSR_SYNC_PARITY_ERROR:
case FSR_SYNC_PARITY_TTB_WALK_FIRST:
case FSR_SYNC_PARITY_TTB_WALK_SECOND:
return;
//Your code here. Value in IFAR is invalid for some fault statuses.
case FSR_SYNC_EXT_TTB_WALK_FIRST:
case FSR_SYNC_EXT_TTB_WALK_SECOND:
case FSR_TRANSLATION_FAULT_FIRST:
case FSR_TRANSLATION_FAULT_SECOND:
case FSR_ACCESS_FLAG_FAULT_FIRST:
case FSR_ACCESS_FLAG_FAULT_SECOND:
case FSR_DOMAIN_FAULT_FIRST:
case FSR_DOMAIN_FAULT_SECOND:
case FSR_PERMISSION_FAULT_FIRST:
case FSR_PERMISSION_FAULT_SECOND:
case FSR_DEBUG_EVENT: //IFAR invalid
case FSR_SYNC_EXT_ABORT:
case FSR_TLB_CONFLICT_ABORT:
case FSR_LOCKDOWN:
case FSR_COPROCESSOR_ABORT:
default:
while(1);
}
}
//returns amount to decrement lr by
//this will be 0 when we have emulated the instruction and want to execute the next instruction
//this will be 2 when we have performed some maintenance and want to retry the instruction in Thumb (state == 2)
//this will be 4 when we have performed some maintenance and want to retry the instruction in ARM (state == 4)
uint32_t CUndefHandler(uint32_t opcode, uint32_t state, uint32_t LR) {
const int THUMB = 2;
const int ARM = 4;
//Lazy VFP/NEON initialisation and switching
// (ARM ARM section A7.5) VFP data processing instruction?
// (ARM ARM section A7.6) VFP/NEON register load/store instruction?
// (ARM ARM section A7.8) VFP/NEON register data transfer instruction?
// (ARM ARM section A7.9) VFP/NEON 64-bit register data transfer instruction?
if ((state == ARM && ((opcode & 0x0C000000) >> 26 == 0x03)) ||
(state == THUMB && ((opcode & 0xEC000000) >> 26 == 0x3B))) {
if (((opcode & 0x00000E00) >> 9) == 5) {
__FPU_Enable();
return state;
}
}
// (ARM ARM section A7.4) NEON data processing instruction?
if ((state == ARM && ((opcode & 0xFE000000) >> 24 == 0xF2)) ||
(state == THUMB && ((opcode & 0xEF000000) >> 24 == 0xEF)) ||
// (ARM ARM section A7.7) NEON load/store instruction?
(state == ARM && ((opcode >> 24) == 0xF4)) ||
(state == THUMB && ((opcode >> 24) == 0xF9))) {
__FPU_Enable();
return state;
}
//Add code here for other Undef cases
while(1);
}
Drivers/CMSIS/DSP/DSP_Lib_TestSuite/DspLibTest_FVP_A5/RTE/Device/ARMCA5/mem_ARMCA5.h
+94
View File
@@ -0,0 +1,94 @@
/**************************************************************************//**
* @file mem_ARMCA5.h
* @brief Memory base and size definitions (used in scatter file)
* @version V1.00
* @date 10. January 2018
*
* @note
*
******************************************************************************/
/*
* Copyright (c) 2009-2018 Arm Limited. All rights reserved.
*
* SPDX-License-Identifier: Apache-2.0
*
* Licensed under the Apache License, Version 2.0 (the License); you may
* not use this file except in compliance with the License.
* You may obtain a copy of the License at
*
* www.apache.org/licenses/LICENSE-2.0
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an AS IS BASIS, WITHOUT
* WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
* See the License for the specific language governing permissions and
* limitations under the License.
*/
#ifndef __MEM_ARMCA5_H
#define __MEM_ARMCA5_H
/*----------------------------------------------------------------------------
User Stack & Heap size definition
*----------------------------------------------------------------------------*/
/*
//-------- <<< Use Configuration Wizard in Context Menu >>> ------------------
*/
/*--------------------- ROM Configuration ------------------------------------
//
// <h> ROM Configuration
// <o0> ROM Base Address <0x0-0xFFFFFFFF:8>
// <o1> ROM Size (in Bytes) <0x0-0xFFFFFFFF:8>
// </h>
*----------------------------------------------------------------------------*/
#define __ROM_BASE 0x80000000
#define __ROM_SIZE 0x00200000
/*--------------------- RAM Configuration -----------------------------------
// <h> RAM Configuration
// <o0> RAM Base Address <0x0-0xFFFFFFFF:8>
// <o1> RAM Total Size (in Bytes) <0x0-0xFFFFFFFF:8>
// <o2> RW_DATA Size (in Bytes) <0x0-0xFFFFFFFF:8>
// <o3> ZI_DATA Size (in Bytes) <0x0-0xFFFFFFFF:8>
// <h> Stack / Heap Configuration
// <o4> Stack Size (in Bytes) <0x0-0xFFFFFFFF:8>
// <o5> Heap Size (in Bytes) <0x0-0xFFFFFFFF:8>
// <h> Exceptional Modes
// <o6> UND Stack Size (in Bytes) <0x0-0xFFFFFFFF:8>
// <o7> ABT Stack Size (in Bytes) <0x0-0xFFFFFFFF:8>
// <o8> SVC Stack Size (in Bytes) <0x0-0xFFFFFFFF:8>
// <o9> IRQ Stack Size (in Bytes) <0x0-0xFFFFFFFF:8>
// <o10> FIQ Stack Size (in Bytes) <0x0-0xFFFFFFFF:8>
// </h>
// </h>
// </h>
*----------------------------------------------------------------------------*/
#define __RAM_BASE 0x80200000
#define __RAM_SIZE 0x00200000
#define __RW_DATA_SIZE 0x00100000
#define __ZI_DATA_SIZE 0x000F0000
#define __STACK_SIZE 0x00001000
#define __HEAP_SIZE 0x00008000
#define __UND_STACK_SIZE 0x00000100
#define __ABT_STACK_SIZE 0x00000100
#define __SVC_STACK_SIZE 0x00000100
#define __IRQ_STACK_SIZE 0x00000100
#define __FIQ_STACK_SIZE 0x00000100
/*----------------------------------------------------------------------------*/
/*--------------------- TTB Configuration ------------------------------------
//
// <h> TTB Configuration
// <o0> TTB Base Address <0x0-0xFFFFFFFF:8>
// <o1> TTB Size (in Bytes) <0x0-0xFFFFFFFF:8>
// </h>
*----------------------------------------------------------------------------*/
#define __TTB_BASE 0x80500000
#define __TTB_SIZE 0x00004000
#endif /* __MEM_ARMCA5_H */
Drivers/CMSIS/DSP/DSP_Lib_TestSuite/DspLibTest_FVP_A5/RTE/Device/ARMCA5/mmu_ARMCA5.c
+235
View File
@@ -0,0 +1,235 @@
/**************************************************************************//**
* @file mmu_ARMCA5.c
* @brief MMU Configuration for ARM Cortex-A5 Device Series
* @version V1.1.0
* @date 23. November 2018
*
* @note
*
******************************************************************************/
/*
* Copyright (c) 2009-2018 Arm Limited. All rights reserved.
*
* SPDX-License-Identifier: Apache-2.0
*
* Licensed under the Apache License, Version 2.0 (the License); you may
* not use this file except in compliance with the License.
* You may obtain a copy of the License at
*
* www.apache.org/licenses/LICENSE-2.0
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an AS IS BASIS, WITHOUT
* WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
* See the License for the specific language governing permissions and
* limitations under the License.
*/
/* Memory map description from: DUI0447G_v2m_p1_trm.pdf 4.2.2 ARM Cortex-A Series memory map
Memory Type
0xffffffff |--------------------------| ------------
| FLAG SYNC | Device Memory
0xfffff000 |--------------------------| ------------
| Fault | Fault
0xfff00000 |--------------------------| ------------
| | Normal
| |
| Daughterboard |
| memory |
| |
0x80505000 |--------------------------| ------------
|TTB (L2 Sync Flags ) 4k | Normal
0x80504C00 |--------------------------| ------------
|TTB (L2 Peripherals-B) 16k| Normal
0x80504800 |--------------------------| ------------
|TTB (L2 Peripherals-A) 16k| Normal
0x80504400 |--------------------------| ------------
|TTB (L2 Priv Periphs) 4k | Normal
0x80504000 |--------------------------| ------------
| TTB (L1 Descriptors) | Normal
0x80500000 |--------------------------| ------------
| Heap | Normal
|--------------------------| ------------
| Stack | Normal
0x80400000 |--------------------------| ------------
| ZI Data | Normal
0x80300000 |--------------------------| ------------
| RW Data | Normal
0x80200000 |--------------------------| ------------
| RO Data | Normal
|--------------------------| ------------
| RO Code | USH Normal
0x80000000 |--------------------------| ------------
| Daughterboard | Fault
| HSB AXI buses |
0x40000000 |--------------------------| ------------
| Daughterboard | Fault
| test chips peripherals |
0x2c002000 |--------------------------| ------------
| Private Address | Device Memory
0x2c000000 |--------------------------| ------------
| Daughterboard | Fault
| test chips peripherals |
0x20000000 |--------------------------| ------------
| Peripherals | Device Memory RW/RO
| | & Fault
0x00000000 |--------------------------|
*/
// L1 Cache info and restrictions about architecture of the caches (CCSIR register):
// Write-Through support *not* available
// Write-Back support available.
// Read allocation support available.
// Write allocation support available.
//Note: You should use the Shareable attribute carefully.
//For cores without coherency logic (such as SCU) marking a region as shareable forces the processor to not cache that region regardless of the inner cache settings.
//Cortex-A versions of RTX use LDREX/STREX instructions relying on Local monitors. Local monitors will be used only when the region gets cached, regions that are not cached will use the Global Monitor.
//Some Cortex-A implementations do not include Global Monitors, so wrongly setting the attribute Shareable may cause STREX to fail.
//Recall: When the Shareable attribute is applied to a memory region that is not Write-Back, Normal memory, data held in this region is treated as Non-cacheable.
//When SMP bit = 0, Inner WB/WA Cacheable Shareable attributes are treated as Non-cacheable.
//When SMP bit = 1, Inner WB/WA Cacheable Shareable attributes are treated as Cacheable.
//Following MMU configuration is expected
//SCTLR.AFE == 1 (Simplified access permissions model - AP[2:1] define access permissions, AP[0] is an access flag)
//SCTLR.TRE == 0 (TEX remap disabled, so memory type and attributes are described directly by bits in the descriptor)
//Domain 0 is always the Client domain
//Descriptors should place all memory in domain 0
#include "ARMCA5.h"
// L2 table pointers
//----------------------------------------
#define PRIVATE_TABLE_L2_BASE_4k (0x80504000) //Map 4k Private Address space
#define SYNC_FLAGS_TABLE_L2_BASE_4k (0x80504C00) //Map 4k Flag synchronization
#define PERIPHERAL_A_TABLE_L2_BASE_64k (0x80504400) //Map 64k Peripheral #1 0x1C000000 - 0x1C00FFFFF
#define PERIPHERAL_B_TABLE_L2_BASE_64k (0x80504800) //Map 64k Peripheral #2 0x1C100000 - 0x1C1FFFFFF
//--------------------- PERIPHERALS -------------------
#define PERIPHERAL_A_FAULT (0x00000000 + 0x1c000000) //0x1C000000-0x1C00FFFF (1M)
#define PERIPHERAL_B_FAULT (0x00100000 + 0x1c000000) //0x1C100000-0x1C10FFFF (1M)
//--------------------- SYNC FLAGS --------------------
#define FLAG_SYNC 0xFFFFF000
#define F_SYNC_BASE 0xFFF00000 //1M aligned
//Import symbols from linker
extern uint32_t Image$$VECTORS$$Base;
extern uint32_t Image$$RW_DATA$$Base;
extern uint32_t Image$$ZI_DATA$$Base;
extern uint32_t Image$$TTB$$ZI$$Base;
static uint32_t Sect_Normal; //outer & inner wb/wa, non-shareable, executable, rw, domain 0, base addr 0
static uint32_t Sect_Normal_Cod; //outer & inner wb/wa, non-shareable, executable, ro, domain 0, base addr 0
static uint32_t Sect_Normal_RO; //as Sect_Normal_Cod, but not executable
static uint32_t Sect_Normal_RW; //as Sect_Normal_Cod, but writeable and not executable
static uint32_t Sect_Device_RO; //device, non-shareable, non-executable, ro, domain 0, base addr 0
static uint32_t Sect_Device_RW; //as Sect_Device_RO, but writeable
/* Define global descriptors */
static uint32_t Page_L1_4k = 0x0; //generic
static uint32_t Page_L1_64k = 0x0; //generic
static uint32_t Page_4k_Device_RW; //Shared device, not executable, rw, domain 0
static uint32_t Page_64k_Device_RW; //Shared device, not executable, rw, domain 0
void MMU_CreateTranslationTable(void)
{
mmu_region_attributes_Type region;
//Create 4GB of faulting entries
MMU_TTSection (&Image$$TTB$$ZI$$Base, 0, 4096, DESCRIPTOR_FAULT);
/*
* Generate descriptors. Refer to core_ca.h to get information about attributes
*
*/
//Create descriptors for Vectors, RO, RW, ZI sections
section_normal(Sect_Normal, region);
section_normal_cod(Sect_Normal_Cod, region);
section_normal_ro(Sect_Normal_RO, region);
section_normal_rw(Sect_Normal_RW, region);
//Create descriptors for peripherals
section_device_ro(Sect_Device_RO, region);
section_device_rw(Sect_Device_RW, region);
//Create descriptors for 64k pages
page64k_device_rw(Page_L1_64k, Page_64k_Device_RW, region);
//Create descriptors for 4k pages
page4k_device_rw(Page_L1_4k, Page_4k_Device_RW, region);
/*
* Define MMU flat-map regions and attributes
*
*/
//Define Image
MMU_TTSection (&Image$$TTB$$ZI$$Base, (uint32_t)&Image$$VECTORS$$Base, 2, Sect_Normal_Cod);
MMU_TTSection (&Image$$TTB$$ZI$$Base, (uint32_t)&Image$$RW_DATA$$Base, 1, Sect_Normal_RW);
MMU_TTSection (&Image$$TTB$$ZI$$Base, (uint32_t)&Image$$ZI_DATA$$Base, 1, Sect_Normal_RW);
//all DRAM executable, rw, cacheable - applications may choose to divide memory into ro executable
MMU_TTSection (&Image$$TTB$$ZI$$Base, (uint32_t)&Image$$TTB$$ZI$$Base, 2043, Sect_Normal);
//--------------------- PERIPHERALS -------------------
MMU_TTSection (&Image$$TTB$$ZI$$Base, VE_A5_MP_FLASH_BASE0 , 64, Sect_Device_RO);
MMU_TTSection (&Image$$TTB$$ZI$$Base, VE_A5_MP_FLASH_BASE1 , 64, Sect_Device_RO);
MMU_TTSection (&Image$$TTB$$ZI$$Base, VE_A5_MP_SRAM_BASE , 64, Sect_Device_RW);
MMU_TTSection (&Image$$TTB$$ZI$$Base, VE_A5_MP_VRAM_BASE , 32, Sect_Device_RW);
MMU_TTSection (&Image$$TTB$$ZI$$Base, VE_A5_MP_ETHERNET_BASE , 16, Sect_Device_RW);
MMU_TTSection (&Image$$TTB$$ZI$$Base, VE_A5_MP_USB_BASE , 16, Sect_Device_RW);
// Create (16 * 64k)=1MB faulting entries to cover peripheral range 0x1C000000-0x1C00FFFF
MMU_TTPage64k(&Image$$TTB$$ZI$$Base, PERIPHERAL_A_FAULT , 16, Page_L1_64k, (uint32_t *)PERIPHERAL_A_TABLE_L2_BASE_64k, DESCRIPTOR_FAULT);
// Define peripheral range 0x1C000000-0x1C00FFFF
MMU_TTPage64k(&Image$$TTB$$ZI$$Base, VE_A5_MP_DAP_BASE , 1, Page_L1_64k, (uint32_t *)PERIPHERAL_A_TABLE_L2_BASE_64k, Page_64k_Device_RW);
MMU_TTPage64k(&Image$$TTB$$ZI$$Base, VE_A5_MP_SYSTEM_REG_BASE, 1, Page_L1_64k, (uint32_t *)PERIPHERAL_A_TABLE_L2_BASE_64k, Page_64k_Device_RW);
MMU_TTPage64k(&Image$$TTB$$ZI$$Base, VE_A5_MP_SERIAL_BASE , 1, Page_L1_64k, (uint32_t *)PERIPHERAL_A_TABLE_L2_BASE_64k, Page_64k_Device_RW);
MMU_TTPage64k(&Image$$TTB$$ZI$$Base, VE_A5_MP_AACI_BASE , 1, Page_L1_64k, (uint32_t *)PERIPHERAL_A_TABLE_L2_BASE_64k, Page_64k_Device_RW);
MMU_TTPage64k(&Image$$TTB$$ZI$$Base, VE_A5_MP_MMCI_BASE , 1, Page_L1_64k, (uint32_t *)PERIPHERAL_A_TABLE_L2_BASE_64k, Page_64k_Device_RW);
MMU_TTPage64k(&Image$$TTB$$ZI$$Base, VE_A5_MP_KMI0_BASE , 2, Page_L1_64k, (uint32_t *)PERIPHERAL_A_TABLE_L2_BASE_64k, Page_64k_Device_RW);
MMU_TTPage64k(&Image$$TTB$$ZI$$Base, VE_A5_MP_UART_BASE , 4, Page_L1_64k, (uint32_t *)PERIPHERAL_A_TABLE_L2_BASE_64k, Page_64k_Device_RW);
MMU_TTPage64k(&Image$$TTB$$ZI$$Base, VE_A5_MP_WDT_BASE , 1, Page_L1_64k, (uint32_t *)PERIPHERAL_A_TABLE_L2_BASE_64k, Page_64k_Device_RW);
// Create (16 * 64k)=1MB faulting entries to cover peripheral range 0x1C100000-0x1C10FFFF
MMU_TTPage64k(&Image$$TTB$$ZI$$Base, PERIPHERAL_B_FAULT , 16, Page_L1_64k, (uint32_t *)PERIPHERAL_B_TABLE_L2_BASE_64k, DESCRIPTOR_FAULT);
// Define peripheral range 0x1C100000-0x1C10FFFF
MMU_TTPage64k(&Image$$TTB$$ZI$$Base, VE_A5_MP_TIMER_BASE , 2, Page_L1_64k, (uint32_t *)PERIPHERAL_B_TABLE_L2_BASE_64k, Page_64k_Device_RW);
MMU_TTPage64k(&Image$$TTB$$ZI$$Base, VE_A5_MP_DVI_BASE , 1, Page_L1_64k, (uint32_t *)PERIPHERAL_B_TABLE_L2_BASE_64k, Page_64k_Device_RW);
MMU_TTPage64k(&Image$$TTB$$ZI$$Base, VE_A5_MP_RTC_BASE , 1, Page_L1_64k, (uint32_t *)PERIPHERAL_B_TABLE_L2_BASE_64k, Page_64k_Device_RW);
MMU_TTPage64k(&Image$$TTB$$ZI$$Base, VE_A5_MP_UART4_BASE , 1, Page_L1_64k, (uint32_t *)PERIPHERAL_B_TABLE_L2_BASE_64k, Page_64k_Device_RW);
MMU_TTPage64k(&Image$$TTB$$ZI$$Base, VE_A5_MP_CLCD_BASE , 1, Page_L1_64k, (uint32_t *)PERIPHERAL_B_TABLE_L2_BASE_64k, Page_64k_Device_RW);
// Create (256 * 4k)=1MB faulting entries to cover private address space. Needs to be marked as Device memory
MMU_TTPage4k (&Image$$TTB$$ZI$$Base, __get_CBAR() ,256, Page_L1_4k, (uint32_t *)PRIVATE_TABLE_L2_BASE_4k, DESCRIPTOR_FAULT);
// Define private address space entry.
MMU_TTPage4k (&Image$$TTB$$ZI$$Base, __get_CBAR() , 3, Page_L1_4k, (uint32_t *)PRIVATE_TABLE_L2_BASE_4k, Page_4k_Device_RW);
// Define L2CC entry. Uncomment if PL310 is present
// MMU_TTPage4k (&Image$$TTB$$ZI$$Base, VE_A5_MP_PL310_BASE , 1, Page_L1_4k, (uint32_t *)PRIVATE_TABLE_L2_BASE_4k, Page_4k_Device_RW);
// Create (256 * 4k)=1MB faulting entries to synchronization space (Useful if some non-cacheable DMA agent is present in the SoC)
MMU_TTPage4k (&Image$$TTB$$ZI$$Base, F_SYNC_BASE , 256, Page_L1_4k, (uint32_t *)SYNC_FLAGS_TABLE_L2_BASE_4k, DESCRIPTOR_FAULT);
// Define synchronization space entry.
MMU_TTPage4k (&Image$$TTB$$ZI$$Base, FLAG_SYNC , 1, Page_L1_4k, (uint32_t *)SYNC_FLAGS_TABLE_L2_BASE_4k, Page_4k_Device_RW);
/* Set location of level 1 page table
; 31:14 - Translation table base addr (31:14-TTBCR.N, TTBCR.N is 0 out of reset)
; 13:7 - 0x0
; 6 - IRGN[0] 0x1 (Inner WB WA)
; 5 - NOS 0x0 (Non-shared)
; 4:3 - RGN 0x01 (Outer WB WA)
; 2 - IMP 0x0 (Implementation Defined)
; 1 - S 0x0 (Non-shared)
; 0 - IRGN[1] 0x0 (Inner WB WA) */
__set_TTBR0(((uint32_t)&Image$$TTB$$ZI$$Base) | 0x48);
__ISB();
/* Set up domain access control register
; We set domain 0 to Client and all other domains to No Access.
; All translation table entries specify domain 0 */
__set_DACR(1);
__ISB();
}
Drivers/CMSIS/DSP/DSP_Lib_TestSuite/DspLibTest_FVP_A5/RTE/Device/ARMCA5/startup_ARMCA5.c
+138
View File
@@ -0,0 +1,138 @@
/******************************************************************************
* @file startup_ARMCA5.c
* @brief CMSIS Device System Source File for Arm Cortex-A5 Device Series
* @version V1.00
* @date 10. January 2018
*
* @note
*
******************************************************************************/
/*
* Copyright (c) 2009-2018 Arm Limited. All rights reserved.
*
* SPDX-License-Identifier: Apache-2.0
*
* Licensed under the Apache License, Version 2.0 (the License); you may
* not use this file except in compliance with the License.
* You may obtain a copy of the License at
*
* www.apache.org/licenses/LICENSE-2.0
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an AS IS BASIS, WITHOUT
* WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
* See the License for the specific language governing permissions and
* limitations under the License.
*/
#include <ARMCA5.h>
/*----------------------------------------------------------------------------
Definitions
*----------------------------------------------------------------------------*/
#define USR_MODE 0x10 // User mode
#define FIQ_MODE 0x11 // Fast Interrupt Request mode
#define IRQ_MODE 0x12 // Interrupt Request mode
#define SVC_MODE 0x13 // Supervisor mode
#define ABT_MODE 0x17 // Abort mode
#define UND_MODE 0x1B // Undefined Instruction mode
#define SYS_MODE 0x1F // System mode
/*----------------------------------------------------------------------------
Internal References
*----------------------------------------------------------------------------*/
void Vectors (void) __attribute__ ((naked, section("RESET")));
void Reset_Handler (void) __attribute__ ((naked));
/*----------------------------------------------------------------------------
Exception / Interrupt Handler
*----------------------------------------------------------------------------*/
void Undef_Handler (void) __attribute__ ((weak, alias("Default_Handler")));
void SVC_Handler (void) __attribute__ ((weak, alias("Default_Handler")));
void PAbt_Handler (void) __attribute__ ((weak, alias("Default_Handler")));
void DAbt_Handler (void) __attribute__ ((weak, alias("Default_Handler")));
void IRQ_Handler (void) __attribute__ ((weak, alias("Default_Handler")));
void FIQ_Handler (void) __attribute__ ((weak, alias("Default_Handler")));
/*----------------------------------------------------------------------------
Exception / Interrupt Vector Table
*----------------------------------------------------------------------------*/
void Vectors(void) {
__ASM volatile(
"LDR PC, =Reset_Handler \n"
"LDR PC, =Undef_Handler \n"
"LDR PC, =SVC_Handler \n"
"LDR PC, =PAbt_Handler \n"
"LDR PC, =DAbt_Handler \n"
"NOP \n"
"LDR PC, =IRQ_Handler \n"
"LDR PC, =FIQ_Handler \n"
);
}
/*----------------------------------------------------------------------------
Reset Handler called on controller reset
*----------------------------------------------------------------------------*/
void Reset_Handler(void) {
__ASM volatile(
// Mask interrupts
"CPSID if \n"
// Put any cores other than 0 to sleep
"MRC p15, 0, R0, c0, c0, 5 \n" // Read MPIDR
"ANDS R0, R0, #3 \n"
"goToSleep: \n"
"WFINE \n"
"BNE goToSleep \n"
// Reset SCTLR Settings
"MRC p15, 0, R0, c1, c0, 0 \n" // Read CP15 System Control register
"BIC R0, R0, #(0x1 << 12) \n" // Clear I bit 12 to disable I Cache
"BIC R0, R0, #(0x1 << 2) \n" // Clear C bit 2 to disable D Cache
"BIC R0, R0, #0x1 \n" // Clear M bit 0 to disable MMU
"BIC R0, R0, #(0x1 << 11) \n" // Clear Z bit 11 to disable branch prediction
"BIC R0, R0, #(0x1 << 13) \n" // Clear V bit 13 to disable hivecs
"MCR p15, 0, R0, c1, c0, 0 \n" // Write value back to CP15 System Control register
"ISB \n"
// Configure ACTLR
"MRC p15, 0, r0, c1, c0, 1 \n" // Read CP15 Auxiliary Control Register
"ORR r0, r0, #(1 << 1) \n" // Enable L2 prefetch hint (UNK/WI since r4p1)
"MCR p15, 0, r0, c1, c0, 1 \n" // Write CP15 Auxiliary Control Register
// Set Vector Base Address Register (VBAR) to point to this application's vector table
"LDR R0, =Vectors \n"
"MCR p15, 0, R0, c12, c0, 0 \n"
// Setup Stack for each exceptional mode
"CPS #0x11 \n"
"LDR SP, =Image$$FIQ_STACK$$ZI$$Limit \n"
"CPS #0x12 \n"
"LDR SP, =Image$$IRQ_STACK$$ZI$$Limit \n"
"CPS #0x13 \n"
"LDR SP, =Image$$SVC_STACK$$ZI$$Limit \n"
"CPS #0x17 \n"
"LDR SP, =Image$$ABT_STACK$$ZI$$Limit \n"
"CPS #0x1B \n"
"LDR SP, =Image$$UND_STACK$$ZI$$Limit \n"
"CPS #0x1F \n"
"LDR SP, =Image$$ARM_LIB_STACK$$ZI$$Limit \n"
// Call SystemInit
"BL SystemInit \n"
// Unmask interrupts
"CPSIE if \n"
// Call __main
"BL __main \n"
);
}
/*----------------------------------------------------------------------------
Default Handler for Exceptions / Interrupts
*----------------------------------------------------------------------------*/
void Default_Handler(void) {
while(1);
}
Drivers/CMSIS/DSP/DSP_Lib_TestSuite/DspLibTest_FVP_A5/RTE/Device/ARMCA5/system_ARMCA5.c
+93
View File
@@ -0,0 +1,93 @@
/******************************************************************************
* @file system_ARMCA5.c
* @brief CMSIS Device System Source File for Arm Cortex-A5 Device Series
* @version V1.0.1
* @date 13. February 2019
*
* @note
*
******************************************************************************/
/*
* Copyright (c) 2009-2019 Arm Limited. All rights reserved.
*
* SPDX-License-Identifier: Apache-2.0
*
* Licensed under the Apache License, Version 2.0 (the License); you may
* not use this file except in compliance with the License.
* You may obtain a copy of the License at
*
* www.apache.org/licenses/LICENSE-2.0
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an AS IS BASIS, WITHOUT
* WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
* See the License for the specific language governing permissions and
* limitations under the License.
*/
#include "RTE_Components.h"
#include CMSIS_device_header
#include "irq_ctrl.h"
#define SYSTEM_CLOCK 12000000U
/*----------------------------------------------------------------------------
System Core Clock Variable
*----------------------------------------------------------------------------*/
uint32_t SystemCoreClock = SYSTEM_CLOCK;
/*----------------------------------------------------------------------------
System Core Clock update function
*----------------------------------------------------------------------------*/
void SystemCoreClockUpdate (void)
{
SystemCoreClock = SYSTEM_CLOCK;
}
/*----------------------------------------------------------------------------
System Initialization
*----------------------------------------------------------------------------*/
void SystemInit (void)
{
/* do not use global variables because this function is called before
reaching pre-main. RW section may be overwritten afterwards. */
// Invalidate entire Unified TLB
__set_TLBIALL(0);
// Invalidate entire branch predictor array
__set_BPIALL(0);
__DSB();
__ISB();
// Invalidate instruction cache and flush branch target cache
__set_ICIALLU(0);
__DSB();
__ISB();
// Invalidate data cache
L1C_InvalidateDCacheAll();
#if ((__FPU_PRESENT == 1) && (__FPU_USED == 1))
// Enable FPU
__FPU_Enable();
#endif
// Create Translation Table
MMU_CreateTranslationTable();
// Enable MMU
MMU_Enable();
// Enable Caches
L1C_EnableCaches();
L1C_EnableBTAC();
#if (__L2C_PRESENT == 1)
// Enable GIC
L2C_Enable();
#endif
// IRQ Initialize
IRQ_Initialize();
}
Drivers/CMSIS/DSP/DSP_Lib_TestSuite/DspLibTest_FVP_A5/RTE/Device/ARMCA5/system_ARMCA5.h
+65
View File
@@ -0,0 +1,65 @@
/******************************************************************************
* @file system_ARMCA5.h
* @brief CMSIS Device System Header File for Arm Cortex-A5 Device Series
* @version V1.00
* @date 10. January 2018
*
* @note
*
******************************************************************************/
/*
* Copyright (c) 2009-2018 Arm Limited. All rights reserved.
*
* SPDX-License-Identifier: Apache-2.0
*
* Licensed under the Apache License, Version 2.0 (the License); you may
* not use this file except in compliance with the License.
* You may obtain a copy of the License at
*
* www.apache.org/licenses/LICENSE-2.0
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an AS IS BASIS, WITHOUT
* WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
* See the License for the specific language governing permissions and
* limitations under the License.
*/
#ifndef __SYSTEM_ARMCA5_H
#define __SYSTEM_ARMCA5_H
#ifdef __cplusplus
extern "C" {
#endif
#include <stdint.h>
extern uint32_t SystemCoreClock; /*!< System Clock Frequency (Core Clock) */
/**
\brief Setup the microcontroller system.
Initialize the System and update the SystemCoreClock variable.
*/
extern void SystemInit (void);
/**
\brief Update SystemCoreClock variable.
Updates the SystemCoreClock with current core Clock retrieved from cpu registers.
*/
extern void SystemCoreClockUpdate (void);
/**
\brief Create Translation Table.
Creates Memory Management Unit Translation Table.
*/
extern void MMU_CreateTranslationTable(void);
#ifdef __cplusplus
}
#endif
#endif /* __SYSTEM_ARMCA5_H */
Drivers/CMSIS/DSP/DSP_Lib_TestSuite/DspLibTest_FVP_A5/RTE/RTE_Components.h
+20
View File
@@ -0,0 +1,20 @@
/*
* Auto generated Run-Time-Environment Component Configuration File
* *** Do not modify ! ***
*
* Project: DspLibTest_FVP_A5
* RTE configuration: DspLibTest_FVP_A5.rteconfig
*/
#ifndef RTE_COMPONENTS_H
#define RTE_COMPONENTS_H
/*
* Define the Device Header File:
*/
#define CMSIS_device_header "ARMCA5.h"
#define RTE_CMSIS_RTOS2 /* CMSIS-RTOS2 */
#define RTE_CMSIS_RTOS2_RTX5 /* CMSIS-RTOS2 Keil RTX5 */
#define RTE_CMSIS_RTOS2_RTX5_SOURCE /* CMSIS-RTOS2 Keil RTX5 Source */
#endif /* RTE_COMPONENTS_H */
Drivers/CMSIS/DSP/DSP_Lib_TestSuite/DspLibTest_FVP_A5/main.c
+34
View File
@@ -0,0 +1,34 @@
/* --------------------------------------------------------------------------
* Copyright (c) 2013-2017 ARM Limited. All rights reserved.
*
* SPDX-License-Identifier: Apache-2.0
*
* Licensed under the Apache License, Version 2.0 (the License); you may
* not use this file except in compliance with the License.
* You may obtain a copy of the License at
*
* www.apache.org/licenses/LICENSE-2.0
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an AS IS BASIS, WITHOUT
* WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
* See the License for the specific language governing permissions and
* limitations under the License.
*
*---------------------------------------------------------------------------*/
#include <stdio.h>
#include "jtest.h"
#include "all_tests.h"
#include "arm_math.h"
int main (void) {
JTEST_INIT(); /* Initialize test framework. */
JTEST_GROUP_CALL(all_tests); /* Run all tests. */
JTEST_ACT_EXIT_FW(); /* Exit test framework. */
while(1); /* Never return */
}