pima/Trinity-DevPCB-V1.0
1
0
Fork 0
Code Issues Pull Requests Actions Packages Projects Releases Wiki Activity

Trinity Devboard PCB V1.0 Firmware. FreeRTOS is setup and the MCU reads IMU data over SPI fand Magnetometer data over I2C, each with a seperate task. Sensordata is then run though MadgwickAHRS and send over USB as serial packet data to use in trinity visualizer. Bare minimum functionality works and is replicated from the first prototype.

Browse Source
This commit is contained in:
pima
2026-09-13 19:51:03 +02:00
commit 7ee381de58
1630 changed files with 632404 additions and 0 deletions
Download Patch File Download Diff File Expand all files Collapse all files
Core/Inc/app_conf.h
+681
View File
@@ -0,0 +1,681 @@
/* USER CODE BEGIN Header */
/**
******************************************************************************
* @file app_conf.h
* @author MCD Application Team
* @brief Application configuration file for STM32WPAN Middleware.
******************************************************************************
* @attention
*
* Copyright (c) 2026 STMicroelectronics.
* All rights reserved.
*
* This software is licensed under terms that can be found in the LICENSE file
* in the root directory of this software component.
* If no LICENSE file comes with this software, it is provided AS-IS.
*
******************************************************************************
*/
/* USER CODE END Header */
/* Define to prevent recursive inclusion -------------------------------------*/
#ifndef APP_CONF_H
#define APP_CONF_H
#include "hw.h"
#include "hw_conf.h"
#include "hw_if.h"
#include "ble_bufsize.h"
/******************************************************************************
* Application Config
******************************************************************************/
/**< generic parameters ******************************************************/
/**
* Define Tx Power
*/
#define CFG_TX_POWER (0x18) /* -0.15dBm */
/**
* Define Advertising parameters
*/
#define CFG_ADV_BD_ADDRESS (0x11aabbccddee)
#define CFG_FAST_CONN_ADV_INTERVAL_MIN (0x80) /**< 80ms */
#define CFG_FAST_CONN_ADV_INTERVAL_MAX (0xA0) /**< 100ms */
#define CFG_LP_CONN_ADV_INTERVAL_MIN (0x640) /**< 1s */
#define CFG_LP_CONN_ADV_INTERVAL_MAX (0xFA0) /**< 2.5s */
#define ADV_TYPE
#define BLE_ADDR_TYPE GAP_PUBLIC_ADDR
#define ADV_FILTER
/**
* Define IO Authentication
*/
#define CFG_BONDING_MODE (0)
#define CFG_ENCRYPTION_KEY_SIZE_MAX (16)
#define CFG_ENCRYPTION_KEY_SIZE_MIN (8)
/**
* Define IO capabilities
*/
#define CFG_IO_CAPABILITY_DISPLAY_ONLY (0x00)
#define CFG_IO_CAPABILITY_DISPLAY_YES_NO (0x01)
#define CFG_IO_CAPABILITY_KEYBOARD_ONLY (0x02)
#define CFG_IO_CAPABILITY_NO_INPUT_NO_OUTPUT (0x03)
#define CFG_IO_CAPABILITY_KEYBOARD_DISPLAY (0x04)
#define CFG_IO_CAPABILITY CFG_IO_CAPABILITY_DISPLAY_YES_NO
/**
* Define MITM modes
*/
#define CFG_MITM_PROTECTION_NOT_REQUIRED (0x00)
#define CFG_MITM_PROTECTION_REQUIRED (0x01)
#define CFG_MITM_PROTECTION CFG_MITM_PROTECTION_REQUIRED
/**
* Define Secure Connections Support
*/
#define CFG_SECURE_NOT_SUPPORTED (0x00)
#define CFG_SECURE_OPTIONAL (0x01)
#define CFG_SECURE_MANDATORY (0x02)
#define CFG_SC_SUPPORT CFG_SECURE_OPTIONAL
/**
* Define Keypress Notification Support
*/
#define CFG_KEYPRESS_NOT_SUPPORTED (0x00)
#define CFG_KEYPRESS_SUPPORTED (0x01)
#define CFG_KEYPRESS_NOTIFICATION_SUPPORT CFG_KEYPRESS_NOT_SUPPORTED
/**
* Numeric Comparison Answers
*/
#define YES (0x01)
#define NO (0x00)
/**
* Device name configuration for Generic Access Service
*/
#define CFG_GAP_DEVICE_NAME "TEMPLATE"
#define CFG_GAP_DEVICE_NAME_LENGTH (8)
/**
* Define PHY
*/
#define ALL_PHYS_PREFERENCE 0x00
#define RX_2M_PREFERRED 0x02
#define TX_2M_PREFERRED 0x02
#define TX_1M 0x01
#define TX_2M 0x02
#define RX_1M 0x01
#define RX_2M 0x02
/**
* Identity root key used to derive IRK and DHK(Legacy)
*/
#define CFG_BLE_IR {0x12, 0x34, 0x56, 0x78, 0x9A, 0xBC, 0xDE, 0xF0, 0x12, 0x34, 0x56, 0x78, 0x9A, 0xBC, 0xDE, 0xF0}
/**
* Encryption root key used to derive LTK(Legacy) and CSRK
*/
#define CFG_BLE_ER {0xFE, 0xDC, 0xBA, 0x09, 0x87, 0x65, 0x43, 0x21, 0xFE, 0xDC, 0xBA, 0x09, 0x87, 0x65, 0x43, 0x21}
/**
* SMPS supply
* SMPS not used when Set to 0
* SMPS used when Set to 1
*/
#define CFG_USE_SMPS 0
/* USER CODE BEGIN Generic_Parameters */
/* USER CODE END Generic_Parameters */
/**< specific parameters */
/*****************************************************/
/* USER CODE BEGIN Specific_Parameters */
/* USER CODE END Specific_Parameters */
/******************************************************************************
* BLE Stack
******************************************************************************/
/**
* Maximum number of simultaneous connections that the device will support.
* Valid values are from 1 to 8
*/
#define CFG_BLE_NUM_LINK 2
/**
* Maximum number of Services that can be stored in the GATT database.
* Note that the GAP and GATT services are automatically added so this parameter should be 2 plus the number of user services
*/
#define CFG_BLE_NUM_GATT_SERVICES 8
/**
* Maximum number of Attributes
* (i.e. the number of characteristic + the number of characteristic values + the number of descriptors, excluding the services)
* that can be stored in the GATT database.
* Note that certain characteristics and relative descriptors are added automatically during device initialization
* so this parameters should be 9 plus the number of user Attributes
*/
#define CFG_BLE_NUM_GATT_ATTRIBUTES 68
/**
* Maximum supported ATT_MTU size
* This parameter is ignored by the CPU2 when CFG_BLE_OPTIONS has SHCI_C2_BLE_INIT_OPTIONS_LL_ONLY flag set
*/
#define CFG_BLE_MAX_ATT_MTU (156)
/**
* Size of the storage area for Attribute values
* This value depends on the number of attributes used by application. In particular the sum of the following quantities (in octets) should be made for each attribute:
* - attribute value length
* - 5, if UUID is 16 bit; 19, if UUID is 128 bit
* - 2, if server configuration descriptor is used
* - 2*DTM_NUM_LINK, if client configuration descriptor is used
* - 2, if extended properties is used
* The total amount of memory needed is the sum of the above quantities for each attribute.
* This parameter is ignored by the CPU2 when CFG_BLE_OPTIONS has SHCI_C2_BLE_INIT_OPTIONS_LL_ONLY flag set
*/
#define CFG_BLE_ATT_VALUE_ARRAY_SIZE (1344)
/**
* Prepare Write List size in terms of number of packet
* This parameter is ignored by the CPU2 when CFG_BLE_OPTIONS has SHCI_C2_BLE_INIT_OPTIONS_LL_ONLY flag set
*/
#define CFG_BLE_PREPARE_WRITE_LIST_SIZE BLE_PREP_WRITE_X_ATT(CFG_BLE_MAX_ATT_MTU)
/**
* Number of allocated memory blocks
* This parameter is overwritten by the CPU2 with an hardcoded optimal value when the parameter CFG_BLE_OPTIONS has SHCI_C2_BLE_INIT_OPTIONS_LL_ONLY flag set
*/
#define CFG_BLE_MBLOCK_COUNT (BLE_MBLOCKS_CALC(CFG_BLE_PREPARE_WRITE_LIST_SIZE, CFG_BLE_MAX_ATT_MTU, CFG_BLE_NUM_LINK))
/**
* Enable or disable the Extended Packet length feature. Valid values are 0 or 1.
*/
#define CFG_BLE_DATA_LENGTH_EXTENSION 1
/**
* Sleep clock accuracy in Peripheral mode (ppm value)
*/
#define CFG_BLE_PERIPHERAL_SCA 500
/**
* Sleep clock accuracy in Central mode
* 0 : 251 ppm to 500 ppm
* 1 : 151 ppm to 250 ppm
* 2 : 101 ppm to 150 ppm
* 3 : 76 ppm to 100 ppm
* 4 : 51 ppm to 75 ppm
* 5 : 31 ppm to 50 ppm
* 6 : 21 ppm to 30 ppm
* 7 : 0 ppm to 20 ppm
*/
#define CFG_BLE_CENTRAL_SCA 0
/**
* LsSource
* Some information for Low speed clock mapped in bits field
* - bit 0: 1: Calibration for the RF system wakeup clock source 0: No calibration for the RF system wakeup clock source
* - bit 1: 1: STM32WB5M Module device 0: Other devices as STM32WBxx SOC, STM32WB1M module
* - bit 2: 1: HSE/1024 Clock config 0: LSE Clock config
*/
#if defined(STM32WB5Mxx)
#define CFG_BLE_LS_SOURCE (SHCI_C2_BLE_INIT_CFG_BLE_LS_NOCALIB | SHCI_C2_BLE_INIT_CFG_BLE_LS_MOD5MM_DEV | SHCI_C2_BLE_INIT_CFG_BLE_LS_CLK_HSE_1024)
#else
#define CFG_BLE_LS_SOURCE (SHCI_C2_BLE_INIT_CFG_BLE_LS_NOCALIB | SHCI_C2_BLE_INIT_CFG_BLE_LS_OTHER_DEV | SHCI_C2_BLE_INIT_CFG_BLE_LS_CLK_HSE_1024)
#endif
/**
* Start up time of the high speed (16 or 32 MHz) crystal oscillator in units of 625/256 us (~2.44 us)
*/
#define CFG_BLE_HSE_STARTUP_TIME 0x148
/**
* Maximum duration of the connection event when the device is in Peripheral mode in units of 625/256 us (~2.44 us)
*/
#define CFG_BLE_MAX_CONN_EVENT_LENGTH (0xFFFFFFFF)
/**
* Viterbi Mode
* 1 : enabled
* 0 : disabled
*/
#define CFG_BLE_VITERBI_MODE 1
/**
* BLE stack Options flags to be configured with:
* - SHCI_C2_BLE_INIT_OPTIONS_LL_ONLY
* - SHCI_C2_BLE_INIT_OPTIONS_LL_HOST
* - SHCI_C2_BLE_INIT_OPTIONS_NO_SVC_CHANGE_DESC
* - SHCI_C2_BLE_INIT_OPTIONS_WITH_SVC_CHANGE_DESC
* - SHCI_C2_BLE_INIT_OPTIONS_DEVICE_NAME_RO
* - SHCI_C2_BLE_INIT_OPTIONS_DEVICE_NAME_RW
* - SHCI_C2_BLE_INIT_OPTIONS_EXT_ADV
* - SHCI_C2_BLE_INIT_OPTIONS_NO_EXT_ADV
* - SHCI_C2_BLE_INIT_OPTIONS_CS_ALGO2
* - SHCI_C2_BLE_INIT_OPTIONS_NO_CS_ALGO2
* - SHCI_C2_BLE_INIT_OPTIONS_REDUC_GATTDB_NVM
* - SHCI_C2_BLE_INIT_OPTIONS_FULL_GATTDB_NVM
* - SHCI_C2_BLE_INIT_OPTIONS_GATT_CACHING_USED
* - SHCI_C2_BLE_INIT_OPTIONS_GATT_CACHING_NOTUSED
* - SHCI_C2_BLE_INIT_OPTIONS_POWER_CLASS_1
* - SHCI_C2_BLE_INIT_OPTIONS_POWER_CLASS_2_3
* which are used to set following configuration bits:
* (bit 0): 1: LL only
* 0: LL + host
* (bit 1): 1: no service change desc.
* 0: with service change desc.
* (bit 2): 1: device name Read-Only
* 0: device name R/W
* (bit 3): 1: extended advertizing supported
* 0: extended advertizing not supported
* (bit 4): 1: CS Algo #2 supported
* 0: CS Algo #2 not supported
* (bit 5): 1: Reduced GATT database in NVM
* 0: Full GATT database in NVM
* (bit 6): 1: GATT caching is used
* 0: GATT caching is not used
* (bit 7): 1: LE Power Class 1
* 0: LE Power Class 2-3
* other bits: complete with Options_extension flag
*/
#define CFG_BLE_OPTIONS (SHCI_C2_BLE_INIT_OPTIONS_LL_HOST | SHCI_C2_BLE_INIT_OPTIONS_WITH_SVC_CHANGE_DESC | SHCI_C2_BLE_INIT_OPTIONS_DEVICE_NAME_RW | SHCI_C2_BLE_INIT_OPTIONS_NO_EXT_ADV | SHCI_C2_BLE_INIT_OPTIONS_NO_CS_ALGO2 | SHCI_C2_BLE_INIT_OPTIONS_FULL_GATTDB_NVM | SHCI_C2_BLE_INIT_OPTIONS_GATT_CACHING_NOTUSED | SHCI_C2_BLE_INIT_OPTIONS_POWER_CLASS_2_3)
/**
* BLE stack Options_extension flags to be configured with:
* - SHCI_C2_BLE_INIT_OPTIONS_APPEARANCE_WRITABLE
* - SHCI_C2_BLE_INIT_OPTIONS_APPEARANCE_READONLY
* - SHCI_C2_BLE_INIT_OPTIONS_ENHANCED_ATT_SUPPORTED
* - SHCI_C2_BLE_INIT_OPTIONS_ENHANCED_ATT_NOTSUPPORTED
* which are used to set following configuration bits:
* (bit 0): 1: appearance Writable
* 0: appearance Read-Only
* (bit 1): 1: Enhanced ATT supported
* 0: Enhanced ATT not supported
* other bits: reserved (shall be set to 0)
*/
#define CFG_BLE_OPTIONS_EXT (SHCI_C2_BLE_INIT_OPTIONS_APPEARANCE_READONLY | SHCI_C2_BLE_INIT_OPTIONS_ENHANCED_ATT_NOTSUPPORTED)
#define CFG_BLE_MAX_COC_INITIATOR_NBR (32)
#define CFG_BLE_MIN_TX_POWER (0)
#define CFG_BLE_MAX_TX_POWER (0)
/**
* BLE stack Maximum number of created Enhanced ATT bearers to be configured
* in addition to the number of links
* - Range: 0 .. 4
*/
#define CFG_BLE_MAX_ADD_EATT_BEARERS (4)
/**
* BLE Rx model configuration flags to be configured with:
* - SHCI_C2_BLE_INIT_RX_MODEL_AGC_RSSI_LEGACY
* - SHCI_C2_BLE_INIT_RX_MODEL_AGC_RSSI_BLOCKER
* which are used to set following configuration bits:
* (bit 0): 1: agc_rssi model improved vs RF blockers
* 0: Legacy agc_rssi model
* other bits: reserved (shall be set to 0)
*/
#define CFG_BLE_RX_MODEL_CONFIG (SHCI_C2_BLE_INIT_RX_MODEL_AGC_RSSI_LEGACY)
/* Maximum number of advertising sets.
* Range: 1 .. 8 with limitation:
* This parameter is linked to CFG_BLE_MAX_ADV_DATA_LEN such as both compliant with allocated Total memory computed with BLE_EXT_ADV_BUFFER_SIZE based
* on Max Extended advertising configuration supported.
* This parameter is considered by the CPU2 when CFG_BLE_OPTIONS has SHCI_C2_BLE_INIT_OPTIONS_EXT_ADV flag set
*/
#define CFG_BLE_MAX_ADV_SET_NBR (3)
/* Maximum advertising data length (in bytes)
* Range: 31 .. 1650 with limitation:
* This parameter is linked to CFG_BLE_MAX_ADV_SET_NBR such as both compliant with allocated Total memory computed with BLE_EXT_ADV_BUFFER_SIZE based
* on Max Extended advertising configuration supported.
* This parameter is considered by the CPU2 when CFG_BLE_OPTIONS has SHCI_C2_BLE_INIT_OPTIONS_EXT_ADV flag set
*/
#define CFG_BLE_MAX_ADV_DATA_LEN (1650)
/* RF TX Path Compensation Value (16-bit signed integer). Units: 0.1 dB.
* Range: -1280 .. 1280
*/
#define CFG_BLE_TX_PATH_COMPENS (0)
/* RF RX Path Compensation Value (16-bit signed integer). Units: 0.1 dB.
* Range: -1280 .. 1280
*/
#define CFG_BLE_RX_PATH_COMPENS (0)
/* BLE core version (16-bit signed integer).
* - SHCI_C2_BLE_INIT_BLE_CORE_5_2
* - SHCI_C2_BLE_INIT_BLE_CORE_5_3
* - SHCI_C2_BLE_INIT_BLE_CORE_5_4
* which are used to set: 11(5.2), 12(5.3), 13(5.4).
*/
#define CFG_BLE_CORE_VERSION (SHCI_C2_BLE_INIT_BLE_CORE_5_4)
/******************************************************************************
* Transport Layer
******************************************************************************/
/**
* Queue length of BLE Event
* This parameter defines the number of asynchronous events that can be stored in the HCI layer before
* being reported to the application. When a command is sent to the BLE core coprocessor, the HCI layer
* is waiting for the event with the Num_HCI_Command_Packets set to 1. The receive queue shall be large
* enough to store all asynchronous events received in between.
* When CFG_TLBLE_MOST_EVENT_PAYLOAD_SIZE is set to 27, this allow to store three 255 bytes long asynchronous events
* between the HCI command and its event.
* This parameter depends on the value given to CFG_TLBLE_MOST_EVENT_PAYLOAD_SIZE. When the queue size is to small,
* the system may hang if the queue is full with asynchronous events and the HCI layer is still waiting
* for a CC/CS event, In that case, the notification TL_BLE_HCI_ToNot() is called to indicate
* to the application a HCI command did not receive its command event within 30s (Default HCI Timeout).
*/
#define CFG_TLBLE_EVT_QUEUE_LENGTH 5
/**
* This parameter should be set to fit most events received by the HCI layer. It defines the buffer size of each element
* allocated in the queue of received events and can be used to optimize the amount of RAM allocated by the Memory Manager.
* It should not exceed 255 which is the maximum HCI packet payload size (a greater value is a lost of memory as it will
* never be used)
* It shall be at least 4 to receive the command status event in one frame.
* The default value is set to 27 to allow receiving an event of MTU size in a single buffer. This value maybe reduced
* further depending on the application.
*/
#define CFG_TLBLE_MOST_EVENT_PAYLOAD_SIZE 255 /**< Set to 255 with the memory manager and the mailbox */
#define TL_BLE_EVENT_FRAME_SIZE ( TL_EVT_HDR_SIZE + CFG_TLBLE_MOST_EVENT_PAYLOAD_SIZE )
/******************************************************************************
* UART interfaces
******************************************************************************/
/**
* Select UART interfaces
*/
#define CFG_DEBUG_TRACE_UART 0
#define CFG_CONSOLE_MENU 0
/******************************************************************************
* USB interface
******************************************************************************/
/**
* Enable/Disable USB interface
*/
#define CFG_USB_INTERFACE_ENABLE 0
/******************************************************************************
* IPCC interface
******************************************************************************/
/**
* The IPCC is dedicated to the communication between the CPU2 and the CPU1
* and shall not be modified by the application
* The two following definitions shall not be modified
*/
#define HAL_IPCC_TX_IRQHandler(...) HW_IPCC_Tx_Handler( )
#define HAL_IPCC_RX_IRQHandler(...) HW_IPCC_Rx_Handler( )
/******************************************************************************
* Low Power
******************************************************************************/
/**
* When set to 1, the low power mode is enable
* When set to 0, the device stays in RUN mode
*/
#define CFG_LPM_SUPPORTED 0
/******************************************************************************
* RTC interface
******************************************************************************/
#define HAL_RTCEx_WakeUpTimerIRQHandler(...) HW_TS_RTC_Wakeup_Handler( )
/******************************************************************************
* Timer Server
******************************************************************************/
/**
* CFG_RTC_WUCKSEL_DIVIDER: This sets the RTCCLK divider to the wakeup timer.
* The lower is the value, the better is the power consumption and the accuracy of the timerserver
* The higher is the value, the finest is the granularity
*
* CFG_RTC_ASYNCH_PRESCALER: This sets the asynchronous prescaler of the RTC. It should as high as possible ( to output
* clock as low as possible) but the output clock should be equal or higher frequency compare to the clock feeding
* the wakeup timer. A lower clock speed would impact the accuracy of the timer server.
*
* CFG_RTC_SYNCH_PRESCALER: This sets the synchronous prescaler of the RTC.
* When the 1Hz calendar clock is required, it shall be sets according to other settings
* When the 1Hz calendar clock is not needed, CFG_RTC_SYNCH_PRESCALER should be set to 0x7FFF (MAX VALUE)
*
* CFG_RTCCLK_DIVIDER_CONF:
* Shall be set to either 0,2,4,8,16
* When set to either 2,4,8,16, the 1Hhz calendar is supported
* When set to 0, the user sets its own configuration
*
* The following settings are computed with LSI as input to the RTC
*/
#define CFG_RTCCLK_DIVIDER_CONF 0
#if (CFG_RTCCLK_DIVIDER_CONF == 0)
/**
* Custom configuration
* It does not support 1Hz calendar
* It divides the RTC CLK by 16
*/
#define CFG_RTCCLK_DIV (16)
#define CFG_RTC_WUCKSEL_DIVIDER (0)
#define CFG_RTC_ASYNCH_PRESCALER (0x0F)
#define CFG_RTC_SYNCH_PRESCALER (0x7FFF)
#else
#if (CFG_RTCCLK_DIVIDER_CONF == 2)
/**
* It divides the RTC CLK by 2
*/
#define CFG_RTC_WUCKSEL_DIVIDER (3)
#endif
#if (CFG_RTCCLK_DIVIDER_CONF == 4)
/**
* It divides the RTC CLK by 4
*/
#define CFG_RTC_WUCKSEL_DIVIDER (2)
#endif
#if (CFG_RTCCLK_DIVIDER_CONF == 8)
/**
* It divides the RTC CLK by 8
*/
#define CFG_RTC_WUCKSEL_DIVIDER (1)
#endif
#if (CFG_RTCCLK_DIVIDER_CONF == 16)
/**
* It divides the RTC CLK by 16
*/
#define CFG_RTC_WUCKSEL_DIVIDER (0)
#endif
#define CFG_RTCCLK_DIV CFG_RTCCLK_DIVIDER_CONF
#define CFG_RTC_ASYNCH_PRESCALER (CFG_RTCCLK_DIV - 1)
#define CFG_RTC_SYNCH_PRESCALER (DIVR( LSE_VALUE, (CFG_RTC_ASYNCH_PRESCALER+1) ) - 1 )
#endif
/** tick timer values */
#define CFG_TS_TICK_VAL DIVR( (CFG_RTCCLK_DIV * 1000000), LSE_VALUE )
#define CFG_TS_TICK_VAL_PS DIVR( ((uint64_t)CFG_RTCCLK_DIV * 1e12), (uint64_t)LSE_VALUE )
typedef enum
{
CFG_TIM_PROC_ID_ISR,
/* USER CODE BEGIN CFG_TimProcID_t */
/* USER CODE END CFG_TimProcID_t */
} CFG_TimProcID_t;
/******************************************************************************
* Debug
******************************************************************************/
/**
* When set, this resets some hw resources to put the device in the same state as at power up.
* It resets only register that may prevent the FW to run properly.
*
* This shall be set to 0 in a final product
*
*/
#define CFG_HW_RESET_BY_FW 0
/**
* keep debugger enabled while in any low power mode when set to 1
* should be set to 0 in production
*/
#define CFG_DEBUGGER_SUPPORTED 1
/**
* When set to 1, the traces are enabled in the BLE services
*/
#define CFG_DEBUG_BLE_TRACE 0
/**
* Enable or Disable traces in application
*/
#define CFG_DEBUG_APP_TRACE 0
#if (CFG_DEBUG_APP_TRACE != 0)
#define APP_DBG_MSG PRINT_MESG_DBG
#else
#define APP_DBG_MSG PRINT_NO_MESG
#endif
#if ( (CFG_DEBUG_BLE_TRACE != 0) || (CFG_DEBUG_APP_TRACE != 0) )
#define CFG_DEBUG_TRACE 1
#endif
#if (CFG_DEBUG_TRACE != 0)
#undef CFG_LPM_SUPPORTED
#undef CFG_DEBUGGER_SUPPORTED
#define CFG_LPM_SUPPORTED 0
#define CFG_DEBUGGER_SUPPORTED 1
#endif
/**
* When CFG_DEBUG_TRACE_FULL is set to 1, the trace are output with the API name, the file name and the line number
* When CFG_DEBUG_TRACE_LIGHT is set to 1, only the debug message is output
*
* When both are set to 0, no trace are output
* When both are set to 1, CFG_DEBUG_TRACE_FULL is selected
*/
#define CFG_DEBUG_TRACE_LIGHT 0
#define CFG_DEBUG_TRACE_FULL 0
#if (( CFG_DEBUG_TRACE != 0 ) && ( CFG_DEBUG_TRACE_LIGHT == 0 ) && (CFG_DEBUG_TRACE_FULL == 0))
#undef CFG_DEBUG_TRACE_FULL
#undef CFG_DEBUG_TRACE_LIGHT
#define CFG_DEBUG_TRACE_FULL 0
#define CFG_DEBUG_TRACE_LIGHT 1
#endif
#if ( CFG_DEBUG_TRACE == 0 )
#undef CFG_DEBUG_TRACE_FULL
#undef CFG_DEBUG_TRACE_LIGHT
#define CFG_DEBUG_TRACE_FULL 0
#define CFG_DEBUG_TRACE_LIGHT 0
#endif
/**
* When not set, the traces is looping on sending the trace over UART
*/
#define DBG_TRACE_USE_CIRCULAR_QUEUE 1
/**
* max buffer Size to queue data traces and max data trace allowed.
* Only Used if DBG_TRACE_USE_CIRCULAR_QUEUE is defined
*/
#define DBG_TRACE_MSG_QUEUE_SIZE 4096
#define MAX_DBG_TRACE_MSG_SIZE 1024
/* USER CODE BEGIN Defines */
/* USER CODE END Defines */
/******************************************************************************
* FreeRTOS
******************************************************************************/
/* USER CODE BEGIN FreeRTOS */
/* USER CODE END FreeRTOS */
#define CFG_SHCI_USER_EVT_PROCESS_NAME "SHCI_USER_EVT_PROCESS"
#define CFG_SHCI_USER_EVT_PROCESS_ATTR_BITS (0)
#define CFG_SHCI_USER_EVT_PROCESS_CB_MEM (0)
#define CFG_SHCI_USER_EVT_PROCESS_CB_SIZE (0)
#define CFG_SHCI_USER_EVT_PROCESS_STACK_MEM (0)
#define CFG_SHCI_USER_EVT_PROCESS_PRIORITY osPriorityNone
#define CFG_SHCI_USER_EVT_PROCESS_STACK_SIZE (128 * 20)
#define CFG_HCI_USER_EVT_PROCESS_NAME "HCI_USER_EVT_PROCESS"
#define CFG_HCI_USER_EVT_PROCESS_ATTR_BITS (0)
#define CFG_HCI_USER_EVT_PROCESS_CB_MEM (0)
#define CFG_HCI_USER_EVT_PROCESS_CB_SIZE (0)
#define CFG_HCI_USER_EVT_PROCESS_STACK_MEM (0)
#define CFG_HCI_USER_EVT_PROCESS_PRIORITY osPriorityNone
#define CFG_HCI_USER_EVT_PROCESS_STACK_SIZE (128 * 40)
#define CFG_ADV_UPDATE_PROCESS_NAME "ADV_UPDATE_PROCESS"
#define CFG_ADV_UPDATE_PROCESS_ATTR_BITS (0)
#define CFG_ADV_UPDATE_PROCESS_CB_MEM (0)
#define CFG_ADV_UPDATE_PROCESS_CB_SIZE (0)
#define CFG_ADV_UPDATE_PROCESS_STACK_MEM (0)
#define CFG_ADV_UPDATE_PROCESS_PRIORITY osPriorityNone
#define CFG_ADV_UPDATE_PROCESS_STACK_SIZE (128 * 20)
#define CFG_HRS_PROCESS_NAME "HRS_PROCESS"
#define CFG_HRS_PROCESS_ATTR_BITS (0)
#define CFG_HRS_PROCESS_CB_MEM (0)
#define CFG_HRS_PROCESS_CB_SIZE (0)
#define CFG_HRS_PROCESS_STACK_MEM (0)
#define CFG_HRS_PROCESS_PRIORITY osPriorityNone
#define CFG_HRS_PROCESS_STACK_SIZE (128 * 20)
/* USER CODE BEGIN FreeRTOS_Defines */
/* USER CODE END FreeRTOS_Defines */
/******************************************************************************
* LOW POWER
******************************************************************************/
/**
* Supported requester to the MCU Low Power Manager - can be increased up to 32
* It list a bit mapping of all user of the Low Power Manager
*/
typedef enum
{
CFG_LPM_APP,
CFG_LPM_APP_BLE,
/* USER CODE BEGIN CFG_LPM_Id_t */
/* USER CODE END CFG_LPM_Id_t */
} CFG_LPM_Id_t;
/******************************************************************************
* OTP manager
******************************************************************************/
#define CFG_OTP_BASE_ADDRESS OTP_AREA_BASE
#define CFG_OTP_END_ADRESS OTP_AREA_END_ADDR
#endif /*APP_CONF_H */