Debug/Core/Src/app_debug.su

../Drivers/STM32WBxx_HAL_Driver/Inc/stm32wbxx_ll_exti.h:391:22:LL_EXTI_EnableIT_32_63	16	static
../Drivers/STM32WBxx_HAL_Driver/Inc/stm32wbxx_ll_bus.h:539:22:LL_AHB2_GRP1_EnableClock	24	static
../Drivers/STM32WBxx_HAL_Driver/Inc/stm32wbxx_ll_bus.h:1636:22:LL_C2_AHB2_GRP1_EnableClock	24	static
../Core/Src/app_debug.c:176:6:APPD_Init	8	static
../Core/Src/app_debug.c:222:6:APPD_EnableCPU2	48	static
../Core/Src/app_debug.c:251:13:APPD_SetCPU2GpioConfig	40	static
../Core/Src/app_debug.c:319:13:APPD_BleDtbCfg	4	static
Trinity Devboard PCB V1.0 Firmware. FreeRTOS is setup and the MCU reads IMU data over SPI fand Magnetometer data over I2C, each with a seperate task. Sensordata is then run though MadgwickAHRS and send over USB as serial packet data to use in trinity visualizer. Bare minimum functionality works and is replicated from the first prototype. 2026-09-13 19:51:03 +02:00			`../Drivers/STM32WBxx_HAL_Driver/Inc/stm32wbxx_ll_exti.h:391:22:LL_EXTI_EnableIT_32_63 16 static`
			`../Drivers/STM32WBxx_HAL_Driver/Inc/stm32wbxx_ll_bus.h:539:22:LL_AHB2_GRP1_EnableClock 24 static`
			`../Drivers/STM32WBxx_HAL_Driver/Inc/stm32wbxx_ll_bus.h:1636:22:LL_C2_AHB2_GRP1_EnableClock 24 static`
			`../Core/Src/app_debug.c:176:6:APPD_Init 8 static`
			`../Core/Src/app_debug.c:222:6:APPD_EnableCPU2 48 static`
			`../Core/Src/app_debug.c:251:13:APPD_SetCPU2GpioConfig 40 static`
			`../Core/Src/app_debug.c:319:13:APPD_BleDtbCfg 4 static`