diff --git a/RTOS_Dual_Sensor_Single_Board_Testing/.cproject b/RTOS_Dual_Sensor_Single_Board_Testing/.cproject index cd7dd24..f9e330a 100644 --- a/RTOS_Dual_Sensor_Single_Board_Testing/.cproject +++ b/RTOS_Dual_Sensor_Single_Board_Testing/.cproject @@ -23,7 +23,7 @@ @@ -119,7 +119,7 @@ diff --git a/RTOS_Dual_Sensor_Single_Board_Testing/.mxproject b/RTOS_Dual_Sensor_Single_Board_Testing/.mxproject index 229d826..79d926e 100644 --- a/RTOS_Dual_Sensor_Single_Board_Testing/.mxproject +++ b/RTOS_Dual_Sensor_Single_Board_Testing/.mxproject @@ -1,9 +1,9 @@ [PreviousLibFiles] -LibFiles=Drivers\STM32F4xx_HAL_Driver\Inc\stm32f4xx_hal_tim.h;Drivers\STM32F4xx_HAL_Driver\Inc\stm32f4xx_hal_tim_ex.h;Drivers\STM32F4xx_HAL_Driver\Inc\stm32f4xx_hal_rcc.h;Drivers\STM32F4xx_HAL_Driver\Inc\stm32f4xx_hal_rcc_ex.h;Drivers\STM32F4xx_HAL_Driver\Inc\stm32f4xx_ll_bus.h;Drivers\STM32F4xx_HAL_Driver\Inc\stm32f4xx_ll_rcc.h;Drivers\STM32F4xx_HAL_Driver\Inc\stm32f4xx_ll_system.h;Drivers\STM32F4xx_HAL_Driver\Inc\stm32f4xx_ll_utils.h;Drivers\STM32F4xx_HAL_Driver\Inc\stm32f4xx_hal_flash.h;Drivers\STM32F4xx_HAL_Driver\Inc\stm32f4xx_hal_flash_ex.h;Drivers\STM32F4xx_HAL_Driver\Inc\stm32f4xx_hal_flash_ramfunc.h;Drivers\STM32F4xx_HAL_Driver\Inc\stm32f4xx_hal_gpio.h;Drivers\STM32F4xx_HAL_Driver\Inc\stm32f4xx_hal_gpio_ex.h;Drivers\STM32F4xx_HAL_Driver\Inc\stm32f4xx_ll_gpio.h;Drivers\STM32F4xx_HAL_Driver\Inc\stm32f4xx_hal_dma_ex.h;Drivers\STM32F4xx_HAL_Driver\Inc\stm32f4xx_hal_dma.h;Drivers\STM32F4xx_HAL_Driver\Inc\stm32f4xx_ll_dma.h;Drivers\STM32F4xx_HAL_Driver\Inc\stm32f4xx_ll_dmamux.h;Drivers\STM32F4xx_HAL_Driver\Inc\stm32f4xx_hal_pwr.h;Drivers\STM32F4xx_HAL_Driver\Inc\stm32f4xx_hal_pwr_ex.h;Drivers\STM32F4xx_HAL_Driver\Inc\stm32f4xx_ll_pwr.h;Drivers\STM32F4xx_HAL_Driver\Inc\stm32f4xx_hal_cortex.h;Drivers\STM32F4xx_HAL_Driver\Inc\stm32f4xx_ll_cortex.h;Drivers\STM32F4xx_HAL_Driver\Inc\stm32f4xx_hal.h;Drivers\STM32F4xx_HAL_Driver\Inc\Legacy\stm32_hal_legacy.h;Drivers\STM32F4xx_HAL_Driver\Inc\stm32f4xx_hal_def.h;Drivers\STM32F4xx_HAL_Driver\Inc\stm32f4xx_hal_exti.h;Drivers\STM32F4xx_HAL_Driver\Inc\stm32f4xx_ll_exti.h;Drivers\STM32F4xx_HAL_Driver\Inc\stm32f4xx_hal_i2c.h;Drivers\STM32F4xx_HAL_Driver\Inc\stm32f4xx_ll_i2c.h;Drivers\STM32F4xx_HAL_Driver\Inc\stm32f4xx_hal_i2c_ex.h;Drivers\STM32F4xx_HAL_Driver\Inc\stm32f4xx_hal_uart.h;Drivers\STM32F4xx_HAL_Driver\Inc\stm32f4xx_ll_usart.h;Middlewares\Third_Party\FreeRTOS\Source\include\croutine.h;Middlewares\Third_Party\FreeRTOS\Source\include\deprecated_definitions.h;Middlewares\Third_Party\FreeRTOS\Source\include\event_groups.h;Middlewares\Third_Party\FreeRTOS\Source\include\FreeRTOS.h;Middlewares\Third_Party\FreeRTOS\Source\include\list.h;Middlewares\Third_Party\FreeRTOS\Source\include\message_buffer.h;Middlewares\Third_Party\FreeRTOS\Source\include\mpu_prototypes.h;Middlewares\Third_Party\FreeRTOS\Source\include\mpu_wrappers.h;Middlewares\Third_Party\FreeRTOS\Source\include\portable.h;Middlewares\Third_Party\FreeRTOS\Source\include\projdefs.h;Middlewares\Third_Party\FreeRTOS\Source\include\queue.h;Middlewares\Third_Party\FreeRTOS\Source\include\semphr.h;Middlewares\Third_Party\FreeRTOS\Source\include\stack_macros.h;Middlewares\Third_Party\FreeRTOS\Source\include\StackMacros.h;Middlewares\Third_Party\FreeRTOS\Source\include\stream_buffer.h;Middlewares\Third_Party\FreeRTOS\Source\include\task.h;Middlewares\Third_Party\FreeRTOS\Source\include\timers.h;Middlewares\Third_Party\FreeRTOS\Source\include\atomic.h;Middlewares\Third_Party\FreeRTOS\Source\CMSIS_RTOS\cmsis_os.h;Middlewares\Third_Party\FreeRTOS\Source\portable\GCC\ARM_CM4F\portmacro.h;Drivers\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_tim.c;Drivers\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_tim_ex.c;Drivers\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_rcc.c;Drivers\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_rcc_ex.c;Drivers\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_flash.c;Drivers\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_flash_ex.c;Drivers\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_flash_ramfunc.c;Drivers\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_gpio.c;Drivers\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_dma_ex.c;Drivers\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_dma.c;Drivers\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_pwr.c;Drivers\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_pwr_ex.c;Drivers\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_cortex.c;Drivers\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal.c;Drivers\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_exti.c;Drivers\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_i2c.c;Drivers\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_i2c_ex.c;Drivers\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_uart.c;Middlewares\Third_Party\FreeRTOS\Source\croutine.c;Middlewares\Third_Party\FreeRTOS\Source\event_groups.c;Middlewares\Third_Party\FreeRTOS\Source\list.c;Middlewares\Third_Party\FreeRTOS\Source\queue.c;Middlewares\Third_Party\FreeRTOS\Source\stream_buffer.c;Middlewares\Third_Party\FreeRTOS\Source\tasks.c;Middlewares\Third_Party\FreeRTOS\Source\timers.c;Middlewares\Third_Party\FreeRTOS\Source\CMSIS_RTOS\cmsis_os.c;Middlewares\Third_Party\FreeRTOS\Source\portable\MemMang\heap_4.c;Middlewares\Third_Party\FreeRTOS\Source\portable\GCC\ARM_CM4F\port.c;Drivers\STM32F4xx_HAL_Driver\Inc\stm32f4xx_hal_tim.h;Drivers\STM32F4xx_HAL_Driver\Inc\stm32f4xx_hal_tim_ex.h;Drivers\STM32F4xx_HAL_Driver\Inc\stm32f4xx_hal_rcc.h;Drivers\STM32F4xx_HAL_Driver\Inc\stm32f4xx_hal_rcc_ex.h;Drivers\STM32F4xx_HAL_Driver\Inc\stm32f4xx_ll_bus.h;Drivers\STM32F4xx_HAL_Driver\Inc\stm32f4xx_ll_rcc.h;Drivers\STM32F4xx_HAL_Driver\Inc\stm32f4xx_ll_system.h;Drivers\STM32F4xx_HAL_Driver\Inc\stm32f4xx_ll_utils.h;Drivers\STM32F4xx_HAL_Driver\Inc\stm32f4xx_hal_flash.h;Drivers\STM32F4xx_HAL_Driver\Inc\stm32f4xx_hal_flash_ex.h;Drivers\STM32F4xx_HAL_Driver\Inc\stm32f4xx_hal_flash_ramfunc.h;Drivers\STM32F4xx_HAL_Driver\Inc\stm32f4xx_hal_gpio.h;Drivers\STM32F4xx_HAL_Driver\Inc\stm32f4xx_hal_gpio_ex.h;Drivers\STM32F4xx_HAL_Driver\Inc\stm32f4xx_ll_gpio.h;Drivers\STM32F4xx_HAL_Driver\Inc\stm32f4xx_hal_dma_ex.h;Drivers\STM32F4xx_HAL_Driver\Inc\stm32f4xx_hal_dma.h;Drivers\STM32F4xx_HAL_Driver\Inc\stm32f4xx_ll_dma.h;Drivers\STM32F4xx_HAL_Driver\Inc\stm32f4xx_ll_dmamux.h;Drivers\STM32F4xx_HAL_Driver\Inc\stm32f4xx_hal_pwr.h;Drivers\STM32F4xx_HAL_Driver\Inc\stm32f4xx_hal_pwr_ex.h;Drivers\STM32F4xx_HAL_Driver\Inc\stm32f4xx_ll_pwr.h;Drivers\STM32F4xx_HAL_Driver\Inc\stm32f4xx_hal_cortex.h;Drivers\STM32F4xx_HAL_Driver\Inc\stm32f4xx_ll_cortex.h;Drivers\STM32F4xx_HAL_Driver\Inc\stm32f4xx_hal.h;Drivers\STM32F4xx_HAL_Driver\Inc\Legacy\stm32_hal_legacy.h;Drivers\STM32F4xx_HAL_Driver\Inc\stm32f4xx_hal_def.h;Drivers\STM32F4xx_HAL_Driver\Inc\stm32f4xx_hal_exti.h;Drivers\STM32F4xx_HAL_Driver\Inc\stm32f4xx_ll_exti.h;Drivers\STM32F4xx_HAL_Driver\Inc\stm32f4xx_hal_i2c.h;Drivers\STM32F4xx_HAL_Driver\Inc\stm32f4xx_ll_i2c.h;Drivers\STM32F4xx_HAL_Driver\Inc\stm32f4xx_hal_i2c_ex.h;Drivers\STM32F4xx_HAL_Driver\Inc\stm32f4xx_hal_uart.h;Drivers\STM32F4xx_HAL_Driver\Inc\stm32f4xx_ll_usart.h;Middlewares\Third_Party\FreeRTOS\Source\include\croutine.h;Middlewares\Third_Party\FreeRTOS\Source\include\deprecated_definitions.h;Middlewares\Third_Party\FreeRTOS\Source\include\event_groups.h;Middlewares\Third_Party\FreeRTOS\Source\include\FreeRTOS.h;Middlewares\Third_Party\FreeRTOS\Source\include\list.h;Middlewares\Third_Party\FreeRTOS\Source\include\message_buffer.h;Middlewares\Third_Party\FreeRTOS\Source\include\mpu_prototypes.h;Middlewares\Third_Party\FreeRTOS\Source\include\mpu_wrappers.h;Middlewares\Third_Party\FreeRTOS\Source\include\portable.h;Middlewares\Third_Party\FreeRTOS\Source\include\projdefs.h;Middlewares\Third_Party\FreeRTOS\Source\include\queue.h;Middlewares\Third_Party\FreeRTOS\Source\include\semphr.h;Middlewares\Third_Party\FreeRTOS\Source\include\stack_macros.h;Middlewares\Third_Party\FreeRTOS\Source\include\StackMacros.h;Middlewares\Third_Party\FreeRTOS\Source\include\stream_buffer.h;Middlewares\Third_Party\FreeRTOS\Source\include\task.h;Middlewares\Third_Party\FreeRTOS\Source\include\timers.h;Middlewares\Third_Party\FreeRTOS\Source\include\atomic.h;Middlewares\Third_Party\FreeRTOS\Source\CMSIS_RTOS\cmsis_os.h;Middlewares\Third_Party\FreeRTOS\Source\portable\GCC\ARM_CM4F\portmacro.h;Drivers\CMSIS\Device\ST\STM32F4xx\Include\stm32f446xx.h;Drivers\CMSIS\Device\ST\STM32F4xx\Include\stm32f4xx.h;Drivers\CMSIS\Device\ST\STM32F4xx\Include\system_stm32f4xx.h;Drivers\CMSIS\Device\ST\STM32F4xx\Include\system_stm32f4xx.h;Drivers\CMSIS\Device\ST\STM32F4xx\Source\Templates\system_stm32f4xx.c;Drivers\CMSIS\Include\cachel1_armv7.h;Drivers\CMSIS\Include\cmsis_armcc.h;Drivers\CMSIS\Include\cmsis_armclang.h;Drivers\CMSIS\Include\cmsis_armclang_ltm.h;Drivers\CMSIS\Include\cmsis_compiler.h;Drivers\CMSIS\Include\cmsis_gcc.h;Drivers\CMSIS\Include\cmsis_iccarm.h;Drivers\CMSIS\Include\cmsis_version.h;Drivers\CMSIS\Include\core_armv81mml.h;Drivers\CMSIS\Include\core_armv8mbl.h;Drivers\CMSIS\Include\core_armv8mml.h;Drivers\CMSIS\Include\core_cm0.h;Drivers\CMSIS\Include\core_cm0plus.h;Drivers\CMSIS\Include\core_cm1.h;Drivers\CMSIS\Include\core_cm23.h;Drivers\CMSIS\Include\core_cm3.h;Drivers\CMSIS\Include\core_cm33.h;Drivers\CMSIS\Include\core_cm35p.h;Drivers\CMSIS\Include\core_cm4.h;Drivers\CMSIS\Include\core_cm55.h;Drivers\CMSIS\Include\core_cm7.h;Drivers\CMSIS\Include\core_cm85.h;Drivers\CMSIS\Include\core_sc000.h;Drivers\CMSIS\Include\core_sc300.h;Drivers\CMSIS\Include\core_starmc1.h;Drivers\CMSIS\Include\mpu_armv7.h;Drivers\CMSIS\Include\mpu_armv8.h;Drivers\CMSIS\Include\pac_armv81.h;Drivers\CMSIS\Include\pmu_armv8.h;Drivers\CMSIS\Include\tz_context.h; +LibFiles=Drivers\STM32F4xx_HAL_Driver\Inc\stm32f4xx_hal_tim.h;Drivers\STM32F4xx_HAL_Driver\Inc\stm32f4xx_hal_tim_ex.h;Drivers\STM32F4xx_HAL_Driver\Inc\stm32f4xx_hal_rcc.h;Drivers\STM32F4xx_HAL_Driver\Inc\stm32f4xx_hal_rcc_ex.h;Drivers\STM32F4xx_HAL_Driver\Inc\stm32f4xx_ll_bus.h;Drivers\STM32F4xx_HAL_Driver\Inc\stm32f4xx_ll_rcc.h;Drivers\STM32F4xx_HAL_Driver\Inc\stm32f4xx_ll_system.h;Drivers\STM32F4xx_HAL_Driver\Inc\stm32f4xx_ll_utils.h;Drivers\STM32F4xx_HAL_Driver\Inc\stm32f4xx_hal_flash.h;Drivers\STM32F4xx_HAL_Driver\Inc\stm32f4xx_hal_flash_ex.h;Drivers\STM32F4xx_HAL_Driver\Inc\stm32f4xx_hal_flash_ramfunc.h;Drivers\STM32F4xx_HAL_Driver\Inc\stm32f4xx_hal_gpio.h;Drivers\STM32F4xx_HAL_Driver\Inc\stm32f4xx_hal_gpio_ex.h;Drivers\STM32F4xx_HAL_Driver\Inc\stm32f4xx_ll_gpio.h;Drivers\STM32F4xx_HAL_Driver\Inc\stm32f4xx_hal_dma_ex.h;Drivers\STM32F4xx_HAL_Driver\Inc\stm32f4xx_hal_dma.h;Drivers\STM32F4xx_HAL_Driver\Inc\stm32f4xx_ll_dma.h;Drivers\STM32F4xx_HAL_Driver\Inc\stm32f4xx_ll_dmamux.h;Drivers\STM32F4xx_HAL_Driver\Inc\stm32f4xx_hal_pwr.h;Drivers\STM32F4xx_HAL_Driver\Inc\stm32f4xx_hal_pwr_ex.h;Drivers\STM32F4xx_HAL_Driver\Inc\stm32f4xx_ll_pwr.h;Drivers\STM32F4xx_HAL_Driver\Inc\stm32f4xx_hal_cortex.h;Drivers\STM32F4xx_HAL_Driver\Inc\stm32f4xx_ll_cortex.h;Drivers\STM32F4xx_HAL_Driver\Inc\stm32f4xx_hal.h;Drivers\STM32F4xx_HAL_Driver\Inc\Legacy\stm32_hal_legacy.h;Drivers\STM32F4xx_HAL_Driver\Inc\stm32f4xx_hal_def.h;Drivers\STM32F4xx_HAL_Driver\Inc\stm32f4xx_hal_exti.h;Drivers\STM32F4xx_HAL_Driver\Inc\stm32f4xx_ll_exti.h;Drivers\STM32F4xx_HAL_Driver\Inc\stm32f4xx_hal_i2c.h;Drivers\STM32F4xx_HAL_Driver\Inc\stm32f4xx_ll_i2c.h;Drivers\STM32F4xx_HAL_Driver\Inc\stm32f4xx_hal_i2c_ex.h;Drivers\STM32F4xx_HAL_Driver\Inc\stm32f4xx_hal_uart.h;Drivers\STM32F4xx_HAL_Driver\Inc\stm32f4xx_ll_usart.h;Middlewares\Third_Party\FreeRTOS\Source\include\croutine.h;Middlewares\Third_Party\FreeRTOS\Source\include\deprecated_definitions.h;Middlewares\Third_Party\FreeRTOS\Source\include\event_groups.h;Middlewares\Third_Party\FreeRTOS\Source\include\FreeRTOS.h;Middlewares\Third_Party\FreeRTOS\Source\include\list.h;Middlewares\Third_Party\FreeRTOS\Source\include\message_buffer.h;Middlewares\Third_Party\FreeRTOS\Source\include\mpu_prototypes.h;Middlewares\Third_Party\FreeRTOS\Source\include\mpu_wrappers.h;Middlewares\Third_Party\FreeRTOS\Source\include\portable.h;Middlewares\Third_Party\FreeRTOS\Source\include\projdefs.h;Middlewares\Third_Party\FreeRTOS\Source\include\queue.h;Middlewares\Third_Party\FreeRTOS\Source\include\semphr.h;Middlewares\Third_Party\FreeRTOS\Source\include\stack_macros.h;Middlewares\Third_Party\FreeRTOS\Source\include\StackMacros.h;Middlewares\Third_Party\FreeRTOS\Source\include\stream_buffer.h;Middlewares\Third_Party\FreeRTOS\Source\include\task.h;Middlewares\Third_Party\FreeRTOS\Source\include\timers.h;Middlewares\Third_Party\FreeRTOS\Source\include\atomic.h;Middlewares\Third_Party\FreeRTOS\Source\CMSIS_RTOS_V2\cmsis_os2.h;Middlewares\Third_Party\FreeRTOS\Source\CMSIS_RTOS_V2\cmsis_os.h;Middlewares\Third_Party\FreeRTOS\Source\CMSIS_RTOS_V2\freertos_mpool.h;Middlewares\Third_Party\FreeRTOS\Source\CMSIS_RTOS_V2\freertos_os2.h;Middlewares\Third_Party\FreeRTOS\Source\portable\GCC\ARM_CM4F\portmacro.h;Drivers\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_tim.c;Drivers\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_tim_ex.c;Drivers\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_rcc.c;Drivers\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_rcc_ex.c;Drivers\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_flash.c;Drivers\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_flash_ex.c;Drivers\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_flash_ramfunc.c;Drivers\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_gpio.c;Drivers\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_dma_ex.c;Drivers\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_dma.c;Drivers\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_pwr.c;Drivers\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_pwr_ex.c;Drivers\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_cortex.c;Drivers\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal.c;Drivers\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_exti.c;Drivers\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_i2c.c;Drivers\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_i2c_ex.c;Drivers\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_uart.c;Middlewares\Third_Party\FreeRTOS\Source\croutine.c;Middlewares\Third_Party\FreeRTOS\Source\event_groups.c;Middlewares\Third_Party\FreeRTOS\Source\list.c;Middlewares\Third_Party\FreeRTOS\Source\queue.c;Middlewares\Third_Party\FreeRTOS\Source\stream_buffer.c;Middlewares\Third_Party\FreeRTOS\Source\tasks.c;Middlewares\Third_Party\FreeRTOS\Source\timers.c;Middlewares\Third_Party\FreeRTOS\Source\CMSIS_RTOS_V2\cmsis_os2.c;Middlewares\Third_Party\FreeRTOS\Source\portable\MemMang\heap_4.c;Middlewares\Third_Party\FreeRTOS\Source\portable\GCC\ARM_CM4F\port.c;Drivers\STM32F4xx_HAL_Driver\Inc\stm32f4xx_hal_tim.h;Drivers\STM32F4xx_HAL_Driver\Inc\stm32f4xx_hal_tim_ex.h;Drivers\STM32F4xx_HAL_Driver\Inc\stm32f4xx_hal_rcc.h;Drivers\STM32F4xx_HAL_Driver\Inc\stm32f4xx_hal_rcc_ex.h;Drivers\STM32F4xx_HAL_Driver\Inc\stm32f4xx_ll_bus.h;Drivers\STM32F4xx_HAL_Driver\Inc\stm32f4xx_ll_rcc.h;Drivers\STM32F4xx_HAL_Driver\Inc\stm32f4xx_ll_system.h;Drivers\STM32F4xx_HAL_Driver\Inc\stm32f4xx_ll_utils.h;Drivers\STM32F4xx_HAL_Driver\Inc\stm32f4xx_hal_flash.h;Drivers\STM32F4xx_HAL_Driver\Inc\stm32f4xx_hal_flash_ex.h;Drivers\STM32F4xx_HAL_Driver\Inc\stm32f4xx_hal_flash_ramfunc.h;Drivers\STM32F4xx_HAL_Driver\Inc\stm32f4xx_hal_gpio.h;Drivers\STM32F4xx_HAL_Driver\Inc\stm32f4xx_hal_gpio_ex.h;Drivers\STM32F4xx_HAL_Driver\Inc\stm32f4xx_ll_gpio.h;Drivers\STM32F4xx_HAL_Driver\Inc\stm32f4xx_hal_dma_ex.h;Drivers\STM32F4xx_HAL_Driver\Inc\stm32f4xx_hal_dma.h;Drivers\STM32F4xx_HAL_Driver\Inc\stm32f4xx_ll_dma.h;Drivers\STM32F4xx_HAL_Driver\Inc\stm32f4xx_ll_dmamux.h;Drivers\STM32F4xx_HAL_Driver\Inc\stm32f4xx_hal_pwr.h;Drivers\STM32F4xx_HAL_Driver\Inc\stm32f4xx_hal_pwr_ex.h;Drivers\STM32F4xx_HAL_Driver\Inc\stm32f4xx_ll_pwr.h;Drivers\STM32F4xx_HAL_Driver\Inc\stm32f4xx_hal_cortex.h;Drivers\STM32F4xx_HAL_Driver\Inc\stm32f4xx_ll_cortex.h;Drivers\STM32F4xx_HAL_Driver\Inc\stm32f4xx_hal.h;Drivers\STM32F4xx_HAL_Driver\Inc\Legacy\stm32_hal_legacy.h;Drivers\STM32F4xx_HAL_Driver\Inc\stm32f4xx_hal_def.h;Drivers\STM32F4xx_HAL_Driver\Inc\stm32f4xx_hal_exti.h;Drivers\STM32F4xx_HAL_Driver\Inc\stm32f4xx_ll_exti.h;Drivers\STM32F4xx_HAL_Driver\Inc\stm32f4xx_hal_i2c.h;Drivers\STM32F4xx_HAL_Driver\Inc\stm32f4xx_ll_i2c.h;Drivers\STM32F4xx_HAL_Driver\Inc\stm32f4xx_hal_i2c_ex.h;Drivers\STM32F4xx_HAL_Driver\Inc\stm32f4xx_hal_uart.h;Drivers\STM32F4xx_HAL_Driver\Inc\stm32f4xx_ll_usart.h;Middlewares\Third_Party\FreeRTOS\Source\include\croutine.h;Middlewares\Third_Party\FreeRTOS\Source\include\deprecated_definitions.h;Middlewares\Third_Party\FreeRTOS\Source\include\event_groups.h;Middlewares\Third_Party\FreeRTOS\Source\include\FreeRTOS.h;Middlewares\Third_Party\FreeRTOS\Source\include\list.h;Middlewares\Third_Party\FreeRTOS\Source\include\message_buffer.h;Middlewares\Third_Party\FreeRTOS\Source\include\mpu_prototypes.h;Middlewares\Third_Party\FreeRTOS\Source\include\mpu_wrappers.h;Middlewares\Third_Party\FreeRTOS\Source\include\portable.h;Middlewares\Third_Party\FreeRTOS\Source\include\projdefs.h;Middlewares\Third_Party\FreeRTOS\Source\include\queue.h;Middlewares\Third_Party\FreeRTOS\Source\include\semphr.h;Middlewares\Third_Party\FreeRTOS\Source\include\stack_macros.h;Middlewares\Third_Party\FreeRTOS\Source\include\StackMacros.h;Middlewares\Third_Party\FreeRTOS\Source\include\stream_buffer.h;Middlewares\Third_Party\FreeRTOS\Source\include\task.h;Middlewares\Third_Party\FreeRTOS\Source\include\timers.h;Middlewares\Third_Party\FreeRTOS\Source\include\atomic.h;Middlewares\Third_Party\FreeRTOS\Source\CMSIS_RTOS_V2\cmsis_os2.h;Middlewares\Third_Party\FreeRTOS\Source\CMSIS_RTOS_V2\cmsis_os.h;Middlewares\Third_Party\FreeRTOS\Source\CMSIS_RTOS_V2\freertos_mpool.h;Middlewares\Third_Party\FreeRTOS\Source\CMSIS_RTOS_V2\freertos_os2.h;Middlewares\Third_Party\FreeRTOS\Source\portable\GCC\ARM_CM4F\portmacro.h;Drivers\CMSIS\Device\ST\STM32F4xx\Include\stm32f446xx.h;Drivers\CMSIS\Device\ST\STM32F4xx\Include\stm32f4xx.h;Drivers\CMSIS\Device\ST\STM32F4xx\Include\system_stm32f4xx.h;Drivers\CMSIS\Device\ST\STM32F4xx\Include\system_stm32f4xx.h;Drivers\CMSIS\Device\ST\STM32F4xx\Source\Templates\system_stm32f4xx.c;Drivers\CMSIS\Include\cachel1_armv7.h;Drivers\CMSIS\Include\cmsis_armcc.h;Drivers\CMSIS\Include\cmsis_armclang.h;Drivers\CMSIS\Include\cmsis_armclang_ltm.h;Drivers\CMSIS\Include\cmsis_compiler.h;Drivers\CMSIS\Include\cmsis_gcc.h;Drivers\CMSIS\Include\cmsis_iccarm.h;Drivers\CMSIS\Include\cmsis_version.h;Drivers\CMSIS\Include\core_armv81mml.h;Drivers\CMSIS\Include\core_armv8mbl.h;Drivers\CMSIS\Include\core_armv8mml.h;Drivers\CMSIS\Include\core_cm0.h;Drivers\CMSIS\Include\core_cm0plus.h;Drivers\CMSIS\Include\core_cm1.h;Drivers\CMSIS\Include\core_cm23.h;Drivers\CMSIS\Include\core_cm3.h;Drivers\CMSIS\Include\core_cm33.h;Drivers\CMSIS\Include\core_cm35p.h;Drivers\CMSIS\Include\core_cm4.h;Drivers\CMSIS\Include\core_cm55.h;Drivers\CMSIS\Include\core_cm7.h;Drivers\CMSIS\Include\core_cm85.h;Drivers\CMSIS\Include\core_sc000.h;Drivers\CMSIS\Include\core_sc300.h;Drivers\CMSIS\Include\core_starmc1.h;Drivers\CMSIS\Include\mpu_armv7.h;Drivers\CMSIS\Include\mpu_armv8.h;Drivers\CMSIS\Include\pac_armv81.h;Drivers\CMSIS\Include\pmu_armv8.h;Drivers\CMSIS\Include\tz_context.h; [PreviousUsedCubeIDEFiles] -SourceFiles=Core\Src\main.c;Core\Src\freertos.c;Core\Src\stm32f4xx_it.c;Core\Src\stm32f4xx_hal_msp.c;Core\Src\stm32f4xx_hal_timebase_tim.c;Drivers\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_tim.c;Drivers\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_tim_ex.c;Drivers\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_rcc.c;Drivers\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_rcc_ex.c;Drivers\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_flash.c;Drivers\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_flash_ex.c;Drivers\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_flash_ramfunc.c;Drivers\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_gpio.c;Drivers\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_dma_ex.c;Drivers\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_dma.c;Drivers\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_pwr.c;Drivers\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_pwr_ex.c;Drivers\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_cortex.c;Drivers\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal.c;Drivers\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_exti.c;Drivers\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_i2c.c;Drivers\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_i2c_ex.c;Drivers\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_uart.c;Middlewares\Third_Party\FreeRTOS\Source\croutine.c;Middlewares\Third_Party\FreeRTOS\Source\event_groups.c;Middlewares\Third_Party\FreeRTOS\Source\list.c;Middlewares\Third_Party\FreeRTOS\Source\queue.c;Middlewares\Third_Party\FreeRTOS\Source\stream_buffer.c;Middlewares\Third_Party\FreeRTOS\Source\tasks.c;Middlewares\Third_Party\FreeRTOS\Source\timers.c;Middlewares\Third_Party\FreeRTOS\Source\CMSIS_RTOS\cmsis_os.c;Middlewares\Third_Party\FreeRTOS\Source\portable\MemMang\heap_4.c;Middlewares\Third_Party\FreeRTOS\Source\portable\GCC\ARM_CM4F\port.c;Drivers\CMSIS\Device\ST\STM32F4xx\Source\Templates\system_stm32f4xx.c;Core\Src\system_stm32f4xx.c;Drivers\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_tim.c;Drivers\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_tim_ex.c;Drivers\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_rcc.c;Drivers\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_rcc_ex.c;Drivers\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_flash.c;Drivers\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_flash_ex.c;Drivers\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_flash_ramfunc.c;Drivers\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_gpio.c;Drivers\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_dma_ex.c;Drivers\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_dma.c;Drivers\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_pwr.c;Drivers\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_pwr_ex.c;Drivers\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_cortex.c;Drivers\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal.c;Drivers\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_exti.c;Drivers\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_i2c.c;Drivers\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_i2c_ex.c;Drivers\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_uart.c;Middlewares\Third_Party\FreeRTOS\Source\croutine.c;Middlewares\Third_Party\FreeRTOS\Source\event_groups.c;Middlewares\Third_Party\FreeRTOS\Source\list.c;Middlewares\Third_Party\FreeRTOS\Source\queue.c;Middlewares\Third_Party\FreeRTOS\Source\stream_buffer.c;Middlewares\Third_Party\FreeRTOS\Source\tasks.c;Middlewares\Third_Party\FreeRTOS\Source\timers.c;Middlewares\Third_Party\FreeRTOS\Source\CMSIS_RTOS\cmsis_os.c;Middlewares\Third_Party\FreeRTOS\Source\portable\MemMang\heap_4.c;Middlewares\Third_Party\FreeRTOS\Source\portable\GCC\ARM_CM4F\port.c;Drivers\CMSIS\Device\ST\STM32F4xx\Source\Templates\system_stm32f4xx.c;Core\Src\system_stm32f4xx.c;;;Middlewares\Third_Party\FreeRTOS\Source\croutine.c;Middlewares\Third_Party\FreeRTOS\Source\event_groups.c;Middlewares\Third_Party\FreeRTOS\Source\list.c;Middlewares\Third_Party\FreeRTOS\Source\queue.c;Middlewares\Third_Party\FreeRTOS\Source\stream_buffer.c;Middlewares\Third_Party\FreeRTOS\Source\tasks.c;Middlewares\Third_Party\FreeRTOS\Source\timers.c;Middlewares\Third_Party\FreeRTOS\Source\CMSIS_RTOS\cmsis_os.c;Middlewares\Third_Party\FreeRTOS\Source\portable\MemMang\heap_4.c;Middlewares\Third_Party\FreeRTOS\Source\portable\GCC\ARM_CM4F\port.c; -HeaderPath=Drivers\STM32F4xx_HAL_Driver\Inc;Drivers\STM32F4xx_HAL_Driver\Inc\Legacy;Middlewares\Third_Party\FreeRTOS\Source\include;Middlewares\Third_Party\FreeRTOS\Source\CMSIS_RTOS;Middlewares\Third_Party\FreeRTOS\Source\portable\GCC\ARM_CM4F;Drivers\CMSIS\Device\ST\STM32F4xx\Include;Drivers\CMSIS\Include;Core\Inc; +SourceFiles=Core\Src\main.c;Core\Src\freertos.c;Core\Src\stm32f4xx_it.c;Core\Src\stm32f4xx_hal_msp.c;Core\Src\stm32f4xx_hal_timebase_tim.c;Drivers\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_tim.c;Drivers\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_tim_ex.c;Drivers\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_rcc.c;Drivers\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_rcc_ex.c;Drivers\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_flash.c;Drivers\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_flash_ex.c;Drivers\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_flash_ramfunc.c;Drivers\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_gpio.c;Drivers\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_dma_ex.c;Drivers\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_dma.c;Drivers\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_pwr.c;Drivers\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_pwr_ex.c;Drivers\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_cortex.c;Drivers\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal.c;Drivers\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_exti.c;Drivers\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_i2c.c;Drivers\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_i2c_ex.c;Drivers\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_uart.c;Middlewares\Third_Party\FreeRTOS\Source\croutine.c;Middlewares\Third_Party\FreeRTOS\Source\event_groups.c;Middlewares\Third_Party\FreeRTOS\Source\list.c;Middlewares\Third_Party\FreeRTOS\Source\queue.c;Middlewares\Third_Party\FreeRTOS\Source\stream_buffer.c;Middlewares\Third_Party\FreeRTOS\Source\tasks.c;Middlewares\Third_Party\FreeRTOS\Source\timers.c;Middlewares\Third_Party\FreeRTOS\Source\CMSIS_RTOS_V2\cmsis_os2.c;Middlewares\Third_Party\FreeRTOS\Source\portable\MemMang\heap_4.c;Middlewares\Third_Party\FreeRTOS\Source\portable\GCC\ARM_CM4F\port.c;Drivers\CMSIS\Device\ST\STM32F4xx\Source\Templates\system_stm32f4xx.c;Core\Src\system_stm32f4xx.c;Drivers\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_tim.c;Drivers\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_tim_ex.c;Drivers\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_rcc.c;Drivers\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_rcc_ex.c;Drivers\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_flash.c;Drivers\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_flash_ex.c;Drivers\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_flash_ramfunc.c;Drivers\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_gpio.c;Drivers\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_dma_ex.c;Drivers\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_dma.c;Drivers\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_pwr.c;Drivers\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_pwr_ex.c;Drivers\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_cortex.c;Drivers\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal.c;Drivers\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_exti.c;Drivers\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_i2c.c;Drivers\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_i2c_ex.c;Drivers\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_uart.c;Middlewares\Third_Party\FreeRTOS\Source\croutine.c;Middlewares\Third_Party\FreeRTOS\Source\event_groups.c;Middlewares\Third_Party\FreeRTOS\Source\list.c;Middlewares\Third_Party\FreeRTOS\Source\queue.c;Middlewares\Third_Party\FreeRTOS\Source\stream_buffer.c;Middlewares\Third_Party\FreeRTOS\Source\tasks.c;Middlewares\Third_Party\FreeRTOS\Source\timers.c;Middlewares\Third_Party\FreeRTOS\Source\CMSIS_RTOS_V2\cmsis_os2.c;Middlewares\Third_Party\FreeRTOS\Source\portable\MemMang\heap_4.c;Middlewares\Third_Party\FreeRTOS\Source\portable\GCC\ARM_CM4F\port.c;Drivers\CMSIS\Device\ST\STM32F4xx\Source\Templates\system_stm32f4xx.c;Core\Src\system_stm32f4xx.c;;;Middlewares\Third_Party\FreeRTOS\Source\croutine.c;Middlewares\Third_Party\FreeRTOS\Source\event_groups.c;Middlewares\Third_Party\FreeRTOS\Source\list.c;Middlewares\Third_Party\FreeRTOS\Source\queue.c;Middlewares\Third_Party\FreeRTOS\Source\stream_buffer.c;Middlewares\Third_Party\FreeRTOS\Source\tasks.c;Middlewares\Third_Party\FreeRTOS\Source\timers.c;Middlewares\Third_Party\FreeRTOS\Source\CMSIS_RTOS_V2\cmsis_os2.c;Middlewares\Third_Party\FreeRTOS\Source\portable\MemMang\heap_4.c;Middlewares\Third_Party\FreeRTOS\Source\portable\GCC\ARM_CM4F\port.c; +HeaderPath=Drivers\STM32F4xx_HAL_Driver\Inc;Drivers\STM32F4xx_HAL_Driver\Inc\Legacy;Middlewares\Third_Party\FreeRTOS\Source\include;Middlewares\Third_Party\FreeRTOS\Source\CMSIS_RTOS_V2;Middlewares\Third_Party\FreeRTOS\Source\portable\GCC\ARM_CM4F;Drivers\CMSIS\Device\ST\STM32F4xx\Include;Drivers\CMSIS\Include;Core\Inc; CDefines=USE_HAL_DRIVER;STM32F446xx;USE_HAL_DRIVER;USE_HAL_DRIVER; [PreviousGenFiles] diff --git a/RTOS_Dual_Sensor_Single_Board_Testing/Core/Inc/FreeRTOSConfig.h b/RTOS_Dual_Sensor_Single_Board_Testing/Core/Inc/FreeRTOSConfig.h index d277b3c..3a25445 100644 --- a/RTOS_Dual_Sensor_Single_Board_Testing/Core/Inc/FreeRTOSConfig.h +++ b/RTOS_Dual_Sensor_Single_Board_Testing/Core/Inc/FreeRTOSConfig.h @@ -52,6 +52,10 @@ #include extern uint32_t SystemCoreClock; #endif +#ifndef CMSIS_device_header +#define CMSIS_device_header "stm32f4xx.h" +#endif /* CMSIS_device_header */ + #define configENABLE_FPU 1 #define configENABLE_MPU 0 @@ -62,14 +66,17 @@ #define configUSE_TICK_HOOK 0 #define configCPU_CLOCK_HZ ( SystemCoreClock ) #define configTICK_RATE_HZ ((TickType_t)1000) -#define configMAX_PRIORITIES ( 7 ) +#define configMAX_PRIORITIES ( 56 ) #define configMINIMAL_STACK_SIZE ((uint16_t)128) #define configTOTAL_HEAP_SIZE ((size_t)15360) #define configMAX_TASK_NAME_LEN ( 16 ) +#define configUSE_TRACE_FACILITY 1 #define configUSE_16_BIT_TICKS 0 #define configUSE_MUTEXES 1 #define configQUEUE_REGISTRY_SIZE 8 -#define configUSE_PORT_OPTIMISED_TASK_SELECTION 1 +#define configUSE_RECURSIVE_MUTEXES 1 +#define configUSE_COUNTING_SEMAPHORES 1 +#define configUSE_PORT_OPTIMISED_TASK_SELECTION 0 /* USER CODE BEGIN MESSAGE_BUFFER_LENGTH_TYPE */ /* Defaults to size_t for backward compatibility, but can be changed if lengths will always be less than the number of bytes in a size_t. */ @@ -80,6 +87,20 @@ #define configUSE_CO_ROUTINES 0 #define configMAX_CO_ROUTINE_PRIORITIES ( 2 ) +/* Software timer definitions. */ +#define configUSE_TIMERS 1 +#define configTIMER_TASK_PRIORITY ( 2 ) +#define configTIMER_QUEUE_LENGTH 10 +#define configTIMER_TASK_STACK_DEPTH 256 + +/* CMSIS-RTOS V2 flags */ +#define configUSE_OS2_THREAD_SUSPEND_RESUME 1 +#define configUSE_OS2_THREAD_ENUMERATE 1 +#define configUSE_OS2_EVENTFLAGS_FROM_ISR 1 +#define configUSE_OS2_THREAD_FLAGS 1 +#define configUSE_OS2_TIMER 1 +#define configUSE_OS2_MUTEX 1 + /* Set the following definitions to 1 to include the API function, or zero to exclude the API function. */ #define INCLUDE_vTaskPrioritySet 1 @@ -87,9 +108,20 @@ to exclude the API function. */ #define INCLUDE_vTaskDelete 1 #define INCLUDE_vTaskCleanUpResources 0 #define INCLUDE_vTaskSuspend 1 -#define INCLUDE_vTaskDelayUntil 0 +#define INCLUDE_vTaskDelayUntil 1 #define INCLUDE_vTaskDelay 1 #define INCLUDE_xTaskGetSchedulerState 1 +#define INCLUDE_xTimerPendFunctionCall 1 +#define INCLUDE_xQueueGetMutexHolder 1 +#define INCLUDE_uxTaskGetStackHighWaterMark 1 +#define INCLUDE_xTaskGetCurrentTaskHandle 1 +#define INCLUDE_eTaskGetState 1 + +/* + * The CMSIS-RTOS V2 FreeRTOS wrapper is dependent on the heap implementation used + * by the application thus the correct define need to be enabled below + */ +#define USE_FreeRTOS_HEAP_4 /* Cortex-M specific definitions. */ #ifdef __NVIC_PRIO_BITS @@ -127,10 +159,9 @@ standard names. */ #define vPortSVCHandler SVC_Handler #define xPortPendSVHandler PendSV_Handler -/* IMPORTANT: This define is commented when used with STM32Cube firmware, when the timebase source is SysTick, - to prevent overwriting SysTick_Handler defined within STM32Cube HAL */ +/* IMPORTANT: After 10.3.1 update, Systick_Handler comes from NVIC (if SYS timebase = systick), otherwise from cmsis_os2.c */ -#define xPortSysTickHandler SysTick_Handler +#define USE_CUSTOM_SYSTICK_HANDLER_IMPLEMENTATION 0 /* USER CODE BEGIN Defines */ /* Section where parameter definitions can be added (for instance, to override default ones in FreeRTOS.h) */ diff --git a/RTOS_Dual_Sensor_Single_Board_Testing/Core/Src/freertos.c b/RTOS_Dual_Sensor_Single_Board_Testing/Core/Src/freertos.c index 919b76a..ac67769 100644 --- a/RTOS_Dual_Sensor_Single_Board_Testing/Core/Src/freertos.c +++ b/RTOS_Dual_Sensor_Single_Board_Testing/Core/Src/freertos.c @@ -52,23 +52,8 @@ /* USER CODE END FunctionPrototypes */ -/* GetIdleTaskMemory prototype (linked to static allocation support) */ -void vApplicationGetIdleTaskMemory( StaticTask_t **ppxIdleTaskTCBBuffer, StackType_t **ppxIdleTaskStackBuffer, uint32_t *pulIdleTaskStackSize ); - -/* USER CODE BEGIN GET_IDLE_TASK_MEMORY */ -static StaticTask_t xIdleTaskTCBBuffer; -static StackType_t xIdleStack[configMINIMAL_STACK_SIZE]; - -void vApplicationGetIdleTaskMemory( StaticTask_t **ppxIdleTaskTCBBuffer, StackType_t **ppxIdleTaskStackBuffer, uint32_t *pulIdleTaskStackSize ) -{ - *ppxIdleTaskTCBBuffer = &xIdleTaskTCBBuffer; - *ppxIdleTaskStackBuffer = &xIdleStack[0]; - *pulIdleTaskStackSize = configMINIMAL_STACK_SIZE; - /* place for user code */ -} -/* USER CODE END GET_IDLE_TASK_MEMORY */ - /* Private application code --------------------------------------------------*/ /* USER CODE BEGIN Application */ /* USER CODE END Application */ + diff --git a/RTOS_Dual_Sensor_Single_Board_Testing/Core/Src/main.c b/RTOS_Dual_Sensor_Single_Board_Testing/Core/Src/main.c index de7e78f..1899900 100644 --- a/RTOS_Dual_Sensor_Single_Board_Testing/Core/Src/main.c +++ b/RTOS_Dual_Sensor_Single_Board_Testing/Core/Src/main.c @@ -52,30 +52,40 @@ DMA_HandleTypeDef hdma_i2c1_rx; UART_HandleTypeDef huart2; -osThreadId defaultTaskHandle; -osThreadId SensorReadingHandle; -osThreadId Sensor2ReadingHandle; +/* Definitions for defaultTask */ +osThreadId_t defaultTaskHandle; +const osThreadAttr_t defaultTask_attributes = { + .name = "defaultTask", + .stack_size = 1024 * 4, + .priority = (osPriority_t) osPriorityNormal, +}; +/* Definitions for SensorReading */ +osThreadId_t SensorReadingHandle; +const osThreadAttr_t SensorReading_attributes = { + .name = "SensorReading", + .stack_size = 1024 * 4, + .priority = (osPriority_t) osPriorityLow, +}; +/* Definitions for Sensor2Reading */ +osThreadId_t Sensor2ReadingHandle; +const osThreadAttr_t Sensor2Reading_attributes = { + .name = "Sensor2Reading", + .stack_size = 1024 * 4, + .priority = (osPriority_t) osPriorityNormal, +}; +/* Definitions for SensorQueue1 */ +osMessageQueueId_t SensorQueue1Handle; +const osMessageQueueAttr_t SensorQueue1_attributes = { + .name = "SensorQueue1" +}; /* USER CODE BEGIN PV */ MPU6050_HandleTypeDef hmpu1; MPU6050_HandleTypeDef hmpu2; -MadgwickFilter madgwick; - -// sensor reading flags -uint8_t sensor1_flag = 0; -uint8_t sensor2_flag = 0; - - -char output[128]; -int16_t copy_raw_data[6]; //[ax, ay, az, gx, gy, gz] -float processed_data[6]; //[Ax, Ay, Az, Gx, Gy, Gz] - -uint32_t last_transmit = 0; -uint32_t now = 0; +MadgwickFilter Sensor1Quat; +MadgwickFilter Sensor2Quat; +char output[256]; float roll, pitch, yaw; // Madgwick euler angles - - - /* USER CODE END PV */ /* Private function prototypes -----------------------------------------------*/ @@ -84,9 +94,9 @@ static void MX_GPIO_Init(void); static void MX_DMA_Init(void); static void MX_USART2_UART_Init(void); static void MX_I2C1_Init(void); -void StartDefaultTask(void const * argument); -void StartSensorReading(void const * argument); -void StartSensor2Reading(void const * argument); +void StartDefaultTask(void *argument); +void StartSensorReading(void *argument); +void StartSensor2Reading(void *argument); /* USER CODE BEGIN PFP */ @@ -137,6 +147,9 @@ int main(void) /* USER CODE END 2 */ + /* Init scheduler */ + osKernelInitialize(); + /* USER CODE BEGIN RTOS_MUTEX */ /* add mutexes, ... */ /* USER CODE END RTOS_MUTEX */ @@ -149,27 +162,32 @@ int main(void) /* start timers, add new ones, ... */ /* USER CODE END RTOS_TIMERS */ + /* Create the queue(s) */ + /* creation of SensorQueue1 */ + SensorQueue1Handle = osMessageQueueNew (5, sizeof(ProcessedData_HandleTypeDef), &SensorQueue1_attributes); + /* USER CODE BEGIN RTOS_QUEUES */ /* add queues, ... */ /* USER CODE END RTOS_QUEUES */ /* Create the thread(s) */ - /* definition and creation of defaultTask */ - osThreadDef(defaultTask, StartDefaultTask, osPriorityNormal, 0, 1024); - defaultTaskHandle = osThreadCreate(osThread(defaultTask), NULL); + /* creation of defaultTask */ + defaultTaskHandle = osThreadNew(StartDefaultTask, NULL, &defaultTask_attributes); - /* definition and creation of SensorReading */ - osThreadDef(SensorReading, StartSensorReading, osPriorityIdle, 0, 1024); - SensorReadingHandle = osThreadCreate(osThread(SensorReading), NULL); + /* creation of SensorReading */ + SensorReadingHandle = osThreadNew(StartSensorReading, NULL, &SensorReading_attributes); - /* definition and creation of Sensor2Reading */ - osThreadDef(Sensor2Reading, StartSensor2Reading, osPriorityNormal, 0, 1024); - Sensor2ReadingHandle = osThreadCreate(osThread(Sensor2Reading), NULL); + /* creation of Sensor2Reading */ + Sensor2ReadingHandle = osThreadNew(StartSensor2Reading, NULL, &Sensor2Reading_attributes); /* USER CODE BEGIN RTOS_THREADS */ /* add threads, ... */ /* USER CODE END RTOS_THREADS */ + /* USER CODE BEGIN RTOS_EVENTS */ + /* add events, ... */ + /* USER CODE END RTOS_EVENTS */ + /* Start scheduler */ osKernelStart(); @@ -366,85 +384,38 @@ static void MX_GPIO_Init(void) * @retval None */ /* USER CODE END Header_StartDefaultTask */ -void StartDefaultTask(void const * argument) +void StartDefaultTask(void *argument) { /* USER CODE BEGIN 5 */ - // Initialize MPU struct - hmpu1.address = GYR1_Add; - hmpu1.hi2c = &hi2c1; - hmpu1.accel_range = 0x02; - hmpu1.gyro_range = 0x02; - hmpu1.accel_factor = 4096.0; - hmpu1.gyro_factor = 32.8; - hmpu1.calibrate = 0; - - - data_ready = 0; - dma_ready = 1; - - - Init_MPU6050(&hmpu1, &huart2); - Calibrate_MPU(&hmpu1, &huart2); - - MadgwickFilter_Init(&madgwick, 125.0f, 0.1f); - start_dma_transfer(&hmpu1); - + MadgwickFilter_Init(&Sensor1Quat, 20.0f, 0.1f); + MadgwickFilter_Init(&Sensor2Quat, 20.0f, 0.1f); + ProcessedData_HandleTypeDef RecievedData; /* Infinite loop */ for(;;) { - if (data_ready){ - // copy the data so it doesnt get changed while working on it - // accelerometer - copy_raw_data[0] = raw_data[0]; - copy_raw_data[1] = raw_data[1]; - copy_raw_data[2] = raw_data[2]; - // gyro - copy_raw_data[3] = raw_data[3]; - copy_raw_data[4] = raw_data[4]; - copy_raw_data[5] = raw_data[5]; + osMessageQueueGet(SensorQueue1Handle, &RecievedData, NULL, osWaitForever); - // DEBUG - //sprintf(output, "RAW: %02X %02X %02X %02X %02X %02X\n", ax_copy, ay_copy, az_copy, gx_copy, gy_copy, gz_copy); + // Update Madgwick filter with processed data + MadgwickFilter_Update(&Sensor1Quat, RecievedData.Sensor1Data[3], RecievedData.Sensor1Data[4], RecievedData.Sensor1Data[5], // Gx, Gy, Gz + RecievedData.Sensor1Data[0], RecievedData.Sensor1Data[1], RecievedData.Sensor1Data[2]); // Ax, Ay, Az + MadgwickFilter_Update(&Sensor2Quat, RecievedData.Sensor2Data[3], RecievedData.Sensor2Data[4], RecievedData.Sensor2Data[5], // Gx, Gy, Gz + RecievedData.Sensor2Data[0], RecievedData.Sensor2Data[1], RecievedData.Sensor2Data[2]); // Ax, Ay, Az - data_ready = 0; - processed_data[0] = (float)copy_raw_data[0]/hmpu->accel_factor; - processed_data[1] = (float)copy_raw_data[1]/hmpu->accel_factor; - processed_data[2] = (float)copy_raw_data[2]/hmpu->accel_factor; - processed_data[3] = (float)copy_raw_data[3]/hmpu->gyro_factor; - processed_data[4] = (float)copy_raw_data[4]/hmpu->gyro_factor; - processed_data[5] = (float)copy_raw_data[5]/hmpu->gyro_factor; + // Get Euler angles + MadgwickFilter_GetEulerAngles(&Sensor1Quat, &roll, &pitch, &yaw); + MadgwickFilter_GetEulerAngles(&Sensor2Quat, &roll, &pitch, &yaw); - if(hmpu->calibrate) { - processed_data[0] -= hmpu->accel_bias[0]; - processed_data[1] -= hmpu->accel_bias[1]; - processed_data[2] -= hmpu->accel_bias[2]; - processed_data[3] -= hmpu->gyro_bias[0]; - processed_data[4] -= hmpu->gyro_bias[1]; - processed_data[5] -= hmpu->gyro_bias[2]; - } + sendQuat(&huart2, &hmpu1, &Sensor1Quat); +// // Output orientation +// sprintf(output, "Sensor 1 qw: %.4f qx: %.4f qy: %.4f qz: %.4f\n", +// Sensor1Quat.q[0], Sensor1Quat.q[1], Sensor1Quat.q[2], Sensor1Quat.q[3]); +// HAL_UART_Transmit(&huart2, (uint8_t*)output, strlen(output), 250); +// +// sprintf(output, "Sensor 2 qw: %.4f qx: %.4f qy: %.4f qz: %.4f\n", +// Sensor2Quat.q[0], Sensor2Quat.q[1], Sensor2Quat.q[2], Sensor2Quat.q[3]); +// HAL_UART_Transmit(&huart2, (uint8_t*)output, strlen(output), 250); - start_dma_transfer(&hmpu1); - // Update Madgwick filter with processed data - MadgwickFilter_Update(&madgwick, processed_data[3], processed_data[4], processed_data[5], // Gx, Gy, Gz - processed_data[0], processed_data[1], processed_data[2]); // Ax, Ay, Az - - // Get Euler angles - MadgwickFilter_GetEulerAngles(&madgwick, &roll, &pitch, &yaw); - - // Output orientation - now = HAL_GetTick(); - if (now - last_transmit >= 50) { // Limit to 5 Hz (every 50ms) - sprintf(output, "qw: %.4f qx: %.4f qy: %.4f qz: %.4f\n", - madgwick.q[0], madgwick.q[1], madgwick.q[2], madgwick.q[3]); - HAL_UART_Transmit(&huart2, (uint8_t*)output, strlen(output), 250); - last_transmit = now; - } -// sprintf(output, "Roll: %.2f Pitch: %.2f Yaw: %.2f\n", roll, pitch, yaw); -// HAL_UART_Transmit(&huart2, (uint8_t*)output, strlen(output), 250); - - start_dma_transfer(&hmpu1); - } } /* USER CODE END 5 */ } @@ -456,7 +427,7 @@ void StartDefaultTask(void const * argument) * @retval None */ /* USER CODE END Header_StartSensorReading */ -void StartSensorReading(void const * argument) +void StartSensorReading(void *argument) { /* USER CODE BEGIN StartSensorReading */ // set the sensor struct @@ -468,6 +439,7 @@ void StartSensorReading(void const * argument) hmpu1.gyro_factor = 32.8; hmpu1.calibrate = 0; + hmpu2.address = GYR2_Add; hmpu2.hi2c = &hi2c1; hmpu2.accel_range = 0x02; @@ -475,22 +447,49 @@ void StartSensorReading(void const * argument) hmpu2.accel_factor = 4096.0; hmpu2.gyro_factor = 32.8; hmpu2.calibrate = 0; - // initialize and calibrate both sensors - Init_MPU6050(&hmpu1, &huart2); - Calibrate_MPU(&hmpu1, &huart2); - Init_MPU6050(&hmpu2, &huart2); - Calibrate_MPU(&hmpu2, &huart2); + xSensorReadingTask = xTaskGetCurrentTaskHandle(); // hold the sensor data - uint8_t binarySensorData[14]; - int16_t rawData[6]; + uint8_t binarySensor1Data[14]; + uint8_t binarySensor2Data[14]; +// float processedData[6]; + ProcessedData_HandleTypeDef ProcessedData; + + // initialize and calibrate both sensors + Init_MPU6050(&hmpu1, &huart2); + calibrate_Sensor(&hmpu1, &huart2); + + Init_MPU6050(&hmpu2, &huart2); + calibrate_Sensor(&hmpu2, &huart2); /* Infinite loop */ for(;;) { + read_dma(&hmpu1, binarySensor1Data); + read_dma(&hmpu1, binarySensor2Data); - osDelay(1); + process_binaryData(&hmpu1, binarySensor1Data, ProcessedData.Sensor1Data); + process_binaryData(&hmpu1, binarySensor2Data, ProcessedData.Sensor2Data); + + osMessageQueuePut(SensorQueue1Handle, &ProcessedData, NULL, 5); + +// // Update Madgwick filter with processed data +// MadgwickFilter_Update(&madgwick, processedData[3], processedData[4], processedData[5], // Gx, Gy, Gz +// processedData[0], processedData[1], processedData[2]); // Ax, Ay, Az +// +// // Get Euler angles +// MadgwickFilter_GetEulerAngles(&madgwick, &roll, &pitch, &yaw); +// +// // Output orientation +// sprintf(output, "qw: %.4f qx: %.4f qy: %.4f qz: %.4f\n", +// madgwick.q[0], madgwick.q[1], madgwick.q[2], madgwick.q[3]); +// HAL_UART_Transmit(&huart2, (uint8_t*)output, strlen(output), 250); + +// sprintf(output, "Roll: %.2f Pitch: %.2f Yaw: %.2f\n", roll, pitch, yaw); +// HAL_UART_Transmit(&huart2, (uint8_t*)output, strlen(output), 250); + + osDelay(50); } /* USER CODE END StartSensorReading */ } @@ -502,7 +501,7 @@ void StartSensorReading(void const * argument) * @retval None */ /* USER CODE END Header_StartSensor2Reading */ -void StartSensor2Reading(void const * argument) +void StartSensor2Reading(void *argument) { /* USER CODE BEGIN StartSensor2Reading */ // Initialize MPU struct @@ -515,9 +514,9 @@ void StartSensor2Reading(void const * argument) hmpu2.calibrate = 0; // init, calibrate and start mpu - Init_MPU6050(&hmpu2, &huart2); - Calibrate_MPU(&hmpu2, &huart2); - start_dma_transfer(&hmpu2); + //Init_MPU6050(&hmpu2, &huart2); + //Calibrate_MPU(&hmpu2, &huart2); + //start_dma_transfer(&hmpu2); /* Infinite loop */ for(;;) { diff --git a/RTOS_Dual_Sensor_Single_Board_Testing/Core/Src/mpu6050.c b/RTOS_Dual_Sensor_Single_Board_Testing/Core/Src/mpu6050.c index 1c81591..367a975 100644 --- a/RTOS_Dual_Sensor_Single_Board_Testing/Core/Src/mpu6050.c +++ b/RTOS_Dual_Sensor_Single_Board_Testing/Core/Src/mpu6050.c @@ -3,35 +3,84 @@ #include #include "mpu6050.h" #include +#include "madgwick.h" +// FreeRTOS Header +#include "FreeRTOS.h" +#include "task.h" +#include "semphr.h" UART_HandleTypeDef *huart_mpu; MPU6050_HandleTypeDef *hmpu; uint8_t sensorData[14]; +TaskHandle_t xSensorReadingTask = NULL; // using volatile variables so that the calculation of the DMA callback can be handled in the main loop volatile int16_t raw_data[6]; -volatile uint8_t data_ready = 0; -volatile uint8_t dma_ready = 1; +void sendQuat (UART_HandleTypeDef *uart, MPU6050_HandleTypeDef *mpu, MadgwickFilter *quat) { + QuaternionData FrameQuat; -// new function to initiate dma transter -HAL_StatusTypeDef start_dma_transfer(MPU6050_HandleTypeDef *mpu) { - // check if previous transfer is complete before initiating new one, else return HAL_BUSY - if (dma_ready) { - dma_ready = 0; - return HAL_I2C_Mem_Read_DMA(mpu->hi2c, mpu->address, MPU6050_ACC_MEAS_REG, I2C_MEMADD_SIZE_8BIT, sensorData, 14); + FrameQuat.StartByte = PACKET_START_BYTE; + FrameQuat.SensorAddress = mpu->address; + FrameQuat.qw = quat->q[0]; + FrameQuat.qx = quat->q[1]; + FrameQuat.qy = quat->q[2]; + FrameQuat.qz = quat->q[3]; + FrameQuat.EndByte = PACKET_END_BYTE; + + HAL_UART_Transmit(uart, (uint8_t*)&FrameQuat, sizeof(FrameQuat), 50); +} + +void read_dma (MPU6050_HandleTypeDef *mpu, uint8_t binaryData[]) { + if(HAL_I2C_Mem_Read_DMA(mpu->hi2c, mpu->address, MPU6050_ACC_MEAS_REG, I2C_MEMADD_SIZE_8BIT, binaryData, 14) == HAL_OK) { + ulTaskNotifyTake(pdTRUE, pdMS_TO_TICKS(10)); + } +} + +float* process_binaryData (MPU6050_HandleTypeDef *mpu, uint8_t binarySensorData[], float processedData[]) { + int16_t rawData[6]; //[Ax, Ay, Az, Gx, Gy, Gz] + + // accelerometer + rawData[0] = (int16_t)(binarySensorData[0] << 8 | binarySensorData[1]); + rawData[1] = (int16_t)(binarySensorData[2] << 8 | binarySensorData[3]); + rawData[2] = (int16_t)(binarySensorData[4] << 8 | binarySensorData[5]); + // gyro + rawData[3] = (int16_t)(binarySensorData[8] << 8 | binarySensorData[9]); + rawData[4] = (int16_t)(binarySensorData[10] << 8 | binarySensorData[11]); + rawData[5] = (int16_t)(binarySensorData[12] << 8 | binarySensorData[13]); + + // processedData [ax, ay, az, gx, gy, gz] + processedData[0] = (float)rawData[0]/mpu->accel_factor; + processedData[1] = (float)rawData[1]/mpu->accel_factor; + processedData[2] = (float)rawData[2]/mpu->accel_factor; + processedData[3] = (float)rawData[3]/mpu->gyro_factor; + processedData[4] = (float)rawData[4]/mpu->gyro_factor; + processedData[5] = (float)rawData[5]/mpu->gyro_factor; + + if (mpu->calibrate) { + processedData[0] -= mpu->accel_bias[0]; + processedData[1] -= mpu->accel_bias[1]; + processedData[2] -= mpu->accel_bias[2]; + processedData[3] -= mpu->gyro_bias[0]; + processedData[4] -= mpu->gyro_bias[1]; + processedData[5] -= mpu->gyro_bias[2]; } - return HAL_BUSY; + return processedData; } -// custom function to read device status, because HAL_I2C_IsDeviceReady is apparently -// often buggy in its implementation - not using it currently -HAL_StatusTypeDef check_mpu6050_ready(MPU6050_HandleTypeDef *mpu) { - uint8_t dummy; - return HAL_I2C_Mem_Read(mpu->hi2c, mpu->address, 0x75, I2C_MEMADD_SIZE_8BIT, &dummy, 1, 100); +void HAL_I2C_MemRxCpltCallback(I2C_HandleTypeDef *I2C_address) { + // all this function does now is alarm the sensor reading task that the + // dma read is finished + BaseType_t xHigherPriorityTaskWoken = pdFALSE; + if (I2C_address -> Instance == I2C1) { + vTaskNotifyGiveFromISR(xSensorReadingTask, &xHigherPriorityTaskWoken); + } + portYIELD_FROM_ISR(xHigherPriorityTaskWoken); + } + void Init_MPU6050 (MPU6050_HandleTypeDef *mpu, UART_HandleTypeDef *uart) { uint8_t data; uint8_t readback; @@ -115,7 +164,6 @@ void Init_MPU6050 (MPU6050_HandleTypeDef *mpu, UART_HandleTypeDef *uart) { HAL_I2C_Mem_Read_DMA(mpu->hi2c, mpu->address, MPU6050_ACC_MEAS_REG, I2C_MEMADD_SIZE_8BIT, sensorData, 14); } - void setRange_MPU (MPU6050_HandleTypeDef *mpu, UART_HandleTypeDef *uart) { char buffer[128]; @@ -158,108 +206,61 @@ void setRange_MPU (MPU6050_HandleTypeDef *mpu, UART_HandleTypeDef *uart) { } } -void Calibrate_MPU (MPU6050_HandleTypeDef *mpu, UART_HandleTypeDef *uart){ - const uint16_t num_samples = 1000; - int32_t accel_sum[3] = {0, 0, 0}; - int32_t gyro_sum[3] = {0, 0, 0}; - int16_t local_data[6]; +void calibrate_Sensor(MPU6050_HandleTypeDef *mpu, UART_HandleTypeDef *uart) { + const uint16_t num_samples = 1500; + uint16_t samples_taken = 0; + uint8_t binarySensorData[14]; + float processedData[6]; + float accel_sum[3] = {0.0, 0.0, 0.0}; + float gyro_sum[3] = {0.0, 0.0, 0.0}; char buffer[256]; - uint16_t i = 0, samples_taken = 0; - hmpu=mpu; sprintf(buffer, "Starting calibration at address: 0x%02X\nKeep the sensor still during calibration...\n", mpu->address >> 1); //sprintf(buffer + strlen(buffer), "Keep the sensor still during calibration...\n"); HAL_UART_Transmit(uart, (uint8_t*)buffer, strlen(buffer), 100); - // check if dma ready and i2c - data_ready = 0; - dma_ready = 1; + for (int i = 0; i < num_samples; i++) { + read_dma(mpu, binarySensorData); + process_binaryData(mpu, binarySensorData, processedData); + accel_sum[0] += processedData[0]; + accel_sum[1] += processedData[1]; + accel_sum[2] += processedData[2]; + gyro_sum[0] += processedData[3]; + gyro_sum[1] += processedData[4]; + gyro_sum[2] += processedData[5]; - if (HAL_I2C_GetState(mpu->hi2c) == HAL_I2C_STATE_READY) { - start_dma_transfer(hmpu); - } - - // Check if data is already being collected, start otherwise -// if (!data_ready) { -// HAL_I2C_Mem_Read_DMA(mpu->hi2c, mpu->address, MPU6050_ACC_MEAS_REG, I2C_MEMADD_SIZE_8BIT, sensorData, 14); -// HAL_Delay(10); -// } - - // Discard first 50 readings to let the sensor stabilize - for (i = 0; i < 50;) { - if (data_ready) { - data_ready = 0; - i++; - - start_dma_transfer(hmpu); + // Give progress to user every 100 samples taken + if (i % 100 == 0) { + sprintf(buffer, "Calibration progress: %d%%\n", (i*100)/num_samples); + HAL_UART_Transmit(uart, (uint8_t*)buffer, strlen(buffer), 100); } - HAL_Delay(1); - } - // Reset counters for actual calibration - i = 0; - samples_taken = 0; + samples_taken++; - // Collect and sum the samples - while (i < num_samples) { - if (data_ready) { - // Copy sensor data to local array to avoid data loss - local_data[0] = raw_data[0]; - local_data[1] = raw_data[1]; - local_data[2] = raw_data[2]; - local_data[3] = raw_data[3]; - local_data[4] = raw_data[4]; - local_data[5] = raw_data[5]; - - // Reset data gathering flag - data_ready = 0; - - // Add to the sum arrays - accel_sum[0] += local_data[0]; - accel_sum[1] += local_data[1]; - accel_sum[2] += local_data[2]; - gyro_sum[0] += local_data[3]; - gyro_sum[1] += local_data[4]; - gyro_sum[2] += local_data[5]; - - samples_taken++; - i++; - - // Give progress to user every 100 samples taken - if (i % 100 == 0) { - sprintf(buffer, "Calibration progress: %d%%\n", (i*100)/num_samples); - HAL_UART_Transmit(uart, (uint8_t*)buffer, strlen(buffer), 100); - } - - start_dma_transfer(hmpu); - } else { - // Small delay to prevent CPU maxing out - HAL_Delay(1); - } } if (samples_taken > 0) { // Calculate bias values - mpu->accel_bias[0] = (float)accel_sum[0] / samples_taken / mpu->accel_factor; - mpu->accel_bias[1] = (float)accel_sum[1] / samples_taken / mpu->accel_factor; - mpu->accel_bias[2] = (float)accel_sum[2] / samples_taken / mpu->accel_factor; + mpu->accel_bias[0] = accel_sum[0] / samples_taken; + mpu->accel_bias[1] = accel_sum[1] / samples_taken; + mpu->accel_bias[2] = accel_sum[2] / samples_taken; // Subtract 1g from z-axis to account for gravity mpu->accel_bias[2] -= 1.0f; - mpu->gyro_bias[0] = (float)gyro_sum[0] / samples_taken / mpu->gyro_factor; - mpu->gyro_bias[1] = (float)gyro_sum[1] / samples_taken / mpu->gyro_factor; - mpu->gyro_bias[2] = (float)gyro_sum[2] / samples_taken / mpu->gyro_factor; + mpu->gyro_bias[0] = gyro_sum[0] / samples_taken; + mpu->gyro_bias[1] = gyro_sum[1] / samples_taken; + mpu->gyro_bias[2] = gyro_sum[2] / samples_taken; // Set the calibration flag mpu->calibrate = 1; // Print results sprintf(buffer, "Calibration successful!\n"); - sprintf(buffer + strlen(buffer), "Accelerometer bias (g):\n"); + sprintf(buffer + strlen(buffer), "Accelerometer bias (g): "); sprintf(buffer + strlen(buffer), "X: %.4f, Y: %.4f, Z: %.4f\n", mpu->accel_bias[0], mpu->accel_bias[1], mpu->accel_bias[2]); - sprintf(buffer + strlen(buffer), "Gyroscope bias (°/s):\n"); + sprintf(buffer + strlen(buffer), "Gyroscope bias (°/s): "); sprintf(buffer + strlen(buffer), "X: %.4f, Y: %.4f, Z: %.4f\n", mpu->gyro_bias[0], mpu->gyro_bias[1], mpu->gyro_bias[2]); HAL_UART_Transmit(uart, (uint8_t*)buffer, strlen(buffer), 100); @@ -269,33 +270,15 @@ void Calibrate_MPU (MPU6050_HandleTypeDef *mpu, UART_HandleTypeDef *uart){ } } - - - - -void HAL_I2C_MemRxCpltCallback(I2C_HandleTypeDef *I2C_address) { - if (I2C_address -> Instance == I2C1) { - // copy data from sensor to array - // accelerometer - raw_data[0] = (int16_t)(sensorData[0] << 8 | sensorData[1]); - raw_data[1] = (int16_t)(sensorData[2] << 8 | sensorData[3]); - raw_data[2] = (int16_t)(sensorData[4] << 8 | sensorData[5]); - // gyro - raw_data[3] = (int16_t)(sensorData[8] << 8 | sensorData[9]); - raw_data[4] = (int16_t)(sensorData[10] << 8 | sensorData[11]); - raw_data[5] = (int16_t)(sensorData[12] << 8 | sensorData[13]); - - // set the flag for the main loop - data_ready = 1; - dma_ready = 1; - - // Start next measurement - // moved to main for the time being - //HAL_I2C_Mem_Read_DMA(I2C_address, hmpu->address, MPU6050_ACC_MEAS_REG, I2C_MEMADD_SIZE_8BIT, sensorData, 14); - } +// custom function to read device status, because HAL_I2C_IsDeviceReady is apparently +// often buggy in its implementation - not using it currently +HAL_StatusTypeDef check_mpu6050_ready(MPU6050_HandleTypeDef *mpu) { + uint8_t dummy; + return HAL_I2C_Mem_Read(mpu->hi2c, mpu->address, 0x75, I2C_MEMADD_SIZE_8BIT, &dummy, 1, 100); } + // Debug functions void MPU_Diagnostics(MPU6050_HandleTypeDef *mpu, UART_HandleTypeDef *uart) { char buffer[256]; @@ -377,3 +360,21 @@ void checkRegisters(MPU6050_HandleTypeDef *mpu, UART_HandleTypeDef *uart){ sprintf(buffer, "-------------------------------\n\n\n\n"); HAL_UART_Transmit(uart, (uint8_t*)buffer, strlen(buffer), 250); } + +void I2C_Scanner(I2C_HandleTypeDef *hi2c, UART_HandleTypeDef *huart) { + char buffer[64]; + uint8_t found = 0; + + for (uint8_t addr = 0x08; addr < 0x78; addr++) { + if (HAL_I2C_IsDeviceReady(hi2c, addr << 1, 1, 10) == HAL_OK) { + sprintf(buffer, "Device found: 0x%02X\n", addr); + HAL_UART_Transmit(huart, (uint8_t*)buffer, strlen(buffer), 100); + found = 1; + } + } + + if (!found) { + sprintf(buffer, "No devices found\n"); + HAL_UART_Transmit(huart, (uint8_t*)buffer, strlen(buffer), 100); + } +} diff --git a/RTOS_Dual_Sensor_Single_Board_Testing/Core/Src/mpu6050.h b/RTOS_Dual_Sensor_Single_Board_Testing/Core/Src/mpu6050.h index 283b352..d0fca7d 100644 --- a/RTOS_Dual_Sensor_Single_Board_Testing/Core/Src/mpu6050.h +++ b/RTOS_Dual_Sensor_Single_Board_Testing/Core/Src/mpu6050.h @@ -4,6 +4,10 @@ * Created on: Nov 14, 2024 * Author: Pima */ +#include "FreeRTOS.h" +#include "task.h" +#include "madgwick.h" + // struct to hold the settings for a MPU 6050 // typedef struct so you don't have to use struct to declare it @@ -19,6 +23,30 @@ typedef struct { uint8_t calibrate; // calibration flag } MPU6050_HandleTypeDef; + +//struct to hold the processed data for each sensor +typedef struct { + float Sensor1Data[6]; + float Sensor2Data[6]; +} ProcessedData_HandleTypeDef; + +// dataframe for sending quaternions over uart +typedef struct __attribute__((packed)) { + uint8_t StartByte; + uint8_t SensorAddress; + float qw; + float qx; + float qy; + float qz; + uint8_t EndByte; +} QuaternionData; + +// enum to hold the packet dataframe data +typedef enum { + PACKET_START_BYTE = 0xDE, + PACKET_END_BYTE = 0xAD +} Packet_Bytes; + // hold the addresses of the MPU6050 registers typedef enum { MPU6050_CONF_REG = 0x1A, @@ -34,21 +62,26 @@ typedef enum { extern UART_HandleTypeDef *huart_mpu; extern MPU6050_HandleTypeDef *hmpu; +extern TaskHandle_t xSensorReadingTask; extern volatile int16_t raw_data[6]; //[ax, ay, az, gx, gy, gz] -extern volatile uint8_t data_ready; -extern volatile uint8_t dma_ready; -HAL_StatusTypeDef start_dma_transfer(MPU6050_HandleTypeDef *); + + +float* process_binaryData (MPU6050_HandleTypeDef *mpu, uint8_t binarySensorData[], float processedData[]); +void read_dma (MPU6050_HandleTypeDef *mpu, uint8_t binaryData[]); + +void sendQuat (UART_HandleTypeDef *uart, MPU6050_HandleTypeDef *mpu, MadgwickFilter *quat); + HAL_StatusTypeDef check_mpu6050_ready(MPU6050_HandleTypeDef *mpu); -void diagnose_i2c(I2C_HandleTypeDef *hi2c, UART_HandleTypeDef *uart); void Init_MPU6050 (MPU6050_HandleTypeDef*, UART_HandleTypeDef*); -void Calibrate_MPU (MPU6050_HandleTypeDef *mpu, UART_HandleTypeDef *uart); void setRange_MPU (MPU6050_HandleTypeDef *, UART_HandleTypeDef *); -void checkRegisters(MPU6050_HandleTypeDef *, UART_HandleTypeDef *); +void calibrate_Sensor(MPU6050_HandleTypeDef *mpu, UART_HandleTypeDef *uart); void MPU_Diagnostics(MPU6050_HandleTypeDef *, UART_HandleTypeDef *); +void I2C_Scanner(I2C_HandleTypeDef *hi2c, UART_HandleTypeDef *uart); +void checkRegisters(MPU6050_HandleTypeDef *, UART_HandleTypeDef *); diff --git a/RTOS_Dual_Sensor_Single_Board_Testing/Middlewares/Third_Party/FreeRTOS/Source/CMSIS_RTOS/cmsis_os.c b/RTOS_Dual_Sensor_Single_Board_Testing/Middlewares/Third_Party/FreeRTOS/Source/CMSIS_RTOS/cmsis_os.c deleted file mode 100644 index 89c3633..0000000 --- a/RTOS_Dual_Sensor_Single_Board_Testing/Middlewares/Third_Party/FreeRTOS/Source/CMSIS_RTOS/cmsis_os.c +++ /dev/null @@ -1,1727 +0,0 @@ -/* ---------------------------------------------------------------------- - * $Date: 5. February 2013 - * $Revision: V1.02 - * - * Project: CMSIS-RTOS API - * Title: cmsis_os.c - * - * Version 0.02 - * Initial Proposal Phase - * Version 0.03 - * osKernelStart added, optional feature: main started as thread - * osSemaphores have standard behavior - * osTimerCreate does not start the timer, added osTimerStart - * osThreadPass is renamed to osThreadYield - * Version 1.01 - * Support for C++ interface - * - const attribute removed from the osXxxxDef_t typedef's - * - const attribute added to the osXxxxDef macros - * Added: osTimerDelete, osMutexDelete, osSemaphoreDelete - * Added: osKernelInitialize - * Version 1.02 - * Control functions for short timeouts in microsecond resolution: - * Added: osKernelSysTick, osKernelSysTickFrequency, osKernelSysTickMicroSec - * Removed: osSignalGet - * - * - *---------------------------------------------------------------------------- - * - * Portions Copyright © 2016 STMicroelectronics International N.V. All rights reserved. - * Portions Copyright (c) 2013 ARM LIMITED - * All rights reserved. - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions are met: - * - Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * - Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in the - * documentation and/or other materials provided with the distribution. - * - Neither the name of ARM nor the names of its contributors may be used - * to endorse or promote products derived from this software without - * specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" - * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE - * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE - * ARE DISCLAIMED. IN NO EVENT SHALL COPYRIGHT HOLDERS AND CONTRIBUTORS BE - * LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR - * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF - * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS - * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN - * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) - * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE - * POSSIBILITY OF SUCH DAMAGE. - *---------------------------------------------------------------------------*/ - -#include -#include "cmsis_os.h" - -/* - * ARM Compiler 4/5 - */ -#if defined ( __CC_ARM ) - - #define __ASM __asm - #define __INLINE __inline - #define __STATIC_INLINE static __inline - - #include "cmsis_armcc.h" - -/* - * GNU Compiler - */ -#elif defined ( __GNUC__ ) - - #define __ASM __asm /*!< asm keyword for GNU Compiler */ - #define __INLINE inline /*!< inline keyword for GNU Compiler */ - #define __STATIC_INLINE static inline - - #include "cmsis_gcc.h" - - -/* - * IAR Compiler - */ -#elif defined ( __ICCARM__ ) - - #ifndef __ASM - #define __ASM __asm - #endif - #ifndef __INLINE - #define __INLINE inline - #endif - #ifndef __STATIC_INLINE - #define __STATIC_INLINE static inline - #endif - - #include -#endif - -extern void xPortSysTickHandler(void); - -/* Convert from CMSIS type osPriority to FreeRTOS priority number */ -static unsigned portBASE_TYPE makeFreeRtosPriority (osPriority priority) -{ - unsigned portBASE_TYPE fpriority = tskIDLE_PRIORITY; - - if (priority != osPriorityError) { - fpriority += (priority - osPriorityIdle); - } - - return fpriority; -} - -#if (INCLUDE_uxTaskPriorityGet == 1) -/* Convert from FreeRTOS priority number to CMSIS type osPriority */ -static osPriority makeCmsisPriority (unsigned portBASE_TYPE fpriority) -{ - osPriority priority = osPriorityError; - - if ((fpriority - tskIDLE_PRIORITY) <= (osPriorityRealtime - osPriorityIdle)) { - priority = (osPriority)((int)osPriorityIdle + (int)(fpriority - tskIDLE_PRIORITY)); - } - - return priority; -} -#endif - - -/* Determine whether we are in thread mode or handler mode. */ -static int inHandlerMode (void) -{ - return __get_IPSR() != 0; -} - -/*********************** Kernel Control Functions *****************************/ -/** -* @brief Initialize the RTOS Kernel for creating objects. -* @retval status code that indicates the execution status of the function. -* @note MUST REMAIN UNCHANGED: \b osKernelInitialize shall be consistent in every CMSIS-RTOS. -*/ -osStatus osKernelInitialize (void); - -/** -* @brief Start the RTOS Kernel with executing the specified thread. -* @param thread_def thread definition referenced with \ref osThread. -* @param argument pointer that is passed to the thread function as start argument. -* @retval status code that indicates the execution status of the function -* @note MUST REMAIN UNCHANGED: \b osKernelStart shall be consistent in every CMSIS-RTOS. -*/ -osStatus osKernelStart (void) -{ - vTaskStartScheduler(); - - return osOK; -} - -/** -* @brief Check if the RTOS kernel is already started -* @param None -* @retval (0) RTOS is not started -* (1) RTOS is started -* (-1) if this feature is disabled in FreeRTOSConfig.h -* @note MUST REMAIN UNCHANGED: \b osKernelRunning shall be consistent in every CMSIS-RTOS. -*/ -int32_t osKernelRunning(void) -{ -#if ( ( INCLUDE_xTaskGetSchedulerState == 1 ) || ( configUSE_TIMERS == 1 ) ) - if (xTaskGetSchedulerState() == taskSCHEDULER_NOT_STARTED) - return 0; - else - return 1; -#else - return (-1); -#endif -} - -#if (defined (osFeature_SysTick) && (osFeature_SysTick != 0)) // System Timer available -/** -* @brief Get the value of the Kernel SysTick timer -* @param None -* @retval None -* @note MUST REMAIN UNCHANGED: \b osKernelSysTick shall be consistent in every CMSIS-RTOS. -*/ -uint32_t osKernelSysTick(void) -{ - if (inHandlerMode()) { - return xTaskGetTickCountFromISR(); - } - else { - return xTaskGetTickCount(); - } -} -#endif // System Timer available -/*********************** Thread Management *****************************/ -/** -* @brief Create a thread and add it to Active Threads and set it to state READY. -* @param thread_def thread definition referenced with \ref osThread. -* @param argument pointer that is passed to the thread function as start argument. -* @retval thread ID for reference by other functions or NULL in case of error. -* @note MUST REMAIN UNCHANGED: \b osThreadCreate shall be consistent in every CMSIS-RTOS. -*/ -osThreadId osThreadCreate (const osThreadDef_t *thread_def, void *argument) -{ - TaskHandle_t handle; - -#if( configSUPPORT_STATIC_ALLOCATION == 1 ) && ( configSUPPORT_DYNAMIC_ALLOCATION == 1 ) - if((thread_def->buffer != NULL) && (thread_def->controlblock != NULL)) { - handle = xTaskCreateStatic((TaskFunction_t)thread_def->pthread,(const portCHAR *)thread_def->name, - thread_def->stacksize, argument, makeFreeRtosPriority(thread_def->tpriority), - thread_def->buffer, thread_def->controlblock); - } - else { - if (xTaskCreate((TaskFunction_t)thread_def->pthread,(const portCHAR *)thread_def->name, - thread_def->stacksize, argument, makeFreeRtosPriority(thread_def->tpriority), - &handle) != pdPASS) { - return NULL; - } - } -#elif( configSUPPORT_STATIC_ALLOCATION == 1 ) - - handle = xTaskCreateStatic((TaskFunction_t)thread_def->pthread,(const portCHAR *)thread_def->name, - thread_def->stacksize, argument, makeFreeRtosPriority(thread_def->tpriority), - thread_def->buffer, thread_def->controlblock); -#else - if (xTaskCreate((TaskFunction_t)thread_def->pthread,(const portCHAR *)thread_def->name, - thread_def->stacksize, argument, makeFreeRtosPriority(thread_def->tpriority), - &handle) != pdPASS) { - return NULL; - } -#endif - - return handle; -} - -/** -* @brief Return the thread ID of the current running thread. -* @retval thread ID for reference by other functions or NULL in case of error. -* @note MUST REMAIN UNCHANGED: \b osThreadGetId shall be consistent in every CMSIS-RTOS. -*/ -osThreadId osThreadGetId (void) -{ -#if ( ( INCLUDE_xTaskGetCurrentTaskHandle == 1 ) || ( configUSE_MUTEXES == 1 ) ) - return xTaskGetCurrentTaskHandle(); -#else - return NULL; -#endif -} - -/** -* @brief Terminate execution of a thread and remove it from Active Threads. -* @param thread_id thread ID obtained by \ref osThreadCreate or \ref osThreadGetId. -* @retval status code that indicates the execution status of the function. -* @note MUST REMAIN UNCHANGED: \b osThreadTerminate shall be consistent in every CMSIS-RTOS. -*/ -osStatus osThreadTerminate (osThreadId thread_id) -{ -#if (INCLUDE_vTaskDelete == 1) - vTaskDelete(thread_id); - return osOK; -#else - return osErrorOS; -#endif -} - -/** -* @brief Pass control to next thread that is in state \b READY. -* @retval status code that indicates the execution status of the function. -* @note MUST REMAIN UNCHANGED: \b osThreadYield shall be consistent in every CMSIS-RTOS. -*/ -osStatus osThreadYield (void) -{ - taskYIELD(); - - return osOK; -} - -/** -* @brief Change priority of an active thread. -* @param thread_id thread ID obtained by \ref osThreadCreate or \ref osThreadGetId. -* @param priority new priority value for the thread function. -* @retval status code that indicates the execution status of the function. -* @note MUST REMAIN UNCHANGED: \b osThreadSetPriority shall be consistent in every CMSIS-RTOS. -*/ -osStatus osThreadSetPriority (osThreadId thread_id, osPriority priority) -{ -#if (INCLUDE_vTaskPrioritySet == 1) - vTaskPrioritySet(thread_id, makeFreeRtosPriority(priority)); - return osOK; -#else - return osErrorOS; -#endif -} - -/** -* @brief Get current priority of an active thread. -* @param thread_id thread ID obtained by \ref osThreadCreate or \ref osThreadGetId. -* @retval current priority value of the thread function. -* @note MUST REMAIN UNCHANGED: \b osThreadGetPriority shall be consistent in every CMSIS-RTOS. -*/ -osPriority osThreadGetPriority (osThreadId thread_id) -{ -#if (INCLUDE_uxTaskPriorityGet == 1) - if (inHandlerMode()) - { - return makeCmsisPriority(uxTaskPriorityGetFromISR(thread_id)); - } - else - { - return makeCmsisPriority(uxTaskPriorityGet(thread_id)); - } -#else - return osPriorityError; -#endif -} - -/*********************** Generic Wait Functions *******************************/ -/** -* @brief Wait for Timeout (Time Delay) -* @param millisec time delay value -* @retval status code that indicates the execution status of the function. -*/ -osStatus osDelay (uint32_t millisec) -{ -#if INCLUDE_vTaskDelay - TickType_t ticks = millisec / portTICK_PERIOD_MS; - - vTaskDelay(ticks ? ticks : 1); /* Minimum delay = 1 tick */ - - return osOK; -#else - (void) millisec; - - return osErrorResource; -#endif -} - -#if (defined (osFeature_Wait) && (osFeature_Wait != 0)) /* Generic Wait available */ -/** -* @brief Wait for Signal, Message, Mail, or Timeout -* @param millisec timeout value or 0 in case of no time-out -* @retval event that contains signal, message, or mail information or error code. -* @note MUST REMAIN UNCHANGED: \b osWait shall be consistent in every CMSIS-RTOS. -*/ -osEvent osWait (uint32_t millisec); - -#endif /* Generic Wait available */ - -/*********************** Timer Management Functions ***************************/ -/** -* @brief Create a timer. -* @param timer_def timer object referenced with \ref osTimer. -* @param type osTimerOnce for one-shot or osTimerPeriodic for periodic behavior. -* @param argument argument to the timer call back function. -* @retval timer ID for reference by other functions or NULL in case of error. -* @note MUST REMAIN UNCHANGED: \b osTimerCreate shall be consistent in every CMSIS-RTOS. -*/ -osTimerId osTimerCreate (const osTimerDef_t *timer_def, os_timer_type type, void *argument) -{ -#if (configUSE_TIMERS == 1) - -#if( ( configSUPPORT_STATIC_ALLOCATION == 1 ) && ( configSUPPORT_DYNAMIC_ALLOCATION == 1 ) ) - if(timer_def->controlblock != NULL) { - return xTimerCreateStatic((const char *)"", - 1, // period should be filled when starting the Timer using osTimerStart - (type == osTimerPeriodic) ? pdTRUE : pdFALSE, - (void *) argument, - (TimerCallbackFunction_t)timer_def->ptimer, - (StaticTimer_t *)timer_def->controlblock); - } - else { - return xTimerCreate((const char *)"", - 1, // period should be filled when starting the Timer using osTimerStart - (type == osTimerPeriodic) ? pdTRUE : pdFALSE, - (void *) argument, - (TimerCallbackFunction_t)timer_def->ptimer); - } -#elif( configSUPPORT_STATIC_ALLOCATION == 1 ) - return xTimerCreateStatic((const char *)"", - 1, // period should be filled when starting the Timer using osTimerStart - (type == osTimerPeriodic) ? pdTRUE : pdFALSE, - (void *) argument, - (TimerCallbackFunction_t)timer_def->ptimer, - (StaticTimer_t *)timer_def->controlblock); -#else - return xTimerCreate((const char *)"", - 1, // period should be filled when starting the Timer using osTimerStart - (type == osTimerPeriodic) ? pdTRUE : pdFALSE, - (void *) argument, - (TimerCallbackFunction_t)timer_def->ptimer); -#endif - -#else - return NULL; -#endif -} - -/** -* @brief Start or restart a timer. -* @param timer_id timer ID obtained by \ref osTimerCreate. -* @param millisec time delay value of the timer. -* @retval status code that indicates the execution status of the function -* @note MUST REMAIN UNCHANGED: \b osTimerStart shall be consistent in every CMSIS-RTOS. -*/ -osStatus osTimerStart (osTimerId timer_id, uint32_t millisec) -{ - osStatus result = osOK; -#if (configUSE_TIMERS == 1) - portBASE_TYPE taskWoken = pdFALSE; - TickType_t ticks = millisec / portTICK_PERIOD_MS; - - if (ticks == 0) - ticks = 1; - - if (inHandlerMode()) - { - if (xTimerChangePeriodFromISR(timer_id, ticks, &taskWoken) != pdPASS) - { - result = osErrorOS; - } - else - { - portEND_SWITCHING_ISR(taskWoken); - } - } - else - { - if (xTimerChangePeriod(timer_id, ticks, 0) != pdPASS) - result = osErrorOS; - } - -#else - result = osErrorOS; -#endif - return result; -} - -/** -* @brief Stop a timer. -* @param timer_id timer ID obtained by \ref osTimerCreate -* @retval status code that indicates the execution status of the function. -* @note MUST REMAIN UNCHANGED: \b osTimerStop shall be consistent in every CMSIS-RTOS. -*/ -osStatus osTimerStop (osTimerId timer_id) -{ - osStatus result = osOK; -#if (configUSE_TIMERS == 1) - portBASE_TYPE taskWoken = pdFALSE; - - if (inHandlerMode()) { - if (xTimerStopFromISR(timer_id, &taskWoken) != pdPASS) { - return osErrorOS; - } - portEND_SWITCHING_ISR(taskWoken); - } - else { - if (xTimerStop(timer_id, 0) != pdPASS) { - result = osErrorOS; - } - } -#else - result = osErrorOS; -#endif - return result; -} - -/** -* @brief Delete a timer. -* @param timer_id timer ID obtained by \ref osTimerCreate -* @retval status code that indicates the execution status of the function. -* @note MUST REMAIN UNCHANGED: \b osTimerDelete shall be consistent in every CMSIS-RTOS. -*/ -osStatus osTimerDelete (osTimerId timer_id) -{ -osStatus result = osOK; - -#if (configUSE_TIMERS == 1) - - if (inHandlerMode()) { - return osErrorISR; - } - else { - if ((xTimerDelete(timer_id, osWaitForever )) != pdPASS) { - result = osErrorOS; - } - } - -#else - result = osErrorOS; -#endif - - return result; -} - -/*************************** Signal Management ********************************/ -/** -* @brief Set the specified Signal Flags of an active thread. -* @param thread_id thread ID obtained by \ref osThreadCreate or \ref osThreadGetId. -* @param signals specifies the signal flags of the thread that should be set. -* @retval previous signal flags of the specified thread or 0x80000000 in case of incorrect parameters. -* @note MUST REMAIN UNCHANGED: \b osSignalSet shall be consistent in every CMSIS-RTOS. -*/ -int32_t osSignalSet (osThreadId thread_id, int32_t signal) -{ -#if( configUSE_TASK_NOTIFICATIONS == 1 ) - BaseType_t xHigherPriorityTaskWoken = pdFALSE; - uint32_t ulPreviousNotificationValue = 0; - - if (inHandlerMode()) - { - if(xTaskGenericNotifyFromISR( thread_id , (uint32_t)signal, eSetBits, &ulPreviousNotificationValue, &xHigherPriorityTaskWoken ) != pdPASS ) - return 0x80000000; - - portYIELD_FROM_ISR( xHigherPriorityTaskWoken ); - } - else if(xTaskGenericNotify( thread_id , (uint32_t)signal, eSetBits, &ulPreviousNotificationValue) != pdPASS ) - return 0x80000000; - - return ulPreviousNotificationValue; -#else - (void) thread_id; - (void) signal; - - return 0x80000000; /* Task Notification not supported */ -#endif -} - -/** -* @brief Clear the specified Signal Flags of an active thread. -* @param thread_id thread ID obtained by \ref osThreadCreate or \ref osThreadGetId. -* @param signals specifies the signal flags of the thread that shall be cleared. -* @retval previous signal flags of the specified thread or 0x80000000 in case of incorrect parameters. -* @note MUST REMAIN UNCHANGED: \b osSignalClear shall be consistent in every CMSIS-RTOS. -*/ -int32_t osSignalClear (osThreadId thread_id, int32_t signal); - -/** -* @brief Wait for one or more Signal Flags to become signaled for the current \b RUNNING thread. -* @param signals wait until all specified signal flags set or 0 for any single signal flag. -* @param millisec timeout value or 0 in case of no time-out. -* @retval event flag information or error code. -* @note MUST REMAIN UNCHANGED: \b osSignalWait shall be consistent in every CMSIS-RTOS. -*/ -osEvent osSignalWait (int32_t signals, uint32_t millisec) -{ - osEvent ret; - -#if( configUSE_TASK_NOTIFICATIONS == 1 ) - - TickType_t ticks; - - ret.value.signals = 0; - ticks = 0; - if (millisec == osWaitForever) { - ticks = portMAX_DELAY; - } - else if (millisec != 0) { - ticks = millisec / portTICK_PERIOD_MS; - if (ticks == 0) { - ticks = 1; - } - } - - if (inHandlerMode()) - { - ret.status = osErrorISR; /*Not allowed in ISR*/ - } - else - { - if(xTaskNotifyWait( 0,(uint32_t) signals, (uint32_t *)&ret.value.signals, ticks) != pdTRUE) - { - if(ticks == 0) ret.status = osOK; - else ret.status = osEventTimeout; - } - else if(ret.value.signals < 0) - { - ret.status = osErrorValue; - } - else ret.status = osEventSignal; - } -#else - (void) signals; - (void) millisec; - - ret.status = osErrorOS; /* Task Notification not supported */ -#endif - - return ret; -} - -/**************************** Mutex Management ********************************/ -/** -* @brief Create and Initialize a Mutex object -* @param mutex_def mutex definition referenced with \ref osMutex. -* @retval mutex ID for reference by other functions or NULL in case of error. -* @note MUST REMAIN UNCHANGED: \b osMutexCreate shall be consistent in every CMSIS-RTOS. -*/ -osMutexId osMutexCreate (const osMutexDef_t *mutex_def) -{ -#if ( configUSE_MUTEXES == 1) - -#if( configSUPPORT_STATIC_ALLOCATION == 1 ) && ( configSUPPORT_DYNAMIC_ALLOCATION == 1 ) - - if (mutex_def->controlblock != NULL) { - return xSemaphoreCreateMutexStatic( mutex_def->controlblock ); - } - else { - return xSemaphoreCreateMutex(); - } -#elif ( configSUPPORT_STATIC_ALLOCATION == 1 ) - return xSemaphoreCreateMutexStatic( mutex_def->controlblock ); -#else - return xSemaphoreCreateMutex(); -#endif -#else - return NULL; -#endif -} - -/** -* @brief Wait until a Mutex becomes available -* @param mutex_id mutex ID obtained by \ref osMutexCreate. -* @param millisec timeout value or 0 in case of no time-out. -* @retval status code that indicates the execution status of the function. -* @note MUST REMAIN UNCHANGED: \b osMutexWait shall be consistent in every CMSIS-RTOS. -*/ -osStatus osMutexWait (osMutexId mutex_id, uint32_t millisec) -{ - TickType_t ticks; - portBASE_TYPE taskWoken = pdFALSE; - - - if (mutex_id == NULL) { - return osErrorParameter; - } - - ticks = 0; - if (millisec == osWaitForever) { - ticks = portMAX_DELAY; - } - else if (millisec != 0) { - ticks = millisec / portTICK_PERIOD_MS; - if (ticks == 0) { - ticks = 1; - } - } - - if (inHandlerMode()) { - if (xSemaphoreTakeFromISR(mutex_id, &taskWoken) != pdTRUE) { - return osErrorOS; - } - portEND_SWITCHING_ISR(taskWoken); - } - else if (xSemaphoreTake(mutex_id, ticks) != pdTRUE) { - return osErrorOS; - } - - return osOK; -} - -/** -* @brief Release a Mutex that was obtained by \ref osMutexWait -* @param mutex_id mutex ID obtained by \ref osMutexCreate. -* @retval status code that indicates the execution status of the function. -* @note MUST REMAIN UNCHANGED: \b osMutexRelease shall be consistent in every CMSIS-RTOS. -*/ -osStatus osMutexRelease (osMutexId mutex_id) -{ - osStatus result = osOK; - portBASE_TYPE taskWoken = pdFALSE; - - if (inHandlerMode()) { - if (xSemaphoreGiveFromISR(mutex_id, &taskWoken) != pdTRUE) { - return osErrorOS; - } - portEND_SWITCHING_ISR(taskWoken); - } - else if (xSemaphoreGive(mutex_id) != pdTRUE) - { - result = osErrorOS; - } - return result; -} - -/** -* @brief Delete a Mutex -* @param mutex_id mutex ID obtained by \ref osMutexCreate. -* @retval status code that indicates the execution status of the function. -* @note MUST REMAIN UNCHANGED: \b osMutexDelete shall be consistent in every CMSIS-RTOS. -*/ -osStatus osMutexDelete (osMutexId mutex_id) -{ - if (inHandlerMode()) { - return osErrorISR; - } - - vQueueDelete(mutex_id); - - return osOK; -} - -/******************** Semaphore Management Functions **************************/ - -#if (defined (osFeature_Semaphore) && (osFeature_Semaphore != 0)) - -/** -* @brief Create and Initialize a Semaphore object used for managing resources -* @param semaphore_def semaphore definition referenced with \ref osSemaphore. -* @param count number of available resources. -* @retval semaphore ID for reference by other functions or NULL in case of error. -* @note MUST REMAIN UNCHANGED: \b osSemaphoreCreate shall be consistent in every CMSIS-RTOS. -*/ -osSemaphoreId osSemaphoreCreate (const osSemaphoreDef_t *semaphore_def, int32_t count) -{ -#if( configSUPPORT_STATIC_ALLOCATION == 1 ) && ( configSUPPORT_DYNAMIC_ALLOCATION == 1 ) - - osSemaphoreId sema; - - if (semaphore_def->controlblock != NULL){ - if (count == 1) { - return xSemaphoreCreateBinaryStatic( semaphore_def->controlblock ); - } - else { -#if (configUSE_COUNTING_SEMAPHORES == 1 ) - return xSemaphoreCreateCountingStatic( count, count, semaphore_def->controlblock ); -#else - return NULL; -#endif - } - } - else { - if (count == 1) { - vSemaphoreCreateBinary(sema); - return sema; - } - else { -#if (configUSE_COUNTING_SEMAPHORES == 1 ) - return xSemaphoreCreateCounting(count, count); -#else - return NULL; -#endif - } - } -#elif ( configSUPPORT_STATIC_ALLOCATION == 1 ) // configSUPPORT_DYNAMIC_ALLOCATION == 0 - if(count == 1) { - return xSemaphoreCreateBinaryStatic( semaphore_def->controlblock ); - } - else - { -#if (configUSE_COUNTING_SEMAPHORES == 1 ) - return xSemaphoreCreateCountingStatic( count, count, semaphore_def->controlblock ); -#else - return NULL; -#endif - } -#else // configSUPPORT_STATIC_ALLOCATION == 0 && configSUPPORT_DYNAMIC_ALLOCATION == 1 - osSemaphoreId sema; - - if (count == 1) { - vSemaphoreCreateBinary(sema); - return sema; - } - else { -#if (configUSE_COUNTING_SEMAPHORES == 1 ) - return xSemaphoreCreateCounting(count, count); -#else - return NULL; -#endif - } -#endif -} - -/** -* @brief Wait until a Semaphore token becomes available -* @param semaphore_id semaphore object referenced with \ref osSemaphore. -* @param millisec timeout value or 0 in case of no time-out. -* @retval number of available tokens, or -1 in case of incorrect parameters. -* @note MUST REMAIN UNCHANGED: \b osSemaphoreWait shall be consistent in every CMSIS-RTOS. -*/ -int32_t osSemaphoreWait (osSemaphoreId semaphore_id, uint32_t millisec) -{ - TickType_t ticks; - portBASE_TYPE taskWoken = pdFALSE; - - - if (semaphore_id == NULL) { - return osErrorParameter; - } - - ticks = 0; - if (millisec == osWaitForever) { - ticks = portMAX_DELAY; - } - else if (millisec != 0) { - ticks = millisec / portTICK_PERIOD_MS; - if (ticks == 0) { - ticks = 1; - } - } - - if (inHandlerMode()) { - if (xSemaphoreTakeFromISR(semaphore_id, &taskWoken) != pdTRUE) { - return osErrorOS; - } - portEND_SWITCHING_ISR(taskWoken); - } - else if (xSemaphoreTake(semaphore_id, ticks) != pdTRUE) { - return osErrorOS; - } - - return osOK; -} - -/** -* @brief Release a Semaphore token -* @param semaphore_id semaphore object referenced with \ref osSemaphore. -* @retval status code that indicates the execution status of the function. -* @note MUST REMAIN UNCHANGED: \b osSemaphoreRelease shall be consistent in every CMSIS-RTOS. -*/ -osStatus osSemaphoreRelease (osSemaphoreId semaphore_id) -{ - osStatus result = osOK; - portBASE_TYPE taskWoken = pdFALSE; - - - if (inHandlerMode()) { - if (xSemaphoreGiveFromISR(semaphore_id, &taskWoken) != pdTRUE) { - return osErrorOS; - } - portEND_SWITCHING_ISR(taskWoken); - } - else { - if (xSemaphoreGive(semaphore_id) != pdTRUE) { - result = osErrorOS; - } - } - - return result; -} - -/** -* @brief Delete a Semaphore -* @param semaphore_id semaphore object referenced with \ref osSemaphore. -* @retval status code that indicates the execution status of the function. -* @note MUST REMAIN UNCHANGED: \b osSemaphoreDelete shall be consistent in every CMSIS-RTOS. -*/ -osStatus osSemaphoreDelete (osSemaphoreId semaphore_id) -{ - if (inHandlerMode()) { - return osErrorISR; - } - - vSemaphoreDelete(semaphore_id); - - return osOK; -} - -#endif /* Use Semaphores */ - -/******************* Memory Pool Management Functions ***********************/ - -#if (defined (osFeature_Pool) && (osFeature_Pool != 0)) - -//TODO -//This is a primitive and inefficient wrapper around the existing FreeRTOS memory management. -//A better implementation will have to modify heap_x.c! - - -typedef struct os_pool_cb { - void *pool; - uint8_t *markers; - uint32_t pool_sz; - uint32_t item_sz; - uint32_t currentIndex; -} os_pool_cb_t; - - -/** -* @brief Create and Initialize a memory pool -* @param pool_def memory pool definition referenced with \ref osPool. -* @retval memory pool ID for reference by other functions or NULL in case of error. -* @note MUST REMAIN UNCHANGED: \b osPoolCreate shall be consistent in every CMSIS-RTOS. -*/ -osPoolId osPoolCreate (const osPoolDef_t *pool_def) -{ -#if (configSUPPORT_DYNAMIC_ALLOCATION == 1) - osPoolId thePool; - int itemSize = 4 * ((pool_def->item_sz + 3) / 4); - uint32_t i; - - /* First have to allocate memory for the pool control block. */ - thePool = pvPortMalloc(sizeof(os_pool_cb_t)); - - - if (thePool) { - thePool->pool_sz = pool_def->pool_sz; - thePool->item_sz = itemSize; - thePool->currentIndex = 0; - - /* Memory for markers */ - thePool->markers = pvPortMalloc(pool_def->pool_sz); - - if (thePool->markers) { - /* Now allocate the pool itself. */ - thePool->pool = pvPortMalloc(pool_def->pool_sz * itemSize); - - if (thePool->pool) { - for (i = 0; i < pool_def->pool_sz; i++) { - thePool->markers[i] = 0; - } - } - else { - vPortFree(thePool->markers); - vPortFree(thePool); - thePool = NULL; - } - } - else { - vPortFree(thePool); - thePool = NULL; - } - } - - return thePool; - -#else - return NULL; -#endif -} - -/** -* @brief Allocate a memory block from a memory pool -* @param pool_id memory pool ID obtain referenced with \ref osPoolCreate. -* @retval address of the allocated memory block or NULL in case of no memory available. -* @note MUST REMAIN UNCHANGED: \b osPoolAlloc shall be consistent in every CMSIS-RTOS. -*/ -void *osPoolAlloc (osPoolId pool_id) -{ - int dummy = 0; - void *p = NULL; - uint32_t i; - uint32_t index; - - if (inHandlerMode()) { - dummy = portSET_INTERRUPT_MASK_FROM_ISR(); - } - else { - vPortEnterCritical(); - } - - for (i = 0; i < pool_id->pool_sz; i++) { - index = (pool_id->currentIndex + i) % pool_id->pool_sz; - - if (pool_id->markers[index] == 0) { - pool_id->markers[index] = 1; - p = (void *)((uint32_t)(pool_id->pool) + (index * pool_id->item_sz)); - pool_id->currentIndex = index; - break; - } - } - - if (inHandlerMode()) { - portCLEAR_INTERRUPT_MASK_FROM_ISR(dummy); - } - else { - vPortExitCritical(); - } - - return p; -} - -/** -* @brief Allocate a memory block from a memory pool and set memory block to zero -* @param pool_id memory pool ID obtain referenced with \ref osPoolCreate. -* @retval address of the allocated memory block or NULL in case of no memory available. -* @note MUST REMAIN UNCHANGED: \b osPoolCAlloc shall be consistent in every CMSIS-RTOS. -*/ -void *osPoolCAlloc (osPoolId pool_id) -{ - void *p = osPoolAlloc(pool_id); - - if (p != NULL) - { - memset(p, 0, sizeof(pool_id->pool_sz)); - } - - return p; -} - -/** -* @brief Return an allocated memory block back to a specific memory pool -* @param pool_id memory pool ID obtain referenced with \ref osPoolCreate. -* @param block address of the allocated memory block that is returned to the memory pool. -* @retval status code that indicates the execution status of the function. -* @note MUST REMAIN UNCHANGED: \b osPoolFree shall be consistent in every CMSIS-RTOS. -*/ -osStatus osPoolFree (osPoolId pool_id, void *block) -{ - uint32_t index; - - if (pool_id == NULL) { - return osErrorParameter; - } - - if (block == NULL) { - return osErrorParameter; - } - - if (block < pool_id->pool) { - return osErrorParameter; - } - - index = (uint32_t)block - (uint32_t)(pool_id->pool); - if (index % pool_id->item_sz) { - return osErrorParameter; - } - index = index / pool_id->item_sz; - if (index >= pool_id->pool_sz) { - return osErrorParameter; - } - - pool_id->markers[index] = 0; - - return osOK; -} - - -#endif /* Use Memory Pool Management */ - -/******************* Message Queue Management Functions *********************/ - -#if (defined (osFeature_MessageQ) && (osFeature_MessageQ != 0)) /* Use Message Queues */ - -/** -* @brief Create and Initialize a Message Queue -* @param queue_def queue definition referenced with \ref osMessageQ. -* @param thread_id thread ID (obtained by \ref osThreadCreate or \ref osThreadGetId) or NULL. -* @retval message queue ID for reference by other functions or NULL in case of error. -* @note MUST REMAIN UNCHANGED: \b osMessageCreate shall be consistent in every CMSIS-RTOS. -*/ -osMessageQId osMessageCreate (const osMessageQDef_t *queue_def, osThreadId thread_id) -{ - (void) thread_id; - -#if( configSUPPORT_STATIC_ALLOCATION == 1 ) && ( configSUPPORT_DYNAMIC_ALLOCATION == 1 ) - - if ((queue_def->buffer != NULL) && (queue_def->controlblock != NULL)) { - return xQueueCreateStatic(queue_def->queue_sz, queue_def->item_sz, queue_def->buffer, queue_def->controlblock); - } - else { - return xQueueCreate(queue_def->queue_sz, queue_def->item_sz); - } -#elif ( configSUPPORT_STATIC_ALLOCATION == 1 ) - return xQueueCreateStatic(queue_def->queue_sz, queue_def->item_sz, queue_def->buffer, queue_def->controlblock); -#else - return xQueueCreate(queue_def->queue_sz, queue_def->item_sz); -#endif -} - -/** -* @brief Put a Message to a Queue. -* @param queue_id message queue ID obtained with \ref osMessageCreate. -* @param info message information. -* @param millisec timeout value or 0 in case of no time-out. -* @retval status code that indicates the execution status of the function. -* @note MUST REMAIN UNCHANGED: \b osMessagePut shall be consistent in every CMSIS-RTOS. -*/ -osStatus osMessagePut (osMessageQId queue_id, uint32_t info, uint32_t millisec) -{ - portBASE_TYPE taskWoken = pdFALSE; - TickType_t ticks; - - ticks = millisec / portTICK_PERIOD_MS; - if (ticks == 0) { - ticks = 1; - } - - if (inHandlerMode()) { - if (xQueueSendFromISR(queue_id, &info, &taskWoken) != pdTRUE) { - return osErrorOS; - } - portEND_SWITCHING_ISR(taskWoken); - } - else { - if (xQueueSend(queue_id, &info, ticks) != pdTRUE) { - return osErrorOS; - } - } - - return osOK; -} - -/** -* @brief Get a Message or Wait for a Message from a Queue. -* @param queue_id message queue ID obtained with \ref osMessageCreate. -* @param millisec timeout value or 0 in case of no time-out. -* @retval event information that includes status code. -* @note MUST REMAIN UNCHANGED: \b osMessageGet shall be consistent in every CMSIS-RTOS. -*/ -osEvent osMessageGet (osMessageQId queue_id, uint32_t millisec) -{ - portBASE_TYPE taskWoken; - TickType_t ticks; - osEvent event; - - event.def.message_id = queue_id; - event.value.v = 0; - - if (queue_id == NULL) { - event.status = osErrorParameter; - return event; - } - - taskWoken = pdFALSE; - - ticks = 0; - if (millisec == osWaitForever) { - ticks = portMAX_DELAY; - } - else if (millisec != 0) { - ticks = millisec / portTICK_PERIOD_MS; - if (ticks == 0) { - ticks = 1; - } - } - - if (inHandlerMode()) { - if (xQueueReceiveFromISR(queue_id, &event.value.v, &taskWoken) == pdTRUE) { - /* We have mail */ - event.status = osEventMessage; - } - else { - event.status = osOK; - } - portEND_SWITCHING_ISR(taskWoken); - } - else { - if (xQueueReceive(queue_id, &event.value.v, ticks) == pdTRUE) { - /* We have mail */ - event.status = osEventMessage; - } - else { - event.status = (ticks == 0) ? osOK : osEventTimeout; - } - } - - return event; -} - -#endif /* Use Message Queues */ - -/******************** Mail Queue Management Functions ***********************/ -#if (defined (osFeature_MailQ) && (osFeature_MailQ != 0)) /* Use Mail Queues */ - - -typedef struct os_mailQ_cb { - const osMailQDef_t *queue_def; - QueueHandle_t handle; - osPoolId pool; -} os_mailQ_cb_t; - -/** -* @brief Create and Initialize mail queue -* @param queue_def reference to the mail queue definition obtain with \ref osMailQ -* @param thread_id thread ID (obtained by \ref osThreadCreate or \ref osThreadGetId) or NULL. -* @retval mail queue ID for reference by other functions or NULL in case of error. -* @note MUST REMAIN UNCHANGED: \b osMailCreate shall be consistent in every CMSIS-RTOS. -*/ -osMailQId osMailCreate (const osMailQDef_t *queue_def, osThreadId thread_id) -{ -#if (configSUPPORT_DYNAMIC_ALLOCATION == 1) - (void) thread_id; - - osPoolDef_t pool_def = {queue_def->queue_sz, queue_def->item_sz, NULL}; - - /* Create a mail queue control block */ - - *(queue_def->cb) = pvPortMalloc(sizeof(struct os_mailQ_cb)); - - if (*(queue_def->cb) == NULL) { - return NULL; - } - (*(queue_def->cb))->queue_def = queue_def; - - /* Create a queue in FreeRTOS */ - (*(queue_def->cb))->handle = xQueueCreate(queue_def->queue_sz, sizeof(void *)); - - - if ((*(queue_def->cb))->handle == NULL) { - vPortFree(*(queue_def->cb)); - return NULL; - } - - /* Create a mail pool */ - (*(queue_def->cb))->pool = osPoolCreate(&pool_def); - if ((*(queue_def->cb))->pool == NULL) { - //TODO: Delete queue. How to do it in FreeRTOS? - vPortFree(*(queue_def->cb)); - return NULL; - } - - return *(queue_def->cb); -#else - return NULL; -#endif -} - -/** -* @brief Allocate a memory block from a mail -* @param queue_id mail queue ID obtained with \ref osMailCreate. -* @param millisec timeout value or 0 in case of no time-out. -* @retval pointer to memory block that can be filled with mail or NULL in case error. -* @note MUST REMAIN UNCHANGED: \b osMailAlloc shall be consistent in every CMSIS-RTOS. -*/ -void *osMailAlloc (osMailQId queue_id, uint32_t millisec) -{ - (void) millisec; - void *p; - - - if (queue_id == NULL) { - return NULL; - } - - p = osPoolAlloc(queue_id->pool); - - return p; -} - -/** -* @brief Allocate a memory block from a mail and set memory block to zero -* @param queue_id mail queue ID obtained with \ref osMailCreate. -* @param millisec timeout value or 0 in case of no time-out. -* @retval pointer to memory block that can be filled with mail or NULL in case error. -* @note MUST REMAIN UNCHANGED: \b osMailCAlloc shall be consistent in every CMSIS-RTOS. -*/ -void *osMailCAlloc (osMailQId queue_id, uint32_t millisec) -{ - uint32_t i; - void *p = osMailAlloc(queue_id, millisec); - - if (p) { - for (i = 0; i < queue_id->queue_def->item_sz; i++) { - ((uint8_t *)p)[i] = 0; - } - } - - return p; -} - -/** -* @brief Put a mail to a queue -* @param queue_id mail queue ID obtained with \ref osMailCreate. -* @param mail memory block previously allocated with \ref osMailAlloc or \ref osMailCAlloc. -* @retval status code that indicates the execution status of the function. -* @note MUST REMAIN UNCHANGED: \b osMailPut shall be consistent in every CMSIS-RTOS. -*/ -osStatus osMailPut (osMailQId queue_id, void *mail) -{ - portBASE_TYPE taskWoken; - - - if (queue_id == NULL) { - return osErrorParameter; - } - - taskWoken = pdFALSE; - - if (inHandlerMode()) { - if (xQueueSendFromISR(queue_id->handle, &mail, &taskWoken) != pdTRUE) { - return osErrorOS; - } - portEND_SWITCHING_ISR(taskWoken); - } - else { - if (xQueueSend(queue_id->handle, &mail, 0) != pdTRUE) { - return osErrorOS; - } - } - - return osOK; -} - -/** -* @brief Get a mail from a queue -* @param queue_id mail queue ID obtained with \ref osMailCreate. -* @param millisec timeout value or 0 in case of no time-out -* @retval event that contains mail information or error code. -* @note MUST REMAIN UNCHANGED: \b osMailGet shall be consistent in every CMSIS-RTOS. -*/ -osEvent osMailGet (osMailQId queue_id, uint32_t millisec) -{ - portBASE_TYPE taskWoken; - TickType_t ticks; - osEvent event; - - event.def.mail_id = queue_id; - - if (queue_id == NULL) { - event.status = osErrorParameter; - return event; - } - - taskWoken = pdFALSE; - - ticks = 0; - if (millisec == osWaitForever) { - ticks = portMAX_DELAY; - } - else if (millisec != 0) { - ticks = millisec / portTICK_PERIOD_MS; - if (ticks == 0) { - ticks = 1; - } - } - - if (inHandlerMode()) { - if (xQueueReceiveFromISR(queue_id->handle, &event.value.p, &taskWoken) == pdTRUE) { - /* We have mail */ - event.status = osEventMail; - } - else { - event.status = osOK; - } - portEND_SWITCHING_ISR(taskWoken); - } - else { - if (xQueueReceive(queue_id->handle, &event.value.p, ticks) == pdTRUE) { - /* We have mail */ - event.status = osEventMail; - } - else { - event.status = (ticks == 0) ? osOK : osEventTimeout; - } - } - - return event; -} - -/** -* @brief Free a memory block from a mail -* @param queue_id mail queue ID obtained with \ref osMailCreate. -* @param mail pointer to the memory block that was obtained with \ref osMailGet. -* @retval status code that indicates the execution status of the function. -* @note MUST REMAIN UNCHANGED: \b osMailFree shall be consistent in every CMSIS-RTOS. -*/ -osStatus osMailFree (osMailQId queue_id, void *mail) -{ - if (queue_id == NULL) { - return osErrorParameter; - } - - return osPoolFree(queue_id->pool, mail); -} -#endif /* Use Mail Queues */ - -/*************************** Additional specific APIs to Free RTOS ************/ -/** -* @brief Handles the tick increment -* @param none. -* @retval none. -*/ -void osSystickHandler(void) -{ - -#if (INCLUDE_xTaskGetSchedulerState == 1 ) - if (xTaskGetSchedulerState() != taskSCHEDULER_NOT_STARTED) - { -#endif /* INCLUDE_xTaskGetSchedulerState */ - xPortSysTickHandler(); -#if (INCLUDE_xTaskGetSchedulerState == 1 ) - } -#endif /* INCLUDE_xTaskGetSchedulerState */ -} - -#if ( INCLUDE_eTaskGetState == 1 ) -/** -* @brief Obtain the state of any thread. -* @param thread_id thread ID obtained by \ref osThreadCreate or \ref osThreadGetId. -* @retval the stae of the thread, states are encoded by the osThreadState enumerated type. -*/ -osThreadState osThreadGetState(osThreadId thread_id) -{ - eTaskState ThreadState; - osThreadState result; - - ThreadState = eTaskGetState(thread_id); - - switch (ThreadState) - { - case eRunning : - result = osThreadRunning; - break; - case eReady : - result = osThreadReady; - break; - case eBlocked : - result = osThreadBlocked; - break; - case eSuspended : - result = osThreadSuspended; - break; - case eDeleted : - result = osThreadDeleted; - break; - default: - result = osThreadError; - } - - return result; -} -#endif /* INCLUDE_eTaskGetState */ - -#if (INCLUDE_eTaskGetState == 1) -/** -* @brief Check if a thread is already suspended or not. -* @param thread_id thread ID obtained by \ref osThreadCreate or \ref osThreadGetId. -* @retval status code that indicates the execution status of the function. -*/ -osStatus osThreadIsSuspended(osThreadId thread_id) -{ - if (eTaskGetState(thread_id) == eSuspended) - return osOK; - else - return osErrorOS; -} -#endif /* INCLUDE_eTaskGetState */ -/** -* @brief Suspend execution of a thread. -* @param thread_id thread ID obtained by \ref osThreadCreate or \ref osThreadGetId. -* @retval status code that indicates the execution status of the function. -*/ -osStatus osThreadSuspend (osThreadId thread_id) -{ -#if (INCLUDE_vTaskSuspend == 1) - vTaskSuspend(thread_id); - - return osOK; -#else - return osErrorResource; -#endif -} - -/** -* @brief Resume execution of a suspended thread. -* @param thread_id thread ID obtained by \ref osThreadCreate or \ref osThreadGetId. -* @retval status code that indicates the execution status of the function. -*/ -osStatus osThreadResume (osThreadId thread_id) -{ -#if (INCLUDE_vTaskSuspend == 1) - if(inHandlerMode()) - { - if (xTaskResumeFromISR(thread_id) == pdTRUE) - { - portYIELD_FROM_ISR(pdTRUE); - } - } - else - { - vTaskResume(thread_id); - } - return osOK; -#else - return osErrorResource; -#endif -} - -/** -* @brief Suspend execution of a all active threads. -* @retval status code that indicates the execution status of the function. -*/ -osStatus osThreadSuspendAll (void) -{ - vTaskSuspendAll(); - - return osOK; -} - -/** -* @brief Resume execution of a all suspended threads. -* @retval status code that indicates the execution status of the function. -*/ -osStatus osThreadResumeAll (void) -{ - if (xTaskResumeAll() == pdTRUE) - return osOK; - else - return osErrorOS; - -} - -/** -* @brief Delay a task until a specified time -* @param PreviousWakeTime Pointer to a variable that holds the time at which the -* task was last unblocked. PreviousWakeTime must be initialised with the current time -* prior to its first use (PreviousWakeTime = osKernelSysTick() ) -* @param millisec time delay value -* @retval status code that indicates the execution status of the function. -*/ -osStatus osDelayUntil (uint32_t *PreviousWakeTime, uint32_t millisec) -{ -#if INCLUDE_vTaskDelayUntil - TickType_t ticks = (millisec / portTICK_PERIOD_MS); - vTaskDelayUntil((TickType_t *) PreviousWakeTime, ticks ? ticks : 1); - - return osOK; -#else - (void) millisec; - (void) PreviousWakeTime; - - return osErrorResource; -#endif -} - -/** -* @brief Abort the delay for a specific thread -* @param thread_id thread ID obtained by \ref osThreadCreate or \ref osThreadGetId -* @retval status code that indicates the execution status of the function. -*/ -osStatus osAbortDelay(osThreadId thread_id) -{ -#if INCLUDE_xTaskAbortDelay - - xTaskAbortDelay(thread_id); - - return osOK; -#else - (void) thread_id; - - return osErrorResource; -#endif -} - -/** -* @brief Lists all the current threads, along with their current state -* and stack usage high water mark. -* @param buffer A buffer into which the above mentioned details -* will be written -* @retval status code that indicates the execution status of the function. -*/ -osStatus osThreadList (uint8_t *buffer) -{ -#if ( ( configUSE_TRACE_FACILITY == 1 ) && ( configUSE_STATS_FORMATTING_FUNCTIONS == 1 ) ) - vTaskList((char *)buffer); -#endif - return osOK; -} - -/** -* @brief Receive an item from a queue without removing the item from the queue. -* @param queue_id message queue ID obtained with \ref osMessageCreate. -* @param millisec timeout value or 0 in case of no time-out. -* @retval event information that includes status code. -*/ -osEvent osMessagePeek (osMessageQId queue_id, uint32_t millisec) -{ - TickType_t ticks; - osEvent event; - - event.def.message_id = queue_id; - - if (queue_id == NULL) { - event.status = osErrorParameter; - return event; - } - - ticks = 0; - if (millisec == osWaitForever) { - ticks = portMAX_DELAY; - } - else if (millisec != 0) { - ticks = millisec / portTICK_PERIOD_MS; - if (ticks == 0) { - ticks = 1; - } - } - - if (xQueuePeek(queue_id, &event.value.v, ticks) == pdTRUE) - { - /* We have mail */ - event.status = osEventMessage; - } - else - { - event.status = (ticks == 0) ? osOK : osEventTimeout; - } - - return event; -} - -/** -* @brief Get the number of messaged stored in a queue. -* @param queue_id message queue ID obtained with \ref osMessageCreate. -* @retval number of messages stored in a queue. -*/ -uint32_t osMessageWaiting(osMessageQId queue_id) -{ - if (inHandlerMode()) { - return uxQueueMessagesWaitingFromISR(queue_id); - } - else - { - return uxQueueMessagesWaiting(queue_id); - } -} - -/** -* @brief Get the available space in a message queue. -* @param queue_id message queue ID obtained with \ref osMessageCreate. -* @retval available space in a message queue. -*/ -uint32_t osMessageAvailableSpace(osMessageQId queue_id) -{ - return uxQueueSpacesAvailable(queue_id); -} - -/** -* @brief Delete a Message Queue -* @param queue_id message queue ID obtained with \ref osMessageCreate. -* @retval status code that indicates the execution status of the function. -*/ -osStatus osMessageDelete (osMessageQId queue_id) -{ - if (inHandlerMode()) { - return osErrorISR; - } - - vQueueDelete(queue_id); - - return osOK; -} - -/** -* @brief Create and Initialize a Recursive Mutex -* @param mutex_def mutex definition referenced with \ref osMutex. -* @retval mutex ID for reference by other functions or NULL in case of error.. -*/ -osMutexId osRecursiveMutexCreate (const osMutexDef_t *mutex_def) -{ -#if (configUSE_RECURSIVE_MUTEXES == 1) -#if( configSUPPORT_STATIC_ALLOCATION == 1 ) && ( configSUPPORT_DYNAMIC_ALLOCATION == 1 ) - - if (mutex_def->controlblock != NULL){ - return xSemaphoreCreateRecursiveMutexStatic( mutex_def->controlblock ); - } - else { - return xSemaphoreCreateRecursiveMutex(); - } -#elif ( configSUPPORT_STATIC_ALLOCATION == 1 ) - return xSemaphoreCreateRecursiveMutexStatic( mutex_def->controlblock ); -#else - return xSemaphoreCreateRecursiveMutex(); -#endif -#else - return NULL; -#endif -} - -/** -* @brief Release a Recursive Mutex -* @param mutex_id mutex ID obtained by \ref osRecursiveMutexCreate. -* @retval status code that indicates the execution status of the function. -*/ -osStatus osRecursiveMutexRelease (osMutexId mutex_id) -{ -#if (configUSE_RECURSIVE_MUTEXES == 1) - osStatus result = osOK; - - if (xSemaphoreGiveRecursive(mutex_id) != pdTRUE) - { - result = osErrorOS; - } - return result; -#else - return osErrorResource; -#endif -} - -/** -* @brief Release a Recursive Mutex -* @param mutex_id mutex ID obtained by \ref osRecursiveMutexCreate. -* @param millisec timeout value or 0 in case of no time-out. -* @retval status code that indicates the execution status of the function. -*/ -osStatus osRecursiveMutexWait (osMutexId mutex_id, uint32_t millisec) -{ -#if (configUSE_RECURSIVE_MUTEXES == 1) - TickType_t ticks; - - if (mutex_id == NULL) - { - return osErrorParameter; - } - - ticks = 0; - if (millisec == osWaitForever) - { - ticks = portMAX_DELAY; - } - else if (millisec != 0) - { - ticks = millisec / portTICK_PERIOD_MS; - if (ticks == 0) - { - ticks = 1; - } - } - - if (xSemaphoreTakeRecursive(mutex_id, ticks) != pdTRUE) - { - return osErrorOS; - } - return osOK; -#else - return osErrorResource; -#endif -} - -/** -* @brief Returns the current count value of a counting semaphore -* @param semaphore_id semaphore_id ID obtained by \ref osSemaphoreCreate. -* @retval count value -*/ -uint32_t osSemaphoreGetCount(osSemaphoreId semaphore_id) -{ - return uxSemaphoreGetCount(semaphore_id); -} diff --git a/RTOS_Dual_Sensor_Single_Board_Testing/Middlewares/Third_Party/FreeRTOS/Source/CMSIS_RTOS/cmsis_os.h b/RTOS_Dual_Sensor_Single_Board_Testing/Middlewares/Third_Party/FreeRTOS/Source/CMSIS_RTOS/cmsis_os.h deleted file mode 100644 index f53a132..0000000 --- a/RTOS_Dual_Sensor_Single_Board_Testing/Middlewares/Third_Party/FreeRTOS/Source/CMSIS_RTOS/cmsis_os.h +++ /dev/null @@ -1,1026 +0,0 @@ -/* ---------------------------------------------------------------------- - * $Date: 5. February 2013 - * $Revision: V1.02 - * - * Project: CMSIS-RTOS API - * Title: cmsis_os.h header file - * - * Version 0.02 - * Initial Proposal Phase - * Version 0.03 - * osKernelStart added, optional feature: main started as thread - * osSemaphores have standard behavior - * osTimerCreate does not start the timer, added osTimerStart - * osThreadPass is renamed to osThreadYield - * Version 1.01 - * Support for C++ interface - * - const attribute removed from the osXxxxDef_t typedef's - * - const attribute added to the osXxxxDef macros - * Added: osTimerDelete, osMutexDelete, osSemaphoreDelete - * Added: osKernelInitialize - * Version 1.02 - * Control functions for short timeouts in microsecond resolution: - * Added: osKernelSysTick, osKernelSysTickFrequency, osKernelSysTickMicroSec - * Removed: osSignalGet - * - * - *---------------------------------------------------------------------------- - * - * Portions Copyright © 2016 STMicroelectronics International N.V. All rights reserved. - * Portions Copyright (c) 2013 ARM LIMITED - * All rights reserved. - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions are met: - * - Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * - Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in the - * documentation and/or other materials provided with the distribution. - * - Neither the name of ARM nor the names of its contributors may be used - * to endorse or promote products derived from this software without - * specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" - * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE - * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE - * ARE DISCLAIMED. IN NO EVENT SHALL COPYRIGHT HOLDERS AND CONTRIBUTORS BE - * LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR - * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF - * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS - * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN - * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) - * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE - * POSSIBILITY OF SUCH DAMAGE. - *---------------------------------------------------------------------------*/ - -#include "FreeRTOS.h" -#include "task.h" -#include "timers.h" -#include "queue.h" -#include "semphr.h" -#include "event_groups.h" - -/** -\page cmsis_os_h Header File Template: cmsis_os.h - -The file \b cmsis_os.h is a template header file for a CMSIS-RTOS compliant Real-Time Operating System (RTOS). -Each RTOS that is compliant with CMSIS-RTOS shall provide a specific \b cmsis_os.h header file that represents -its implementation. - -The file cmsis_os.h contains: - - CMSIS-RTOS API function definitions - - struct definitions for parameters and return types - - status and priority values used by CMSIS-RTOS API functions - - macros for defining threads and other kernel objects - - -Name conventions and header file modifications - -All definitions are prefixed with \b os to give an unique name space for CMSIS-RTOS functions. -Definitions that are prefixed \b os_ are not used in the application code but local to this header file. -All definitions and functions that belong to a module are grouped and have a common prefix, i.e. \b osThread. - -Definitions that are marked with CAN BE CHANGED can be adapted towards the needs of the actual CMSIS-RTOS implementation. -These definitions can be specific to the underlying RTOS kernel. - -Definitions that are marked with MUST REMAIN UNCHANGED cannot be altered. Otherwise the CMSIS-RTOS implementation is no longer -compliant to the standard. Note that some functions are optional and need not to be provided by every CMSIS-RTOS implementation. - - -Function calls from interrupt service routines - -The following CMSIS-RTOS functions can be called from threads and interrupt service routines (ISR): - - \ref osSignalSet - - \ref osSemaphoreRelease - - \ref osPoolAlloc, \ref osPoolCAlloc, \ref osPoolFree - - \ref osMessagePut, \ref osMessageGet - - \ref osMailAlloc, \ref osMailCAlloc, \ref osMailGet, \ref osMailPut, \ref osMailFree - -Functions that cannot be called from an ISR are verifying the interrupt status and return in case that they are called -from an ISR context the status code \b osErrorISR. In some implementations this condition might be caught using the HARD FAULT vector. - -Some CMSIS-RTOS implementations support CMSIS-RTOS function calls from multiple ISR at the same time. -If this is impossible, the CMSIS-RTOS rejects calls by nested ISR functions with the status code \b osErrorISRRecursive. - - -Define and reference object definitions - -With \#define osObjectsExternal objects are defined as external symbols. This allows to create a consistent header file -that is used throughout a project as shown below: - -Header File -\code -#include // CMSIS RTOS header file - -// Thread definition -extern void thread_sample (void const *argument); // function prototype -osThreadDef (thread_sample, osPriorityBelowNormal, 1, 100); - -// Pool definition -osPoolDef(MyPool, 10, long); -\endcode - - -This header file defines all objects when included in a C/C++ source file. When \#define osObjectsExternal is -present before the header file, the objects are defined as external symbols. A single consistent header file can therefore be -used throughout the whole project. - -Example -\code -#include "osObjects.h" // Definition of the CMSIS-RTOS objects -\endcode - -\code -#define osObjectExternal // Objects will be defined as external symbols -#include "osObjects.h" // Reference to the CMSIS-RTOS objects -\endcode - -*/ - -#ifndef _CMSIS_OS_H -#define _CMSIS_OS_H - -/// \note MUST REMAIN UNCHANGED: \b osCMSIS identifies the CMSIS-RTOS API version. -#define osCMSIS 0x10002 ///< API version (main [31:16] .sub [15:0]) - -/// \note CAN BE CHANGED: \b osCMSIS_KERNEL identifies the underlying RTOS kernel and version number. -#define osCMSIS_KERNEL 0x10000 ///< RTOS identification and version (main [31:16] .sub [15:0]) - -/// \note MUST REMAIN UNCHANGED: \b osKernelSystemId shall be consistent in every CMSIS-RTOS. -#define osKernelSystemId "KERNEL V1.00" ///< RTOS identification string - -/// \note MUST REMAIN UNCHANGED: \b osFeature_xxx shall be consistent in every CMSIS-RTOS. -#define osFeature_MainThread 1 ///< main thread 1=main can be thread, 0=not available -#define osFeature_Pool 1 ///< Memory Pools: 1=available, 0=not available -#define osFeature_MailQ 1 ///< Mail Queues: 1=available, 0=not available -#define osFeature_MessageQ 1 ///< Message Queues: 1=available, 0=not available -#define osFeature_Signals 8 ///< maximum number of Signal Flags available per thread -#define osFeature_Semaphore 1 ///< osFeature_Semaphore function: 1=available, 0=not available -#define osFeature_Wait 0 ///< osWait function: 1=available, 0=not available -#define osFeature_SysTick 1 ///< osKernelSysTick functions: 1=available, 0=not available - -#ifdef __cplusplus -extern "C" -{ -#endif - - -// ==== Enumeration, structures, defines ==== - -/// Priority used for thread control. -/// \note MUST REMAIN UNCHANGED: \b osPriority shall be consistent in every CMSIS-RTOS. -typedef enum { - osPriorityIdle = -3, ///< priority: idle (lowest) - osPriorityLow = -2, ///< priority: low - osPriorityBelowNormal = -1, ///< priority: below normal - osPriorityNormal = 0, ///< priority: normal (default) - osPriorityAboveNormal = +1, ///< priority: above normal - osPriorityHigh = +2, ///< priority: high - osPriorityRealtime = +3, ///< priority: realtime (highest) - osPriorityError = 0x84 ///< system cannot determine priority or thread has illegal priority -} osPriority; - -/// Timeout value. -/// \note MUST REMAIN UNCHANGED: \b osWaitForever shall be consistent in every CMSIS-RTOS. -#define osWaitForever 0xFFFFFFFF ///< wait forever timeout value - -/// Status code values returned by CMSIS-RTOS functions. -/// \note MUST REMAIN UNCHANGED: \b osStatus shall be consistent in every CMSIS-RTOS. -typedef enum { - osOK = 0, ///< function completed; no error or event occurred. - osEventSignal = 0x08, ///< function completed; signal event occurred. - osEventMessage = 0x10, ///< function completed; message event occurred. - osEventMail = 0x20, ///< function completed; mail event occurred. - osEventTimeout = 0x40, ///< function completed; timeout occurred. - osErrorParameter = 0x80, ///< parameter error: a mandatory parameter was missing or specified an incorrect object. - osErrorResource = 0x81, ///< resource not available: a specified resource was not available. - osErrorTimeoutResource = 0xC1, ///< resource not available within given time: a specified resource was not available within the timeout period. - osErrorISR = 0x82, ///< not allowed in ISR context: the function cannot be called from interrupt service routines. - osErrorISRRecursive = 0x83, ///< function called multiple times from ISR with same object. - osErrorPriority = 0x84, ///< system cannot determine priority or thread has illegal priority. - osErrorNoMemory = 0x85, ///< system is out of memory: it was impossible to allocate or reserve memory for the operation. - osErrorValue = 0x86, ///< value of a parameter is out of range. - osErrorOS = 0xFF, ///< unspecified RTOS error: run-time error but no other error message fits. - os_status_reserved = 0x7FFFFFFF ///< prevent from enum down-size compiler optimization. -} osStatus; - -#if ( INCLUDE_eTaskGetState == 1 ) -/* Thread state returned by osThreadGetState */ -typedef enum { - osThreadRunning = 0x0, /* A thread is querying the state of itself, so must be running. */ - osThreadReady = 0x1 , /* The thread being queried is in a read or pending ready list. */ - osThreadBlocked = 0x2, /* The thread being queried is in the Blocked state. */ - osThreadSuspended = 0x3, /* The thread being queried is in the Suspended state, or is in the Blocked state with an infinite time out. */ - osThreadDeleted = 0x4, /* The thread being queried has been deleted, but its TCB has not yet been freed. */ - osThreadError = 0x7FFFFFFF -} osThreadState; -#endif /* INCLUDE_eTaskGetState */ - -/// Timer type value for the timer definition. -/// \note MUST REMAIN UNCHANGED: \b os_timer_type shall be consistent in every CMSIS-RTOS. -typedef enum { - osTimerOnce = 0, ///< one-shot timer - osTimerPeriodic = 1 ///< repeating timer -} os_timer_type; - -/// Entry point of a thread. -/// \note MUST REMAIN UNCHANGED: \b os_pthread shall be consistent in every CMSIS-RTOS. -typedef void (*os_pthread) (void const *argument); - -/// Entry point of a timer call back function. -/// \note MUST REMAIN UNCHANGED: \b os_ptimer shall be consistent in every CMSIS-RTOS. -typedef void (*os_ptimer) (void const *argument); - -// >>> the following data type definitions may shall adapted towards a specific RTOS - -/// Thread ID identifies the thread (pointer to a thread control block). -/// \note CAN BE CHANGED: \b os_thread_cb is implementation specific in every CMSIS-RTOS. -typedef TaskHandle_t osThreadId; - -/// Timer ID identifies the timer (pointer to a timer control block). -/// \note CAN BE CHANGED: \b os_timer_cb is implementation specific in every CMSIS-RTOS. -typedef TimerHandle_t osTimerId; - -/// Mutex ID identifies the mutex (pointer to a mutex control block). -/// \note CAN BE CHANGED: \b os_mutex_cb is implementation specific in every CMSIS-RTOS. -typedef SemaphoreHandle_t osMutexId; - -/// Semaphore ID identifies the semaphore (pointer to a semaphore control block). -/// \note CAN BE CHANGED: \b os_semaphore_cb is implementation specific in every CMSIS-RTOS. -typedef SemaphoreHandle_t osSemaphoreId; - -/// Pool ID identifies the memory pool (pointer to a memory pool control block). -/// \note CAN BE CHANGED: \b os_pool_cb is implementation specific in every CMSIS-RTOS. -typedef struct os_pool_cb *osPoolId; - -/// Message ID identifies the message queue (pointer to a message queue control block). -/// \note CAN BE CHANGED: \b os_messageQ_cb is implementation specific in every CMSIS-RTOS. -typedef QueueHandle_t osMessageQId; - -/// Mail ID identifies the mail queue (pointer to a mail queue control block). -/// \note CAN BE CHANGED: \b os_mailQ_cb is implementation specific in every CMSIS-RTOS. -typedef struct os_mailQ_cb *osMailQId; - - -#if( configSUPPORT_STATIC_ALLOCATION == 1 ) - -typedef StaticTask_t osStaticThreadDef_t; -typedef StaticTimer_t osStaticTimerDef_t; -typedef StaticSemaphore_t osStaticMutexDef_t; -typedef StaticSemaphore_t osStaticSemaphoreDef_t; -typedef StaticQueue_t osStaticMessageQDef_t; - -#endif - - - - -/// Thread Definition structure contains startup information of a thread. -/// \note CAN BE CHANGED: \b os_thread_def is implementation specific in every CMSIS-RTOS. -typedef struct os_thread_def { - char *name; ///< Thread name - os_pthread pthread; ///< start address of thread function - osPriority tpriority; ///< initial thread priority - uint32_t instances; ///< maximum number of instances of that thread function - uint32_t stacksize; ///< stack size requirements in bytes; 0 is default stack size -#if( configSUPPORT_STATIC_ALLOCATION == 1 ) - uint32_t *buffer; ///< stack buffer for static allocation; NULL for dynamic allocation - osStaticThreadDef_t *controlblock; ///< control block to hold thread's data for static allocation; NULL for dynamic allocation -#endif -} osThreadDef_t; - -/// Timer Definition structure contains timer parameters. -/// \note CAN BE CHANGED: \b os_timer_def is implementation specific in every CMSIS-RTOS. -typedef struct os_timer_def { - os_ptimer ptimer; ///< start address of a timer function -#if( configSUPPORT_STATIC_ALLOCATION == 1 ) - osStaticTimerDef_t *controlblock; ///< control block to hold timer's data for static allocation; NULL for dynamic allocation -#endif -} osTimerDef_t; - -/// Mutex Definition structure contains setup information for a mutex. -/// \note CAN BE CHANGED: \b os_mutex_def is implementation specific in every CMSIS-RTOS. -typedef struct os_mutex_def { - uint32_t dummy; ///< dummy value. -#if( configSUPPORT_STATIC_ALLOCATION == 1 ) - osStaticMutexDef_t *controlblock; ///< control block for static allocation; NULL for dynamic allocation -#endif -} osMutexDef_t; - -/// Semaphore Definition structure contains setup information for a semaphore. -/// \note CAN BE CHANGED: \b os_semaphore_def is implementation specific in every CMSIS-RTOS. -typedef struct os_semaphore_def { - uint32_t dummy; ///< dummy value. -#if( configSUPPORT_STATIC_ALLOCATION == 1 ) - osStaticSemaphoreDef_t *controlblock; ///< control block for static allocation; NULL for dynamic allocation -#endif -} osSemaphoreDef_t; - -/// Definition structure for memory block allocation. -/// \note CAN BE CHANGED: \b os_pool_def is implementation specific in every CMSIS-RTOS. -typedef struct os_pool_def { - uint32_t pool_sz; ///< number of items (elements) in the pool - uint32_t item_sz; ///< size of an item - void *pool; ///< pointer to memory for pool -} osPoolDef_t; - -/// Definition structure for message queue. -/// \note CAN BE CHANGED: \b os_messageQ_def is implementation specific in every CMSIS-RTOS. -typedef struct os_messageQ_def { - uint32_t queue_sz; ///< number of elements in the queue - uint32_t item_sz; ///< size of an item -#if( configSUPPORT_STATIC_ALLOCATION == 1 ) - uint8_t *buffer; ///< buffer for static allocation; NULL for dynamic allocation - osStaticMessageQDef_t *controlblock; ///< control block to hold queue's data for static allocation; NULL for dynamic allocation -#endif - //void *pool; ///< memory array for messages -} osMessageQDef_t; - -/// Definition structure for mail queue. -/// \note CAN BE CHANGED: \b os_mailQ_def is implementation specific in every CMSIS-RTOS. -typedef struct os_mailQ_def { - uint32_t queue_sz; ///< number of elements in the queue - uint32_t item_sz; ///< size of an item - struct os_mailQ_cb **cb; -} osMailQDef_t; - -/// Event structure contains detailed information about an event. -/// \note MUST REMAIN UNCHANGED: \b os_event shall be consistent in every CMSIS-RTOS. -/// However the struct may be extended at the end. -typedef struct { - osStatus status; ///< status code: event or error information - union { - uint32_t v; ///< message as 32-bit value - void *p; ///< message or mail as void pointer - int32_t signals; ///< signal flags - } value; ///< event value - union { - osMailQId mail_id; ///< mail id obtained by \ref osMailCreate - osMessageQId message_id; ///< message id obtained by \ref osMessageCreate - } def; ///< event definition -} osEvent; - - -// ==== Kernel Control Functions ==== - -/// Initialize the RTOS Kernel for creating objects. -/// \return status code that indicates the execution status of the function. -/// \note MUST REMAIN UNCHANGED: \b osKernelInitialize shall be consistent in every CMSIS-RTOS. -osStatus osKernelInitialize (void); - -/// Start the RTOS Kernel. -/// \return status code that indicates the execution status of the function. -/// \note MUST REMAIN UNCHANGED: \b osKernelStart shall be consistent in every CMSIS-RTOS. -osStatus osKernelStart (void); - -/// Check if the RTOS kernel is already started. -/// \note MUST REMAIN UNCHANGED: \b osKernelRunning shall be consistent in every CMSIS-RTOS. -/// \return 0 RTOS is not started, 1 RTOS is started. -int32_t osKernelRunning(void); - -#if (defined (osFeature_SysTick) && (osFeature_SysTick != 0)) // System Timer available - -/// Get the RTOS kernel system timer counter -/// \note MUST REMAIN UNCHANGED: \b osKernelSysTick shall be consistent in every CMSIS-RTOS. -/// \return RTOS kernel system timer as 32-bit value -uint32_t osKernelSysTick (void); - -/// The RTOS kernel system timer frequency in Hz -/// \note Reflects the system timer setting and is typically defined in a configuration file. -#define osKernelSysTickFrequency (configTICK_RATE_HZ) - -/// Convert a microseconds value to a RTOS kernel system timer value. -/// \param microsec time value in microseconds. -/// \return time value normalized to the \ref osKernelSysTickFrequency -#define osKernelSysTickMicroSec(microsec) (((uint64_t)microsec * (osKernelSysTickFrequency)) / 1000000) - -#endif // System Timer available - -// ==== Thread Management ==== - -/// Create a Thread Definition with function, priority, and stack requirements. -/// \param name name of the thread function. -/// \param priority initial priority of the thread function. -/// \param instances number of possible thread instances. -/// \param stacksz stack size (in bytes) requirements for the thread function. -/// \note CAN BE CHANGED: The parameters to \b osThreadDef shall be consistent but the -/// macro body is implementation specific in every CMSIS-RTOS. -#if defined (osObjectsExternal) // object is external -#define osThreadDef(name, thread, priority, instances, stacksz) \ -extern const osThreadDef_t os_thread_def_##name -#else // define the object - -#if( configSUPPORT_STATIC_ALLOCATION == 1 ) -#define osThreadDef(name, thread, priority, instances, stacksz) \ -const osThreadDef_t os_thread_def_##name = \ -{ #name, (thread), (priority), (instances), (stacksz), NULL, NULL } - -#define osThreadStaticDef(name, thread, priority, instances, stacksz, buffer, control) \ -const osThreadDef_t os_thread_def_##name = \ -{ #name, (thread), (priority), (instances), (stacksz), (buffer), (control) } -#else //configSUPPORT_STATIC_ALLOCATION == 0 - -#define osThreadDef(name, thread, priority, instances, stacksz) \ -const osThreadDef_t os_thread_def_##name = \ -{ #name, (thread), (priority), (instances), (stacksz)} -#endif -#endif - -/// Access a Thread definition. -/// \param name name of the thread definition object. -/// \note CAN BE CHANGED: The parameter to \b osThread shall be consistent but the -/// macro body is implementation specific in every CMSIS-RTOS. -#define osThread(name) \ -&os_thread_def_##name - -/// Create a thread and add it to Active Threads and set it to state READY. -/// \param[in] thread_def thread definition referenced with \ref osThread. -/// \param[in] argument pointer that is passed to the thread function as start argument. -/// \return thread ID for reference by other functions or NULL in case of error. -/// \note MUST REMAIN UNCHANGED: \b osThreadCreate shall be consistent in every CMSIS-RTOS. -osThreadId osThreadCreate (const osThreadDef_t *thread_def, void *argument); - -/// Return the thread ID of the current running thread. -/// \return thread ID for reference by other functions or NULL in case of error. -/// \note MUST REMAIN UNCHANGED: \b osThreadGetId shall be consistent in every CMSIS-RTOS. -osThreadId osThreadGetId (void); - -/// Terminate execution of a thread and remove it from Active Threads. -/// \param[in] thread_id thread ID obtained by \ref osThreadCreate or \ref osThreadGetId. -/// \return status code that indicates the execution status of the function. -/// \note MUST REMAIN UNCHANGED: \b osThreadTerminate shall be consistent in every CMSIS-RTOS. -osStatus osThreadTerminate (osThreadId thread_id); - -/// Pass control to next thread that is in state \b READY. -/// \return status code that indicates the execution status of the function. -/// \note MUST REMAIN UNCHANGED: \b osThreadYield shall be consistent in every CMSIS-RTOS. -osStatus osThreadYield (void); - -/// Change priority of an active thread. -/// \param[in] thread_id thread ID obtained by \ref osThreadCreate or \ref osThreadGetId. -/// \param[in] priority new priority value for the thread function. -/// \return status code that indicates the execution status of the function. -/// \note MUST REMAIN UNCHANGED: \b osThreadSetPriority shall be consistent in every CMSIS-RTOS. -osStatus osThreadSetPriority (osThreadId thread_id, osPriority priority); - -/// Get current priority of an active thread. -/// \param[in] thread_id thread ID obtained by \ref osThreadCreate or \ref osThreadGetId. -/// \return current priority value of the thread function. -/// \note MUST REMAIN UNCHANGED: \b osThreadGetPriority shall be consistent in every CMSIS-RTOS. -osPriority osThreadGetPriority (osThreadId thread_id); - - -// ==== Generic Wait Functions ==== - -/// Wait for Timeout (Time Delay). -/// \param[in] millisec time delay value -/// \return status code that indicates the execution status of the function. -osStatus osDelay (uint32_t millisec); - -#if (defined (osFeature_Wait) && (osFeature_Wait != 0)) // Generic Wait available - -/// Wait for Signal, Message, Mail, or Timeout. -/// \param[in] millisec timeout value or 0 in case of no time-out -/// \return event that contains signal, message, or mail information or error code. -/// \note MUST REMAIN UNCHANGED: \b osWait shall be consistent in every CMSIS-RTOS. -osEvent osWait (uint32_t millisec); - -#endif // Generic Wait available - - -// ==== Timer Management Functions ==== -/// Define a Timer object. -/// \param name name of the timer object. -/// \param function name of the timer call back function. -/// \note CAN BE CHANGED: The parameter to \b osTimerDef shall be consistent but the -/// macro body is implementation specific in every CMSIS-RTOS. -#if defined (osObjectsExternal) // object is external -#define osTimerDef(name, function) \ -extern const osTimerDef_t os_timer_def_##name -#else // define the object - -#if( configSUPPORT_STATIC_ALLOCATION == 1 ) -#define osTimerDef(name, function) \ -const osTimerDef_t os_timer_def_##name = \ -{ (function), NULL } - -#define osTimerStaticDef(name, function, control) \ -const osTimerDef_t os_timer_def_##name = \ -{ (function), (control) } -#else //configSUPPORT_STATIC_ALLOCATION == 0 -#define osTimerDef(name, function) \ -const osTimerDef_t os_timer_def_##name = \ -{ (function) } -#endif -#endif - -/// Access a Timer definition. -/// \param name name of the timer object. -/// \note CAN BE CHANGED: The parameter to \b osTimer shall be consistent but the -/// macro body is implementation specific in every CMSIS-RTOS. -#define osTimer(name) \ -&os_timer_def_##name - -/// Create a timer. -/// \param[in] timer_def timer object referenced with \ref osTimer. -/// \param[in] type osTimerOnce for one-shot or osTimerPeriodic for periodic behavior. -/// \param[in] argument argument to the timer call back function. -/// \return timer ID for reference by other functions or NULL in case of error. -/// \note MUST REMAIN UNCHANGED: \b osTimerCreate shall be consistent in every CMSIS-RTOS. -osTimerId osTimerCreate (const osTimerDef_t *timer_def, os_timer_type type, void *argument); - -/// Start or restart a timer. -/// \param[in] timer_id timer ID obtained by \ref osTimerCreate. -/// \param[in] millisec time delay value of the timer. -/// \return status code that indicates the execution status of the function. -/// \note MUST REMAIN UNCHANGED: \b osTimerStart shall be consistent in every CMSIS-RTOS. -osStatus osTimerStart (osTimerId timer_id, uint32_t millisec); - -/// Stop the timer. -/// \param[in] timer_id timer ID obtained by \ref osTimerCreate. -/// \return status code that indicates the execution status of the function. -/// \note MUST REMAIN UNCHANGED: \b osTimerStop shall be consistent in every CMSIS-RTOS. -osStatus osTimerStop (osTimerId timer_id); - -/// Delete a timer that was created by \ref osTimerCreate. -/// \param[in] timer_id timer ID obtained by \ref osTimerCreate. -/// \return status code that indicates the execution status of the function. -/// \note MUST REMAIN UNCHANGED: \b osTimerDelete shall be consistent in every CMSIS-RTOS. -osStatus osTimerDelete (osTimerId timer_id); - - -// ==== Signal Management ==== - -/// Set the specified Signal Flags of an active thread. -/// \param[in] thread_id thread ID obtained by \ref osThreadCreate or \ref osThreadGetId. -/// \param[in] signals specifies the signal flags of the thread that should be set. -/// \return osOK if successful, osErrorOS if failed. -/// \note MUST REMAIN UNCHANGED: \b osSignalSet shall be consistent in every CMSIS-RTOS. -int32_t osSignalSet (osThreadId thread_id, int32_t signals); - -/// Clear the specified Signal Flags of an active thread. -/// \param[in] thread_id thread ID obtained by \ref osThreadCreate or \ref osThreadGetId. -/// \param[in] signals specifies the signal flags of the thread that shall be cleared. -/// \return previous signal flags of the specified thread or 0x80000000 in case of incorrect parameters. -/// \note MUST REMAIN UNCHANGED: \b osSignalClear shall be consistent in every CMSIS-RTOS. -int32_t osSignalClear (osThreadId thread_id, int32_t signals); - -/// Wait for one or more Signal Flags to become signaled for the current \b RUNNING thread. -/// \param[in] signals wait until all specified signal flags set or 0 for any single signal flag. -/// \param[in] millisec timeout value or 0 in case of no time-out. -/// \return event flag information or error code. -/// \note MUST REMAIN UNCHANGED: \b osSignalWait shall be consistent in every CMSIS-RTOS. -osEvent osSignalWait (int32_t signals, uint32_t millisec); - - -// ==== Mutex Management ==== - -/// Define a Mutex. -/// \param name name of the mutex object. -/// \note CAN BE CHANGED: The parameter to \b osMutexDef shall be consistent but the -/// macro body is implementation specific in every CMSIS-RTOS. -#if defined (osObjectsExternal) // object is external -#define osMutexDef(name) \ -extern const osMutexDef_t os_mutex_def_##name -#else // define the object - -#if( configSUPPORT_STATIC_ALLOCATION == 1 ) -#define osMutexDef(name) \ -const osMutexDef_t os_mutex_def_##name = { 0, NULL } - -#define osMutexStaticDef(name, control) \ -const osMutexDef_t os_mutex_def_##name = { 0, (control) } -#else //configSUPPORT_STATIC_ALLOCATION == 0 -#define osMutexDef(name) \ -const osMutexDef_t os_mutex_def_##name = { 0 } - -#endif - -#endif - -/// Access a Mutex definition. -/// \param name name of the mutex object. -/// \note CAN BE CHANGED: The parameter to \b osMutex shall be consistent but the -/// macro body is implementation specific in every CMSIS-RTOS. -#define osMutex(name) \ -&os_mutex_def_##name - -/// Create and Initialize a Mutex object. -/// \param[in] mutex_def mutex definition referenced with \ref osMutex. -/// \return mutex ID for reference by other functions or NULL in case of error. -/// \note MUST REMAIN UNCHANGED: \b osMutexCreate shall be consistent in every CMSIS-RTOS. -osMutexId osMutexCreate (const osMutexDef_t *mutex_def); - -/// Wait until a Mutex becomes available. -/// \param[in] mutex_id mutex ID obtained by \ref osMutexCreate. -/// \param[in] millisec timeout value or 0 in case of no time-out. -/// \return status code that indicates the execution status of the function. -/// \note MUST REMAIN UNCHANGED: \b osMutexWait shall be consistent in every CMSIS-RTOS. -osStatus osMutexWait (osMutexId mutex_id, uint32_t millisec); - -/// Release a Mutex that was obtained by \ref osMutexWait. -/// \param[in] mutex_id mutex ID obtained by \ref osMutexCreate. -/// \return status code that indicates the execution status of the function. -/// \note MUST REMAIN UNCHANGED: \b osMutexRelease shall be consistent in every CMSIS-RTOS. -osStatus osMutexRelease (osMutexId mutex_id); - -/// Delete a Mutex that was created by \ref osMutexCreate. -/// \param[in] mutex_id mutex ID obtained by \ref osMutexCreate. -/// \return status code that indicates the execution status of the function. -/// \note MUST REMAIN UNCHANGED: \b osMutexDelete shall be consistent in every CMSIS-RTOS. -osStatus osMutexDelete (osMutexId mutex_id); - - -// ==== Semaphore Management Functions ==== - -#if (defined (osFeature_Semaphore) && (osFeature_Semaphore != 0)) // Semaphore available - -/// Define a Semaphore object. -/// \param name name of the semaphore object. -/// \note CAN BE CHANGED: The parameter to \b osSemaphoreDef shall be consistent but the -/// macro body is implementation specific in every CMSIS-RTOS. -#if defined (osObjectsExternal) // object is external -#define osSemaphoreDef(name) \ -extern const osSemaphoreDef_t os_semaphore_def_##name -#else // define the object - -#if( configSUPPORT_STATIC_ALLOCATION == 1 ) -#define osSemaphoreDef(name) \ -const osSemaphoreDef_t os_semaphore_def_##name = { 0, NULL } - -#define osSemaphoreStaticDef(name, control) \ -const osSemaphoreDef_t os_semaphore_def_##name = { 0, (control) } - -#else //configSUPPORT_STATIC_ALLOCATION == 0 -#define osSemaphoreDef(name) \ -const osSemaphoreDef_t os_semaphore_def_##name = { 0 } -#endif -#endif - -/// Access a Semaphore definition. -/// \param name name of the semaphore object. -/// \note CAN BE CHANGED: The parameter to \b osSemaphore shall be consistent but the -/// macro body is implementation specific in every CMSIS-RTOS. -#define osSemaphore(name) \ -&os_semaphore_def_##name - -/// Create and Initialize a Semaphore object used for managing resources. -/// \param[in] semaphore_def semaphore definition referenced with \ref osSemaphore. -/// \param[in] count number of available resources. -/// \return semaphore ID for reference by other functions or NULL in case of error. -/// \note MUST REMAIN UNCHANGED: \b osSemaphoreCreate shall be consistent in every CMSIS-RTOS. -osSemaphoreId osSemaphoreCreate (const osSemaphoreDef_t *semaphore_def, int32_t count); - -/// Wait until a Semaphore token becomes available. -/// \param[in] semaphore_id semaphore object referenced with \ref osSemaphoreCreate. -/// \param[in] millisec timeout value or 0 in case of no time-out. -/// \return number of available tokens, or -1 in case of incorrect parameters. -/// \note MUST REMAIN UNCHANGED: \b osSemaphoreWait shall be consistent in every CMSIS-RTOS. -int32_t osSemaphoreWait (osSemaphoreId semaphore_id, uint32_t millisec); - -/// Release a Semaphore token. -/// \param[in] semaphore_id semaphore object referenced with \ref osSemaphoreCreate. -/// \return status code that indicates the execution status of the function. -/// \note MUST REMAIN UNCHANGED: \b osSemaphoreRelease shall be consistent in every CMSIS-RTOS. -osStatus osSemaphoreRelease (osSemaphoreId semaphore_id); - -/// Delete a Semaphore that was created by \ref osSemaphoreCreate. -/// \param[in] semaphore_id semaphore object referenced with \ref osSemaphoreCreate. -/// \return status code that indicates the execution status of the function. -/// \note MUST REMAIN UNCHANGED: \b osSemaphoreDelete shall be consistent in every CMSIS-RTOS. -osStatus osSemaphoreDelete (osSemaphoreId semaphore_id); - -#endif // Semaphore available - - -// ==== Memory Pool Management Functions ==== - -#if (defined (osFeature_Pool) && (osFeature_Pool != 0)) // Memory Pool Management available - -/// \brief Define a Memory Pool. -/// \param name name of the memory pool. -/// \param no maximum number of blocks (objects) in the memory pool. -/// \param type data type of a single block (object). -/// \note CAN BE CHANGED: The parameter to \b osPoolDef shall be consistent but the -/// macro body is implementation specific in every CMSIS-RTOS. -#if defined (osObjectsExternal) // object is external -#define osPoolDef(name, no, type) \ -extern const osPoolDef_t os_pool_def_##name -#else // define the object -#define osPoolDef(name, no, type) \ -const osPoolDef_t os_pool_def_##name = \ -{ (no), sizeof(type), NULL } -#endif - -/// \brief Access a Memory Pool definition. -/// \param name name of the memory pool -/// \note CAN BE CHANGED: The parameter to \b osPool shall be consistent but the -/// macro body is implementation specific in every CMSIS-RTOS. -#define osPool(name) \ -&os_pool_def_##name - -/// Create and Initialize a memory pool. -/// \param[in] pool_def memory pool definition referenced with \ref osPool. -/// \return memory pool ID for reference by other functions or NULL in case of error. -/// \note MUST REMAIN UNCHANGED: \b osPoolCreate shall be consistent in every CMSIS-RTOS. -osPoolId osPoolCreate (const osPoolDef_t *pool_def); - -/// Allocate a memory block from a memory pool. -/// \param[in] pool_id memory pool ID obtain referenced with \ref osPoolCreate. -/// \return address of the allocated memory block or NULL in case of no memory available. -/// \note MUST REMAIN UNCHANGED: \b osPoolAlloc shall be consistent in every CMSIS-RTOS. -void *osPoolAlloc (osPoolId pool_id); - -/// Allocate a memory block from a memory pool and set memory block to zero. -/// \param[in] pool_id memory pool ID obtain referenced with \ref osPoolCreate. -/// \return address of the allocated memory block or NULL in case of no memory available. -/// \note MUST REMAIN UNCHANGED: \b osPoolCAlloc shall be consistent in every CMSIS-RTOS. -void *osPoolCAlloc (osPoolId pool_id); - -/// Return an allocated memory block back to a specific memory pool. -/// \param[in] pool_id memory pool ID obtain referenced with \ref osPoolCreate. -/// \param[in] block address of the allocated memory block that is returned to the memory pool. -/// \return status code that indicates the execution status of the function. -/// \note MUST REMAIN UNCHANGED: \b osPoolFree shall be consistent in every CMSIS-RTOS. -osStatus osPoolFree (osPoolId pool_id, void *block); - -#endif // Memory Pool Management available - - -// ==== Message Queue Management Functions ==== - -#if (defined (osFeature_MessageQ) && (osFeature_MessageQ != 0)) // Message Queues available - -/// \brief Create a Message Queue Definition. -/// \param name name of the queue. -/// \param queue_sz maximum number of messages in the queue. -/// \param type data type of a single message element (for debugger). -/// \note CAN BE CHANGED: The parameter to \b osMessageQDef shall be consistent but the -/// macro body is implementation specific in every CMSIS-RTOS. -#if defined (osObjectsExternal) // object is external -#define osMessageQDef(name, queue_sz, type) \ -extern const osMessageQDef_t os_messageQ_def_##name -#else // define the object -#if( configSUPPORT_STATIC_ALLOCATION == 1 ) -#define osMessageQDef(name, queue_sz, type) \ -const osMessageQDef_t os_messageQ_def_##name = \ -{ (queue_sz), sizeof (type), NULL, NULL } - -#define osMessageQStaticDef(name, queue_sz, type, buffer, control) \ -const osMessageQDef_t os_messageQ_def_##name = \ -{ (queue_sz), sizeof (type) , (buffer), (control)} -#else //configSUPPORT_STATIC_ALLOCATION == 1 -#define osMessageQDef(name, queue_sz, type) \ -const osMessageQDef_t os_messageQ_def_##name = \ -{ (queue_sz), sizeof (type) } - -#endif -#endif - -/// \brief Access a Message Queue Definition. -/// \param name name of the queue -/// \note CAN BE CHANGED: The parameter to \b osMessageQ shall be consistent but the -/// macro body is implementation specific in every CMSIS-RTOS. -#define osMessageQ(name) \ -&os_messageQ_def_##name - -/// Create and Initialize a Message Queue. -/// \param[in] queue_def queue definition referenced with \ref osMessageQ. -/// \param[in] thread_id thread ID (obtained by \ref osThreadCreate or \ref osThreadGetId) or NULL. -/// \return message queue ID for reference by other functions or NULL in case of error. -/// \note MUST REMAIN UNCHANGED: \b osMessageCreate shall be consistent in every CMSIS-RTOS. -osMessageQId osMessageCreate (const osMessageQDef_t *queue_def, osThreadId thread_id); - -/// Put a Message to a Queue. -/// \param[in] queue_id message queue ID obtained with \ref osMessageCreate. -/// \param[in] info message information. -/// \param[in] millisec timeout value or 0 in case of no time-out. -/// \return status code that indicates the execution status of the function. -/// \note MUST REMAIN UNCHANGED: \b osMessagePut shall be consistent in every CMSIS-RTOS. -osStatus osMessagePut (osMessageQId queue_id, uint32_t info, uint32_t millisec); - -/// Get a Message or Wait for a Message from a Queue. -/// \param[in] queue_id message queue ID obtained with \ref osMessageCreate. -/// \param[in] millisec timeout value or 0 in case of no time-out. -/// \return event information that includes status code. -/// \note MUST REMAIN UNCHANGED: \b osMessageGet shall be consistent in every CMSIS-RTOS. -osEvent osMessageGet (osMessageQId queue_id, uint32_t millisec); - -#endif // Message Queues available - - -// ==== Mail Queue Management Functions ==== - -#if (defined (osFeature_MailQ) && (osFeature_MailQ != 0)) // Mail Queues available - -/// \brief Create a Mail Queue Definition. -/// \param name name of the queue -/// \param queue_sz maximum number of messages in queue -/// \param type data type of a single message element -/// \note CAN BE CHANGED: The parameter to \b osMailQDef shall be consistent but the -/// macro body is implementation specific in every CMSIS-RTOS. -#if defined (osObjectsExternal) // object is external -#define osMailQDef(name, queue_sz, type) \ -extern struct os_mailQ_cb *os_mailQ_cb_##name \ -extern osMailQDef_t os_mailQ_def_##name -#else // define the object -#define osMailQDef(name, queue_sz, type) \ -struct os_mailQ_cb *os_mailQ_cb_##name; \ -const osMailQDef_t os_mailQ_def_##name = \ -{ (queue_sz), sizeof (type), (&os_mailQ_cb_##name) } -#endif - -/// \brief Access a Mail Queue Definition. -/// \param name name of the queue -/// \note CAN BE CHANGED: The parameter to \b osMailQ shall be consistent but the -/// macro body is implementation specific in every CMSIS-RTOS. -#define osMailQ(name) \ -&os_mailQ_def_##name - -/// Create and Initialize mail queue. -/// \param[in] queue_def reference to the mail queue definition obtain with \ref osMailQ -/// \param[in] thread_id thread ID (obtained by \ref osThreadCreate or \ref osThreadGetId) or NULL. -/// \return mail queue ID for reference by other functions or NULL in case of error. -/// \note MUST REMAIN UNCHANGED: \b osMailCreate shall be consistent in every CMSIS-RTOS. -osMailQId osMailCreate (const osMailQDef_t *queue_def, osThreadId thread_id); - -/// Allocate a memory block from a mail. -/// \param[in] queue_id mail queue ID obtained with \ref osMailCreate. -/// \param[in] millisec timeout value or 0 in case of no time-out -/// \return pointer to memory block that can be filled with mail or NULL in case of error. -/// \note MUST REMAIN UNCHANGED: \b osMailAlloc shall be consistent in every CMSIS-RTOS. -void *osMailAlloc (osMailQId queue_id, uint32_t millisec); - -/// Allocate a memory block from a mail and set memory block to zero. -/// \param[in] queue_id mail queue ID obtained with \ref osMailCreate. -/// \param[in] millisec timeout value or 0 in case of no time-out -/// \return pointer to memory block that can be filled with mail or NULL in case of error. -/// \note MUST REMAIN UNCHANGED: \b osMailCAlloc shall be consistent in every CMSIS-RTOS. -void *osMailCAlloc (osMailQId queue_id, uint32_t millisec); - -/// Put a mail to a queue. -/// \param[in] queue_id mail queue ID obtained with \ref osMailCreate. -/// \param[in] mail memory block previously allocated with \ref osMailAlloc or \ref osMailCAlloc. -/// \return status code that indicates the execution status of the function. -/// \note MUST REMAIN UNCHANGED: \b osMailPut shall be consistent in every CMSIS-RTOS. -osStatus osMailPut (osMailQId queue_id, void *mail); - -/// Get a mail from a queue. -/// \param[in] queue_id mail queue ID obtained with \ref osMailCreate. -/// \param[in] millisec timeout value or 0 in case of no time-out -/// \return event that contains mail information or error code. -/// \note MUST REMAIN UNCHANGED: \b osMailGet shall be consistent in every CMSIS-RTOS. -osEvent osMailGet (osMailQId queue_id, uint32_t millisec); - -/// Free a memory block from a mail. -/// \param[in] queue_id mail queue ID obtained with \ref osMailCreate. -/// \param[in] mail pointer to the memory block that was obtained with \ref osMailGet. -/// \return status code that indicates the execution status of the function. -/// \note MUST REMAIN UNCHANGED: \b osMailFree shall be consistent in every CMSIS-RTOS. -osStatus osMailFree (osMailQId queue_id, void *mail); - -#endif // Mail Queues available - -/*************************** Additional specific APIs to Free RTOS ************/ -/** -* @brief Handles the tick increment -* @param none. -* @retval none. -*/ -void osSystickHandler(void); - -#if ( INCLUDE_eTaskGetState == 1 ) -/** -* @brief Obtain the state of any thread. -* @param thread_id thread ID obtained by \ref osThreadCreate or \ref osThreadGetId. -* @retval the stae of the thread, states are encoded by the osThreadState enumerated type. -*/ -osThreadState osThreadGetState(osThreadId thread_id); -#endif /* INCLUDE_eTaskGetState */ - -#if ( INCLUDE_eTaskGetState == 1 ) -/** -* @brief Check if a thread is already suspended or not. -* @param thread_id thread ID obtained by \ref osThreadCreate or \ref osThreadGetId. -* @retval status code that indicates the execution status of the function. -*/ - -osStatus osThreadIsSuspended(osThreadId thread_id); - -#endif /* INCLUDE_eTaskGetState */ - -/** -* @brief Suspend execution of a thread. -* @param thread_id thread ID obtained by \ref osThreadCreate or \ref osThreadGetId. -* @retval status code that indicates the execution status of the function. -*/ -osStatus osThreadSuspend (osThreadId thread_id); - -/** -* @brief Resume execution of a suspended thread. -* @param thread_id thread ID obtained by \ref osThreadCreate or \ref osThreadGetId. -* @retval status code that indicates the execution status of the function. -*/ -osStatus osThreadResume (osThreadId thread_id); - -/** -* @brief Suspend execution of a all active threads. -* @retval status code that indicates the execution status of the function. -*/ -osStatus osThreadSuspendAll (void); - -/** -* @brief Resume execution of a all suspended threads. -* @retval status code that indicates the execution status of the function. -*/ -osStatus osThreadResumeAll (void); - -/** -* @brief Delay a task until a specified time -* @param PreviousWakeTime Pointer to a variable that holds the time at which the -* task was last unblocked. PreviousWakeTime must be initialised with the current time -* prior to its first use (PreviousWakeTime = osKernelSysTick() ) -* @param millisec time delay value -* @retval status code that indicates the execution status of the function. -*/ -osStatus osDelayUntil (uint32_t *PreviousWakeTime, uint32_t millisec); - -/** -* @brief Abort the delay for a specific thread -* @param thread_id thread ID obtained by \ref osThreadCreate or \ref osThreadGetId -* @retval status code that indicates the execution status of the function. -*/ -osStatus osAbortDelay(osThreadId thread_id); - -/** -* @brief Lists all the current threads, along with their current state -* and stack usage high water mark. -* @param buffer A buffer into which the above mentioned details -* will be written -* @retval status code that indicates the execution status of the function. -*/ -osStatus osThreadList (uint8_t *buffer); - -/** -* @brief Receive an item from a queue without removing the item from the queue. -* @param queue_id message queue ID obtained with \ref osMessageCreate. -* @param millisec timeout value or 0 in case of no time-out. -* @retval event information that includes status code. -*/ -osEvent osMessagePeek (osMessageQId queue_id, uint32_t millisec); - -/** -* @brief Get the number of messaged stored in a queue. -* @param queue_id message queue ID obtained with \ref osMessageCreate. -* @retval number of messages stored in a queue. -*/ -uint32_t osMessageWaiting(osMessageQId queue_id); - -/** -* @brief Get the available space in a message queue. -* @param queue_id message queue ID obtained with \ref osMessageCreate. -* @retval available space in a message queue. -*/ -uint32_t osMessageAvailableSpace(osMessageQId queue_id); - -/** -* @brief Delete a Message Queue -* @param queue_id message queue ID obtained with \ref osMessageCreate. -* @retval status code that indicates the execution status of the function. -*/ -osStatus osMessageDelete (osMessageQId queue_id); - -/** -* @brief Create and Initialize a Recursive Mutex -* @param mutex_def mutex definition referenced with \ref osMutex. -* @retval mutex ID for reference by other functions or NULL in case of error.. -*/ -osMutexId osRecursiveMutexCreate (const osMutexDef_t *mutex_def); - -/** -* @brief Release a Recursive Mutex -* @param mutex_id mutex ID obtained by \ref osRecursiveMutexCreate. -* @retval status code that indicates the execution status of the function. -*/ -osStatus osRecursiveMutexRelease (osMutexId mutex_id); - -/** -* @brief Release a Recursive Mutex -* @param mutex_id mutex ID obtained by \ref osRecursiveMutexCreate. -* @param millisec timeout value or 0 in case of no time-out. -* @retval status code that indicates the execution status of the function. -*/ -osStatus osRecursiveMutexWait (osMutexId mutex_id, uint32_t millisec); - -/** -* @brief Returns the current count value of a counting semaphore -* @param semaphore_id semaphore_id ID obtained by \ref osSemaphoreCreate. -* @retval count value -*/ -uint32_t osSemaphoreGetCount(osSemaphoreId semaphore_id); - -#ifdef __cplusplus -} -#endif - -#endif // _CMSIS_OS_H diff --git a/RTOS_Dual_Sensor_Single_Board_Testing/Middlewares/Third_Party/FreeRTOS/Source/CMSIS_RTOS_V2/cmsis_os.h b/RTOS_Dual_Sensor_Single_Board_Testing/Middlewares/Third_Party/FreeRTOS/Source/CMSIS_RTOS_V2/cmsis_os.h new file mode 100644 index 0000000..711408a --- /dev/null +++ b/RTOS_Dual_Sensor_Single_Board_Testing/Middlewares/Third_Party/FreeRTOS/Source/CMSIS_RTOS_V2/cmsis_os.h @@ -0,0 +1,846 @@ +/* + * Copyright (c) 2013-2019 ARM Limited. All rights reserved. + * + * SPDX-License-Identifier: Apache-2.0 + * + * Licensed under the Apache License, Version 2.0 (the License); you may + * not use this file except in compliance with the License. + * You may obtain a copy of the License at + * + * www.apache.org/licenses/LICENSE-2.0 + * + * Unless required by applicable law or agreed to in writing, software + * distributed under the License is distributed on an AS IS BASIS, WITHOUT + * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + * See the License for the specific language governing permissions and + * limitations under the License. + * + * ---------------------------------------------------------------------- + * + * $Date: 10. January 2017 + * $Revision: V2.1.0 + * + * Project: CMSIS-RTOS API + * Title: cmsis_os.h FreeRTOS header file + * + * Version 0.02 + * Initial Proposal Phase + * Version 0.03 + * osKernelStart added, optional feature: main started as thread + * osSemaphores have standard behavior + * osTimerCreate does not start the timer, added osTimerStart + * osThreadPass is renamed to osThreadYield + * Version 1.01 + * Support for C++ interface + * - const attribute removed from the osXxxxDef_t typedefs + * - const attribute added to the osXxxxDef macros + * Added: osTimerDelete, osMutexDelete, osSemaphoreDelete + * Added: osKernelInitialize + * Version 1.02 + * Control functions for short timeouts in microsecond resolution: + * Added: osKernelSysTick, osKernelSysTickFrequency, osKernelSysTickMicroSec + * Removed: osSignalGet + * Version 2.0.0 + * OS objects creation without macros (dynamic creation and resource allocation): + * - added: osXxxxNew functions which replace osXxxxCreate + * - added: osXxxxAttr_t structures + * - deprecated: osXxxxCreate functions, osXxxxDef_t structures + * - deprecated: osXxxxDef and osXxxx macros + * osStatus codes simplified and renamed to osStatus_t + * osEvent return structure deprecated + * Kernel: + * - added: osKernelInfo_t and osKernelGetInfo + * - added: osKernelState_t and osKernelGetState (replaces osKernelRunning) + * - added: osKernelLock, osKernelUnlock + * - added: osKernelSuspend, osKernelResume + * - added: osKernelGetTickCount, osKernelGetTickFreq + * - renamed osKernelSysTick to osKernelGetSysTimerCount + * - replaced osKernelSysTickFrequency with osKernelGetSysTimerFreq + * - deprecated osKernelSysTickMicroSec + * Thread: + * - extended number of thread priorities + * - renamed osPrioriry to osPrioriry_t + * - replaced osThreadCreate with osThreadNew + * - added: osThreadGetName + * - added: osThreadState_t and osThreadGetState + * - added: osThreadGetStackSize, osThreadGetStackSpace + * - added: osThreadSuspend, osThreadResume + * - added: osThreadJoin, osThreadDetach, osThreadExit + * - added: osThreadGetCount, osThreadEnumerate + * - added: Thread Flags (moved from Signals) + * Signals: + * - renamed osSignals to osThreadFlags (moved to Thread Flags) + * - changed return value of Set/Clear/Wait functions + * - Clear function limited to current running thread + * - extended Wait function (options) + * - added: osThreadFlagsGet + * Event Flags: + * - added new independent object for handling Event Flags + * Delay and Wait functions: + * - added: osDelayUntil + * - deprecated: osWait + * Timer: + * - replaced osTimerCreate with osTimerNew + * - added: osTimerGetName, osTimerIsRunning + * Mutex: + * - extended: attributes (Recursive, Priority Inherit, Robust) + * - replaced osMutexCreate with osMutexNew + * - renamed osMutexWait to osMutexAcquire + * - added: osMutexGetName, osMutexGetOwner + * Semaphore: + * - extended: maximum and initial token count + * - replaced osSemaphoreCreate with osSemaphoreNew + * - renamed osSemaphoreWait to osSemaphoreAcquire (changed return value) + * - added: osSemaphoreGetName, osSemaphoreGetCount + * Memory Pool: + * - using osMemoryPool prefix instead of osPool + * - replaced osPoolCreate with osMemoryPoolNew + * - extended osMemoryPoolAlloc (timeout) + * - added: osMemoryPoolGetName + * - added: osMemoryPoolGetCapacity, osMemoryPoolGetBlockSize + * - added: osMemoryPoolGetCount, osMemoryPoolGetSpace + * - added: osMemoryPoolDelete + * - deprecated: osPoolCAlloc + * Message Queue: + * - extended: fixed size message instead of a single 32-bit value + * - using osMessageQueue prefix instead of osMessage + * - replaced osMessageCreate with osMessageQueueNew + * - updated: osMessageQueuePut, osMessageQueueGet + * - added: osMessageQueueGetName + * - added: osMessageQueueGetCapacity, osMessageQueueGetMsgSize + * - added: osMessageQueueGetCount, osMessageQueueGetSpace + * - added: osMessageQueueReset, osMessageQueueDelete + * Mail Queue: + * - deprecated (superseded by extended Message Queue functionality) + * Version 2.1.0 + * Support for critical and uncritical sections (nesting safe): + * - updated: osKernelLock, osKernelUnlock + * - added: osKernelRestoreLock + * Updated Thread and Event Flags: + * - changed flags parameter and return type from int32_t to uint32_t + *---------------------------------------------------------------------------*/ + +#ifndef CMSIS_OS_H_ +#define CMSIS_OS_H_ + +#include "FreeRTOS.h" +#include "task.h" + +#define RTOS_ID_n ((tskKERNEL_VERSION_MAJOR << 16) | (tskKERNEL_VERSION_MINOR)) +#define RTOS_ID_s ("FreeRTOS " tskKERNEL_VERSION_NUMBER) + +#define osCMSIS 0x20001U ///< API version (main[31:16].sub[15:0]) + +#define osCMSIS_FreeRTOS RTOS_ID_n ///< RTOS identification and version (main[31:16].sub[15:0]) + +#define osKernelSystemId RTOS_ID_s ///< RTOS identification string + +#define osFeature_MainThread 0 ///< main thread 1=main can be thread, 0=not available +#define osFeature_Signals 24U ///< maximum number of Signal Flags available per thread +#define osFeature_Semaphore 65535U ///< maximum count for \ref osSemaphoreCreate function +#define osFeature_Wait 0 ///< osWait function: 1=available, 0=not available +#define osFeature_SysTick 1 ///< osKernelSysTick functions: 1=available, 0=not available +#define osFeature_Pool 0 ///< Memory Pools: 1=available, 0=not available +#define osFeature_MessageQ 1 ///< Message Queues: 1=available, 0=not available +#define osFeature_MailQ 0 ///< Mail Queues: 1=available, 0=not available + +#if defined(__CC_ARM) +#define os_InRegs __value_in_regs +#elif defined(__ARMCC_VERSION) && (__ARMCC_VERSION >= 6010050) +#define os_InRegs __attribute__((value_in_regs)) +#else +#define os_InRegs +#endif + +#include "cmsis_os2.h" + +#ifdef __cplusplus +extern "C" +{ +#endif + + +// ==== Enumerations, structures, defines ==== + +/// Priority values. +#if (osCMSIS < 0x20000U) +typedef enum { + osPriorityIdle = -3, ///< Priority: idle (lowest) + osPriorityLow = -2, ///< Priority: low + osPriorityBelowNormal = -1, ///< Priority: below normal + osPriorityNormal = 0, ///< Priority: normal (default) + osPriorityAboveNormal = +1, ///< Priority: above normal + osPriorityHigh = +2, ///< Priority: high + osPriorityRealtime = +3, ///< Priority: realtime (highest) + osPriorityError = 0x84, ///< System cannot determine priority or illegal priority. + osPriorityReserved = 0x7FFFFFFF ///< Prevents enum down-size compiler optimization. +} osPriority; +#else +#define osPriority osPriority_t +#endif + +/// Entry point of a thread. +typedef void (*os_pthread) (void const *argument); + +/// Entry point of a timer call back function. +typedef void (*os_ptimer) (void const *argument); + +/// Timer type. +#if (osCMSIS < 0x20000U) +typedef enum { + osTimerOnce = 0, ///< One-shot timer. + osTimerPeriodic = 1 ///< Repeating timer. +} os_timer_type; +#else +#define os_timer_type osTimerType_t +#endif + +/// Timeout value. +#define osWaitForever 0xFFFFFFFFU ///< Wait forever timeout value. + +/// Status code values returned by CMSIS-RTOS functions. +#if (osCMSIS < 0x20000U) +typedef enum { + osOK = 0, ///< Function completed; no error or event occurred. + osEventSignal = 0x08, ///< Function completed; signal event occurred. + osEventMessage = 0x10, ///< Function completed; message event occurred. + osEventMail = 0x20, ///< Function completed; mail event occurred. + osEventTimeout = 0x40, ///< Function completed; timeout occurred. + osErrorParameter = 0x80, ///< Parameter error: a mandatory parameter was missing or specified an incorrect object. + osErrorResource = 0x81, ///< Resource not available: a specified resource was not available. + osErrorTimeoutResource = 0xC1, ///< Resource not available within given time: a specified resource was not available within the timeout period. + osErrorISR = 0x82, ///< Not allowed in ISR context: the function cannot be called from interrupt service routines. + osErrorISRRecursive = 0x83, ///< Function called multiple times from ISR with same object. + osErrorPriority = 0x84, ///< System cannot determine priority or thread has illegal priority. + osErrorNoMemory = 0x85, ///< System is out of memory: it was impossible to allocate or reserve memory for the operation. + osErrorValue = 0x86, ///< Value of a parameter is out of range. + osErrorOS = 0xFF, ///< Unspecified RTOS error: run-time error but no other error message fits. + osStatusReserved = 0x7FFFFFFF ///< Prevents enum down-size compiler optimization. +} osStatus; +#else +typedef int32_t osStatus; +#define osEventSignal (0x08) +#define osEventMessage (0x10) +#define osEventMail (0x20) +#define osEventTimeout (0x40) +#define osErrorOS osError +#define osErrorTimeoutResource osErrorTimeout +#define osErrorISRRecursive (-126) +#define osErrorValue (-127) +#define osErrorPriority (-128) +#endif + + +// >>> the following data type definitions may be adapted towards a specific RTOS + +/// Thread ID identifies the thread. +#if (osCMSIS < 0x20000U) +typedef void *osThreadId; +#else +#define osThreadId osThreadId_t +#endif + +/// Timer ID identifies the timer. +#if (osCMSIS < 0x20000U) +typedef void *osTimerId; +#else +#define osTimerId osTimerId_t +#endif + +/// Mutex ID identifies the mutex. +#if (osCMSIS < 0x20000U) +typedef void *osMutexId; +#else +#define osMutexId osMutexId_t +#endif + +/// Semaphore ID identifies the semaphore. +#if (osCMSIS < 0x20000U) +typedef void *osSemaphoreId; +#else +#define osSemaphoreId osSemaphoreId_t +#endif + +/// Pool ID identifies the memory pool. +typedef void *osPoolId; + +/// Message ID identifies the message queue. +typedef void *osMessageQId; + +/// Mail ID identifies the mail queue. +typedef void *osMailQId; + + +/// Thread Definition structure contains startup information of a thread. +#if (osCMSIS < 0x20000U) +typedef struct os_thread_def { + os_pthread pthread; ///< start address of thread function + osPriority tpriority; ///< initial thread priority + uint32_t instances; ///< maximum number of instances of that thread function + uint32_t stacksize; ///< stack size requirements in bytes; 0 is default stack size +} osThreadDef_t; +#else +typedef struct os_thread_def { + os_pthread pthread; ///< start address of thread function + osThreadAttr_t attr; ///< thread attributes +} osThreadDef_t; +#endif + +/// Timer Definition structure contains timer parameters. +#if (osCMSIS < 0x20000U) +typedef struct os_timer_def { + os_ptimer ptimer; ///< start address of a timer function +} osTimerDef_t; +#else +typedef struct os_timer_def { + os_ptimer ptimer; ///< start address of a timer function + osTimerAttr_t attr; ///< timer attributes +} osTimerDef_t; +#endif + +/// Mutex Definition structure contains setup information for a mutex. +#if (osCMSIS < 0x20000U) +typedef struct os_mutex_def { + uint32_t dummy; ///< dummy value +} osMutexDef_t; +#else +#define osMutexDef_t osMutexAttr_t +#endif + +/// Semaphore Definition structure contains setup information for a semaphore. +#if (osCMSIS < 0x20000U) +typedef struct os_semaphore_def { + uint32_t dummy; ///< dummy value +} osSemaphoreDef_t; +#else +#define osSemaphoreDef_t osSemaphoreAttr_t +#endif + +/// Definition structure for memory block allocation. +#if (osCMSIS < 0x20000U) +typedef struct os_pool_def { + uint32_t pool_sz; ///< number of items (elements) in the pool + uint32_t item_sz; ///< size of an item + void *pool; ///< pointer to memory for pool +} osPoolDef_t; +#else +typedef struct os_pool_def { + uint32_t pool_sz; ///< number of items (elements) in the pool + uint32_t item_sz; ///< size of an item + osMemoryPoolAttr_t attr; ///< memory pool attributes +} osPoolDef_t; +#endif + +/// Definition structure for message queue. +#if (osCMSIS < 0x20000U) +typedef struct os_messageQ_def { + uint32_t queue_sz; ///< number of elements in the queue + void *pool; ///< memory array for messages +} osMessageQDef_t; +#else +typedef struct os_messageQ_def { + uint32_t queue_sz; ///< number of elements in the queue + osMessageQueueAttr_t attr; ///< message queue attributes +} osMessageQDef_t; +#endif + +/// Definition structure for mail queue. +#if (osCMSIS < 0x20000U) +typedef struct os_mailQ_def { + uint32_t queue_sz; ///< number of elements in the queue + uint32_t item_sz; ///< size of an item + void *pool; ///< memory array for mail +} osMailQDef_t; +#else +typedef struct os_mailQ_def { + uint32_t queue_sz; ///< number of elements in the queue + uint32_t item_sz; ///< size of an item + void *mail; ///< pointer to mail + osMemoryPoolAttr_t mp_attr; ///< memory pool attributes + osMessageQueueAttr_t mq_attr; ///< message queue attributes +} osMailQDef_t; +#endif + + +/// Event structure contains detailed information about an event. +typedef struct { + osStatus status; ///< status code: event or error information + union { + uint32_t v; ///< message as 32-bit value + void *p; ///< message or mail as void pointer + int32_t signals; ///< signal flags + } value; ///< event value + union { + osMailQId mail_id; ///< mail id obtained by \ref osMailCreate + osMessageQId message_id; ///< message id obtained by \ref osMessageCreate + } def; ///< event definition +} osEvent; + + +// ==== Kernel Management Functions ==== + +/// Initialize the RTOS Kernel for creating objects. +/// \return status code that indicates the execution status of the function. +#if (osCMSIS < 0x20000U) +osStatus osKernelInitialize (void); +#endif + +/// Start the RTOS Kernel scheduler. +/// \return status code that indicates the execution status of the function. +#if (osCMSIS < 0x20000U) +osStatus osKernelStart (void); +#endif + +/// Check if the RTOS kernel is already started. +/// \return 0 RTOS is not started, 1 RTOS is started. +#if (osCMSIS < 0x20000U) +int32_t osKernelRunning(void); +#endif + +#if (defined(osFeature_SysTick) && (osFeature_SysTick != 0)) // System Timer available + +/// Get the RTOS kernel system timer counter. +/// \return RTOS kernel system timer as 32-bit value +#if (osCMSIS < 0x20000U) +uint32_t osKernelSysTick (void); +#else +#define osKernelSysTick osKernelGetSysTimerCount +#endif + +/// The RTOS kernel system timer frequency in Hz. +/// \note Reflects the system timer setting and is typically defined in a configuration file. +#if (osCMSIS < 0x20000U) +#define osKernelSysTickFrequency 100000000 +#endif + +/// Convert a microseconds value to a RTOS kernel system timer value. +/// \param microsec time value in microseconds. +/// \return time value normalized to the \ref osKernelSysTickFrequency +#if (osCMSIS < 0x20000U) +#define osKernelSysTickMicroSec(microsec) (((uint64_t)microsec * (osKernelSysTickFrequency)) / 1000000) +#else +#define osKernelSysTickMicroSec(microsec) (((uint64_t)microsec * osKernelGetSysTimerFreq()) / 1000000) +#endif + +#endif // System Timer available + + +// ==== Thread Management Functions ==== + +/// Create a Thread Definition with function, priority, and stack requirements. +/// \param name name of the thread function. +/// \param priority initial priority of the thread function. +/// \param instances number of possible thread instances. +/// \param stacksz stack size (in bytes) requirements for the thread function. +#if defined (osObjectsExternal) // object is external +#define osThreadDef(name, priority, instances, stacksz) \ +extern const osThreadDef_t os_thread_def_##name +#else // define the object +#define osThreadDef(name, priority, instances, stacksz) \ +static uint64_t os_thread_stack##name[(stacksz)?(((stacksz+7)/8)):1]; \ +static StaticTask_t os_thread_cb_##name; \ +const osThreadDef_t os_thread_def_##name = \ +{ (name), \ + { NULL, osThreadDetached, \ + (instances == 1) ? (&os_thread_cb_##name) : NULL,\ + (instances == 1) ? sizeof(StaticTask_t) : 0U, \ + ((stacksz) && (instances == 1)) ? (&os_thread_stack##name) : NULL, \ + 8*((stacksz+7)/8), \ + (priority), 0U, 0U } } +#endif + +/// Access a Thread definition. +/// \param name name of the thread definition object. +#define osThread(name) \ +&os_thread_def_##name + +/// Create a thread and add it to Active Threads and set it to state READY. +/// \param[in] thread_def thread definition referenced with \ref osThread. +/// \param[in] argument pointer that is passed to the thread function as start argument. +/// \return thread ID for reference by other functions or NULL in case of error. +osThreadId osThreadCreate (const osThreadDef_t *thread_def, void *argument); + +/// Return the thread ID of the current running thread. +/// \return thread ID for reference by other functions or NULL in case of error. +#if (osCMSIS < 0x20000U) +osThreadId osThreadGetId (void); +#endif + +/// Change priority of a thread. +/// \param[in] thread_id thread ID obtained by \ref osThreadCreate or \ref osThreadGetId. +/// \param[in] priority new priority value for the thread function. +/// \return status code that indicates the execution status of the function. +#if (osCMSIS < 0x20000U) +osStatus osThreadSetPriority (osThreadId thread_id, osPriority priority); +#endif + +/// Get current priority of a thread. +/// \param[in] thread_id thread ID obtained by \ref osThreadCreate or \ref osThreadGetId. +/// \return current priority value of the specified thread. +#if (osCMSIS < 0x20000U) +osPriority osThreadGetPriority (osThreadId thread_id); +#endif + +/// Pass control to next thread that is in state \b READY. +/// \return status code that indicates the execution status of the function. +#if (osCMSIS < 0x20000U) +osStatus osThreadYield (void); +#endif + +/// Terminate execution of a thread. +/// \param[in] thread_id thread ID obtained by \ref osThreadCreate or \ref osThreadGetId. +/// \return status code that indicates the execution status of the function. +#if (osCMSIS < 0x20000U) +osStatus osThreadTerminate (osThreadId thread_id); +#endif + + +// ==== Signal Management ==== + +/// Set the specified Signal Flags of an active thread. +/// \param[in] thread_id thread ID obtained by \ref osThreadCreate or \ref osThreadGetId. +/// \param[in] signals specifies the signal flags of the thread that should be set. +/// \return previous signal flags of the specified thread or 0x80000000 in case of incorrect parameters. +int32_t osSignalSet (osThreadId thread_id, int32_t signals); + +/// Clear the specified Signal Flags of an active thread. +/// \param[in] thread_id thread ID obtained by \ref osThreadCreate or \ref osThreadGetId. +/// \param[in] signals specifies the signal flags of the thread that shall be cleared. +/// \return previous signal flags of the specified thread or 0x80000000 in case of incorrect parameters or call from ISR. +int32_t osSignalClear (osThreadId thread_id, int32_t signals); + +/// Wait for one or more Signal Flags to become signaled for the current \b RUNNING thread. +/// \param[in] signals wait until all specified signal flags set or 0 for any single signal flag. +/// \param[in] millisec \ref CMSIS_RTOS_TimeOutValue or 0 in case of no time-out. +/// \return event flag information or error code. +os_InRegs osEvent osSignalWait (int32_t signals, uint32_t millisec); + + +// ==== Generic Wait Functions ==== + +/// Wait for Timeout (Time Delay). +/// \param[in] millisec \ref CMSIS_RTOS_TimeOutValue "time delay" value +/// \return status code that indicates the execution status of the function. +#if (osCMSIS < 0x20000U) +osStatus osDelay (uint32_t millisec); +#endif + +#if (defined (osFeature_Wait) && (osFeature_Wait != 0)) // Generic Wait available + +/// Wait for Signal, Message, Mail, or Timeout. +/// \param[in] millisec \ref CMSIS_RTOS_TimeOutValue or 0 in case of no time-out +/// \return event that contains signal, message, or mail information or error code. +os_InRegs osEvent osWait (uint32_t millisec); + +#endif // Generic Wait available + + +// ==== Timer Management Functions ==== + +/// Define a Timer object. +/// \param name name of the timer object. +/// \param function name of the timer call back function. +#if defined (osObjectsExternal) // object is external +#define osTimerDef(name, function) \ +extern const osTimerDef_t os_timer_def_##name +#else // define the object +#define osTimerDef(name, function) \ +static StaticTimer_t os_timer_cb_##name; \ +const osTimerDef_t os_timer_def_##name = \ +{ (function), { NULL, 0U, (&os_timer_cb_##name), sizeof(StaticTimer_t) } } +#endif + +/// Access a Timer definition. +/// \param name name of the timer object. +#define osTimer(name) \ +&os_timer_def_##name + +/// Create and Initialize a timer. +/// \param[in] timer_def timer object referenced with \ref osTimer. +/// \param[in] type osTimerOnce for one-shot or osTimerPeriodic for periodic behavior. +/// \param[in] argument argument to the timer call back function. +/// \return timer ID for reference by other functions or NULL in case of error. +osTimerId osTimerCreate (const osTimerDef_t *timer_def, os_timer_type type, void *argument); + +/// Start or restart a timer. +/// \param[in] timer_id timer ID obtained by \ref osTimerCreate. +/// \param[in] millisec \ref CMSIS_RTOS_TimeOutValue "time delay" value of the timer. +/// \return status code that indicates the execution status of the function. +#if (osCMSIS < 0x20000U) +osStatus osTimerStart (osTimerId timer_id, uint32_t millisec); +#endif + +/// Stop a timer. +/// \param[in] timer_id timer ID obtained by \ref osTimerCreate. +/// \return status code that indicates the execution status of the function. +#if (osCMSIS < 0x20000U) +osStatus osTimerStop (osTimerId timer_id); +#endif + +/// Delete a timer. +/// \param[in] timer_id timer ID obtained by \ref osTimerCreate. +/// \return status code that indicates the execution status of the function. +#if (osCMSIS < 0x20000U) +osStatus osTimerDelete (osTimerId timer_id); +#endif + + +// ==== Mutex Management Functions ==== + +/// Define a Mutex. +/// \param name name of the mutex object. +#if defined (osObjectsExternal) // object is external +#define osMutexDef(name) \ +extern const osMutexDef_t os_mutex_def_##name +#else // define the object +#define osMutexDef(name) \ +static StaticSemaphore_t os_mutex_cb_##name; \ +const osMutexDef_t os_mutex_def_##name = \ +{ NULL, osMutexRecursive | osMutexPrioInherit, (&os_mutex_cb_##name), sizeof(StaticSemaphore_t) } +#endif + +/// Access a Mutex definition. +/// \param name name of the mutex object. +#define osMutex(name) \ +&os_mutex_def_##name + +/// Create and Initialize a Mutex object. +/// \param[in] mutex_def mutex definition referenced with \ref osMutex. +/// \return mutex ID for reference by other functions or NULL in case of error. +osMutexId osMutexCreate (const osMutexDef_t *mutex_def); + +/// Wait until a Mutex becomes available. +/// \param[in] mutex_id mutex ID obtained by \ref osMutexCreate. +/// \param[in] millisec \ref CMSIS_RTOS_TimeOutValue or 0 in case of no time-out. +/// \return status code that indicates the execution status of the function. +#if (osCMSIS < 0x20000U) +osStatus osMutexWait (osMutexId mutex_id, uint32_t millisec); +#else +#define osMutexWait osMutexAcquire +#endif + +/// Release a Mutex that was obtained by \ref osMutexWait. +/// \param[in] mutex_id mutex ID obtained by \ref osMutexCreate. +/// \return status code that indicates the execution status of the function. +#if (osCMSIS < 0x20000U) +osStatus osMutexRelease (osMutexId mutex_id); +#endif + +/// Delete a Mutex object. +/// \param[in] mutex_id mutex ID obtained by \ref osMutexCreate. +/// \return status code that indicates the execution status of the function. +#if (osCMSIS < 0x20000U) +osStatus osMutexDelete (osMutexId mutex_id); +#endif + + +// ==== Semaphore Management Functions ==== + +#if (defined (osFeature_Semaphore) && (osFeature_Semaphore != 0U)) // Semaphore available + +/// Define a Semaphore object. +/// \param name name of the semaphore object. +#if defined (osObjectsExternal) // object is external +#define osSemaphoreDef(name) \ +extern const osSemaphoreDef_t os_semaphore_def_##name +#else // define the object +#define osSemaphoreDef(name) \ +static StaticSemaphore_t os_semaphore_cb_##name; \ +const osSemaphoreDef_t os_semaphore_def_##name = \ +{ NULL, 0U, (&os_semaphore_cb_##name), sizeof(StaticSemaphore_t) } +#endif + +/// Access a Semaphore definition. +/// \param name name of the semaphore object. +#define osSemaphore(name) \ +&os_semaphore_def_##name + +/// Create and Initialize a Semaphore object. +/// \param[in] semaphore_def semaphore definition referenced with \ref osSemaphore. +/// \param[in] count maximum and initial number of available tokens. +/// \return semaphore ID for reference by other functions or NULL in case of error. +osSemaphoreId osSemaphoreCreate (const osSemaphoreDef_t *semaphore_def, int32_t count); + +/// Wait until a Semaphore token becomes available. +/// \param[in] semaphore_id semaphore object referenced with \ref osSemaphoreCreate. +/// \param[in] millisec \ref CMSIS_RTOS_TimeOutValue or 0 in case of no time-out. +/// \return number of available tokens, or -1 in case of incorrect parameters. +int32_t osSemaphoreWait (osSemaphoreId semaphore_id, uint32_t millisec); + +/// Release a Semaphore token. +/// \param[in] semaphore_id semaphore object referenced with \ref osSemaphoreCreate. +/// \return status code that indicates the execution status of the function. +#if (osCMSIS < 0x20000U) +osStatus osSemaphoreRelease (osSemaphoreId semaphore_id); +#endif + +/// Delete a Semaphore object. +/// \param[in] semaphore_id semaphore object referenced with \ref osSemaphoreCreate. +/// \return status code that indicates the execution status of the function. +#if (osCMSIS < 0x20000U) +osStatus osSemaphoreDelete (osSemaphoreId semaphore_id); +#endif + +#endif // Semaphore available + + +// ==== Memory Pool Management Functions ==== + +#if (defined(osFeature_Pool) && (osFeature_Pool != 0)) // Memory Pool available + +/// \brief Define a Memory Pool. +/// \param name name of the memory pool. +/// \param no maximum number of blocks (objects) in the memory pool. +/// \param type data type of a single block (object). +#if defined (osObjectsExternal) // object is external +#define osPoolDef(name, no, type) \ +extern const osPoolDef_t os_pool_def_##name +#else // define the object +#define osPoolDef(name, no, type) \ +const osPoolDef_t os_pool_def_##name = \ +{ (no), sizeof(type), {NULL} } +#endif + +/// \brief Access a Memory Pool definition. +/// \param name name of the memory pool +#define osPool(name) \ +&os_pool_def_##name + +/// Create and Initialize a Memory Pool object. +/// \param[in] pool_def memory pool definition referenced with \ref osPool. +/// \return memory pool ID for reference by other functions or NULL in case of error. +osPoolId osPoolCreate (const osPoolDef_t *pool_def); + +/// Allocate a memory block from a Memory Pool. +/// \param[in] pool_id memory pool ID obtain referenced with \ref osPoolCreate. +/// \return address of the allocated memory block or NULL in case of no memory available. +void *osPoolAlloc (osPoolId pool_id); + +/// Allocate a memory block from a Memory Pool and set memory block to zero. +/// \param[in] pool_id memory pool ID obtain referenced with \ref osPoolCreate. +/// \return address of the allocated memory block or NULL in case of no memory available. +void *osPoolCAlloc (osPoolId pool_id); + +/// Return an allocated memory block back to a Memory Pool. +/// \param[in] pool_id memory pool ID obtain referenced with \ref osPoolCreate. +/// \param[in] block address of the allocated memory block to be returned to the memory pool. +/// \return status code that indicates the execution status of the function. +osStatus osPoolFree (osPoolId pool_id, void *block); + +#endif // Memory Pool available + + +// ==== Message Queue Management Functions ==== + +#if (defined(osFeature_MessageQ) && (osFeature_MessageQ != 0)) // Message Queue available + +/// \brief Create a Message Queue Definition. +/// \param name name of the queue. +/// \param queue_sz maximum number of messages in the queue. +/// \param type data type of a single message element (for debugger). +#if defined (osObjectsExternal) // object is external +#define osMessageQDef(name, queue_sz, type) \ +extern const osMessageQDef_t os_messageQ_def_##name +#else // define the object +#define osMessageQDef(name, queue_sz, type) \ +static StaticQueue_t os_mq_cb_##name; \ +static uint32_t os_mq_data_##name[(queue_sz) * sizeof(type)]; \ +const osMessageQDef_t os_messageQ_def_##name = \ +{ (queue_sz), \ + { NULL, 0U, (&os_mq_cb_##name), sizeof(StaticQueue_t), \ + (&os_mq_data_##name), sizeof(os_mq_data_##name) } } +#endif + +/// \brief Access a Message Queue Definition. +/// \param name name of the queue +#define osMessageQ(name) \ +&os_messageQ_def_##name + +/// Create and Initialize a Message Queue object. +/// \param[in] queue_def message queue definition referenced with \ref osMessageQ. +/// \param[in] thread_id thread ID (obtained by \ref osThreadCreate or \ref osThreadGetId) or NULL. +/// \return message queue ID for reference by other functions or NULL in case of error. +osMessageQId osMessageCreate (const osMessageQDef_t *queue_def, osThreadId thread_id); + +/// Put a Message to a Queue. +/// \param[in] queue_id message queue ID obtained with \ref osMessageCreate. +/// \param[in] info message information. +/// \param[in] millisec \ref CMSIS_RTOS_TimeOutValue or 0 in case of no time-out. +/// \return status code that indicates the execution status of the function. +osStatus osMessagePut (osMessageQId queue_id, uint32_t info, uint32_t millisec); + +/// Get a Message from a Queue or timeout if Queue is empty. +/// \param[in] queue_id message queue ID obtained with \ref osMessageCreate. +/// \param[in] millisec \ref CMSIS_RTOS_TimeOutValue or 0 in case of no time-out. +/// \return event information that includes status code. +os_InRegs osEvent osMessageGet (osMessageQId queue_id, uint32_t millisec); + +#endif // Message Queue available + + +// ==== Mail Queue Management Functions ==== + +#if (defined(osFeature_MailQ) && (osFeature_MailQ != 0)) // Mail Queue available + +/// \brief Create a Mail Queue Definition. +/// \param name name of the queue. +/// \param queue_sz maximum number of mails in the queue. +/// \param type data type of a single mail element. +#if defined (osObjectsExternal) // object is external +#define osMailQDef(name, queue_sz, type) \ +extern const osMailQDef_t os_mailQ_def_##name +#else // define the object +#define osMailQDef(name, queue_sz, type) \ +const osMailQDef_t os_mailQ_def_##name = \ +{ (queue_sz), sizeof(type), NULL } +#endif + +/// \brief Access a Mail Queue Definition. +/// \param name name of the queue +#define osMailQ(name) \ +&os_mailQ_def_##name + +/// Create and Initialize a Mail Queue object. +/// \param[in] queue_def mail queue definition referenced with \ref osMailQ. +/// \param[in] thread_id thread ID (obtained by \ref osThreadCreate or \ref osThreadGetId) or NULL. +/// \return mail queue ID for reference by other functions or NULL in case of error. +osMailQId osMailCreate (const osMailQDef_t *queue_def, osThreadId thread_id); + +/// Allocate a memory block for mail from a mail memory pool. +/// \param[in] queue_id mail queue ID obtained with \ref osMailCreate. +/// \param[in] millisec \ref CMSIS_RTOS_TimeOutValue or 0 in case of no time-out +/// \return pointer to memory block that can be filled with mail or NULL in case of error. +void *osMailAlloc (osMailQId queue_id, uint32_t millisec); + +/// Allocate a memory block for mail from a mail memory pool and set memory block to zero. +/// \param[in] queue_id mail queue ID obtained with \ref osMailCreate. +/// \param[in] millisec \ref CMSIS_RTOS_TimeOutValue or 0 in case of no time-out +/// \return pointer to memory block that can be filled with mail or NULL in case of error. +void *osMailCAlloc (osMailQId queue_id, uint32_t millisec); + +/// Put a Mail into a Queue. +/// \param[in] queue_id mail queue ID obtained with \ref osMailCreate. +/// \param[in] mail pointer to memory with mail to put into a queue. +/// \return status code that indicates the execution status of the function. +osStatus osMailPut (osMailQId queue_id, const void *mail); + +/// Get a Mail from a Queue or timeout if Queue is empty. +/// \param[in] queue_id mail queue ID obtained with \ref osMailCreate. +/// \param[in] millisec \ref CMSIS_RTOS_TimeOutValue or 0 in case of no time-out. +/// \return event information that includes status code. +os_InRegs osEvent osMailGet (osMailQId queue_id, uint32_t millisec); + +/// Free a memory block by returning it to a mail memory pool. +/// \param[in] queue_id mail queue ID obtained with \ref osMailCreate. +/// \param[in] mail pointer to memory block that was obtained with \ref osMailGet. +/// \return status code that indicates the execution status of the function. +osStatus osMailFree (osMailQId queue_id, void *mail); + +#endif // Mail Queue available + + +#ifdef __cplusplus +} +#endif + +#endif // CMSIS_OS_H_ diff --git a/RTOS_Dual_Sensor_Single_Board_Testing/Middlewares/Third_Party/FreeRTOS/Source/CMSIS_RTOS_V2/cmsis_os2.c b/RTOS_Dual_Sensor_Single_Board_Testing/Middlewares/Third_Party/FreeRTOS/Source/CMSIS_RTOS_V2/cmsis_os2.c new file mode 100644 index 0000000..69ac328 --- /dev/null +++ b/RTOS_Dual_Sensor_Single_Board_Testing/Middlewares/Third_Party/FreeRTOS/Source/CMSIS_RTOS_V2/cmsis_os2.c @@ -0,0 +1,2482 @@ +/* -------------------------------------------------------------------------- + * Copyright (c) 2013-2020 Arm Limited. All rights reserved. + * + * SPDX-License-Identifier: Apache-2.0 + * + * Licensed under the Apache License, Version 2.0 (the License); you may + * not use this file except in compliance with the License. + * You may obtain a copy of the License at + * + * www.apache.org/licenses/LICENSE-2.0 + * + * Unless required by applicable law or agreed to in writing, software + * distributed under the License is distributed on an AS IS BASIS, WITHOUT + * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + * See the License for the specific language governing permissions and + * limitations under the License. + * + * Name: cmsis_os2.c + * Purpose: CMSIS RTOS2 wrapper for FreeRTOS + * + *---------------------------------------------------------------------------*/ + +#include + +#include "cmsis_os2.h" // ::CMSIS:RTOS2 +#include "cmsis_compiler.h" // Compiler agnostic definitions + +#include "FreeRTOS.h" // ARM.FreeRTOS::RTOS:Core +#include "task.h" // ARM.FreeRTOS::RTOS:Core +#include "event_groups.h" // ARM.FreeRTOS::RTOS:Event Groups +#include "semphr.h" // ARM.FreeRTOS::RTOS:Core + +#include "freertos_mpool.h" // osMemoryPool definitions +#include "freertos_os2.h" // Configuration check and setup + +/*---------------------------------------------------------------------------*/ +#ifndef __ARM_ARCH_6M__ + #define __ARM_ARCH_6M__ 0 +#endif +#ifndef __ARM_ARCH_7M__ + #define __ARM_ARCH_7M__ 0 +#endif +#ifndef __ARM_ARCH_7EM__ + #define __ARM_ARCH_7EM__ 0 +#endif +#ifndef __ARM_ARCH_8M_MAIN__ + #define __ARM_ARCH_8M_MAIN__ 0 +#endif +#ifndef __ARM_ARCH_7A__ + #define __ARM_ARCH_7A__ 0 +#endif + +#if ((__ARM_ARCH_7M__ == 1U) || \ + (__ARM_ARCH_7EM__ == 1U) || \ + (__ARM_ARCH_8M_MAIN__ == 1U)) +#define IS_IRQ_MASKED() ((__get_PRIMASK() != 0U) || (__get_BASEPRI() != 0U)) +#elif (__ARM_ARCH_6M__ == 1U) +#define IS_IRQ_MASKED() (__get_PRIMASK() != 0U) +#elif (__ARM_ARCH_7A__ == 1U) +/* CPSR mask bits */ +#define CPSR_MASKBIT_I 0x80U + +#define IS_IRQ_MASKED() ((__get_CPSR() & CPSR_MASKBIT_I) != 0U) +#else +#define IS_IRQ_MASKED() (__get_PRIMASK() != 0U) +#endif + +#if (__ARM_ARCH_7A__ == 1U) +/* CPSR mode bitmasks */ +#define CPSR_MODE_USER 0x10U +#define CPSR_MODE_SYSTEM 0x1FU + +#define IS_IRQ_MODE() ((__get_mode() != CPSR_MODE_USER) && (__get_mode() != CPSR_MODE_SYSTEM)) +#else +#define IS_IRQ_MODE() (__get_IPSR() != 0U) +#endif + +#define IS_IRQ() IS_IRQ_MODE() + +#define SVCall_IRQ_NBR (IRQn_Type) -5 /* SVCall_IRQ_NBR added as SV_Call handler name is not the same for CM0 and for all other CMx */ + +/* Limits */ +#define MAX_BITS_TASK_NOTIFY 31U +#define MAX_BITS_EVENT_GROUPS 24U + +#define THREAD_FLAGS_INVALID_BITS (~((1UL << MAX_BITS_TASK_NOTIFY) - 1U)) +#define EVENT_FLAGS_INVALID_BITS (~((1UL << MAX_BITS_EVENT_GROUPS) - 1U)) + +/* Kernel version and identification string definition (major.minor.rev: mmnnnrrrr dec) */ +#define KERNEL_VERSION (((uint32_t)tskKERNEL_VERSION_MAJOR * 10000000UL) | \ + ((uint32_t)tskKERNEL_VERSION_MINOR * 10000UL) | \ + ((uint32_t)tskKERNEL_VERSION_BUILD * 1UL)) + +#define KERNEL_ID ("FreeRTOS " tskKERNEL_VERSION_NUMBER) + +/* Timer callback information structure definition */ +typedef struct { + osTimerFunc_t func; + void *arg; +} TimerCallback_t; + +/* Kernel initialization state */ +static osKernelState_t KernelState = osKernelInactive; + +/* + Heap region definition used by heap_5 variant + + Define configAPPLICATION_ALLOCATED_HEAP as nonzero value in FreeRTOSConfig.h if + heap regions are already defined and vPortDefineHeapRegions is called in application. + + Otherwise vPortDefineHeapRegions will be called by osKernelInitialize using + definition configHEAP_5_REGIONS as parameter. Overriding configHEAP_5_REGIONS + is possible by defining it globally or in FreeRTOSConfig.h. +*/ +#if defined(USE_FreeRTOS_HEAP_5) +#if (configAPPLICATION_ALLOCATED_HEAP == 0) + /* + FreeRTOS heap is not defined by the application. + Single region of size configTOTAL_HEAP_SIZE (defined in FreeRTOSConfig.h) + is provided by default. Define configHEAP_5_REGIONS to provide custom + HeapRegion_t array. + */ + #define HEAP_5_REGION_SETUP 1 + + #ifndef configHEAP_5_REGIONS + #define configHEAP_5_REGIONS xHeapRegions + + static uint8_t ucHeap[configTOTAL_HEAP_SIZE]; + + static HeapRegion_t xHeapRegions[] = { + { ucHeap, configTOTAL_HEAP_SIZE }, + { NULL, 0 } + }; + #else + /* Global definition is provided to override default heap array */ + extern HeapRegion_t configHEAP_5_REGIONS[]; + #endif +#else + /* + The application already defined the array used for the FreeRTOS heap and + called vPortDefineHeapRegions to initialize heap. + */ + #define HEAP_5_REGION_SETUP 0 +#endif /* configAPPLICATION_ALLOCATED_HEAP */ +#endif /* USE_FreeRTOS_HEAP_5 */ + +#if defined(SysTick) +#undef SysTick_Handler + +/* CMSIS SysTick interrupt handler prototype */ +extern void SysTick_Handler (void); +/* FreeRTOS tick timer interrupt handler prototype */ +extern void xPortSysTickHandler (void); + +/* + SysTick handler implementation that also clears overflow flag. +*/ +#if (USE_CUSTOM_SYSTICK_HANDLER_IMPLEMENTATION == 0) +void SysTick_Handler (void) { + /* Clear overflow flag */ + SysTick->CTRL; + + if (xTaskGetSchedulerState() != taskSCHEDULER_NOT_STARTED) { + /* Call tick handler */ + xPortSysTickHandler(); + } +} +#endif +#endif /* SysTick */ + +/* + Setup SVC to reset value. +*/ +__STATIC_INLINE void SVC_Setup (void) { +#if (__ARM_ARCH_7A__ == 0U) + /* Service Call interrupt might be configured before kernel start */ + /* and when its priority is lower or equal to BASEPRI, svc intruction */ + /* causes a Hard Fault. */ + NVIC_SetPriority (SVCall_IRQ_NBR, 0U); +#endif +} + +/* + Function macro used to retrieve semaphore count from ISR +*/ +#ifndef uxSemaphoreGetCountFromISR +#define uxSemaphoreGetCountFromISR( xSemaphore ) uxQueueMessagesWaitingFromISR( ( QueueHandle_t ) ( xSemaphore ) ) +#endif + +/* Get OS Tick count value */ +static uint32_t OS_Tick_GetCount (void); +/* Get OS Tick overflow status */ +static uint32_t OS_Tick_GetOverflow (void); +/* Get OS Tick interval */ +static uint32_t OS_Tick_GetInterval (void); +/*---------------------------------------------------------------------------*/ + +osStatus_t osKernelInitialize (void) { + osStatus_t stat; + + if (IS_IRQ()) { + stat = osErrorISR; + } + else { + if (KernelState == osKernelInactive) { + #if defined(USE_TRACE_EVENT_RECORDER) + EvrFreeRTOSSetup(0U); + #endif + #if defined(USE_FreeRTOS_HEAP_5) && (HEAP_5_REGION_SETUP == 1) + vPortDefineHeapRegions (configHEAP_5_REGIONS); + #endif + KernelState = osKernelReady; + stat = osOK; + } else { + stat = osError; + } + } + + return (stat); +} + +osStatus_t osKernelGetInfo (osVersion_t *version, char *id_buf, uint32_t id_size) { + + if (version != NULL) { + /* Version encoding is major.minor.rev: mmnnnrrrr dec */ + version->api = KERNEL_VERSION; + version->kernel = KERNEL_VERSION; + } + + if ((id_buf != NULL) && (id_size != 0U)) { + if (id_size > sizeof(KERNEL_ID)) { + id_size = sizeof(KERNEL_ID); + } + memcpy(id_buf, KERNEL_ID, id_size); + } + + return (osOK); +} + +osKernelState_t osKernelGetState (void) { + osKernelState_t state; + + switch (xTaskGetSchedulerState()) { + case taskSCHEDULER_RUNNING: + state = osKernelRunning; + break; + + case taskSCHEDULER_SUSPENDED: + state = osKernelLocked; + break; + + case taskSCHEDULER_NOT_STARTED: + default: + if (KernelState == osKernelReady) { + state = osKernelReady; + } else { + state = osKernelInactive; + } + break; + } + + return (state); +} + +osStatus_t osKernelStart (void) { + osStatus_t stat; + + if (IS_IRQ()) { + stat = osErrorISR; + } + else { + if (KernelState == osKernelReady) { + /* Ensure SVC priority is at the reset value */ + SVC_Setup(); + /* Change state to enable IRQ masking check */ + KernelState = osKernelRunning; + /* Start the kernel scheduler */ + vTaskStartScheduler(); + stat = osOK; + } else { + stat = osError; + } + } + + return (stat); +} + +int32_t osKernelLock (void) { + int32_t lock; + + if (IS_IRQ()) { + lock = (int32_t)osErrorISR; + } + else { + switch (xTaskGetSchedulerState()) { + case taskSCHEDULER_SUSPENDED: + lock = 1; + break; + + case taskSCHEDULER_RUNNING: + vTaskSuspendAll(); + lock = 0; + break; + + case taskSCHEDULER_NOT_STARTED: + default: + lock = (int32_t)osError; + break; + } + } + + return (lock); +} + +int32_t osKernelUnlock (void) { + int32_t lock; + + if (IS_IRQ()) { + lock = (int32_t)osErrorISR; + } + else { + switch (xTaskGetSchedulerState()) { + case taskSCHEDULER_SUSPENDED: + lock = 1; + + if (xTaskResumeAll() != pdTRUE) { + if (xTaskGetSchedulerState() == taskSCHEDULER_SUSPENDED) { + lock = (int32_t)osError; + } + } + break; + + case taskSCHEDULER_RUNNING: + lock = 0; + break; + + case taskSCHEDULER_NOT_STARTED: + default: + lock = (int32_t)osError; + break; + } + } + + return (lock); +} + +int32_t osKernelRestoreLock (int32_t lock) { + + if (IS_IRQ()) { + lock = (int32_t)osErrorISR; + } + else { + switch (xTaskGetSchedulerState()) { + case taskSCHEDULER_SUSPENDED: + case taskSCHEDULER_RUNNING: + if (lock == 1) { + vTaskSuspendAll(); + } + else { + if (lock != 0) { + lock = (int32_t)osError; + } + else { + if (xTaskResumeAll() != pdTRUE) { + if (xTaskGetSchedulerState() != taskSCHEDULER_RUNNING) { + lock = (int32_t)osError; + } + } + } + } + break; + + case taskSCHEDULER_NOT_STARTED: + default: + lock = (int32_t)osError; + break; + } + } + + return (lock); +} + +uint32_t osKernelGetTickCount (void) { + TickType_t ticks; + + if (IS_IRQ()) { + ticks = xTaskGetTickCountFromISR(); + } else { + ticks = xTaskGetTickCount(); + } + + return (ticks); +} + +uint32_t osKernelGetTickFreq (void) { + return (configTICK_RATE_HZ); +} + +/* Get OS Tick count value */ +static uint32_t OS_Tick_GetCount (void) { + uint32_t load = SysTick->LOAD; + return (load - SysTick->VAL); +} + +/* Get OS Tick overflow status */ +static uint32_t OS_Tick_GetOverflow (void) { + return ((SysTick->CTRL >> 16) & 1U); +} + +/* Get OS Tick interval */ +static uint32_t OS_Tick_GetInterval (void) { + return (SysTick->LOAD + 1U); +} + +uint32_t osKernelGetSysTimerCount (void) { + uint32_t irqmask = IS_IRQ_MASKED(); + TickType_t ticks; + uint32_t val; + + __disable_irq(); + + ticks = xTaskGetTickCount(); + val = OS_Tick_GetCount(); + + if (OS_Tick_GetOverflow() != 0U) { + val = OS_Tick_GetCount(); + ticks++; + } + val += ticks * OS_Tick_GetInterval(); + + if (irqmask == 0U) { + __enable_irq(); + } + + return (val); +} + +uint32_t osKernelGetSysTimerFreq (void) { + return (configCPU_CLOCK_HZ); +} + +/*---------------------------------------------------------------------------*/ + +osThreadId_t osThreadNew (osThreadFunc_t func, void *argument, const osThreadAttr_t *attr) { + const char *name; + uint32_t stack; + TaskHandle_t hTask; + UBaseType_t prio; + int32_t mem; + + hTask = NULL; + + if (!IS_IRQ() && (func != NULL)) { + stack = configMINIMAL_STACK_SIZE; + prio = (UBaseType_t)osPriorityNormal; + + name = NULL; + mem = -1; + + if (attr != NULL) { + if (attr->name != NULL) { + name = attr->name; + } + if (attr->priority != osPriorityNone) { + prio = (UBaseType_t)attr->priority; + } + + if ((prio < osPriorityIdle) || (prio > osPriorityISR) || ((attr->attr_bits & osThreadJoinable) == osThreadJoinable)) { + return (NULL); + } + + if (attr->stack_size > 0U) { + /* In FreeRTOS stack is not in bytes, but in sizeof(StackType_t) which is 4 on ARM ports. */ + /* Stack size should be therefore 4 byte aligned in order to avoid division caused side effects */ + stack = attr->stack_size / sizeof(StackType_t); + } + + if ((attr->cb_mem != NULL) && (attr->cb_size >= sizeof(StaticTask_t)) && + (attr->stack_mem != NULL) && (attr->stack_size > 0U)) { + mem = 1; + } + else { + if ((attr->cb_mem == NULL) && (attr->cb_size == 0U) && (attr->stack_mem == NULL)) { + mem = 0; + } + } + } + else { + mem = 0; + } + + if (mem == 1) { + #if (configSUPPORT_STATIC_ALLOCATION == 1) + hTask = xTaskCreateStatic ((TaskFunction_t)func, name, stack, argument, prio, (StackType_t *)attr->stack_mem, + (StaticTask_t *)attr->cb_mem); + #endif + } + else { + if (mem == 0) { + #if (configSUPPORT_DYNAMIC_ALLOCATION == 1) + if (xTaskCreate ((TaskFunction_t)func, name, (uint16_t)stack, argument, prio, &hTask) != pdPASS) { + hTask = NULL; + } + #endif + } + } + } + + return ((osThreadId_t)hTask); +} + +const char *osThreadGetName (osThreadId_t thread_id) { + TaskHandle_t hTask = (TaskHandle_t)thread_id; + const char *name; + + if (IS_IRQ() || (hTask == NULL)) { + name = NULL; + } else { + name = pcTaskGetName (hTask); + } + + return (name); +} + +osThreadId_t osThreadGetId (void) { + osThreadId_t id; + + id = (osThreadId_t)xTaskGetCurrentTaskHandle(); + + return (id); +} + +osThreadState_t osThreadGetState (osThreadId_t thread_id) { + TaskHandle_t hTask = (TaskHandle_t)thread_id; + osThreadState_t state; + + if (IS_IRQ() || (hTask == NULL)) { + state = osThreadError; + } + else { + switch (eTaskGetState (hTask)) { + case eRunning: state = osThreadRunning; break; + case eReady: state = osThreadReady; break; + case eBlocked: + case eSuspended: state = osThreadBlocked; break; + case eDeleted: state = osThreadTerminated; break; + case eInvalid: + default: state = osThreadError; break; + } + } + + return (state); +} + +uint32_t osThreadGetStackSpace (osThreadId_t thread_id) { + TaskHandle_t hTask = (TaskHandle_t)thread_id; + uint32_t sz; + + if (IS_IRQ() || (hTask == NULL)) { + sz = 0U; + } else { + sz = (uint32_t)(uxTaskGetStackHighWaterMark(hTask) * sizeof(StackType_t)); + } + + return (sz); +} + +osStatus_t osThreadSetPriority (osThreadId_t thread_id, osPriority_t priority) { + TaskHandle_t hTask = (TaskHandle_t)thread_id; + osStatus_t stat; + + if (IS_IRQ()) { + stat = osErrorISR; + } + else if ((hTask == NULL) || (priority < osPriorityIdle) || (priority > osPriorityISR)) { + stat = osErrorParameter; + } + else { + stat = osOK; + vTaskPrioritySet (hTask, (UBaseType_t)priority); + } + + return (stat); +} + +osPriority_t osThreadGetPriority (osThreadId_t thread_id) { + TaskHandle_t hTask = (TaskHandle_t)thread_id; + osPriority_t prio; + + if (IS_IRQ() || (hTask == NULL)) { + prio = osPriorityError; + } else { + prio = (osPriority_t)((int32_t)uxTaskPriorityGet (hTask)); + } + + return (prio); +} + +osStatus_t osThreadYield (void) { + osStatus_t stat; + + if (IS_IRQ()) { + stat = osErrorISR; + } else { + stat = osOK; + taskYIELD(); + } + + return (stat); +} + +#if (configUSE_OS2_THREAD_SUSPEND_RESUME == 1) +osStatus_t osThreadSuspend (osThreadId_t thread_id) { + TaskHandle_t hTask = (TaskHandle_t)thread_id; + osStatus_t stat; + + if (IS_IRQ()) { + stat = osErrorISR; + } + else if (hTask == NULL) { + stat = osErrorParameter; + } + else { + stat = osOK; + vTaskSuspend (hTask); + } + + return (stat); +} + +osStatus_t osThreadResume (osThreadId_t thread_id) { + TaskHandle_t hTask = (TaskHandle_t)thread_id; + osStatus_t stat; + + if (IS_IRQ()) { + stat = osErrorISR; + } + else if (hTask == NULL) { + stat = osErrorParameter; + } + else { + stat = osOK; + vTaskResume (hTask); + } + + return (stat); +} +#endif /* (configUSE_OS2_THREAD_SUSPEND_RESUME == 1) */ + +__NO_RETURN void osThreadExit (void) { +#ifndef USE_FreeRTOS_HEAP_1 + vTaskDelete (NULL); +#endif + for (;;); +} + +osStatus_t osThreadTerminate (osThreadId_t thread_id) { + TaskHandle_t hTask = (TaskHandle_t)thread_id; + osStatus_t stat; +#ifndef USE_FreeRTOS_HEAP_1 + eTaskState tstate; + + if (IS_IRQ()) { + stat = osErrorISR; + } + else if (hTask == NULL) { + stat = osErrorParameter; + } + else { + tstate = eTaskGetState (hTask); + + if (tstate != eDeleted) { + stat = osOK; + vTaskDelete (hTask); + } else { + stat = osErrorResource; + } + } +#else + stat = osError; +#endif + + return (stat); +} + +uint32_t osThreadGetCount (void) { + uint32_t count; + + if (IS_IRQ()) { + count = 0U; + } else { + count = uxTaskGetNumberOfTasks(); + } + + return (count); +} + +#if (configUSE_OS2_THREAD_ENUMERATE == 1) +uint32_t osThreadEnumerate (osThreadId_t *thread_array, uint32_t array_items) { + uint32_t i, count; + TaskStatus_t *task; + + if (IS_IRQ() || (thread_array == NULL) || (array_items == 0U)) { + count = 0U; + } else { + vTaskSuspendAll(); + + count = uxTaskGetNumberOfTasks(); + task = pvPortMalloc (count * sizeof(TaskStatus_t)); + + if (task != NULL) { + count = uxTaskGetSystemState (task, count, NULL); + + for (i = 0U; (i < count) && (i < array_items); i++) { + thread_array[i] = (osThreadId_t)task[i].xHandle; + } + count = i; + } + (void)xTaskResumeAll(); + + vPortFree (task); + } + + return (count); +} +#endif /* (configUSE_OS2_THREAD_ENUMERATE == 1) */ + +#if (configUSE_OS2_THREAD_FLAGS == 1) +uint32_t osThreadFlagsSet (osThreadId_t thread_id, uint32_t flags) { + TaskHandle_t hTask = (TaskHandle_t)thread_id; + uint32_t rflags; + BaseType_t yield; + + if ((hTask == NULL) || ((flags & THREAD_FLAGS_INVALID_BITS) != 0U)) { + rflags = (uint32_t)osErrorParameter; + } + else { + rflags = (uint32_t)osError; + + if (IS_IRQ()) { + yield = pdFALSE; + + (void)xTaskNotifyFromISR (hTask, flags, eSetBits, &yield); + (void)xTaskNotifyAndQueryFromISR (hTask, 0, eNoAction, &rflags, NULL); + + portYIELD_FROM_ISR (yield); + } + else { + (void)xTaskNotify (hTask, flags, eSetBits); + (void)xTaskNotifyAndQuery (hTask, 0, eNoAction, &rflags); + } + } + /* Return flags after setting */ + return (rflags); +} + +uint32_t osThreadFlagsClear (uint32_t flags) { + TaskHandle_t hTask; + uint32_t rflags, cflags; + + if (IS_IRQ()) { + rflags = (uint32_t)osErrorISR; + } + else if ((flags & THREAD_FLAGS_INVALID_BITS) != 0U) { + rflags = (uint32_t)osErrorParameter; + } + else { + hTask = xTaskGetCurrentTaskHandle(); + + if (xTaskNotifyAndQuery (hTask, 0, eNoAction, &cflags) == pdPASS) { + rflags = cflags; + cflags &= ~flags; + + if (xTaskNotify (hTask, cflags, eSetValueWithOverwrite) != pdPASS) { + rflags = (uint32_t)osError; + } + } + else { + rflags = (uint32_t)osError; + } + } + + /* Return flags before clearing */ + return (rflags); +} + +uint32_t osThreadFlagsGet (void) { + TaskHandle_t hTask; + uint32_t rflags; + + if (IS_IRQ()) { + rflags = (uint32_t)osErrorISR; + } + else { + hTask = xTaskGetCurrentTaskHandle(); + + if (xTaskNotifyAndQuery (hTask, 0, eNoAction, &rflags) != pdPASS) { + rflags = (uint32_t)osError; + } + } + + return (rflags); +} + +uint32_t osThreadFlagsWait (uint32_t flags, uint32_t options, uint32_t timeout) { + uint32_t rflags, nval; + uint32_t clear; + TickType_t t0, td, tout; + BaseType_t rval; + + if (IS_IRQ()) { + rflags = (uint32_t)osErrorISR; + } + else if ((flags & THREAD_FLAGS_INVALID_BITS) != 0U) { + rflags = (uint32_t)osErrorParameter; + } + else { + if ((options & osFlagsNoClear) == osFlagsNoClear) { + clear = 0U; + } else { + clear = flags; + } + + rflags = 0U; + tout = timeout; + + t0 = xTaskGetTickCount(); + do { + rval = xTaskNotifyWait (0, clear, &nval, tout); + + if (rval == pdPASS) { + rflags &= flags; + rflags |= nval; + + if ((options & osFlagsWaitAll) == osFlagsWaitAll) { + if ((flags & rflags) == flags) { + break; + } else { + if (timeout == 0U) { + rflags = (uint32_t)osErrorResource; + break; + } + } + } + else { + if ((flags & rflags) != 0) { + break; + } else { + if (timeout == 0U) { + rflags = (uint32_t)osErrorResource; + break; + } + } + } + + /* Update timeout */ + td = xTaskGetTickCount() - t0; + + if (td > tout) { + tout = 0; + } else { + tout -= td; + } + } + else { + if (timeout == 0) { + rflags = (uint32_t)osErrorResource; + } else { + rflags = (uint32_t)osErrorTimeout; + } + } + } + while (rval != pdFAIL); + } + + /* Return flags before clearing */ + return (rflags); +} +#endif /* (configUSE_OS2_THREAD_FLAGS == 1) */ + +osStatus_t osDelay (uint32_t ticks) { + osStatus_t stat; + + if (IS_IRQ()) { + stat = osErrorISR; + } + else { + stat = osOK; + + if (ticks != 0U) { + vTaskDelay(ticks); + } + } + + return (stat); +} + +osStatus_t osDelayUntil (uint32_t ticks) { + TickType_t tcnt, delay; + osStatus_t stat; + + if (IS_IRQ()) { + stat = osErrorISR; + } + else { + stat = osOK; + tcnt = xTaskGetTickCount(); + + /* Determine remaining number of ticks to delay */ + delay = (TickType_t)ticks - tcnt; + + /* Check if target tick has not expired */ + if((delay != 0U) && (0 == (delay >> (8 * sizeof(TickType_t) - 1)))) { + vTaskDelayUntil (&tcnt, delay); + } + else + { + /* No delay or already expired */ + stat = osErrorParameter; + } + } + + return (stat); +} + +/*---------------------------------------------------------------------------*/ +#if (configUSE_OS2_TIMER == 1) + +static void TimerCallback (TimerHandle_t hTimer) { + TimerCallback_t *callb; + + callb = (TimerCallback_t *)pvTimerGetTimerID (hTimer); + + if (callb != NULL) { + callb->func (callb->arg); + } +} + +osTimerId_t osTimerNew (osTimerFunc_t func, osTimerType_t type, void *argument, const osTimerAttr_t *attr) { + const char *name; + TimerHandle_t hTimer; + TimerCallback_t *callb; + UBaseType_t reload; + int32_t mem; + + hTimer = NULL; + + if (!IS_IRQ() && (func != NULL)) { + /* Allocate memory to store callback function and argument */ + callb = pvPortMalloc (sizeof(TimerCallback_t)); + + if (callb != NULL) { + callb->func = func; + callb->arg = argument; + + if (type == osTimerOnce) { + reload = pdFALSE; + } else { + reload = pdTRUE; + } + + mem = -1; + name = NULL; + + if (attr != NULL) { + if (attr->name != NULL) { + name = attr->name; + } + + if ((attr->cb_mem != NULL) && (attr->cb_size >= sizeof(StaticTimer_t))) { + mem = 1; + } + else { + if ((attr->cb_mem == NULL) && (attr->cb_size == 0U)) { + mem = 0; + } + } + } + else { + mem = 0; + } + + if (mem == 1) { + #if (configSUPPORT_STATIC_ALLOCATION == 1) + hTimer = xTimerCreateStatic (name, 1, reload, callb, TimerCallback, (StaticTimer_t *)attr->cb_mem); + #endif + } + else { + if (mem == 0) { + #if (configSUPPORT_DYNAMIC_ALLOCATION == 1) + hTimer = xTimerCreate (name, 1, reload, callb, TimerCallback); + #endif + } + } + + if ((hTimer == NULL) && (callb != NULL)) { + vPortFree (callb); + } + } + } + + return ((osTimerId_t)hTimer); +} + +const char *osTimerGetName (osTimerId_t timer_id) { + TimerHandle_t hTimer = (TimerHandle_t)timer_id; + const char *p; + + if (IS_IRQ() || (hTimer == NULL)) { + p = NULL; + } else { + p = pcTimerGetName (hTimer); + } + + return (p); +} + +osStatus_t osTimerStart (osTimerId_t timer_id, uint32_t ticks) { + TimerHandle_t hTimer = (TimerHandle_t)timer_id; + osStatus_t stat; + + if (IS_IRQ()) { + stat = osErrorISR; + } + else if (hTimer == NULL) { + stat = osErrorParameter; + } + else { + if (xTimerChangePeriod (hTimer, ticks, 0) == pdPASS) { + stat = osOK; + } else { + stat = osErrorResource; + } + } + + return (stat); +} + +osStatus_t osTimerStop (osTimerId_t timer_id) { + TimerHandle_t hTimer = (TimerHandle_t)timer_id; + osStatus_t stat; + + if (IS_IRQ()) { + stat = osErrorISR; + } + else if (hTimer == NULL) { + stat = osErrorParameter; + } + else { + if (xTimerIsTimerActive (hTimer) == pdFALSE) { + stat = osErrorResource; + } + else { + if (xTimerStop (hTimer, 0) == pdPASS) { + stat = osOK; + } else { + stat = osError; + } + } + } + + return (stat); +} + +uint32_t osTimerIsRunning (osTimerId_t timer_id) { + TimerHandle_t hTimer = (TimerHandle_t)timer_id; + uint32_t running; + + if (IS_IRQ() || (hTimer == NULL)) { + running = 0U; + } else { + running = (uint32_t)xTimerIsTimerActive (hTimer); + } + + return (running); +} + +osStatus_t osTimerDelete (osTimerId_t timer_id) { + TimerHandle_t hTimer = (TimerHandle_t)timer_id; + osStatus_t stat; +#ifndef USE_FreeRTOS_HEAP_1 + TimerCallback_t *callb; + + if (IS_IRQ()) { + stat = osErrorISR; + } + else if (hTimer == NULL) { + stat = osErrorParameter; + } + else { + callb = (TimerCallback_t *)pvTimerGetTimerID (hTimer); + + if (xTimerDelete (hTimer, 0) == pdPASS) { + vPortFree (callb); + stat = osOK; + } else { + stat = osErrorResource; + } + } +#else + stat = osError; +#endif + + return (stat); +} +#endif /* (configUSE_OS2_TIMER == 1) */ + +/*---------------------------------------------------------------------------*/ + +osEventFlagsId_t osEventFlagsNew (const osEventFlagsAttr_t *attr) { + EventGroupHandle_t hEventGroup; + int32_t mem; + + hEventGroup = NULL; + + if (!IS_IRQ()) { + mem = -1; + + if (attr != NULL) { + if ((attr->cb_mem != NULL) && (attr->cb_size >= sizeof(StaticEventGroup_t))) { + mem = 1; + } + else { + if ((attr->cb_mem == NULL) && (attr->cb_size == 0U)) { + mem = 0; + } + } + } + else { + mem = 0; + } + + if (mem == 1) { + #if (configSUPPORT_STATIC_ALLOCATION == 1) + hEventGroup = xEventGroupCreateStatic (attr->cb_mem); + #endif + } + else { + if (mem == 0) { + #if (configSUPPORT_DYNAMIC_ALLOCATION == 1) + hEventGroup = xEventGroupCreate(); + #endif + } + } + } + + return ((osEventFlagsId_t)hEventGroup); +} + +uint32_t osEventFlagsSet (osEventFlagsId_t ef_id, uint32_t flags) { + EventGroupHandle_t hEventGroup = (EventGroupHandle_t)ef_id; + uint32_t rflags; + BaseType_t yield; + + if ((hEventGroup == NULL) || ((flags & EVENT_FLAGS_INVALID_BITS) != 0U)) { + rflags = (uint32_t)osErrorParameter; + } + else if (IS_IRQ()) { + #if (configUSE_OS2_EVENTFLAGS_FROM_ISR == 0) + (void)yield; + /* Enable timers and xTimerPendFunctionCall function to support osEventFlagsSet from ISR */ + rflags = (uint32_t)osErrorResource; + #else + yield = pdFALSE; + + if (xEventGroupSetBitsFromISR (hEventGroup, (EventBits_t)flags, &yield) == pdFAIL) { + rflags = (uint32_t)osErrorResource; + } else { + rflags = flags; + portYIELD_FROM_ISR (yield); + } + #endif + } + else { + rflags = xEventGroupSetBits (hEventGroup, (EventBits_t)flags); + } + + return (rflags); +} + +uint32_t osEventFlagsClear (osEventFlagsId_t ef_id, uint32_t flags) { + EventGroupHandle_t hEventGroup = (EventGroupHandle_t)ef_id; + uint32_t rflags; + + if ((hEventGroup == NULL) || ((flags & EVENT_FLAGS_INVALID_BITS) != 0U)) { + rflags = (uint32_t)osErrorParameter; + } + else if (IS_IRQ()) { + #if (configUSE_OS2_EVENTFLAGS_FROM_ISR == 0) + /* Enable timers and xTimerPendFunctionCall function to support osEventFlagsSet from ISR */ + rflags = (uint32_t)osErrorResource; + #else + rflags = xEventGroupGetBitsFromISR (hEventGroup); + + if (xEventGroupClearBitsFromISR (hEventGroup, (EventBits_t)flags) == pdFAIL) { + rflags = (uint32_t)osErrorResource; + } + #endif + } + else { + rflags = xEventGroupClearBits (hEventGroup, (EventBits_t)flags); + } + + return (rflags); +} + +uint32_t osEventFlagsGet (osEventFlagsId_t ef_id) { + EventGroupHandle_t hEventGroup = (EventGroupHandle_t)ef_id; + uint32_t rflags; + + if (ef_id == NULL) { + rflags = 0U; + } + else if (IS_IRQ()) { + rflags = xEventGroupGetBitsFromISR (hEventGroup); + } + else { + rflags = xEventGroupGetBits (hEventGroup); + } + + return (rflags); +} + +uint32_t osEventFlagsWait (osEventFlagsId_t ef_id, uint32_t flags, uint32_t options, uint32_t timeout) { + EventGroupHandle_t hEventGroup = (EventGroupHandle_t)ef_id; + BaseType_t wait_all; + BaseType_t exit_clr; + uint32_t rflags; + + if ((hEventGroup == NULL) || ((flags & EVENT_FLAGS_INVALID_BITS) != 0U)) { + rflags = (uint32_t)osErrorParameter; + } + else if (IS_IRQ()) { + rflags = (uint32_t)osErrorISR; + } + else { + if (options & osFlagsWaitAll) { + wait_all = pdTRUE; + } else { + wait_all = pdFAIL; + } + + if (options & osFlagsNoClear) { + exit_clr = pdFAIL; + } else { + exit_clr = pdTRUE; + } + + rflags = xEventGroupWaitBits (hEventGroup, (EventBits_t)flags, exit_clr, wait_all, (TickType_t)timeout); + + if (options & osFlagsWaitAll) { + if ((flags & rflags) != flags) { + if (timeout > 0U) { + rflags = (uint32_t)osErrorTimeout; + } else { + rflags = (uint32_t)osErrorResource; + } + } + } + else { + if ((flags & rflags) == 0U) { + if (timeout > 0U) { + rflags = (uint32_t)osErrorTimeout; + } else { + rflags = (uint32_t)osErrorResource; + } + } + } + } + + return (rflags); +} + +osStatus_t osEventFlagsDelete (osEventFlagsId_t ef_id) { + EventGroupHandle_t hEventGroup = (EventGroupHandle_t)ef_id; + osStatus_t stat; + +#ifndef USE_FreeRTOS_HEAP_1 + if (IS_IRQ()) { + stat = osErrorISR; + } + else if (hEventGroup == NULL) { + stat = osErrorParameter; + } + else { + stat = osOK; + vEventGroupDelete (hEventGroup); + } +#else + stat = osError; +#endif + + return (stat); +} + +/*---------------------------------------------------------------------------*/ +#if (configUSE_OS2_MUTEX == 1) + +osMutexId_t osMutexNew (const osMutexAttr_t *attr) { + SemaphoreHandle_t hMutex; + uint32_t type; + uint32_t rmtx; + int32_t mem; + #if (configQUEUE_REGISTRY_SIZE > 0) + const char *name; + #endif + + hMutex = NULL; + + if (!IS_IRQ()) { + if (attr != NULL) { + type = attr->attr_bits; + } else { + type = 0U; + } + + if ((type & osMutexRecursive) == osMutexRecursive) { + rmtx = 1U; + } else { + rmtx = 0U; + } + + if ((type & osMutexRobust) != osMutexRobust) { + mem = -1; + + if (attr != NULL) { + if ((attr->cb_mem != NULL) && (attr->cb_size >= sizeof(StaticSemaphore_t))) { + mem = 1; + } + else { + if ((attr->cb_mem == NULL) && (attr->cb_size == 0U)) { + mem = 0; + } + } + } + else { + mem = 0; + } + + if (mem == 1) { + #if (configSUPPORT_STATIC_ALLOCATION == 1) + if (rmtx != 0U) { + #if (configUSE_RECURSIVE_MUTEXES == 1) + hMutex = xSemaphoreCreateRecursiveMutexStatic (attr->cb_mem); + #endif + } + else { + hMutex = xSemaphoreCreateMutexStatic (attr->cb_mem); + } + #endif + } + else { + if (mem == 0) { + #if (configSUPPORT_DYNAMIC_ALLOCATION == 1) + if (rmtx != 0U) { + #if (configUSE_RECURSIVE_MUTEXES == 1) + hMutex = xSemaphoreCreateRecursiveMutex (); + #endif + } else { + hMutex = xSemaphoreCreateMutex (); + } + #endif + } + } + + #if (configQUEUE_REGISTRY_SIZE > 0) + if (hMutex != NULL) { + if (attr != NULL) { + name = attr->name; + } else { + name = NULL; + } + vQueueAddToRegistry (hMutex, name); + } + #endif + + if ((hMutex != NULL) && (rmtx != 0U)) { + hMutex = (SemaphoreHandle_t)((uint32_t)hMutex | 1U); + } + } + } + + return ((osMutexId_t)hMutex); +} + +osStatus_t osMutexAcquire (osMutexId_t mutex_id, uint32_t timeout) { + SemaphoreHandle_t hMutex; + osStatus_t stat; + uint32_t rmtx; + + hMutex = (SemaphoreHandle_t)((uint32_t)mutex_id & ~1U); + + rmtx = (uint32_t)mutex_id & 1U; + + stat = osOK; + + if (IS_IRQ()) { + stat = osErrorISR; + } + else if (hMutex == NULL) { + stat = osErrorParameter; + } + else { + if (rmtx != 0U) { + #if (configUSE_RECURSIVE_MUTEXES == 1) + if (xSemaphoreTakeRecursive (hMutex, timeout) != pdPASS) { + if (timeout != 0U) { + stat = osErrorTimeout; + } else { + stat = osErrorResource; + } + } + #endif + } + else { + if (xSemaphoreTake (hMutex, timeout) != pdPASS) { + if (timeout != 0U) { + stat = osErrorTimeout; + } else { + stat = osErrorResource; + } + } + } + } + + return (stat); +} + +osStatus_t osMutexRelease (osMutexId_t mutex_id) { + SemaphoreHandle_t hMutex; + osStatus_t stat; + uint32_t rmtx; + + hMutex = (SemaphoreHandle_t)((uint32_t)mutex_id & ~1U); + + rmtx = (uint32_t)mutex_id & 1U; + + stat = osOK; + + if (IS_IRQ()) { + stat = osErrorISR; + } + else if (hMutex == NULL) { + stat = osErrorParameter; + } + else { + if (rmtx != 0U) { + #if (configUSE_RECURSIVE_MUTEXES == 1) + if (xSemaphoreGiveRecursive (hMutex) != pdPASS) { + stat = osErrorResource; + } + #endif + } + else { + if (xSemaphoreGive (hMutex) != pdPASS) { + stat = osErrorResource; + } + } + } + + return (stat); +} + +osThreadId_t osMutexGetOwner (osMutexId_t mutex_id) { + SemaphoreHandle_t hMutex; + osThreadId_t owner; + + hMutex = (SemaphoreHandle_t)((uint32_t)mutex_id & ~1U); + + if (IS_IRQ() || (hMutex == NULL)) { + owner = NULL; + } else { + owner = (osThreadId_t)xSemaphoreGetMutexHolder (hMutex); + } + + return (owner); +} + +osStatus_t osMutexDelete (osMutexId_t mutex_id) { + osStatus_t stat; +#ifndef USE_FreeRTOS_HEAP_1 + SemaphoreHandle_t hMutex; + + hMutex = (SemaphoreHandle_t)((uint32_t)mutex_id & ~1U); + + if (IS_IRQ()) { + stat = osErrorISR; + } + else if (hMutex == NULL) { + stat = osErrorParameter; + } + else { + #if (configQUEUE_REGISTRY_SIZE > 0) + vQueueUnregisterQueue (hMutex); + #endif + stat = osOK; + vSemaphoreDelete (hMutex); + } +#else + stat = osError; +#endif + + return (stat); +} +#endif /* (configUSE_OS2_MUTEX == 1) */ + +/*---------------------------------------------------------------------------*/ + +osSemaphoreId_t osSemaphoreNew (uint32_t max_count, uint32_t initial_count, const osSemaphoreAttr_t *attr) { + SemaphoreHandle_t hSemaphore; + int32_t mem; + #if (configQUEUE_REGISTRY_SIZE > 0) + const char *name; + #endif + + hSemaphore = NULL; + + if (!IS_IRQ() && (max_count > 0U) && (initial_count <= max_count)) { + mem = -1; + + if (attr != NULL) { + if ((attr->cb_mem != NULL) && (attr->cb_size >= sizeof(StaticSemaphore_t))) { + mem = 1; + } + else { + if ((attr->cb_mem == NULL) && (attr->cb_size == 0U)) { + mem = 0; + } + } + } + else { + mem = 0; + } + + if (mem != -1) { + if (max_count == 1U) { + if (mem == 1) { + #if (configSUPPORT_STATIC_ALLOCATION == 1) + hSemaphore = xSemaphoreCreateBinaryStatic ((StaticSemaphore_t *)attr->cb_mem); + #endif + } + else { + #if (configSUPPORT_DYNAMIC_ALLOCATION == 1) + hSemaphore = xSemaphoreCreateBinary(); + #endif + } + + if ((hSemaphore != NULL) && (initial_count != 0U)) { + if (xSemaphoreGive (hSemaphore) != pdPASS) { + vSemaphoreDelete (hSemaphore); + hSemaphore = NULL; + } + } + } + else { + if (mem == 1) { + #if (configSUPPORT_STATIC_ALLOCATION == 1) + hSemaphore = xSemaphoreCreateCountingStatic (max_count, initial_count, (StaticSemaphore_t *)attr->cb_mem); + #endif + } + else { + #if (configSUPPORT_DYNAMIC_ALLOCATION == 1) + hSemaphore = xSemaphoreCreateCounting (max_count, initial_count); + #endif + } + } + + #if (configQUEUE_REGISTRY_SIZE > 0) + if (hSemaphore != NULL) { + if (attr != NULL) { + name = attr->name; + } else { + name = NULL; + } + vQueueAddToRegistry (hSemaphore, name); + } + #endif + } + } + + return ((osSemaphoreId_t)hSemaphore); +} + +osStatus_t osSemaphoreAcquire (osSemaphoreId_t semaphore_id, uint32_t timeout) { + SemaphoreHandle_t hSemaphore = (SemaphoreHandle_t)semaphore_id; + osStatus_t stat; + BaseType_t yield; + + stat = osOK; + + if (hSemaphore == NULL) { + stat = osErrorParameter; + } + else if (IS_IRQ()) { + if (timeout != 0U) { + stat = osErrorParameter; + } + else { + yield = pdFALSE; + + if (xSemaphoreTakeFromISR (hSemaphore, &yield) != pdPASS) { + stat = osErrorResource; + } else { + portYIELD_FROM_ISR (yield); + } + } + } + else { + if (xSemaphoreTake (hSemaphore, (TickType_t)timeout) != pdPASS) { + if (timeout != 0U) { + stat = osErrorTimeout; + } else { + stat = osErrorResource; + } + } + } + + return (stat); +} + +osStatus_t osSemaphoreRelease (osSemaphoreId_t semaphore_id) { + SemaphoreHandle_t hSemaphore = (SemaphoreHandle_t)semaphore_id; + osStatus_t stat; + BaseType_t yield; + + stat = osOK; + + if (hSemaphore == NULL) { + stat = osErrorParameter; + } + else if (IS_IRQ()) { + yield = pdFALSE; + + if (xSemaphoreGiveFromISR (hSemaphore, &yield) != pdTRUE) { + stat = osErrorResource; + } else { + portYIELD_FROM_ISR (yield); + } + } + else { + if (xSemaphoreGive (hSemaphore) != pdPASS) { + stat = osErrorResource; + } + } + + return (stat); +} + +uint32_t osSemaphoreGetCount (osSemaphoreId_t semaphore_id) { + SemaphoreHandle_t hSemaphore = (SemaphoreHandle_t)semaphore_id; + uint32_t count; + + if (hSemaphore == NULL) { + count = 0U; + } + else if (IS_IRQ()) { + count = uxQueueMessagesWaitingFromISR (hSemaphore); + } else { + count = (uint32_t)uxSemaphoreGetCount (hSemaphore); + } + + return (count); +} + +osStatus_t osSemaphoreDelete (osSemaphoreId_t semaphore_id) { + SemaphoreHandle_t hSemaphore = (SemaphoreHandle_t)semaphore_id; + osStatus_t stat; + +#ifndef USE_FreeRTOS_HEAP_1 + if (IS_IRQ()) { + stat = osErrorISR; + } + else if (hSemaphore == NULL) { + stat = osErrorParameter; + } + else { + #if (configQUEUE_REGISTRY_SIZE > 0) + vQueueUnregisterQueue (hSemaphore); + #endif + + stat = osOK; + vSemaphoreDelete (hSemaphore); + } +#else + stat = osError; +#endif + + return (stat); +} + +/*---------------------------------------------------------------------------*/ + +osMessageQueueId_t osMessageQueueNew (uint32_t msg_count, uint32_t msg_size, const osMessageQueueAttr_t *attr) { + QueueHandle_t hQueue; + int32_t mem; + #if (configQUEUE_REGISTRY_SIZE > 0) + const char *name; + #endif + + hQueue = NULL; + + if (!IS_IRQ() && (msg_count > 0U) && (msg_size > 0U)) { + mem = -1; + + if (attr != NULL) { + if ((attr->cb_mem != NULL) && (attr->cb_size >= sizeof(StaticQueue_t)) && + (attr->mq_mem != NULL) && (attr->mq_size >= (msg_count * msg_size))) { + mem = 1; + } + else { + if ((attr->cb_mem == NULL) && (attr->cb_size == 0U) && + (attr->mq_mem == NULL) && (attr->mq_size == 0U)) { + mem = 0; + } + } + } + else { + mem = 0; + } + + if (mem == 1) { + #if (configSUPPORT_STATIC_ALLOCATION == 1) + hQueue = xQueueCreateStatic (msg_count, msg_size, attr->mq_mem, attr->cb_mem); + #endif + } + else { + if (mem == 0) { + #if (configSUPPORT_DYNAMIC_ALLOCATION == 1) + hQueue = xQueueCreate (msg_count, msg_size); + #endif + } + } + + #if (configQUEUE_REGISTRY_SIZE > 0) + if (hQueue != NULL) { + if (attr != NULL) { + name = attr->name; + } else { + name = NULL; + } + vQueueAddToRegistry (hQueue, name); + } + #endif + + } + + return ((osMessageQueueId_t)hQueue); +} + +osStatus_t osMessageQueuePut (osMessageQueueId_t mq_id, const void *msg_ptr, uint8_t msg_prio, uint32_t timeout) { + QueueHandle_t hQueue = (QueueHandle_t)mq_id; + osStatus_t stat; + BaseType_t yield; + + (void)msg_prio; /* Message priority is ignored */ + + stat = osOK; + + if (IS_IRQ()) { + if ((hQueue == NULL) || (msg_ptr == NULL) || (timeout != 0U)) { + stat = osErrorParameter; + } + else { + yield = pdFALSE; + + if (xQueueSendToBackFromISR (hQueue, msg_ptr, &yield) != pdTRUE) { + stat = osErrorResource; + } else { + portYIELD_FROM_ISR (yield); + } + } + } + else { + if ((hQueue == NULL) || (msg_ptr == NULL)) { + stat = osErrorParameter; + } + else { + if (xQueueSendToBack (hQueue, msg_ptr, (TickType_t)timeout) != pdPASS) { + if (timeout != 0U) { + stat = osErrorTimeout; + } else { + stat = osErrorResource; + } + } + } + } + + return (stat); +} + +osStatus_t osMessageQueueGet (osMessageQueueId_t mq_id, void *msg_ptr, uint8_t *msg_prio, uint32_t timeout) { + QueueHandle_t hQueue = (QueueHandle_t)mq_id; + osStatus_t stat; + BaseType_t yield; + + (void)msg_prio; /* Message priority is ignored */ + + stat = osOK; + + if (IS_IRQ()) { + if ((hQueue == NULL) || (msg_ptr == NULL) || (timeout != 0U)) { + stat = osErrorParameter; + } + else { + yield = pdFALSE; + + if (xQueueReceiveFromISR (hQueue, msg_ptr, &yield) != pdPASS) { + stat = osErrorResource; + } else { + portYIELD_FROM_ISR (yield); + } + } + } + else { + if ((hQueue == NULL) || (msg_ptr == NULL)) { + stat = osErrorParameter; + } + else { + if (xQueueReceive (hQueue, msg_ptr, (TickType_t)timeout) != pdPASS) { + if (timeout != 0U) { + stat = osErrorTimeout; + } else { + stat = osErrorResource; + } + } + } + } + + return (stat); +} + +uint32_t osMessageQueueGetCapacity (osMessageQueueId_t mq_id) { + StaticQueue_t *mq = (StaticQueue_t *)mq_id; + uint32_t capacity; + + if (mq == NULL) { + capacity = 0U; + } else { + /* capacity = pxQueue->uxLength */ + capacity = mq->uxDummy4[1]; + } + + return (capacity); +} + +uint32_t osMessageQueueGetMsgSize (osMessageQueueId_t mq_id) { + StaticQueue_t *mq = (StaticQueue_t *)mq_id; + uint32_t size; + + if (mq == NULL) { + size = 0U; + } else { + /* size = pxQueue->uxItemSize */ + size = mq->uxDummy4[2]; + } + + return (size); +} + +uint32_t osMessageQueueGetCount (osMessageQueueId_t mq_id) { + QueueHandle_t hQueue = (QueueHandle_t)mq_id; + UBaseType_t count; + + if (hQueue == NULL) { + count = 0U; + } + else if (IS_IRQ()) { + count = uxQueueMessagesWaitingFromISR (hQueue); + } + else { + count = uxQueueMessagesWaiting (hQueue); + } + + return ((uint32_t)count); +} + +uint32_t osMessageQueueGetSpace (osMessageQueueId_t mq_id) { + StaticQueue_t *mq = (StaticQueue_t *)mq_id; + uint32_t space; + uint32_t isrm; + + if (mq == NULL) { + space = 0U; + } + else if (IS_IRQ()) { + isrm = taskENTER_CRITICAL_FROM_ISR(); + + /* space = pxQueue->uxLength - pxQueue->uxMessagesWaiting; */ + space = mq->uxDummy4[1] - mq->uxDummy4[0]; + + taskEXIT_CRITICAL_FROM_ISR(isrm); + } + else { + space = (uint32_t)uxQueueSpacesAvailable ((QueueHandle_t)mq); + } + + return (space); +} + +osStatus_t osMessageQueueReset (osMessageQueueId_t mq_id) { + QueueHandle_t hQueue = (QueueHandle_t)mq_id; + osStatus_t stat; + + if (IS_IRQ()) { + stat = osErrorISR; + } + else if (hQueue == NULL) { + stat = osErrorParameter; + } + else { + stat = osOK; + (void)xQueueReset (hQueue); + } + + return (stat); +} + +osStatus_t osMessageQueueDelete (osMessageQueueId_t mq_id) { + QueueHandle_t hQueue = (QueueHandle_t)mq_id; + osStatus_t stat; + +#ifndef USE_FreeRTOS_HEAP_1 + if (IS_IRQ()) { + stat = osErrorISR; + } + else if (hQueue == NULL) { + stat = osErrorParameter; + } + else { + #if (configQUEUE_REGISTRY_SIZE > 0) + vQueueUnregisterQueue (hQueue); + #endif + + stat = osOK; + vQueueDelete (hQueue); + } +#else + stat = osError; +#endif + + return (stat); +} + +/*---------------------------------------------------------------------------*/ +#ifdef FREERTOS_MPOOL_H_ + +/* Static memory pool functions */ +static void FreeBlock (MemPool_t *mp, void *block); +static void *AllocBlock (MemPool_t *mp); +static void *CreateBlock (MemPool_t *mp); + +osMemoryPoolId_t osMemoryPoolNew (uint32_t block_count, uint32_t block_size, const osMemoryPoolAttr_t *attr) { + MemPool_t *mp; + const char *name; + int32_t mem_cb, mem_mp; + uint32_t sz; + + if (IS_IRQ()) { + mp = NULL; + } + else if ((block_count == 0U) || (block_size == 0U)) { + mp = NULL; + } + else { + mp = NULL; + sz = MEMPOOL_ARR_SIZE (block_count, block_size); + + name = NULL; + mem_cb = -1; + mem_mp = -1; + + if (attr != NULL) { + if (attr->name != NULL) { + name = attr->name; + } + + if ((attr->cb_mem != NULL) && (attr->cb_size >= sizeof(MemPool_t))) { + /* Static control block is provided */ + mem_cb = 1; + } + else if ((attr->cb_mem == NULL) && (attr->cb_size == 0U)) { + /* Allocate control block memory on heap */ + mem_cb = 0; + } + + if ((attr->mp_mem == NULL) && (attr->mp_size == 0U)) { + /* Allocate memory array on heap */ + mem_mp = 0; + } + else { + if (attr->mp_mem != NULL) { + /* Check if array is 4-byte aligned */ + if (((uint32_t)attr->mp_mem & 3U) == 0U) { + /* Check if array big enough */ + if (attr->mp_size >= sz) { + /* Static memory pool array is provided */ + mem_mp = 1; + } + } + } + } + } + else { + /* Attributes not provided, allocate memory on heap */ + mem_cb = 0; + mem_mp = 0; + } + + if (mem_cb == 0) { + mp = pvPortMalloc (sizeof(MemPool_t)); + } else { + mp = attr->cb_mem; + } + + if (mp != NULL) { + /* Create a semaphore (max count == initial count == block_count) */ + #if (configSUPPORT_STATIC_ALLOCATION == 1) + mp->sem = xSemaphoreCreateCountingStatic (block_count, block_count, &mp->mem_sem); + #elif (configSUPPORT_DYNAMIC_ALLOCATION == 1) + mp->sem = xSemaphoreCreateCounting (block_count, block_count); + #else + mp->sem == NULL; + #endif + + if (mp->sem != NULL) { + /* Setup memory array */ + if (mem_mp == 0) { + mp->mem_arr = pvPortMalloc (sz); + } else { + mp->mem_arr = attr->mp_mem; + } + } + } + + if ((mp != NULL) && (mp->mem_arr != NULL)) { + /* Memory pool can be created */ + mp->head = NULL; + mp->mem_sz = sz; + mp->name = name; + mp->bl_sz = block_size; + mp->bl_cnt = block_count; + mp->n = 0U; + + /* Set heap allocated memory flags */ + mp->status = MPOOL_STATUS; + + if (mem_cb == 0) { + /* Control block on heap */ + mp->status |= 1U; + } + if (mem_mp == 0) { + /* Memory array on heap */ + mp->status |= 2U; + } + } + else { + /* Memory pool cannot be created, release allocated resources */ + if ((mem_cb == 0) && (mp != NULL)) { + /* Free control block memory */ + vPortFree (mp); + } + mp = NULL; + } + } + + return (mp); +} + +const char *osMemoryPoolGetName (osMemoryPoolId_t mp_id) { + MemPool_t *mp = (osMemoryPoolId_t)mp_id; + const char *p; + + if (IS_IRQ()) { + p = NULL; + } + else if (mp_id == NULL) { + p = NULL; + } + else { + p = mp->name; + } + + return (p); +} + +void *osMemoryPoolAlloc (osMemoryPoolId_t mp_id, uint32_t timeout) { + MemPool_t *mp; + void *block; + uint32_t isrm; + + if (mp_id == NULL) { + /* Invalid input parameters */ + block = NULL; + } + else { + block = NULL; + + mp = (MemPool_t *)mp_id; + + if ((mp->status & MPOOL_STATUS) == MPOOL_STATUS) { + if (IS_IRQ()) { + if (timeout == 0U) { + if (xSemaphoreTakeFromISR (mp->sem, NULL) == pdTRUE) { + if ((mp->status & MPOOL_STATUS) == MPOOL_STATUS) { + isrm = taskENTER_CRITICAL_FROM_ISR(); + + /* Get a block from the free-list */ + block = AllocBlock(mp); + + if (block == NULL) { + /* List of free blocks is empty, 'create' new block */ + block = CreateBlock(mp); + } + + taskEXIT_CRITICAL_FROM_ISR(isrm); + } + } + } + } + else { + if (xSemaphoreTake (mp->sem, (TickType_t)timeout) == pdTRUE) { + if ((mp->status & MPOOL_STATUS) == MPOOL_STATUS) { + taskENTER_CRITICAL(); + + /* Get a block from the free-list */ + block = AllocBlock(mp); + + if (block == NULL) { + /* List of free blocks is empty, 'create' new block */ + block = CreateBlock(mp); + } + + taskEXIT_CRITICAL(); + } + } + } + } + } + + return (block); +} + +osStatus_t osMemoryPoolFree (osMemoryPoolId_t mp_id, void *block) { + MemPool_t *mp; + osStatus_t stat; + uint32_t isrm; + BaseType_t yield; + + if ((mp_id == NULL) || (block == NULL)) { + /* Invalid input parameters */ + stat = osErrorParameter; + } + else { + mp = (MemPool_t *)mp_id; + + if ((mp->status & MPOOL_STATUS) != MPOOL_STATUS) { + /* Invalid object status */ + stat = osErrorResource; + } + else if ((block < (void *)&mp->mem_arr[0]) || (block > (void*)&mp->mem_arr[mp->mem_sz-1])) { + /* Block pointer outside of memory array area */ + stat = osErrorParameter; + } + else { + stat = osOK; + + if (IS_IRQ()) { + if (uxSemaphoreGetCountFromISR (mp->sem) == mp->bl_cnt) { + stat = osErrorResource; + } + else { + isrm = taskENTER_CRITICAL_FROM_ISR(); + + /* Add block to the list of free blocks */ + FreeBlock(mp, block); + + taskEXIT_CRITICAL_FROM_ISR(isrm); + + yield = pdFALSE; + xSemaphoreGiveFromISR (mp->sem, &yield); + portYIELD_FROM_ISR (yield); + } + } + else { + if (uxSemaphoreGetCount (mp->sem) == mp->bl_cnt) { + stat = osErrorResource; + } + else { + taskENTER_CRITICAL(); + + /* Add block to the list of free blocks */ + FreeBlock(mp, block); + + taskEXIT_CRITICAL(); + + xSemaphoreGive (mp->sem); + } + } + } + } + + return (stat); +} + +uint32_t osMemoryPoolGetCapacity (osMemoryPoolId_t mp_id) { + MemPool_t *mp; + uint32_t n; + + if (mp_id == NULL) { + /* Invalid input parameters */ + n = 0U; + } + else { + mp = (MemPool_t *)mp_id; + + if ((mp->status & MPOOL_STATUS) != MPOOL_STATUS) { + /* Invalid object status */ + n = 0U; + } + else { + n = mp->bl_cnt; + } + } + + /* Return maximum number of memory blocks */ + return (n); +} + +uint32_t osMemoryPoolGetBlockSize (osMemoryPoolId_t mp_id) { + MemPool_t *mp; + uint32_t sz; + + if (mp_id == NULL) { + /* Invalid input parameters */ + sz = 0U; + } + else { + mp = (MemPool_t *)mp_id; + + if ((mp->status & MPOOL_STATUS) != MPOOL_STATUS) { + /* Invalid object status */ + sz = 0U; + } + else { + sz = mp->bl_sz; + } + } + + /* Return memory block size in bytes */ + return (sz); +} + +uint32_t osMemoryPoolGetCount (osMemoryPoolId_t mp_id) { + MemPool_t *mp; + uint32_t n; + + if (mp_id == NULL) { + /* Invalid input parameters */ + n = 0U; + } + else { + mp = (MemPool_t *)mp_id; + + if ((mp->status & MPOOL_STATUS) != MPOOL_STATUS) { + /* Invalid object status */ + n = 0U; + } + else { + if (IS_IRQ()) { + n = uxSemaphoreGetCountFromISR (mp->sem); + } else { + n = uxSemaphoreGetCount (mp->sem); + } + + n = mp->bl_cnt - n; + } + } + + /* Return number of memory blocks used */ + return (n); +} + +uint32_t osMemoryPoolGetSpace (osMemoryPoolId_t mp_id) { + MemPool_t *mp; + uint32_t n; + + if (mp_id == NULL) { + /* Invalid input parameters */ + n = 0U; + } + else { + mp = (MemPool_t *)mp_id; + + if ((mp->status & MPOOL_STATUS) != MPOOL_STATUS) { + /* Invalid object status */ + n = 0U; + } + else { + if (IS_IRQ()) { + n = uxSemaphoreGetCountFromISR (mp->sem); + } else { + n = uxSemaphoreGetCount (mp->sem); + } + } + } + + /* Return number of memory blocks available */ + return (n); +} + +osStatus_t osMemoryPoolDelete (osMemoryPoolId_t mp_id) { + MemPool_t *mp; + osStatus_t stat; + + if (mp_id == NULL) { + /* Invalid input parameters */ + stat = osErrorParameter; + } + else if (IS_IRQ()) { + stat = osErrorISR; + } + else { + mp = (MemPool_t *)mp_id; + + taskENTER_CRITICAL(); + + /* Invalidate control block status */ + mp->status = mp->status & 3U; + + /* Wake-up tasks waiting for pool semaphore */ + while (xSemaphoreGive (mp->sem) == pdTRUE); + + mp->head = NULL; + mp->bl_sz = 0U; + mp->bl_cnt = 0U; + + if ((mp->status & 2U) != 0U) { + /* Memory pool array allocated on heap */ + vPortFree (mp->mem_arr); + } + if ((mp->status & 1U) != 0U) { + /* Memory pool control block allocated on heap */ + vPortFree (mp); + } + + taskEXIT_CRITICAL(); + + stat = osOK; + } + + return (stat); +} + +/* + Create new block given according to the current block index. +*/ +static void *CreateBlock (MemPool_t *mp) { + MemPoolBlock_t *p = NULL; + + if (mp->n < mp->bl_cnt) { + /* Unallocated blocks exist, set pointer to new block */ + p = (void *)(mp->mem_arr + (mp->bl_sz * mp->n)); + + /* Increment block index */ + mp->n += 1U; + } + + return (p); +} + +/* + Allocate a block by reading the list of free blocks. +*/ +static void *AllocBlock (MemPool_t *mp) { + MemPoolBlock_t *p = NULL; + + if (mp->head != NULL) { + /* List of free block exists, get head block */ + p = mp->head; + + /* Head block is now next on the list */ + mp->head = p->next; + } + + return (p); +} + +/* + Free block by putting it to the list of free blocks. +*/ +static void FreeBlock (MemPool_t *mp, void *block) { + MemPoolBlock_t *p = block; + + /* Store current head into block memory space */ + p->next = mp->head; + + /* Store current block as new head */ + mp->head = p; +} +#endif /* FREERTOS_MPOOL_H_ */ +/*---------------------------------------------------------------------------*/ + +/* Callback function prototypes */ +extern void vApplicationIdleHook (void); +extern void vApplicationTickHook (void); +extern void vApplicationMallocFailedHook (void); +extern void vApplicationDaemonTaskStartupHook (void); +extern void vApplicationStackOverflowHook (TaskHandle_t xTask, signed char *pcTaskName); + +/** + Dummy implementation of the callback function vApplicationIdleHook(). +*/ +#if (configUSE_IDLE_HOOK == 1) +__WEAK void vApplicationIdleHook (void){} +#endif + +/** + Dummy implementation of the callback function vApplicationTickHook(). +*/ +#if (configUSE_TICK_HOOK == 1) + __WEAK void vApplicationTickHook (void){} +#endif + +/** + Dummy implementation of the callback function vApplicationMallocFailedHook(). +*/ +#if (configUSE_MALLOC_FAILED_HOOK == 1) +__WEAK void vApplicationMallocFailedHook (void){} +#endif + +/** + Dummy implementation of the callback function vApplicationDaemonTaskStartupHook(). +*/ +#if (configUSE_DAEMON_TASK_STARTUP_HOOK == 1) +__WEAK void vApplicationDaemonTaskStartupHook (void){} +#endif + +/** + Dummy implementation of the callback function vApplicationStackOverflowHook(). +*/ +#if (configCHECK_FOR_STACK_OVERFLOW > 0) +__WEAK void vApplicationStackOverflowHook (TaskHandle_t xTask, signed char *pcTaskName) { + (void)xTask; + (void)pcTaskName; + configASSERT(0); +} +#endif + +/*---------------------------------------------------------------------------*/ +#if (configSUPPORT_STATIC_ALLOCATION == 1) +/* External Idle and Timer task static memory allocation functions */ +extern void vApplicationGetIdleTaskMemory (StaticTask_t **ppxIdleTaskTCBBuffer, StackType_t **ppxIdleTaskStackBuffer, uint32_t *pulIdleTaskStackSize); +extern void vApplicationGetTimerTaskMemory (StaticTask_t **ppxTimerTaskTCBBuffer, StackType_t **ppxTimerTaskStackBuffer, uint32_t *pulTimerTaskStackSize); + +/* + vApplicationGetIdleTaskMemory gets called when configSUPPORT_STATIC_ALLOCATION + equals to 1 and is required for static memory allocation support. +*/ +__WEAK void vApplicationGetIdleTaskMemory (StaticTask_t **ppxIdleTaskTCBBuffer, StackType_t **ppxIdleTaskStackBuffer, uint32_t *pulIdleTaskStackSize) { + /* Idle task control block and stack */ + static StaticTask_t Idle_TCB; + static StackType_t Idle_Stack[configMINIMAL_STACK_SIZE]; + + *ppxIdleTaskTCBBuffer = &Idle_TCB; + *ppxIdleTaskStackBuffer = &Idle_Stack[0]; + *pulIdleTaskStackSize = (uint32_t)configMINIMAL_STACK_SIZE; +} + +/* + vApplicationGetTimerTaskMemory gets called when configSUPPORT_STATIC_ALLOCATION + equals to 1 and is required for static memory allocation support. +*/ +__WEAK void vApplicationGetTimerTaskMemory (StaticTask_t **ppxTimerTaskTCBBuffer, StackType_t **ppxTimerTaskStackBuffer, uint32_t *pulTimerTaskStackSize) { + /* Timer task control block and stack */ + static StaticTask_t Timer_TCB; + static StackType_t Timer_Stack[configTIMER_TASK_STACK_DEPTH]; + + *ppxTimerTaskTCBBuffer = &Timer_TCB; + *ppxTimerTaskStackBuffer = &Timer_Stack[0]; + *pulTimerTaskStackSize = (uint32_t)configTIMER_TASK_STACK_DEPTH; +} +#endif diff --git a/RTOS_Dual_Sensor_Single_Board_Testing/Middlewares/Third_Party/FreeRTOS/Source/CMSIS_RTOS_V2/cmsis_os2.h b/RTOS_Dual_Sensor_Single_Board_Testing/Middlewares/Third_Party/FreeRTOS/Source/CMSIS_RTOS_V2/cmsis_os2.h new file mode 100644 index 0000000..9774cc7 --- /dev/null +++ b/RTOS_Dual_Sensor_Single_Board_Testing/Middlewares/Third_Party/FreeRTOS/Source/CMSIS_RTOS_V2/cmsis_os2.h @@ -0,0 +1,734 @@ +/* -------------------------------------------------------------------------- + * Portions Copyright © 2017 STMicroelectronics International N.V. All rights reserved. + * Portions Copyright (c) 2013-2017 ARM Limited. All rights reserved. + * -------------------------------------------------------------------------- + * + * SPDX-License-Identifier: Apache-2.0 + * + * Licensed under the Apache License, Version 2.0 (the License); you may + * not use this file except in compliance with the License. + * You may obtain a copy of the License at + * + * www.apache.org/licenses/LICENSE-2.0 + * + * Unless required by applicable law or agreed to in writing, software + * distributed under the License is distributed on an AS IS BASIS, WITHOUT + * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + * See the License for the specific language governing permissions and + * limitations under the License. + * + * Name: cmsis_os2.h + * Purpose: CMSIS RTOS2 wrapper for FreeRTOS + * + *---------------------------------------------------------------------------*/ + +#ifndef CMSIS_OS2_H_ +#define CMSIS_OS2_H_ + +#ifndef __NO_RETURN +#if defined(__CC_ARM) +#define __NO_RETURN __declspec(noreturn) +#elif defined(__ARMCC_VERSION) && (__ARMCC_VERSION >= 6010050) +#define __NO_RETURN __attribute__((__noreturn__)) +#elif defined(__GNUC__) +#define __NO_RETURN __attribute__((__noreturn__)) +#elif defined(__ICCARM__) +#define __NO_RETURN __noreturn +#else +#define __NO_RETURN +#endif +#endif + +#include +#include + +#ifdef __cplusplus +extern "C" +{ +#endif + + +// ==== Enumerations, structures, defines ==== + +/// Version information. +typedef struct { + uint32_t api; ///< API version (major.minor.rev: mmnnnrrrr dec). + uint32_t kernel; ///< Kernel version (major.minor.rev: mmnnnrrrr dec). +} osVersion_t; + +/// Kernel state. +typedef enum { + osKernelInactive = 0, ///< Inactive. + osKernelReady = 1, ///< Ready. + osKernelRunning = 2, ///< Running. + osKernelLocked = 3, ///< Locked. + osKernelSuspended = 4, ///< Suspended. + osKernelError = -1, ///< Error. + osKernelReserved = 0x7FFFFFFFU ///< Prevents enum down-size compiler optimization. +} osKernelState_t; + +/// Thread state. +typedef enum { + osThreadInactive = 0, ///< Inactive. + osThreadReady = 1, ///< Ready. + osThreadRunning = 2, ///< Running. + osThreadBlocked = 3, ///< Blocked. + osThreadTerminated = 4, ///< Terminated. + osThreadError = -1, ///< Error. + osThreadReserved = 0x7FFFFFFF ///< Prevents enum down-size compiler optimization. +} osThreadState_t; + +/// Priority values. +typedef enum { + osPriorityNone = 0, ///< No priority (not initialized). + osPriorityIdle = 1, ///< Reserved for Idle thread. + osPriorityLow = 8, ///< Priority: low + osPriorityLow1 = 8+1, ///< Priority: low + 1 + osPriorityLow2 = 8+2, ///< Priority: low + 2 + osPriorityLow3 = 8+3, ///< Priority: low + 3 + osPriorityLow4 = 8+4, ///< Priority: low + 4 + osPriorityLow5 = 8+5, ///< Priority: low + 5 + osPriorityLow6 = 8+6, ///< Priority: low + 6 + osPriorityLow7 = 8+7, ///< Priority: low + 7 + osPriorityBelowNormal = 16, ///< Priority: below normal + osPriorityBelowNormal1 = 16+1, ///< Priority: below normal + 1 + osPriorityBelowNormal2 = 16+2, ///< Priority: below normal + 2 + osPriorityBelowNormal3 = 16+3, ///< Priority: below normal + 3 + osPriorityBelowNormal4 = 16+4, ///< Priority: below normal + 4 + osPriorityBelowNormal5 = 16+5, ///< Priority: below normal + 5 + osPriorityBelowNormal6 = 16+6, ///< Priority: below normal + 6 + osPriorityBelowNormal7 = 16+7, ///< Priority: below normal + 7 + osPriorityNormal = 24, ///< Priority: normal + osPriorityNormal1 = 24+1, ///< Priority: normal + 1 + osPriorityNormal2 = 24+2, ///< Priority: normal + 2 + osPriorityNormal3 = 24+3, ///< Priority: normal + 3 + osPriorityNormal4 = 24+4, ///< Priority: normal + 4 + osPriorityNormal5 = 24+5, ///< Priority: normal + 5 + osPriorityNormal6 = 24+6, ///< Priority: normal + 6 + osPriorityNormal7 = 24+7, ///< Priority: normal + 7 + osPriorityAboveNormal = 32, ///< Priority: above normal + osPriorityAboveNormal1 = 32+1, ///< Priority: above normal + 1 + osPriorityAboveNormal2 = 32+2, ///< Priority: above normal + 2 + osPriorityAboveNormal3 = 32+3, ///< Priority: above normal + 3 + osPriorityAboveNormal4 = 32+4, ///< Priority: above normal + 4 + osPriorityAboveNormal5 = 32+5, ///< Priority: above normal + 5 + osPriorityAboveNormal6 = 32+6, ///< Priority: above normal + 6 + osPriorityAboveNormal7 = 32+7, ///< Priority: above normal + 7 + osPriorityHigh = 40, ///< Priority: high + osPriorityHigh1 = 40+1, ///< Priority: high + 1 + osPriorityHigh2 = 40+2, ///< Priority: high + 2 + osPriorityHigh3 = 40+3, ///< Priority: high + 3 + osPriorityHigh4 = 40+4, ///< Priority: high + 4 + osPriorityHigh5 = 40+5, ///< Priority: high + 5 + osPriorityHigh6 = 40+6, ///< Priority: high + 6 + osPriorityHigh7 = 40+7, ///< Priority: high + 7 + osPriorityRealtime = 48, ///< Priority: realtime + osPriorityRealtime1 = 48+1, ///< Priority: realtime + 1 + osPriorityRealtime2 = 48+2, ///< Priority: realtime + 2 + osPriorityRealtime3 = 48+3, ///< Priority: realtime + 3 + osPriorityRealtime4 = 48+4, ///< Priority: realtime + 4 + osPriorityRealtime5 = 48+5, ///< Priority: realtime + 5 + osPriorityRealtime6 = 48+6, ///< Priority: realtime + 6 + osPriorityRealtime7 = 48+7, ///< Priority: realtime + 7 + osPriorityISR = 56, ///< Reserved for ISR deferred thread. + osPriorityError = -1, ///< System cannot determine priority or illegal priority. + osPriorityReserved = 0x7FFFFFFF ///< Prevents enum down-size compiler optimization. +} osPriority_t; + +/// Entry point of a thread. +typedef void (*osThreadFunc_t) (void *argument); + +/// Timer callback function. +typedef void (*osTimerFunc_t) (void *argument); + +/// Timer type. +typedef enum { + osTimerOnce = 0, ///< One-shot timer. + osTimerPeriodic = 1 ///< Repeating timer. +} osTimerType_t; + +// Timeout value. +#define osWaitForever 0xFFFFFFFFU ///< Wait forever timeout value. + +// Flags options (\ref osThreadFlagsWait and \ref osEventFlagsWait). +#define osFlagsWaitAny 0x00000000U ///< Wait for any flag (default). +#define osFlagsWaitAll 0x00000001U ///< Wait for all flags. +#define osFlagsNoClear 0x00000002U ///< Do not clear flags which have been specified to wait for. + +// Flags errors (returned by osThreadFlagsXxxx and osEventFlagsXxxx). +#define osFlagsError 0x80000000U ///< Error indicator. +#define osFlagsErrorUnknown 0xFFFFFFFFU ///< osError (-1). +#define osFlagsErrorTimeout 0xFFFFFFFEU ///< osErrorTimeout (-2). +#define osFlagsErrorResource 0xFFFFFFFDU ///< osErrorResource (-3). +#define osFlagsErrorParameter 0xFFFFFFFCU ///< osErrorParameter (-4). +#define osFlagsErrorISR 0xFFFFFFFAU ///< osErrorISR (-6). + +// Thread attributes (attr_bits in \ref osThreadAttr_t). +#define osThreadDetached 0x00000000U ///< Thread created in detached mode (default) +#define osThreadJoinable 0x00000001U ///< Thread created in joinable mode + +// Mutex attributes (attr_bits in \ref osMutexAttr_t). +#define osMutexRecursive 0x00000001U ///< Recursive mutex. +#define osMutexPrioInherit 0x00000002U ///< Priority inherit protocol. +#define osMutexRobust 0x00000008U ///< Robust mutex. + +/// Status code values returned by CMSIS-RTOS functions. +typedef enum { + osOK = 0, ///< Operation completed successfully. + osError = -1, ///< Unspecified RTOS error: run-time error but no other error message fits. + osErrorTimeout = -2, ///< Operation not completed within the timeout period. + osErrorResource = -3, ///< Resource not available. + osErrorParameter = -4, ///< Parameter error. + osErrorNoMemory = -5, ///< System is out of memory: it was impossible to allocate or reserve memory for the operation. + osErrorISR = -6, ///< Not allowed in ISR context: the function cannot be called from interrupt service routines. + osStatusReserved = 0x7FFFFFFF ///< Prevents enum down-size compiler optimization. +} osStatus_t; + + +/// \details Thread ID identifies the thread. +typedef void *osThreadId_t; + +/// \details Timer ID identifies the timer. +typedef void *osTimerId_t; + +/// \details Event Flags ID identifies the event flags. +typedef void *osEventFlagsId_t; + +/// \details Mutex ID identifies the mutex. +typedef void *osMutexId_t; + +/// \details Semaphore ID identifies the semaphore. +typedef void *osSemaphoreId_t; + +/// \details Memory Pool ID identifies the memory pool. +typedef void *osMemoryPoolId_t; + +/// \details Message Queue ID identifies the message queue. +typedef void *osMessageQueueId_t; + + +#ifndef TZ_MODULEID_T +#define TZ_MODULEID_T +/// \details Data type that identifies secure software modules called by a process. +typedef uint32_t TZ_ModuleId_t; +#endif + + +/// Attributes structure for thread. +typedef struct { + const char *name; ///< name of the thread + uint32_t attr_bits; ///< attribute bits + void *cb_mem; ///< memory for control block + uint32_t cb_size; ///< size of provided memory for control block + void *stack_mem; ///< memory for stack + uint32_t stack_size; ///< size of stack + osPriority_t priority; ///< initial thread priority (default: osPriorityNormal) + TZ_ModuleId_t tz_module; ///< TrustZone module identifier + uint32_t reserved; ///< reserved (must be 0) +} osThreadAttr_t; + +/// Attributes structure for timer. +typedef struct { + const char *name; ///< name of the timer + uint32_t attr_bits; ///< attribute bits + void *cb_mem; ///< memory for control block + uint32_t cb_size; ///< size of provided memory for control block +} osTimerAttr_t; + +/// Attributes structure for event flags. +typedef struct { + const char *name; ///< name of the event flags + uint32_t attr_bits; ///< attribute bits + void *cb_mem; ///< memory for control block + uint32_t cb_size; ///< size of provided memory for control block +} osEventFlagsAttr_t; + +/// Attributes structure for mutex. +typedef struct { + const char *name; ///< name of the mutex + uint32_t attr_bits; ///< attribute bits + void *cb_mem; ///< memory for control block + uint32_t cb_size; ///< size of provided memory for control block +} osMutexAttr_t; + +/// Attributes structure for semaphore. +typedef struct { + const char *name; ///< name of the semaphore + uint32_t attr_bits; ///< attribute bits + void *cb_mem; ///< memory for control block + uint32_t cb_size; ///< size of provided memory for control block +} osSemaphoreAttr_t; + +/// Attributes structure for memory pool. +typedef struct { + const char *name; ///< name of the memory pool + uint32_t attr_bits; ///< attribute bits + void *cb_mem; ///< memory for control block + uint32_t cb_size; ///< size of provided memory for control block + void *mp_mem; ///< memory for data storage + uint32_t mp_size; ///< size of provided memory for data storage +} osMemoryPoolAttr_t; + +/// Attributes structure for message queue. +typedef struct { + const char *name; ///< name of the message queue + uint32_t attr_bits; ///< attribute bits + void *cb_mem; ///< memory for control block + uint32_t cb_size; ///< size of provided memory for control block + void *mq_mem; ///< memory for data storage + uint32_t mq_size; ///< size of provided memory for data storage +} osMessageQueueAttr_t; + + +// ==== Kernel Management Functions ==== + +/// Initialize the RTOS Kernel. +/// \return status code that indicates the execution status of the function. +osStatus_t osKernelInitialize (void); + +/// Get RTOS Kernel Information. +/// \param[out] version pointer to buffer for retrieving version information. +/// \param[out] id_buf pointer to buffer for retrieving kernel identification string. +/// \param[in] id_size size of buffer for kernel identification string. +/// \return status code that indicates the execution status of the function. +osStatus_t osKernelGetInfo (osVersion_t *version, char *id_buf, uint32_t id_size); + +/// Get the current RTOS Kernel state. +/// \return current RTOS Kernel state. +osKernelState_t osKernelGetState (void); + +/// Start the RTOS Kernel scheduler. +/// \return status code that indicates the execution status of the function. +osStatus_t osKernelStart (void); + +/// Lock the RTOS Kernel scheduler. +/// \return previous lock state (1 - locked, 0 - not locked, error code if negative). +int32_t osKernelLock (void); + +/// Unlock the RTOS Kernel scheduler. +/// \return previous lock state (1 - locked, 0 - not locked, error code if negative). +int32_t osKernelUnlock (void); + +/// Restore the RTOS Kernel scheduler lock state. +/// \param[in] lock lock state obtained by \ref osKernelLock or \ref osKernelUnlock. +/// \return new lock state (1 - locked, 0 - not locked, error code if negative). +int32_t osKernelRestoreLock (int32_t lock); + +/// Suspend the RTOS Kernel scheduler. +/// \return time in ticks, for how long the system can sleep or power-down. +uint32_t osKernelSuspend (void); + +/// Resume the RTOS Kernel scheduler. +/// \param[in] sleep_ticks time in ticks for how long the system was in sleep or power-down mode. +void osKernelResume (uint32_t sleep_ticks); + +/// Get the RTOS kernel tick count. +/// \return RTOS kernel current tick count. +uint32_t osKernelGetTickCount (void); + +/// Get the RTOS kernel tick frequency. +/// \return frequency of the kernel tick in hertz, i.e. kernel ticks per second. +uint32_t osKernelGetTickFreq (void); + +/// Get the RTOS kernel system timer count. +/// \return RTOS kernel current system timer count as 32-bit value. +uint32_t osKernelGetSysTimerCount (void); + +/// Get the RTOS kernel system timer frequency. +/// \return frequency of the system timer in hertz, i.e. timer ticks per second. +uint32_t osKernelGetSysTimerFreq (void); + + +// ==== Thread Management Functions ==== + +/// Create a thread and add it to Active Threads. +/// \param[in] func thread function. +/// \param[in] argument pointer that is passed to the thread function as start argument. +/// \param[in] attr thread attributes; NULL: default values. +/// \return thread ID for reference by other functions or NULL in case of error. +osThreadId_t osThreadNew (osThreadFunc_t func, void *argument, const osThreadAttr_t *attr); + +/// Get name of a thread. +/// \param[in] thread_id thread ID obtained by \ref osThreadNew or \ref osThreadGetId. +/// \return name as NULL terminated string. +const char *osThreadGetName (osThreadId_t thread_id); + +/// Return the thread ID of the current running thread. +/// \return thread ID for reference by other functions or NULL in case of error. +osThreadId_t osThreadGetId (void); + +/// Get current thread state of a thread. +/// \param[in] thread_id thread ID obtained by \ref osThreadNew or \ref osThreadGetId. +/// \return current thread state of the specified thread. +osThreadState_t osThreadGetState (osThreadId_t thread_id); + +/// Get stack size of a thread. +/// \param[in] thread_id thread ID obtained by \ref osThreadNew or \ref osThreadGetId. +/// \return stack size in bytes. +uint32_t osThreadGetStackSize (osThreadId_t thread_id); + +/// Get available stack space of a thread based on stack watermark recording during execution. +/// \param[in] thread_id thread ID obtained by \ref osThreadNew or \ref osThreadGetId. +/// \return remaining stack space in bytes. +uint32_t osThreadGetStackSpace (osThreadId_t thread_id); + +/// Change priority of a thread. +/// \param[in] thread_id thread ID obtained by \ref osThreadNew or \ref osThreadGetId. +/// \param[in] priority new priority value for the thread function. +/// \return status code that indicates the execution status of the function. +osStatus_t osThreadSetPriority (osThreadId_t thread_id, osPriority_t priority); + +/// Get current priority of a thread. +/// \param[in] thread_id thread ID obtained by \ref osThreadNew or \ref osThreadGetId. +/// \return current priority value of the specified thread. +osPriority_t osThreadGetPriority (osThreadId_t thread_id); + +/// Pass control to next thread that is in state \b READY. +/// \return status code that indicates the execution status of the function. +osStatus_t osThreadYield (void); + +/// Suspend execution of a thread. +/// \param[in] thread_id thread ID obtained by \ref osThreadNew or \ref osThreadGetId. +/// \return status code that indicates the execution status of the function. +osStatus_t osThreadSuspend (osThreadId_t thread_id); + +/// Resume execution of a thread. +/// \param[in] thread_id thread ID obtained by \ref osThreadNew or \ref osThreadGetId. +/// \return status code that indicates the execution status of the function. +osStatus_t osThreadResume (osThreadId_t thread_id); + +/// Detach a thread (thread storage can be reclaimed when thread terminates). +/// \param[in] thread_id thread ID obtained by \ref osThreadNew or \ref osThreadGetId. +/// \return status code that indicates the execution status of the function. +osStatus_t osThreadDetach (osThreadId_t thread_id); + +/// Wait for specified thread to terminate. +/// \param[in] thread_id thread ID obtained by \ref osThreadNew or \ref osThreadGetId. +/// \return status code that indicates the execution status of the function. +osStatus_t osThreadJoin (osThreadId_t thread_id); + +/// Terminate execution of current running thread. +__NO_RETURN void osThreadExit (void); + +/// Terminate execution of a thread. +/// \param[in] thread_id thread ID obtained by \ref osThreadNew or \ref osThreadGetId. +/// \return status code that indicates the execution status of the function. +osStatus_t osThreadTerminate (osThreadId_t thread_id); + +/// Get number of active threads. +/// \return number of active threads. +uint32_t osThreadGetCount (void); + +/// Enumerate active threads. +/// \param[out] thread_array pointer to array for retrieving thread IDs. +/// \param[in] array_items maximum number of items in array for retrieving thread IDs. +/// \return number of enumerated threads. +uint32_t osThreadEnumerate (osThreadId_t *thread_array, uint32_t array_items); + + +// ==== Thread Flags Functions ==== + +/// Set the specified Thread Flags of a thread. +/// \param[in] thread_id thread ID obtained by \ref osThreadNew or \ref osThreadGetId. +/// \param[in] flags specifies the flags of the thread that shall be set. +/// \return thread flags after setting or error code if highest bit set. +uint32_t osThreadFlagsSet (osThreadId_t thread_id, uint32_t flags); + +/// Clear the specified Thread Flags of current running thread. +/// \param[in] flags specifies the flags of the thread that shall be cleared. +/// \return thread flags before clearing or error code if highest bit set. +uint32_t osThreadFlagsClear (uint32_t flags); + +/// Get the current Thread Flags of current running thread. +/// \return current thread flags. +uint32_t osThreadFlagsGet (void); + +/// Wait for one or more Thread Flags of the current running thread to become signaled. +/// \param[in] flags specifies the flags to wait for. +/// \param[in] options specifies flags options (osFlagsXxxx). +/// \param[in] timeout \ref CMSIS_RTOS_TimeOutValue or 0 in case of no time-out. +/// \return thread flags before clearing or error code if highest bit set. +uint32_t osThreadFlagsWait (uint32_t flags, uint32_t options, uint32_t timeout); + + +// ==== Generic Wait Functions ==== + +/// Wait for Timeout (Time Delay). +/// \param[in] ticks \ref CMSIS_RTOS_TimeOutValue "time ticks" value +/// \return status code that indicates the execution status of the function. +osStatus_t osDelay (uint32_t ticks); + +/// Wait until specified time. +/// \param[in] ticks absolute time in ticks +/// \return status code that indicates the execution status of the function. +osStatus_t osDelayUntil (uint32_t ticks); + + +// ==== Timer Management Functions ==== + +/// Create and Initialize a timer. +/// \param[in] func function pointer to callback function. +/// \param[in] type \ref osTimerOnce for one-shot or \ref osTimerPeriodic for periodic behavior. +/// \param[in] argument argument to the timer callback function. +/// \param[in] attr timer attributes; NULL: default values. +/// \return timer ID for reference by other functions or NULL in case of error. +osTimerId_t osTimerNew (osTimerFunc_t func, osTimerType_t type, void *argument, const osTimerAttr_t *attr); + +/// Get name of a timer. +/// \param[in] timer_id timer ID obtained by \ref osTimerNew. +/// \return name as NULL terminated string. +const char *osTimerGetName (osTimerId_t timer_id); + +/// Start or restart a timer. +/// \param[in] timer_id timer ID obtained by \ref osTimerNew. +/// \param[in] ticks \ref CMSIS_RTOS_TimeOutValue "time ticks" value of the timer. +/// \return status code that indicates the execution status of the function. +osStatus_t osTimerStart (osTimerId_t timer_id, uint32_t ticks); + +/// Stop a timer. +/// \param[in] timer_id timer ID obtained by \ref osTimerNew. +/// \return status code that indicates the execution status of the function. +osStatus_t osTimerStop (osTimerId_t timer_id); + +/// Check if a timer is running. +/// \param[in] timer_id timer ID obtained by \ref osTimerNew. +/// \return 0 not running, 1 running. +uint32_t osTimerIsRunning (osTimerId_t timer_id); + +/// Delete a timer. +/// \param[in] timer_id timer ID obtained by \ref osTimerNew. +/// \return status code that indicates the execution status of the function. +osStatus_t osTimerDelete (osTimerId_t timer_id); + + +// ==== Event Flags Management Functions ==== + +/// Create and Initialize an Event Flags object. +/// \param[in] attr event flags attributes; NULL: default values. +/// \return event flags ID for reference by other functions or NULL in case of error. +osEventFlagsId_t osEventFlagsNew (const osEventFlagsAttr_t *attr); + +/// Get name of an Event Flags object. +/// \param[in] ef_id event flags ID obtained by \ref osEventFlagsNew. +/// \return name as NULL terminated string. +const char *osEventFlagsGetName (osEventFlagsId_t ef_id); + +/// Set the specified Event Flags. +/// \param[in] ef_id event flags ID obtained by \ref osEventFlagsNew. +/// \param[in] flags specifies the flags that shall be set. +/// \return event flags after setting or error code if highest bit set. +uint32_t osEventFlagsSet (osEventFlagsId_t ef_id, uint32_t flags); + +/// Clear the specified Event Flags. +/// \param[in] ef_id event flags ID obtained by \ref osEventFlagsNew. +/// \param[in] flags specifies the flags that shall be cleared. +/// \return event flags before clearing or error code if highest bit set. +uint32_t osEventFlagsClear (osEventFlagsId_t ef_id, uint32_t flags); + +/// Get the current Event Flags. +/// \param[in] ef_id event flags ID obtained by \ref osEventFlagsNew. +/// \return current event flags. +uint32_t osEventFlagsGet (osEventFlagsId_t ef_id); + +/// Wait for one or more Event Flags to become signaled. +/// \param[in] ef_id event flags ID obtained by \ref osEventFlagsNew. +/// \param[in] flags specifies the flags to wait for. +/// \param[in] options specifies flags options (osFlagsXxxx). +/// \param[in] timeout \ref CMSIS_RTOS_TimeOutValue or 0 in case of no time-out. +/// \return event flags before clearing or error code if highest bit set. +uint32_t osEventFlagsWait (osEventFlagsId_t ef_id, uint32_t flags, uint32_t options, uint32_t timeout); + +/// Delete an Event Flags object. +/// \param[in] ef_id event flags ID obtained by \ref osEventFlagsNew. +/// \return status code that indicates the execution status of the function. +osStatus_t osEventFlagsDelete (osEventFlagsId_t ef_id); + + +// ==== Mutex Management Functions ==== + +/// Create and Initialize a Mutex object. +/// \param[in] attr mutex attributes; NULL: default values. +/// \return mutex ID for reference by other functions or NULL in case of error. +osMutexId_t osMutexNew (const osMutexAttr_t *attr); + +/// Get name of a Mutex object. +/// \param[in] mutex_id mutex ID obtained by \ref osMutexNew. +/// \return name as NULL terminated string. +const char *osMutexGetName (osMutexId_t mutex_id); + +/// Acquire a Mutex or timeout if it is locked. +/// \param[in] mutex_id mutex ID obtained by \ref osMutexNew. +/// \param[in] timeout \ref CMSIS_RTOS_TimeOutValue or 0 in case of no time-out. +/// \return status code that indicates the execution status of the function. +osStatus_t osMutexAcquire (osMutexId_t mutex_id, uint32_t timeout); + +/// Release a Mutex that was acquired by \ref osMutexAcquire. +/// \param[in] mutex_id mutex ID obtained by \ref osMutexNew. +/// \return status code that indicates the execution status of the function. +osStatus_t osMutexRelease (osMutexId_t mutex_id); + +/// Get Thread which owns a Mutex object. +/// \param[in] mutex_id mutex ID obtained by \ref osMutexNew. +/// \return thread ID of owner thread or NULL when mutex was not acquired. +osThreadId_t osMutexGetOwner (osMutexId_t mutex_id); + +/// Delete a Mutex object. +/// \param[in] mutex_id mutex ID obtained by \ref osMutexNew. +/// \return status code that indicates the execution status of the function. +osStatus_t osMutexDelete (osMutexId_t mutex_id); + + +// ==== Semaphore Management Functions ==== + +/// Create and Initialize a Semaphore object. +/// \param[in] max_count maximum number of available tokens. +/// \param[in] initial_count initial number of available tokens. +/// \param[in] attr semaphore attributes; NULL: default values. +/// \return semaphore ID for reference by other functions or NULL in case of error. +osSemaphoreId_t osSemaphoreNew (uint32_t max_count, uint32_t initial_count, const osSemaphoreAttr_t *attr); + +/// Get name of a Semaphore object. +/// \param[in] semaphore_id semaphore ID obtained by \ref osSemaphoreNew. +/// \return name as NULL terminated string. +const char *osSemaphoreGetName (osSemaphoreId_t semaphore_id); + +/// Acquire a Semaphore token or timeout if no tokens are available. +/// \param[in] semaphore_id semaphore ID obtained by \ref osSemaphoreNew. +/// \param[in] timeout \ref CMSIS_RTOS_TimeOutValue or 0 in case of no time-out. +/// \return status code that indicates the execution status of the function. +osStatus_t osSemaphoreAcquire (osSemaphoreId_t semaphore_id, uint32_t timeout); + +/// Release a Semaphore token up to the initial maximum count. +/// \param[in] semaphore_id semaphore ID obtained by \ref osSemaphoreNew. +/// \return status code that indicates the execution status of the function. +osStatus_t osSemaphoreRelease (osSemaphoreId_t semaphore_id); + +/// Get current Semaphore token count. +/// \param[in] semaphore_id semaphore ID obtained by \ref osSemaphoreNew. +/// \return number of tokens available. +uint32_t osSemaphoreGetCount (osSemaphoreId_t semaphore_id); + +/// Delete a Semaphore object. +/// \param[in] semaphore_id semaphore ID obtained by \ref osSemaphoreNew. +/// \return status code that indicates the execution status of the function. +osStatus_t osSemaphoreDelete (osSemaphoreId_t semaphore_id); + + +// ==== Memory Pool Management Functions ==== + +/// Create and Initialize a Memory Pool object. +/// \param[in] block_count maximum number of memory blocks in memory pool. +/// \param[in] block_size memory block size in bytes. +/// \param[in] attr memory pool attributes; NULL: default values. +/// \return memory pool ID for reference by other functions or NULL in case of error. +osMemoryPoolId_t osMemoryPoolNew (uint32_t block_count, uint32_t block_size, const osMemoryPoolAttr_t *attr); + +/// Get name of a Memory Pool object. +/// \param[in] mp_id memory pool ID obtained by \ref osMemoryPoolNew. +/// \return name as NULL terminated string. +const char *osMemoryPoolGetName (osMemoryPoolId_t mp_id); + +/// Allocate a memory block from a Memory Pool. +/// \param[in] mp_id memory pool ID obtained by \ref osMemoryPoolNew. +/// \param[in] timeout \ref CMSIS_RTOS_TimeOutValue or 0 in case of no time-out. +/// \return address of the allocated memory block or NULL in case of no memory is available. +void *osMemoryPoolAlloc (osMemoryPoolId_t mp_id, uint32_t timeout); + +/// Return an allocated memory block back to a Memory Pool. +/// \param[in] mp_id memory pool ID obtained by \ref osMemoryPoolNew. +/// \param[in] block address of the allocated memory block to be returned to the memory pool. +/// \return status code that indicates the execution status of the function. +osStatus_t osMemoryPoolFree (osMemoryPoolId_t mp_id, void *block); + +/// Get maximum number of memory blocks in a Memory Pool. +/// \param[in] mp_id memory pool ID obtained by \ref osMemoryPoolNew. +/// \return maximum number of memory blocks. +uint32_t osMemoryPoolGetCapacity (osMemoryPoolId_t mp_id); + +/// Get memory block size in a Memory Pool. +/// \param[in] mp_id memory pool ID obtained by \ref osMemoryPoolNew. +/// \return memory block size in bytes. +uint32_t osMemoryPoolGetBlockSize (osMemoryPoolId_t mp_id); + +/// Get number of memory blocks used in a Memory Pool. +/// \param[in] mp_id memory pool ID obtained by \ref osMemoryPoolNew. +/// \return number of memory blocks used. +uint32_t osMemoryPoolGetCount (osMemoryPoolId_t mp_id); + +/// Get number of memory blocks available in a Memory Pool. +/// \param[in] mp_id memory pool ID obtained by \ref osMemoryPoolNew. +/// \return number of memory blocks available. +uint32_t osMemoryPoolGetSpace (osMemoryPoolId_t mp_id); + +/// Delete a Memory Pool object. +/// \param[in] mp_id memory pool ID obtained by \ref osMemoryPoolNew. +/// \return status code that indicates the execution status of the function. +osStatus_t osMemoryPoolDelete (osMemoryPoolId_t mp_id); + + +// ==== Message Queue Management Functions ==== + +/// Create and Initialize a Message Queue object. +/// \param[in] msg_count maximum number of messages in queue. +/// \param[in] msg_size maximum message size in bytes. +/// \param[in] attr message queue attributes; NULL: default values. +/// \return message queue ID for reference by other functions or NULL in case of error. +osMessageQueueId_t osMessageQueueNew (uint32_t msg_count, uint32_t msg_size, const osMessageQueueAttr_t *attr); + +/// Get name of a Message Queue object. +/// \param[in] mq_id message queue ID obtained by \ref osMessageQueueNew. +/// \return name as NULL terminated string. +const char *osMessageQueueGetName (osMessageQueueId_t mq_id); + +/// Put a Message into a Queue or timeout if Queue is full. +/// \param[in] mq_id message queue ID obtained by \ref osMessageQueueNew. +/// \param[in] msg_ptr pointer to buffer with message to put into a queue. +/// \param[in] msg_prio message priority. +/// \param[in] timeout \ref CMSIS_RTOS_TimeOutValue or 0 in case of no time-out. +/// \return status code that indicates the execution status of the function. +osStatus_t osMessageQueuePut (osMessageQueueId_t mq_id, const void *msg_ptr, uint8_t msg_prio, uint32_t timeout); + +/// Get a Message from a Queue or timeout if Queue is empty. +/// \param[in] mq_id message queue ID obtained by \ref osMessageQueueNew. +/// \param[out] msg_ptr pointer to buffer for message to get from a queue. +/// \param[out] msg_prio pointer to buffer for message priority or NULL. +/// \param[in] timeout \ref CMSIS_RTOS_TimeOutValue or 0 in case of no time-out. +/// \return status code that indicates the execution status of the function. +osStatus_t osMessageQueueGet (osMessageQueueId_t mq_id, void *msg_ptr, uint8_t *msg_prio, uint32_t timeout); + +/// Get maximum number of messages in a Message Queue. +/// \param[in] mq_id message queue ID obtained by \ref osMessageQueueNew. +/// \return maximum number of messages. +uint32_t osMessageQueueGetCapacity (osMessageQueueId_t mq_id); + +/// Get maximum message size in a Memory Pool. +/// \param[in] mq_id message queue ID obtained by \ref osMessageQueueNew. +/// \return maximum message size in bytes. +uint32_t osMessageQueueGetMsgSize (osMessageQueueId_t mq_id); + +/// Get number of queued messages in a Message Queue. +/// \param[in] mq_id message queue ID obtained by \ref osMessageQueueNew. +/// \return number of queued messages. +uint32_t osMessageQueueGetCount (osMessageQueueId_t mq_id); + +/// Get number of available slots for messages in a Message Queue. +/// \param[in] mq_id message queue ID obtained by \ref osMessageQueueNew. +/// \return number of available slots for messages. +uint32_t osMessageQueueGetSpace (osMessageQueueId_t mq_id); + +/// Reset a Message Queue to initial empty state. +/// \param[in] mq_id message queue ID obtained by \ref osMessageQueueNew. +/// \return status code that indicates the execution status of the function. +osStatus_t osMessageQueueReset (osMessageQueueId_t mq_id); + +/// Delete a Message Queue object. +/// \param[in] mq_id message queue ID obtained by \ref osMessageQueueNew. +/// \return status code that indicates the execution status of the function. +osStatus_t osMessageQueueDelete (osMessageQueueId_t mq_id); + + +#ifdef __cplusplus +} +#endif + +#endif // CMSIS_OS2_H_ diff --git a/RTOS_Dual_Sensor_Single_Board_Testing/Middlewares/Third_Party/FreeRTOS/Source/CMSIS_RTOS_V2/freertos_mpool.h b/RTOS_Dual_Sensor_Single_Board_Testing/Middlewares/Third_Party/FreeRTOS/Source/CMSIS_RTOS_V2/freertos_mpool.h new file mode 100644 index 0000000..cea5017 --- /dev/null +++ b/RTOS_Dual_Sensor_Single_Board_Testing/Middlewares/Third_Party/FreeRTOS/Source/CMSIS_RTOS_V2/freertos_mpool.h @@ -0,0 +1,63 @@ +/* -------------------------------------------------------------------------- + * Copyright (c) 2013-2020 Arm Limited. All rights reserved. + * + * SPDX-License-Identifier: Apache-2.0 + * + * Licensed under the Apache License, Version 2.0 (the License); you may + * not use this file except in compliance with the License. + * You may obtain a copy of the License at + * + * www.apache.org/licenses/LICENSE-2.0 + * + * Unless required by applicable law or agreed to in writing, software + * distributed under the License is distributed on an AS IS BASIS, WITHOUT + * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + * See the License for the specific language governing permissions and + * limitations under the License. + * + * Name: freertos_mpool.h + * Purpose: CMSIS RTOS2 wrapper for FreeRTOS + * + *---------------------------------------------------------------------------*/ + +#ifndef FREERTOS_MPOOL_H_ +#define FREERTOS_MPOOL_H_ + +#include +#include "FreeRTOS.h" +#include "semphr.h" + +/* Memory Pool implementation definitions */ +#define MPOOL_STATUS 0x5EED0000U + +/* Memory Block header */ +typedef struct { + void *next; /* Pointer to next block */ +} MemPoolBlock_t; + +/* Memory Pool control block */ +typedef struct MemPoolDef_t { + MemPoolBlock_t *head; /* Pointer to head block */ + SemaphoreHandle_t sem; /* Pool semaphore handle */ + uint8_t *mem_arr; /* Pool memory array */ + uint32_t mem_sz; /* Pool memory array size */ + const char *name; /* Pointer to name string */ + uint32_t bl_sz; /* Size of a single block */ + uint32_t bl_cnt; /* Number of blocks */ + uint32_t n; /* Block allocation index */ + volatile uint32_t status; /* Object status flags */ +#if (configSUPPORT_STATIC_ALLOCATION == 1) + StaticSemaphore_t mem_sem; /* Semaphore object memory */ +#endif +} MemPool_t; + +/* No need to hide static object type, just align to coding style */ +#define StaticMemPool_t MemPool_t + +/* Define memory pool control block size */ +#define MEMPOOL_CB_SIZE (sizeof(StaticMemPool_t)) + +/* Define size of the byte array required to create count of blocks of given size */ +#define MEMPOOL_ARR_SIZE(bl_count, bl_size) (((((bl_size) + (4 - 1)) / 4) * 4)*(bl_count)) + +#endif /* FREERTOS_MPOOL_H_ */ diff --git a/RTOS_Dual_Sensor_Single_Board_Testing/Middlewares/Third_Party/FreeRTOS/Source/CMSIS_RTOS_V2/freertos_os2.h b/RTOS_Dual_Sensor_Single_Board_Testing/Middlewares/Third_Party/FreeRTOS/Source/CMSIS_RTOS_V2/freertos_os2.h new file mode 100644 index 0000000..c125e2a --- /dev/null +++ b/RTOS_Dual_Sensor_Single_Board_Testing/Middlewares/Third_Party/FreeRTOS/Source/CMSIS_RTOS_V2/freertos_os2.h @@ -0,0 +1,310 @@ +/* -------------------------------------------------------------------------- + * Copyright (c) 2013-2020 Arm Limited. All rights reserved. + * + * SPDX-License-Identifier: Apache-2.0 + * + * Licensed under the Apache License, Version 2.0 (the License); you may + * not use this file except in compliance with the License. + * You may obtain a copy of the License at + * + * www.apache.org/licenses/LICENSE-2.0 + * + * Unless required by applicable law or agreed to in writing, software + * distributed under the License is distributed on an AS IS BASIS, WITHOUT + * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + * See the License for the specific language governing permissions and + * limitations under the License. + * + * Name: freertos_os2.h + * Purpose: CMSIS RTOS2 wrapper for FreeRTOS + * + *---------------------------------------------------------------------------*/ + +#ifndef FREERTOS_OS2_H_ +#define FREERTOS_OS2_H_ + +#include +#include + +#include "FreeRTOS.h" // ARM.FreeRTOS::RTOS:Core + +#include CMSIS_device_header + +/* + CMSIS-RTOS2 FreeRTOS image size optimization definitions. + + Note: Definitions configUSE_OS2 can be used to optimize FreeRTOS image size when + certain functionality is not required when using CMSIS-RTOS2 API. + In general optimization decisions are left to the tool chain but in cases + when coding style prevents it to optimize the code following optional + definitions can be used. +*/ + +/* + Option to exclude CMSIS-RTOS2 functions osThreadSuspend and osThreadResume from + the application image. +*/ +#ifndef configUSE_OS2_THREAD_SUSPEND_RESUME +#define configUSE_OS2_THREAD_SUSPEND_RESUME 1 +#endif + +/* + Option to exclude CMSIS-RTOS2 function osThreadEnumerate from the application image. +*/ +#ifndef configUSE_OS2_THREAD_ENUMERATE +#define configUSE_OS2_THREAD_ENUMERATE 1 +#endif + +/* + Option to disable CMSIS-RTOS2 function osEventFlagsSet and osEventFlagsClear + operation from ISR. +*/ +#ifndef configUSE_OS2_EVENTFLAGS_FROM_ISR +#define configUSE_OS2_EVENTFLAGS_FROM_ISR 1 +#endif + +/* + Option to exclude CMSIS-RTOS2 Thread Flags API functions from the application image. +*/ +#ifndef configUSE_OS2_THREAD_FLAGS +#define configUSE_OS2_THREAD_FLAGS configUSE_TASK_NOTIFICATIONS +#endif + +/* + Option to exclude CMSIS-RTOS2 Timer API functions from the application image. +*/ +#ifndef configUSE_OS2_TIMER +#define configUSE_OS2_TIMER configUSE_TIMERS +#endif + +/* + Option to exclude CMSIS-RTOS2 Mutex API functions from the application image. +*/ +#ifndef configUSE_OS2_MUTEX +#define configUSE_OS2_MUTEX configUSE_MUTEXES +#endif + + +/* + CMSIS-RTOS2 FreeRTOS configuration check (FreeRTOSConfig.h). + + Note: CMSIS-RTOS API requires functions included by using following definitions. + In case if certain API function is not used compiler will optimize it away. +*/ +#if (INCLUDE_xSemaphoreGetMutexHolder == 0) + /* + CMSIS-RTOS2 function osMutexGetOwner uses FreeRTOS function xSemaphoreGetMutexHolder. In case if + osMutexGetOwner is not used in the application image, compiler will optimize it away. + Set #define INCLUDE_xSemaphoreGetMutexHolder 1 to fix this error. + */ + #error "Definition INCLUDE_xSemaphoreGetMutexHolder must equal 1 to implement Mutex Management API." +#endif +#if (INCLUDE_vTaskDelay == 0) + /* + CMSIS-RTOS2 function osDelay uses FreeRTOS function vTaskDelay. In case if + osDelay is not used in the application image, compiler will optimize it away. + Set #define INCLUDE_vTaskDelay 1 to fix this error. + */ + #error "Definition INCLUDE_vTaskDelay must equal 1 to implement Generic Wait Functions API." +#endif +#if (INCLUDE_vTaskDelayUntil == 0) + /* + CMSIS-RTOS2 function osDelayUntil uses FreeRTOS function vTaskDelayUntil. In case if + osDelayUntil is not used in the application image, compiler will optimize it away. + Set #define INCLUDE_vTaskDelayUntil 1 to fix this error. + */ + #error "Definition INCLUDE_vTaskDelayUntil must equal 1 to implement Generic Wait Functions API." +#endif +#if (INCLUDE_vTaskDelete == 0) + /* + CMSIS-RTOS2 function osThreadTerminate and osThreadExit uses FreeRTOS function + vTaskDelete. In case if they are not used in the application image, compiler + will optimize them away. + Set #define INCLUDE_vTaskDelete 1 to fix this error. + */ + #error "Definition INCLUDE_vTaskDelete must equal 1 to implement Thread Management API." +#endif +#if (INCLUDE_xTaskGetCurrentTaskHandle == 0) + /* + CMSIS-RTOS2 API uses FreeRTOS function xTaskGetCurrentTaskHandle to implement + functions osThreadGetId, osThreadFlagsClear and osThreadFlagsGet. In case if these + functions are not used in the application image, compiler will optimize them away. + Set #define INCLUDE_xTaskGetCurrentTaskHandle 1 to fix this error. + */ + #error "Definition INCLUDE_xTaskGetCurrentTaskHandle must equal 1 to implement Thread Management API." +#endif +#if (INCLUDE_xTaskGetSchedulerState == 0) + /* + CMSIS-RTOS2 API uses FreeRTOS function xTaskGetSchedulerState to implement Kernel + tick handling and therefore it is vital that xTaskGetSchedulerState is included into + the application image. + Set #define INCLUDE_xTaskGetSchedulerState 1 to fix this error. + */ + #error "Definition INCLUDE_xTaskGetSchedulerState must equal 1 to implement Kernel Information and Control API." +#endif +#if (INCLUDE_uxTaskGetStackHighWaterMark == 0) + /* + CMSIS-RTOS2 function osThreadGetStackSpace uses FreeRTOS function uxTaskGetStackHighWaterMark. + In case if osThreadGetStackSpace is not used in the application image, compiler will + optimize it away. + Set #define INCLUDE_uxTaskGetStackHighWaterMark 1 to fix this error. + */ + #error "Definition INCLUDE_uxTaskGetStackHighWaterMark must equal 1 to implement Thread Management API." +#endif +#if (INCLUDE_uxTaskPriorityGet == 0) + /* + CMSIS-RTOS2 function osThreadGetPriority uses FreeRTOS function uxTaskPriorityGet. In case if + osThreadGetPriority is not used in the application image, compiler will optimize it away. + Set #define INCLUDE_uxTaskPriorityGet 1 to fix this error. + */ + #error "Definition INCLUDE_uxTaskPriorityGet must equal 1 to implement Thread Management API." +#endif +#if (INCLUDE_vTaskPrioritySet == 0) + /* + CMSIS-RTOS2 function osThreadSetPriority uses FreeRTOS function vTaskPrioritySet. In case if + osThreadSetPriority is not used in the application image, compiler will optimize it away. + Set #define INCLUDE_vTaskPrioritySet 1 to fix this error. + */ + #error "Definition INCLUDE_vTaskPrioritySet must equal 1 to implement Thread Management API." +#endif +#if (INCLUDE_eTaskGetState == 0) + /* + CMSIS-RTOS2 API uses FreeRTOS function vTaskDelayUntil to implement functions osThreadGetState + and osThreadTerminate. In case if these functions are not used in the application image, + compiler will optimize them away. + Set #define INCLUDE_eTaskGetState 1 to fix this error. + */ + #error "Definition INCLUDE_eTaskGetState must equal 1 to implement Thread Management API." +#endif +#if (INCLUDE_vTaskSuspend == 0) + /* + CMSIS-RTOS2 API uses FreeRTOS functions vTaskSuspend and vTaskResume to implement + functions osThreadSuspend and osThreadResume. In case if these functions are not + used in the application image, compiler will optimize them away. + Set #define INCLUDE_vTaskSuspend 1 to fix this error. + + Alternatively, if the application does not use osThreadSuspend and + osThreadResume they can be excluded from the image code by setting: + #define configUSE_OS2_THREAD_SUSPEND_RESUME 0 (in FreeRTOSConfig.h) + */ + #if (configUSE_OS2_THREAD_SUSPEND_RESUME == 1) + #error "Definition INCLUDE_vTaskSuspend must equal 1 to implement Kernel Information and Control API." + #endif +#endif +#if (INCLUDE_xTimerPendFunctionCall == 0) + /* + CMSIS-RTOS2 function osEventFlagsSet and osEventFlagsClear, when called from + the ISR, call FreeRTOS functions xEventGroupSetBitsFromISR and + xEventGroupClearBitsFromISR which are only enabled if timers are operational and + xTimerPendFunctionCall in enabled. + Set #define INCLUDE_xTimerPendFunctionCall 1 and #define configUSE_TIMERS 1 + to fix this error. + + Alternatively, if the application does not use osEventFlagsSet and osEventFlagsClear + from the ISR their operation from ISR can be restricted by setting: + #define configUSE_OS2_EVENTFLAGS_FROM_ISR 0 (in FreeRTOSConfig.h) + */ + #if (configUSE_OS2_EVENTFLAGS_FROM_ISR == 1) + #error "Definition INCLUDE_xTimerPendFunctionCall must equal 1 to implement Event Flags API." + #endif +#endif + +#if (configUSE_TIMERS == 0) + /* + CMSIS-RTOS2 Timer Management API functions use FreeRTOS timer functions to implement + timer management. In case if these functions are not used in the application image, + compiler will optimize them away. + Set #define configUSE_TIMERS 1 to fix this error. + + Alternatively, if the application does not use timer functions they can be + excluded from the image code by setting: + #define configUSE_OS2_TIMER 0 (in FreeRTOSConfig.h) + */ + #if (configUSE_OS2_TIMER == 1) + #error "Definition configUSE_TIMERS must equal 1 to implement Timer Management API." + #endif +#endif + +#if (configUSE_MUTEXES == 0) + /* + CMSIS-RTOS2 Mutex Management API functions use FreeRTOS mutex functions to implement + mutex management. In case if these functions are not used in the application image, + compiler will optimize them away. + Set #define configUSE_MUTEXES 1 to fix this error. + + Alternatively, if the application does not use mutex functions they can be + excluded from the image code by setting: + #define configUSE_OS2_MUTEX 0 (in FreeRTOSConfig.h) + */ + #if (configUSE_OS2_MUTEX == 1) + #error "Definition configUSE_MUTEXES must equal 1 to implement Mutex Management API." + #endif +#endif + +#if (configUSE_COUNTING_SEMAPHORES == 0) + /* + CMSIS-RTOS2 Memory Pool functions use FreeRTOS function xSemaphoreCreateCounting + to implement memory pools. In case if these functions are not used in the application image, + compiler will optimize them away. + Set #define configUSE_COUNTING_SEMAPHORES 1 to fix this error. + */ + #error "Definition configUSE_COUNTING_SEMAPHORES must equal 1 to implement Memory Pool API." +#endif +#if (configUSE_TASK_NOTIFICATIONS == 0) + /* + CMSIS-RTOS2 Thread Flags API functions use FreeRTOS Task Notification functions to implement + thread flag management. In case if these functions are not used in the application image, + compiler will optimize them away. + Set #define configUSE_TASK_NOTIFICATIONS 1 to fix this error. + + Alternatively, if the application does not use thread flags functions they can be + excluded from the image code by setting: + #define configUSE_OS2_THREAD_FLAGS 0 (in FreeRTOSConfig.h) + */ + #if (configUSE_OS2_THREAD_FLAGS == 1) + #error "Definition configUSE_TASK_NOTIFICATIONS must equal 1 to implement Thread Flags API." + #endif +#endif + +#if (configUSE_TRACE_FACILITY == 0) + /* + CMSIS-RTOS2 function osThreadEnumerate requires FreeRTOS function uxTaskGetSystemState + which is only enabled if configUSE_TRACE_FACILITY == 1. + Set #define configUSE_TRACE_FACILITY 1 to fix this error. + + Alternatively, if the application does not use osThreadEnumerate it can be + excluded from the image code by setting: + #define configUSE_OS2_THREAD_ENUMERATE 0 (in FreeRTOSConfig.h) + */ + #if (configUSE_OS2_THREAD_ENUMERATE == 1) + #error "Definition configUSE_TRACE_FACILITY must equal 1 to implement osThreadEnumerate." + #endif +#endif + +#if (configUSE_16_BIT_TICKS == 1) + /* + CMSIS-RTOS2 wrapper for FreeRTOS relies on 32-bit tick timer which is also optimal on + a 32-bit CPU architectures. + Set #define configUSE_16_BIT_TICKS 0 to fix this error. + */ + #error "Definition configUSE_16_BIT_TICKS must be zero to implement CMSIS-RTOS2 API." +#endif + +#if (configMAX_PRIORITIES != 56) + /* + CMSIS-RTOS2 defines 56 different priorities (see osPriority_t) and portable CMSIS-RTOS2 + implementation should implement the same number of priorities. + Set #define configMAX_PRIORITIES 56 to fix this error. + */ + #error "Definition configMAX_PRIORITIES must equal 56 to implement Thread Management API." +#endif +#if (configUSE_PORT_OPTIMISED_TASK_SELECTION != 0) + /* + CMSIS-RTOS2 requires handling of 56 different priorities (see osPriority_t) while FreeRTOS port + optimised selection for Cortex core only handles 32 different priorities. + Set #define configUSE_PORT_OPTIMISED_TASK_SELECTION 0 to fix this error. + */ + #error "Definition configUSE_PORT_OPTIMISED_TASK_SELECTION must be zero to implement Thread Management API." +#endif + +#endif /* FREERTOS_OS2_H_ */ diff --git a/RTOS_Dual_Sensor_Single_Board_Testing/RTOS_Dual_Sensor_Single_Board_Testing.ioc b/RTOS_Dual_Sensor_Single_Board_Testing/RTOS_Dual_Sensor_Single_Board_Testing.ioc index 4688ac6..e4a55c0 100644 --- a/RTOS_Dual_Sensor_Single_Board_Testing/RTOS_Dual_Sensor_Single_Board_Testing.ioc +++ b/RTOS_Dual_Sensor_Single_Board_Testing/RTOS_Dual_Sensor_Single_Board_Testing.ioc @@ -15,8 +15,9 @@ Dma.I2C1_RX.0.RequestParameters=Instance,Direction,PeriphInc,MemInc,PeriphDataAl Dma.Request0=I2C1_RX Dma.RequestsNb=1 FREERTOS.FootprintOK=true -FREERTOS.IPParameters=Tasks01,configUSE_IDLE_HOOK,configENABLE_FPU,FootprintOK -FREERTOS.Tasks01=defaultTask,0,1024,StartDefaultTask,Default,NULL,Dynamic,NULL,NULL;SensorReading,-3,1024,StartSensorReading,Default,NULL,Dynamic,NULL,NULL;Sensor2Reading,0,1024,StartSensor2Reading,Default,NULL,Dynamic,NULL,NULL +FREERTOS.IPParameters=Tasks01,configUSE_IDLE_HOOK,configENABLE_FPU,Queues01,FootprintOK +FREERTOS.Queues01=SensorQueue1,5,ProcessedData_HandleTypeDef,0,Dynamic,NULL,NULL +FREERTOS.Tasks01=defaultTask,24,1024,StartDefaultTask,Default,NULL,Dynamic,NULL,NULL;SensorReading,8,1024,StartSensorReading,Default,NULL,Dynamic,NULL,NULL;Sensor2Reading,24,1024,StartSensor2Reading,Default,NULL,Dynamic,NULL,NULL FREERTOS.configENABLE_FPU=1 FREERTOS.configUSE_IDLE_HOOK=0 File.Version=6 @@ -42,7 +43,7 @@ Mcu.Pin1=PC14-OSC32_IN Mcu.Pin10=PB3 Mcu.Pin11=PB8 Mcu.Pin12=PB9 -Mcu.Pin13=VP_FREERTOS_VS_CMSIS_V1 +Mcu.Pin13=VP_FREERTOS_VS_CMSIS_V2 Mcu.Pin14=VP_SYS_VS_tim6 Mcu.Pin2=PC15-OSC32_OUT Mcu.Pin3=PH0-OSC_IN @@ -145,7 +146,7 @@ ProjectManager.FreePins=false ProjectManager.HalAssertFull=false ProjectManager.HeapSize=0x200 ProjectManager.KeepUserCode=true -ProjectManager.LastFirmware=true +ProjectManager.LastFirmware=false ProjectManager.LibraryCopy=1 ProjectManager.MainLocation=Core/Src ProjectManager.NoMain=false @@ -215,8 +216,8 @@ SH.GPXTI13.0=GPIO_EXTI13 SH.GPXTI13.ConfNb=1 USART2.IPParameters=VirtualMode USART2.VirtualMode=VM_ASYNC -VP_FREERTOS_VS_CMSIS_V1.Mode=CMSIS_V1 -VP_FREERTOS_VS_CMSIS_V1.Signal=FREERTOS_VS_CMSIS_V1 +VP_FREERTOS_VS_CMSIS_V2.Mode=CMSIS_V2 +VP_FREERTOS_VS_CMSIS_V2.Signal=FREERTOS_VS_CMSIS_V2 VP_SYS_VS_tim6.Mode=TIM6 VP_SYS_VS_tim6.Signal=SYS_VS_tim6 board=NUCLEO-F446RE